Help! jabberd out of control
We have a Snow Leopard Server installation - currently running 10.6.8
We don't use, and have not enabled iChat. Nonetheless recently we've seen the server CPU running at 50% load, and upon investigating found the cause was the jabberd process continually starting and dying and restarting - and writing everything into the logs (and it was the syslogd process that was hitting the cpu most visibly).
Try as we might, we cannot find a way to stop the server thrashing away with jabberd - a pointless activity.
We've tried enabling and then disabling iChat, deleting the jabber database, and multiple restarts and so on. Nothing seems to help.
Can anyone advise on how to stop iChat / jabberd from running?
Anyone got any ideas? The problem is still there - I still can't understand why it is not possible to simply turn off Jabberd since none of its services are being used for anything.
It got into port scanning again today, so I killed the c2s process in activity monitor, and this is the trace of what happened when it restarted (as the thing won't stay killed). Not sure it is meaningful, but this one contains statements about conference.server.local not being found. Any clues there?
As always, any help most gratefully received
Nov 4 09:59:43 www jabberd/router[89779]: starting up
Nov 4 09:59:43 www jabberd/sm[89778]: starting up
Nov 4 09:59:43 www jabberd/resolver[89777]: starting up
Nov 4 09:59:43 www jabberd/s2s[89782]: starting up (interval=60, queue=60, keepalive=0, idle=86400)
Nov 4 09:59:43 www jabberd/c2s[89781]: starting up
Nov 4 09:59:43 www jabberd/sm[89778]: id: www.2gc.org
Nov 4 09:59:43 www jabberd/c2s[89781]: modules search path: /var/jabberd/modules/jabberd2
Nov 4 09:59:43 www jabberd/sm[89778]: initialised storage driver 'sqlite'
Nov 4 09:59:43 www jabberd/sm[89778]: modules search path: /var/jabberd/modules/jabberd2
Nov 4 09:59:43 www jabberd/router[89779]: loaded user table (1 users)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-last' added to chain 'sess-end' (order 0 index 0 seq 0)
Nov 4 09:59:43 www jabberd/router[89779]: loaded filters (7 rules)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'validate' added to chain 'in-sess' (order 0 index 1 seq 0)
Nov 4 09:59:43 www jabberd/c2s[89781]: initialized auth module 'sqlite'
Nov 4 09:59:43 www jabberd/sm[89778]: module 'privacy' added to chain 'in-sess' (order 1 index 2 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'roster' added to chain 'in-sess' (order 2 index 3 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'vacation' added to chain 'in-sess' (order 3 index 4 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-vcard' added to chain 'in-sess' (order 4 index 5 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-ping' added to chain 'in-sess' (order 5 index 6 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-private' added to chain 'in-sess' (order 6 index 7 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'disco' added to chain 'in-sess' (order 7 index 8 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'amp' added to chain 'in-sess' (order 8 index 9 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'offline' added to chain 'in-sess' (order 9 index 10 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'announce' added to chain 'in-sess' (order 10 index 11 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'presence' added to chain 'in-sess' (order 11 index 12 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'deliver' added to chain 'in-sess' (order 12 index 13 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'session' added to chain 'in-router' (order 0 index 14 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'validate' added to chain 'in-router' (order 1 index 1 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'presence' added to chain 'in-router' (order 2 index 12 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'privacy' added to chain 'in-router' (order 3 index 2 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'privacy' added to chain 'out-router' (order 0 index 2 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-last' added to chain 'pkt-sm' (order 0 index 0 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-ping' added to chain 'pkt-sm' (order 1 index 6 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-time' added to chain 'pkt-sm' (order 2 index 15 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-version' added to chain 'pkt-sm' (order 3 index 16 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'amp' added to chain 'pkt-sm' (order 4 index 9 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'disco' added to chain 'pkt-sm' (order 5 index 8 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'announce' added to chain 'pkt-sm' (order 6 index 11 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'help' added to chain 'pkt-sm' (order 7 index 17 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'echo' added to chain 'pkt-sm' (order 8 index 18 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'roster' added to chain 'pkt-user' (order 0 index 3 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'presence' added to chain 'pkt-user' (order 1 index 12 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-vcard' added to chain 'pkt-user' (order 2 index 5 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'amp' added to chain 'pkt-user' (order 3 index 9 