Help: Latest OS version of Blackberry 8320

I can't find where to download the latest OS version of Blackberry 8320 (my blackberry is T-mobile but im here in the Philippines using globe sim card)
can somebody tell me where to DL? thx
Solved!
Go to Solution.

Device operating system releases are "released" by specific carriers once they have certified and trained their support techs, but still, you are able to load to any carrier's same model by following the instructions below.
See the link below, for the download and simple installation instructions.
https://www.blackberry.com/Downloads/entry.do?code=F1298750ED09618717F9C10EA8D1D3B0
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

TS1717 While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" Help please :(

While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" Help please

That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

I just upgraded phone when asked to latest Android version and now the when I am asked to enter my PIN code to unlock device there is no Enter button to push so it keeps failing. Can you help?

I just upgraded my phone when asked to latest Android version and now when I am asked to enter my PIN to unlock the device there is no Enter button or choice to push, so it continually fails. Can you help?

We want you to be able to continue to enjoy your device after the update dmeister1! I'm sorry to hear of your lock code difficulties. What make and model device is this? Do you see another type of button or screen option after you enter the passcode? How about swiping?
JonathanK_VZW
VZWSupport
Follow Us on Twitter@VZWSupport

TS1717 I have uninstalled and restalled the latest itunes version and it still says that I need to reinstall it. Can someone please help me

Recently I installed iTunes on my computer so that I could put music on my new iPad and it was fine, the next day when I went to put some more on it it asked me to download the newest version of iTunes and I did but since then I have been having trouble getting access to iTunes. I have uninstalled and reinstalled the latest itunes version and it still says that I need to reinstall it. Can someone please help me

Hi l.johnson66,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

Can't activate imessage on my daughters ipod touch 5th gen. Comes back with "An error occured during activation". It was working until I updated to latest IOS version 7.1.2. Can anyone help.

Can't activate imessage on my daughters ipod touch 5th gen. Comes back with "An error occured during activation". It was working until I updated to latest IOS version 7.1.2. Managed to update Facetime ok but can't do anything with iMessage. Can anyone help?

- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Latest version of Blackberry World?

Today Aug-1-2013 I tried to upgrade my Blackbeery world through my Wind mobile network and it shows me version 4.3.0.37. Is that the current App World version? It seems like it should be a lower version.

Hey maceblack,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
The current version of BlackBerry World is 4.3.0.32 and I would suggest downloading this version from www.blackberry.com/appworld/download
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

HT4623 I want to update my iOS software from version 4 to the latest available version, but I cannot find the software update tab in Settings- General. Pls help.

I want to update my iOS software from version 4 to the latest available version, but I cannot find the software update tab in Settings->General. Pls help.

http://support.apple.com/kb/ht4623
Sometimes older devices must be plugged into iTunes to update.
 Jackson

I purchased the Windows version of Adobe Acrobat but needed the latest Mac version. Please help.

I just purchased the month to month subscription of Adobe Acrobat, standard edition and realized it was the Windows version vs the latest mac version. I need to know how to exchange my purchase for the latest Mac version.
Thank you

Hi Krtougas,
Kindly try the URL mentioned below for further assistance.
Order product | Platform, language swap
Thanks,
Vikrantt Singh

BlackBerry 8320 max Micro SD capacity.

Hi everyone!
I'm looking to upgrade the 1GB Micro SD card in my BlackBerry Curve 8320 to allow more music tracks to be stored. I want to know what's the largest size card that will work in his model? I understand that this is dependant on the operating system version. So I downloaded the latest version of BlackBerry Desktop Manager (version 5.0.1), and this offered to upgrade the OS in my phone. The version on the phone is now v4.5.0.174 (Platform 2.7.0.105). Presumably the 8320 cannot be upgraded to version 5. I've also seen this link:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB05461
If I'm reading the information on that link correctly, I can now using a 16GB Micro SD card. Please can someone confirm this before I buy a 16GB card?
Many thanks,
Alicia.
Solved!
Go to Solution.

Yes, the MicroSD HC cards ARE what you want.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't update to latest OS version

I have a Blackberry Z10 developer edition and I want to update it to latest version (current version is 10.0.9.348), but I can't.
When I try to update it using the phone it shows a message saying that the phone is updated.
How can I update it? I can't install Whatsapp because the phone doesn't have the latest OS version.

You're a developer?
Yes that's the variant model number.
Check the intial thread here:
How to Reload your Blackberry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What is the latest Firmware version

Can anyone please advise what is the latest firmware version for the Torch 9800. Thank you.

Yep, follow this instruction:
Device operating system releases are "released" by specific carriers once they have certified and trained their support techs, but still, you are able to load to any carrier's same model by following the instructions below.
Download the OS file from the link I gave you above.
OR
First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml." (You might have another Vendor.xml file hiding on your computer. Open Windows Explorer and under the Organize button (on Windows 7, there are similar tools for Vista and XP) click on "Folder and search options." Under the View tab, make sure that your computer is set to show hidden folders and files. Once you've done this, search your C:\ drive for "Vendor.xml".)
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
**Starting with the later OS6 releases, there are now three copies of VENDOR.XML
C:\Program Files\Common Files\Research In Motion\AppLoader (for 32-bit Windows XP/Vista/7)
==========OR============
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader (for 64-bit Windows Vista/7)
C:\Documents and Settings\*name*\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
C:\Documents and Settings\*name*\Application Data\Research In Motion\BlackBerry\Loader XML
You can also just search for VENDOR.XML. Make sure that you choose ADVANCED SEARCH and include hidden files. It should show the file in at three locations. Delete every copy that it finds.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Latest OS version

What is the latest build for Q10 OS?
I have a Q10 Alfa C device OS version/build 10.1.0.809 ,
trying to use the HUB I get “Blackberry HUB, coming soon…”.
I guess there is a new OS version, but trying to update it from the device I get “You have the latest build”.
Is there a new version, and how do I update my device?
Thanks in advance
Eyal Talmor

Hey EyaIT,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
BlackBerry device software updates are determined by the network service provider. Once a network service provider pushes the update, then you will get a notification to update.
Each network service provider has a different version of BlackBerry 10.1 as well.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Update 9700 to latest os5 version

Hi,
I am running 5. .423.
How can I update to the latest os5 version?
Where can I find it?
And, if updating, how can I get apps like Word2go, Sheet2go, back again after updating?
Thanks in advance for any help
cu
michael
please give kudos to thank everyone who helped you or put you in the right direction.
please mark the thread as solved, if you found your solution.

Hello,
For the latest OS version, you must find out which carriers have that model BB and then dig into their download pages via this portal:
http://us.blackberry.com/support/downloads/download_sites.jsp
The best procedure to install (upgrade, downgrade, reload) an OS package that I know of is this one:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
If you choose an OS package that is from a carrier that is not your BBs original carrier, then insert, between steps 1 and 2, the deletion, on your PC, of a file named VENDOR.XML.
As for the ToGo apps, if you have purchased the premium version, then you can download them again from the Dataviz website and then simply enter your activation codes. If you only have the standard edition, then hopefully it is still included in the OS level you install. I don't recall if DataViz still allows free download of the Standard edition from their website or not.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator

While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message. I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly." I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!

Solving MSVCR80 issue and Windows iTunes install issues.

Help: Latest OS version of Blackberry 8320

Similar Messages

Maybe you are looking for