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'deliver' added to chain 'pkt-user' (order 4 index 13 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'vacation' added to chain 'pkt-user' (order 5 index 4 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'offline' added to chain 'pkt-user' (order 6 index 10 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'disco-publish' added to chain 'pkt-user' (order 7 index 19 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-last' added to chain 'pkt-user' (order 8 index 0 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'session' added to chain 'pkt-router' (order 0 index 14 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'disco' added to chain 'pkt-router' (order 1 index 8 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'active' added to chain 'user-load' (order 0 index 20 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'roster' added to chain 'user-load' (order 1 index 3 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'roster-publish' added to chain 'user-load' (order 2 index 21 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'privacy' added to chain 'user-load' (order 3 index 2 seq 3)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'disco-publish' added to chain 'user-load' (order 4 index 19 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'active' added to chain 'user-create' (order 0 index 20 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'active' added to chain 'user-delete' (order 0 index 20 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'disco-publish' added to chain 'user-delete' (order 2 index 19 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'offline' added to chain 'user-delete' (order 3 index 10 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'privacy' added to chain 'user-delete' (order 4 index 2 seq 4)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'roster' added to chain 'user-delete' (order 5 index 3 seq 3)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'vacation' added to chain 'user-delete' (order 6 index 4 seq 3)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-last' added to chain 'user-delete' (order 7 index 0 seq 3)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-private' added to chain 'user-delete' (order 8 index 7 seq 1)
Nov 4 09:59:43 www jabberd/sm[89778]: module 'iq-vcard' added to chain 'user-delete' (order 9 index 5 seq 2)
Nov 4 09:59:43 www jabberd/sm[89778]: version: jabberd sm 2.1.24.1-326.6
Nov 4 09:59:44 www jabberd/s2s[89782]: attempting connection to router at 46.33.146.45, port=5347
Nov 4 09:59:44 www jabberd/s2s[89782]: [4] [router] write error: Broken pipe (32)
Nov 4 09:59:44 www jabberd/resolver[89777]: attempting connection to router at 46.33.146.45, port=5347
Nov 4 09:59:44 www jabberd/s2s[89782]: connection to router closed
Nov 4 09:59:44 www jabberd/s2s[89782]: attempting reconnect (3 left)
Nov 4 09:59:44 www jabberd/resolver[89777]: [4] [router] write error: Broken pipe (32)
Nov 4 09:59:44 www jabberd/resolver[89777]: connection to router closed
Nov 4 09:59:44 www jabberd/resolver[89777]: attempting reconnect (3 left)
Nov 4 09:59:44 www jabberd/sm[89778]: attempting connection to router at 46.33.146.45, port=5347
Nov 4 09:59:44 www jabberd/sm[89778]: [5] [router] write error: Broken pipe (32)
Nov 4 09:59:44 www jabberd/sm[89778]: connection to router closed
Nov 4 09:59:44 www jabberd/router[89779]: [46.33.146.45, port=5347] listening for incoming connections
Nov 4 09:59:44 www jabberd/sm[89778]: attempting reconnect (3 left)
Nov 4 09:59:44 www jabberd/c2s[89781]: [server.local] configured; realm=server.local, registration disabled
Nov 4 09:59:44 www jabberd/c2s[89781]: attempting connection to router at 46.33.146.45, port=5347
Nov 4 09:59:44 www jabberd/router[89779]: [46.33.146.45, port=62594] connect
Nov 4 09:59:44 www jabberd/router[89779]: [46.33.146.45, port=62594] authenticated as jabberd
Nov 4 09:59:44 www jabberd/router[89779]: [46.33.146.45, port=62595] connect
Nov 4 09:59:44 www jabberd/router[89779]: [46.33.146.45, port=62595] authenticated as conference.Server.local
Nov 4 09:59:44 www jabberd/router[89779]: [conference.Server.local] online (bound to 46.33.146.45, port 62595)
Nov 4 09:59:46 www jabberd/s2s[89782]: attempting connection to router at 46.33.146.45, port=5347
Nov 4 09:59:46 www jabberd/router[89779]: [46.33.146.45, port=62596] connect
Nov 4 09:59:46 www jabberd/resolver[89777]: attempting connection to router at 46.33.146.45, port=5347
Nov 4 09:59:46 www jabberd/router[89779]: [46.33.146.45, port=62597] connect
Nov 4 09:59:46 www jabberd/sm[89778]: attempting connection to router at 46.33.146.45, port=5347
Nov 4 09:59:46 www jabberd/router[89779]: [46.33.146.45, port=62598] connect
Nov 4 09:59:46 www jabberd/router[89779]: [46.33.146.45, port=62597] authenticated as jabberd
Nov 4 09:59:46 www jabberd/router[89779]: [46.33.146.45, port=62596] authenticated as jabberd
Nov 4 09:59:46 www jabberd/router[89779]: [46.33.146.45, port=62598] authenticated as jabberd
Nov 4 09:59:49 www jabberd/c2s[89781]: connection to router established
Nov 4 09:59:49 www jabberd/router[89779]: [c2s] online (bound to 46.33.146.45, port 62594)
Nov 4 09:59:49 www jabberd/c2s[89781]: [::, port=5222] failed to listen
Nov 4 09:59:49 www jabberd/c2s[89781]: [::, port=5223] failed to listen
Nov 4 09:59:49 www jabberd/c2s[89781]: both normal and SSL ports are disabled, nothing to do!
Nov 4 09:59:51 www jabberd/s2s[89782]: connection to router established
Nov 4 09:59:51 www jabberd/sm[89778]: connection to router established
Nov 4 09:59:51 www jabberd/resolver[89777]: connection to router established
Nov 4 09:59:51 www jabberd/router[89779]: [s2s] set as default route
Nov 4 09:59:51 www jabberd/router[89779]: [s2s] online (bound to 46.33.146.45, port 62596)
Nov 4 09:59:51 www jabberd/router[89779]: [www.2gc.org] online (bound to 46.33.146.45, port 62598)
Nov 4 09:59:51 www jabberd/router[89779]: [resolver] online (bound to 46.33.146.45, port 62597)
Nov 4 09:59:51 www jabberd/resolver[89777]: ready to resolve
Nov 4 09:59:51 www jabberd/s2s[89782]: ready for connections
Nov 4 09:59:51 www jabberd/sm[89778]: ready for sessions
Nov 4 09:59:51 www jabberd/resolver[89777]: [conference.server.local] could not be resolved
Nov 4 09:59:51 www jabberd/s2s[89782]: dns lookup for conference.server.local failed
Similar Messages
-
Click Wheel out of control!!! HELP
I recently got a white iPod Video 30GB and lately the click wheel is not responding as it should. It will not respond to the play/pause button and will sometimes do things on its own without me even touching it!!I have tried to reset it but it will not work and i have also downloaded the newest version of i-tunes
If i already have to newest version how do i reinstall it...will this remove all of my music?
Also if i try to restore it will all my songs remain in itunes or will they be erased also??
PLEASE HELP!!!By any chance, when your click wheel goes out of control is a cellphone anywhere near the iPod, because some phones especially GSM phones are known to cause the volume limit indicator to go out of control. If you find out this is the problem, just simply remember not to have your phone and iPod close together.
Hope this helps.
Regards--- jgurbisz -
can someone please help me out!!!!
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Hey, I've got a weird problem and I'm hoping someone can help. I've been using a program for about 6 months now that basically maintains a cold temperature at one side of a heat sink, and maintains a hot temperature at the other side. Then I have 25 thermocouples hooked up in between to measure temperatures so I can do analysis on the material in the middle. My problem is that all of a sudden the thermocouple readings have been out of control and unpredictable. I was adding automation to the program so it could run multiple tests at once and in the process this problem developed. The strange part is that the problem is also happening in the old version of the program now too, and that has been working perfectly for the last 6 months. I have 25 thermocouples hooked up and the temperatures will all look about right, but then 3 to 5 of them will be completely wrong randomly. What's interesting about this problem is that when I change the thermocouple that the heaters use to maintain the set point temperature, the values that were wrong become right again and some of the other thermocouples start giving invalid data. The setup uses one NI 9213 and 3 NI 9211 inputs for the thermocouples. It also uses a NI 9401 to control the heaters through a pulse width modulation electric box we have. Anyone ever experience something like this or have any ideas? Thanks for any help
Solved!
Go to Solution.Hello acolbourn,
Have you tried hooking the thermocouples that were giving you bad data back into another port that you were previously getting good data with. This will help you figure out if the problem is the thermocouples or the card inputs. Since you said the issues were fixed by replacing the thermocouples, that makes me think the issue is the thermocouples...but I would still trying plugging the "bad" thermocouples into another port just to see if you still get bad data.
How do you have your code setup to read the signal? Do you have multiple tasks reading from the different cards, or do you have one task with all the inputs on it? I noticed you are only reading one sample at a time, you may want to try reading multiple samples so that you have a buffer and are less likely to get that error. Also, if you were in highlight execution, then this error would have happened because of the how much highlight execution slows down the program, and not because of an issue with the code. When you debug with DAQmx, data overwrite errors are common. This is mainly because most debugging involves slowing down the execution to see what's going on, but slowing down the execution causes timed events to not function correctly, so this may be the cause of the -200279 error.
I hope this helps!
-Nathan H
Software Developer
National Instruments -
Out of control error : C7 camera self-snapping pho...
Hey there's once my C7 phone (untouched) keep on switching on the camera itself, and keep on snapping photos out of control until I have to plug out the battery and restart. what's worse is after i restart the camera error still exist, i dont know how to solve this camera self-snapping photos problem. I find it kind of scary when it suddenly snap photos itself in the middle of the night! Please help me in this.
I've sent it to nokia care.they upgraded the software for me, when i got home, initially i thought it was fine. BUT unfortunately the phone would still snap photos non stop at times. without a possible reason that i can think of. the button isn't stuck. then i sent it to nokia care AGAIN. they said they repaired and tested should be no problem.
This morning I just got my phone from nokia care. But tonight it still snaps photos itself.like continuously thousands of images captured if i did not switched it off.
now i still have this problem on my phone. it still crazily snaps! =(
please help me. -
My HP Pavilion dv7=-3057 laptop has an out of control volume icon and control. I believe that it is possessed . It comes on all by itself. The blue line runs back and forth eventually reaching the highest volume point. It sometimes goes off by itself only to return when I am busy doing something. Sometimes it will go away when I click on the screen the way it is supposed to. Other times it will just keep coming on over and over and over and ov... , you get the point. It is very maddening. I have recently discovered that a quick and hard slam down on the desk keeps it from coming back for longer periods but it keeps coming on over and over and over and over. I spent 2 1/2 hours with HP support but to no avail. They gave it a very good attempt. Please help as it keeps coming on over and over and over and over and over and......
Hello PJMCGEOWN,
Thank you for the details of the issue you are experiencing with your iPod nano (6th generation). I recommend following the 5 Rs for an issue like this (you can skip the step to reinstall iTunes because it is not related to the issue you described):
The 5 Rs: Reset, Retry, Restart, Reinstall, Restore
Remember these five basic suggestions if you have a problem with iPod nano. Try these steps one at a time until your issue is resolved. If one of the following doesn’t help, read on for solutions to specific problems.
Reset iPod nano. See “General suggestions,” below.
Retry with a different USB port if you cannot see iPod nano in iTunes.
Restart your computer, and make sure you have the latest software updates installed.
Reinstall iTunes software from the latest version on the web.
Restore iPod nano. See “Updating and restoring iPod software” on page 56.
You can find these steps on page 52 of the iPod nano User Guide:
iPod nano (6th generation) User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1551/en_US/iPod_nano_6thgen_User_Gu ide.pdf
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
MacBook Air is laggy and the fan is out of control
My MacBook Air 2013 is laggy and the fan is out of control. The fan is out of control even when I start my macbook up. I don't know if it has something to do with Yosemite or something else. I have tried SMC restarting, and nothing has changed. I would really love to hear if anyone else is having this problem, and I would love to hear if any of you have any tips. Also I checked if anything is using up my CPU a bunch, and nothing is out of the ordinary.
The kernel is using excessive processor cycles. Below are some possible causes for the condition.
Throttling
When it gets high temperature readings from the hardware, or low voltage readings from the battery of a MacBook, the kernel may try to compensate by interrupting the processor(s) to slow them down and reduce power consumption. This condition can be due to:
☞ a buildup of dust on the logic board
☞ high ambient temperature
☞ a worn-out or faulty battery in a portable
☞ the malfunction of a cooling fan, a temperature sensor, a voltage sensor, or some other internal component
Note that if the problem is caused by a sensor, there may be no actual overheating or undervoltage.
If the computer is portable, test with and without the AC adapter connected. If kernel_task hogs the processor only on AC power, charging is causing the machine to heat up. That behavior may be normal for some models. CPU usage should drop when charging is complete.
Apple Diagnostics or the Apple Hardware Test, though not very reliable, is sometimes able to detect a fault. For more thorough hardware testing, make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If nothing is wrong with the hardware, then whatever you can do to improve cooling may help.
Installed software
User-installed software that includes a device driver or other kernel code may thrash the kernel. That category includes virtualization software, such as Parallels and VMware, as well as most commercial "anti-virus" products. Some system-monitoring applications, such as "iStat," can also contribute to the problem. You can test for this possibility by completely disabling or removing the software according to the developer's instructions, or starting in safe mode. Note, however, that disabling a system modification without removing it or testing in safe mode may not be as easy as you think.
Corrupt NVRAM or SMC data
Sometimes the problem is cleared up by resetting the NVRAM or the SMC.
External display
Connecting an external LCD display to some MacBook Pro models while the lid is open may cause this issue. If applicable, test by closing the lid or disconnecting the display. You might get better results with a newer LED display. -
I'm really getting #$%&* off at iPhoto. I'm organizing a semi large library of just over 1000 images in approximately 120 rolls. Here's the problem: when I drag and drop images from one roll to another, at some point which I can't exactly determine, iPhoto kicks into overdrive and scrolls so fast that I can't see the rolls. If I try to reverse (inevitable as it's impossible to stop where you want when iPhoto is in Warp speed), all the while still holding down the click button on my mouse, iPhoto goes in reverse just as fast. It's impossible to stop and drop the image where I want. What usually happens is I just drop it somewhere and then have to re drag and drop to the correct roll.
Is there anyway of controlling the speed iPhoto scrolls at? When I first start dragging an image, iPhoto scrolls at an appropriate speed and slowly accelerates. Then, all of a sudden, like I said, it kicks in the afterburners and essentially becomes useless.
Any help?TD.
Thanks, that's a useful article. I'll check out the USB overdrive and see if it has some functions I'd like.
But again, for me it's not a mouse issue. Unlike the article, I never have this problem outside of the library in iPhoto.
It happened again yesterday, so let my try to describe it more carefully.
I had just uploaded some pictures from a camera card into iPhoto. They were put in a new roll (as always). I wanted to move them up to an existing roll with pictures from the same card. I selected the new roll. Then I began to drag them up to the roll where I wanted them. I had perfect control with the mouse as I moved the drag image up the screen. But the target roll was above it, off screen. When I moved to the top where iPhoto begins to scroll the rolls downward, it was fine at first. I even am very careful to just let it scroll a little at a time, to keep it from accelerating (Notice that the mouse dosn't move much here, it's iPhoto moving the rolls to put them on screen.) I had no trouble getting my target roll onscreen, highlighting the roll name, and dropping in the first set of imports.
But when I uploaded more pictures on another new roll and tried to move them, iPhoto freaked out. Again I selected the new roll and dragged it up to the top of the window. With the mouse just inside the top of the window, where it activates iPhoto to move the rolls down, I could see the open target roll approaching as rows of thumbnails lowered on the screen. BUT, when it got to where the roll name should have been, iPhoto moved into warp speed and skipped a whole screenful of rolls in a flash. The target roll was now off screen below the window. So I had to move the mouse down and let iPhoto begin scrolling the rolls up. Nice and slow, a few rolls at a time (I keep the rolls I'm not using closed.) Then JUMP - iPhoto goes into hyperspeed again and scrolls the rolls up so that the target roll is again off screen above the window. Again, I moved up to the top so iPhoto would scroll the rolls down. Back and forth, up and down, it kept flying past my target roll. With the target roll open, I could get the rows of thumbnails on screen nice and slow. But I have to reach that roll name, or my photos won't drop into the roll. It's the roll NAME that keeps getting flown past. (As if iPhoto is rejecting more changes to that roll.) If I close the target roll, I can't come within 2 or 3 rolls from it before iPhoto goes warp. Eventually I managed to get the target roll on screen while the mouse was at the top and iPhoto was scrolling down. It scrolled very quickly, but I managed to catch it before it moved off the bottom of the screen. Then I moved my mouse slowly down toward the target roll, one roll at a time (dragging all the while, never releasing) and was finally lucky enough to have the roll name of my target roll stay put and become highlighted. I dropped in the new roll, and it was correctly added to the target roll.
The third time I uploaded and tried to move was even more difficult. It took even longer to catch the target roll on screen. Lots more up and down. All of my imports yesterday (3 newly created rolls) were placed into the same roll.
Jailer Joe, is this what happens to you?
Has anyone else seen or heard of this? Any thoughts as to why iPhoto's roll scrolling goes out of control? -
When I try to drag and drop to combine events in iPhoto, the drag accelerates out of control when it reaches the top or bottom of the screen. How can I slow it down?
from iphoto Help
Album overview
A photo album in iPhoto is just like one you would create with printed photos: It’s a collection of photos you select from your library and arrange in the order you want.
You can create photo albums to:
Focus on a particular subject, such as your favorite nature photos
Group pictures that you want to send to a friend, post on a webpage, or burn to a CD or DVD
Gather a decade of anniversary photos
iPhoto has two kinds of photo albums:
Standard photo albums: You create these albums (B, shown below) by selecting particular photos. You can add new photos by dragging them to the album (or using the Add To button), and you can remove photos at any time. All adding and removing is done manually; iPhoto doesn’t update standard albums automatically as you import new photos.
Smart Albums: iPhoto creates these albums for you, based on criteria your specify. iPhoto then updates Smart Albums (A, shown above) for you as your library changes. For example, you could create a Smart Album containing:
Photos of specific people, such as your family members. As you import new photos, iPhoto uses Faces to detect your family members, and automatically adds new photos of them to the Smart Album (after you’ve confirmed the matches in Faces).
All the photos of your daughter taken on school field trips in third grade. Use Faces (to name your daughter) and keywords (to mark certain photos or events as “field trips”) to help specify the photos you want iPhoto to place in that Smart Album.
Only photos taken with a specific camera, or photos matching other Exchangeable Image File (EXIF) information.
You can make as many albums as you like, and you can include the same photo in several albums without making multiple copies of it.
After you create an album, such as “Australia Adventures,” it appears in your Source list below Albums.
In full-screen view, the album appears as a stack of photos below Albums.
To further organize your library, you can group several albums (along with slideshows and projects) into a folder. For example, you could create a folder containing several years of birthday albums or a collection of albums with photos of your camping trips.
To create a folder, see “Create a folder in the Source list and move items into it” in “Customize the Source list”.
Folders appear only in the Source list, not in full-screen view.
Note: A photo album is different from a photo book, which is a collection of photos you create to get professionally printed and bound. See this topic: Photo book overview.
Copyright © 2014 Apple Inc. All rights reserved.
LN -
Hi experts please help me out ...
Q1. : How to create Pool table and Cluster table ? (Step by step procedure)
Q2. : What is the use of table maintenance generator ,How to create a table maintenance generator ?(Step by step procedure)
Q3. : How to use table control in BDC ?
Q4. : I have a dificulty in uploading data in infotype 589 ,T-code PA30 . plz help me out .
Q5. : How to create a layout of a report (designing of a layout set)Creating Table Pools/Table Clusters
Procedure
In the initial screen of the ABAP Dictionary, choose Utilities ® Further Dictionary Objects.
A dialog box appears.
Select the object type Table pool/cluster and enter the object name. Choose .
A dialog box appears in which you must specify if it is a table pool or a table cluster.
Select the required object type and choose .
The maintenance screen for table pools/clusters appears.
The necessary entries will have been made automatically for the fields for table pools since a table pool has a fixed structure. You should not change these standard settings if you can avoid it.
The structure of a table cluster is also mostly fixed. Certain fields are therefore proposed when the table cluster is created. You can adjust this proposal to your requirements, for example by inserting further key fields. However, make sure you conform to the structure necessary for a table cluster.
Enter an explanatory text in the field Short text.
If necessary, select the activation type of the table pool/cluster with Utilities ® Activation type.
Create documentation about the table pool/cluster with Goto ® Documentation.
This documentation should describe what the table pool/cluster is used for. The documentation is also output when the table pool/cluster is printed.
Go to the maintenance screen for the technical settings by choosing Goto ® Technical settings.
In contrast to the table maintenance screen, you can only define the size category here. All other attributes of the technical settings are preset.
Activate the table pool/cluster with .
Result
The table pool/cluster is activated. You can look at the log of the activation with Utilities ® Activation log. If errors occurred during activation, the activation log is automatically displayed.
After the table pool/cluster has been activated, you need to create it in the database. To do this, use the database utility (Utilities ® Database utility).
Once a table pool contains data, it can no longer be changed.
Well the purpose of table maintainence generator is to enable the table maintenance through SM30, and to implement and validation etc on table field inputs.
SE11->Utillities->table maintainence generator
You need to enter the values of following fields:
1. Table name
2. Authorization group , and authorization object (select the suitable one )
3. Function group and package
4. Maintainence type : single or double screen maintainence view depending on the option selected.
5. Maintain screen number : you may specify a value or let the system generate one for you.
The validation code for the table entry is written in the flow logic of this screen. Even some of the fields may be made display only , by adding suitable code in the logic or directly disabling the input in table control in the layout.
>> Activate
check,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
BDC Example: Using Table Control in BDC
Among beginners, using table control in BDC is always a puzzle.
Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM. -
I am using my ipad 2 ( bought in USA) for about 3 years. 2 weeks back the touch gesture was completely out of control and the screen was jumping automatically to so many applications. I attempted to get original settings through settings menu, but unfortunately while resuming when I typed a pass code the touch gesture , without control it typed unknown passcode and while confirming the passcode as well same thing happened.
Now my Iapd2 is disabled and itunes also not recognizing my ipad.
I kindly request you to help me to fix the issue.Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Yosemite memory out of control?
Upgraded to Yosemite on MacBook Pro -- memory of kernel_task runs out of control (>6GB) in approx 48 hours after using -- initially did a clean install of Yosemite, and only loaded apps that are needed.
Etrecheck reports the following with many process having to be killed due to me pressure.
Any ideas what is triggering the men usage and eventual swap to death of the Retina?
kernel_task is at 6.8GB RAM although etrecheck doesn't report it, 1.1 GB of swap according to iStat in addition
Huge number of Page Outs -- faulty memory chips perhaps?
Problem description:
kernel_task Memory out of control
EtreCheck version: 2.1.6 (109)
Report generated 24 January 2015 12:06:39 pm AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (Retina, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro10,1
1 2.6 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 51
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD spdisplays_2880x1800Retina
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: one day 23:25:11
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.77 GB (29.98 GB free)
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Western Digital Elements 10B8 2 TB
EFI (disk3s1) <not mounted> : 210 MB
Elements (disk3s2) /Volumes/Elements : 2.00 TB (1.94 TB free)
ASMedia AS2105 1 TB
EFI (disk2s1) <not mounted> : 210 MB
Empty (disk2s2) /Volumes/Empty : 999.86 GB (364.15 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/NetShade.app
[not loaded] foo.tap (1.0) [Support]
[not loaded] foo.tun (1.0) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) [Support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.recentsd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
8 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.findmymac.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.systemstats.analysis.plist
[killed] com.apple.wdhelper.plist
8 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.bjango.istatmenusagent.plist [Support]
[running] com.bjango.istatmenusnotifications.plist [Support]
[not loaded] com.maintain.PurgeInactiveMemory.plist [Support]
[not loaded] com.maintain.Restart.plist [Support]
[not loaded] com.maintain.ShutDown.plist [Support]
[running] com.maintain.SystemEvents.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[running] com.bjango.istatmenusdaemon.plist [Support]
[running] com.bombich.ccchelper.plist [Support]
[not loaded] com.maintain.HideSpotlightMenuBarIcon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.raynersw.nshctldo.plist [Support]
[loaded] com.teamviewer.Helper.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[running] com.akamai.single-user-client.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.3.3.1 - SDK 10.7 [Support]
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
Safari Extensions: ℹ️
Open in Internet Explorer [Installed]
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Support]
Flip4Mac WMV [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
34% WindowServer
6% Google Chrome
1% Finder
1% SystemUIServer
1% fontd
Top Processes by Memory: ℹ️
1.13 GB Finder
1.10 GB WindowServer
172 MB Google Chrome
155 MB Google Chrome Helper
86 MB SystemUIServer
Virtual Memory Information: ℹ️
82 MB Free RAM
2.98 GB Active RAM
2.86 GB Inactive RAM
3.75 GB Wired RAM
1.21 TB Page-ins
3.04 GB Page-outs
Diagnostics Information: ℹ️
Jan 23, 2015, 10:09:29 AM /Users/[redacted]/Library/Logs/DiagnosticReports/SWBQuicktimeProcess_2015-01-23 -100929_[redacted].crash
Jan 22, 2015, 12:42:00 PM Self test - passed
Jan 22, 2015, 07:56:14 AM /Library/Logs/DiagnosticReports/Finder_2015-01-22-075614_[redacted].crash
Jan 22, 2015, 07:56:12 AM /Library/Logs/DiagnosticReports/loginwindow_2015-01-22-075612_[redacted].crash
Jan 22, 2015, 07:34:09 AM /Library/Logs/DiagnosticReports/WindowServer_2015-01-22-073409_[redacted].crashSorry, I replied to Barney-15E, and I am talking to infinitefx
Kernel Extensions: ℹ️
/Applications/NetShade.app
[not loaded] foo.tap (1.0) [Support]
[not loaded] foo.tun (1.0) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) [Support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Support]
One of the above kernel extensions is running wild. All of these, when loaded are part of kernel_task.
With 16GB or RAM, your kernel_task should be hovering around 1GB (plus or minus). My 16GB Macbook Pro has a 1.25GB kernel_task.
You can experiment by booting into Safe Mode, which will not load any of the 3rd party additions, and you can see if your kernel_task remains stable
<http://support.apple.com/kb/ht1564> -
Could anyone help me out here regarding frame rate?
Hi, everyone,I need help with a dynamic frame rate issue,
I have created this spinning diamond flash with a dynamic frame rate controlled by the mouse cursor.
it spins from the right to the left if the cursor is at the left side of the diamond and vice verse, and also the further away the cursor is from the middle of the diamond, the faster it spins.
it works perfectly awesome in Firefox and by itself, but when it's in IE, the cursor loses control of frame rate, so it spins at the highest frame rate regardless where the cursor is at.
I used nextFrame(), prevFrame() to do the winding and rewinding job, and frame rate gets changed in ENTER_FRAME.
I've heard some say that IE ignores frame rate per frame? is it true? if so, how do I fix it?
Could anyone please help me out with this issue?it only happens in IE.please don't cross-post. let's keep this discussion on the general flash forum.
-
Possible fix for no audio & grayed-out volume control
Hi, I just thought I'd post this fix I found for my Mac Mini losing audio and also having the volume control grayed-out as if permanently muted.
I have had this problem a couple of times on my Intel 2 GHz Core 2 Duo Mac Mini. I have tried some of the software solutions found on the web such as zapping PRAM, deleting certain Plists, etc. But in my experience the fix that has worked is to open the Mac Mini and unseat and then reseat the orange Foxconn ribbon audio cable where it connects from the Mini's audio board to what I assume is the main circuit board. Then when you reassemble and turn on your Mac, audio will be back.
My theory is that unplugging and re-plugging USB and audio cables on the back of the Mini near the audio board eventually loosens the internal ribbon cable and causes the audio to stop working. My latest attempt at a permanent solution is to have USB and analog 2.5mm stereo audio 'extender' cables plugged in on the back of my Mini, which loop forwards over the top of the Mini where they are all taped down securely. This allows me to plug and unplug cables without ever disturbing the actual USB and audio ports on the back of the Mini. I am hoping this will help avoid the lost audio & grayed-out volume control problem in the future since the connection of the internal audio ribbon cable is less likely to be disturbed. It is a somewhat ugly solution but seems to be working so far. I'll post later on if the volume control gets grayed out again even with these measures.Not on mac though
-
Hello,
i have a problem with my new MacBook Pro,
the mouse is out of control when I'm using the trackpad,
it randomly clicks, makes new folders, and it is totally out of contol,
it looks something like this:
http://www.youtube.com/watch?v=5fhMt73LtW4
when I use an Usb mouse it stops for a while,
i went to the apple store, and they replaced the trackpad, but the issue didnt go away...
i reset Pram and Smc but nothnig helped...
Can anyone help me,
TnxI have a somewhat similar annoying problem. As I type (clearly not touching the trackpad button) the mouse magically clicks. This either highlights what I just typed then deletes it with the next letter, or clicks another field so there is no cursor in the text field at all. I have applecare but I am in Thailand where I am unsure how good it will be. Also I can't be without my computer for long as I use it regularly for business.
Maybe you are looking for
-
SQLGetDiagRecW is buggy in the ODBC driver for linux
We have been using the Microsoft ODBC Driver 11 for SQL Server on Linux with a Qt based application and noticed that error messages are truncated and end with a string of garbage. We traced it down to the point where the driver manager in unixODBC
-
My bookmarks have suddenly all gone. What happened?
Just opened Safari, tapped the bookmarks icon... Lo and behold, only default bookmarks are there. Same for reading list. I used it a few hours before no problem. I didn't update anything since I last used Safari. My bookmarks seem to have vanished in
-
Application content migration manually from EP 6.0 to EP 7.0 EHP1
Hi All, We have EP 6.0 portal system running on windows 2003 server and oracle .We have another EP7.0 EHP1 portal system installed on AIX 6.1 and oracle. The present portal is connected to BW, CRM and ECC systems and also lot of customization is done
-
Received an exel document; how do I open it with Numbers format?
received an Excel document; how do I open it in Numbers format?
-
Error 13019 really getting annoyed now please help!
I have an iPod touch 1st generation. I have the latest 3.0 update and I have the latest iTunes update. Yesterday my iPod was working fine. Now, every time I try to sync music, iTunes backs up my iPod but then gives me error 13019. I know what it mean