HELP! Lost work!!

I was typing a paper on ipages when it closed without warning. I did not save before this happened. Is there anyway to get it back?
Please I put a lot of work in to this I was so stupid not to save!

Emily,
Welcome to Apple discussions.
I don't mean to sound calloused, because I know this is a serious issue, but I'm afraid your document is toast. If you had made even one save, we could have retrieved that, but with no saves, no. Sorry.
-Dennis

Similar Messages

Help, Is there anyway to "unsave" slides....Need to recover lost work.

HELP! Is there anyway to "unsave". I accidently hit save on the wrong keynote file I had open and it overwrote all the slides I had done up to that point. A ton of lost work.
Is there anyway to recover those slides. I'm new to Mac.
Thank you!!

As long as the file is still open, you should be able to "undo" past the save point. Once you've saved the file and reopened, though, that information is no longer available in memory.

Help - lost motherboard, auto save saved older script, newer script actually with older date.

Adobe story team:
I had a best script to date, on an older hard drive and the motherboard failed on my HP tower. The sony laptop has a more recent dated script, but not the one I want. How do I replace an "older" date script, one that I want for a newer script. I don't want the newer script, I want the older one that is on a "pulled" hard drive again, from a tower that failed.
Do I save the older file on an offline, using a new ID, new password, forever changed or what can I do?
I need a fairly quick response, timing is critical. HP tower is the problem.
drgm
thanks

You have it half right. the issue is the HP tower I had failed. The mother board failed, I pulled the hard drive which is windows 7, I have a sony laptop which is in 32 bit vista, I am not sure if the different versions will be an issue. can i take a file off the pulled hard drive and put it somewhere in a directory even with the different windows vista vs windows 7 if so which file should i copy on the pulled hard drive and where do i put it on the laptop, directory plus I will go back on online save it in the clouds and reformat the laptop and go to windows 7 then go back to adobe story and go from there. thank you for your quick attention in this matter.
Respectfully,
drgm
doug morrow
Date: Tue, 24 May 2011 22:10:24 -0600
From: [email protected]
To: [email protected]
Subject: Help - lost motherboard, auto save saved older script, newer script actually with older date.
Hi
I am not sure if I understand your problem correctly, but as far as I can make out you had been working on a script and then it got autosaved and now you wish to go back to the "older" script.
In order to do so you may visit your document's history through the View->History option. There you will see older versions of your document (if you had not turned off autoversioning). You may then open an older version of the document from the panel by double clicking on it. Once on an older version you will get to see the "Make Latest" option. Clicking on that will make the "older" state of your document your "current" state and then you may proceed to edit the document as usual.
I hope this is helpful to your situation. In case you face any issues in following the mentioned steps do let us know.
Thanks
Ali
Adobe Story Team
>

Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything

Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Adobe creative cloud product online help not working. Any idea what is the reason ??

Adobe creative cloud product online help not working. Any idea what is the reason ??
I have to manually copy pdf file to open help for all suite....

Please try another browser, if still it is not working, check the internet connectivity http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
In case the issue is still not resolved, do contact Adobe Support.
Regards
Rajshree

Software update and iLife help not working in Admin account

For the last few weeks (maybe since iLife 11 was installed) software update and iLife help has quit working on the single administration account on my iMac. All works fine on the secondary accounts.
If I try to use software update it says everything is up to date, even though I know there are updates available that can be seen if checking from a different account on the machine. In iLife, if I try to access the help files it tells me I need to download them. I click to download and after a few seconds it takes me back to the front help page and I then go through the entire process again but the help download never happens. On secondary accounts the help files work no problem.
I've tried many of the tips for deleting helpfile plists, but nothing seems to work for me.
Can any kind person list for me everything I should look to delete or move in the account to get these things working again?
It would be much appreciated!

Since the issue is specific to your original user account, you can proceed in two ways. One is to log into your new account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything on that other account's list from the original account's Preferences folder into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

Cost Center and G/L account search help not working

Hi Gurus,
I am facing a problem with the search help button for cost assignment in Shop screen.
When I press the search button for cost center, there is no new screen coming up asking me the search criteria to be given as input. Same is the problem when I search for G/L accounts.
I have defined the backend RFC user as dialog user and also defined the RFC(dialog) in the SRM system for the backend RFC.
My user id has authorization object M_BBP_SHLP in my profile.
What may be the reason for this issue?
Note: I am currently using SRM5.0 system with backend R/3 4.7 version. This SRM system is already connected to another backend system ECC6.0, and the search help is working fine for those users.
Pls. guide me on how to resolve this issue.
Regds,
Ancy

Hi Ancy,
Don't give wild search. Give some words following with * like "UK*" lists all the UK Cost centers. For the G/L accounts: G/L Accounts will get updated in the SC automatically depend upon the product category what you have selected.
Check the configuration Cross Application Basic settings->Account Assignment ->Define G/L Account for the product category.
If you have maintained the configuration for the paritcular G/L Account and Product cateogyr then when G/L Account is updated automatically in the SC (Depend upon this configuration)
Kind Regards
Sameer

Aperture help not working - getting JavaScript error message

My Aperture 3 has been having a lot of strange issues lately, most, but not all of which have been cleared up by holding down command + option while starting up and going through all three of the choices there.
One problem that remains is the inability to open the Help files. I keep getting the following message:
“The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.”
Help works in all other applications, like Pages and Final Cut Pro. I don’t get JavaScript error messages in any other applications.
I’ve already done an erase and restore from a Time Machine backup, and an archive and install. I reinstalled Aperture, although not by using the Terminal command suggested in the kbase article # HT3805.
If I go the Terminal command route, will I lose all my projects, albums, and editing? What about Mobile Me galleries?
I have a guest user on the computer, and when I log on to that user and open Aperture, the Help Library works fine. So, I know the problem is in my user account somewhere, but I don’t know how to address it. Any ideas?

Welcome to the forums.
The fact that you have access to java in another user suggests that it is a local setting or preference.
In the applications folder/utilities there is an application Java Preferences, try resetting this and seeing if it works.
If not, try deleting the java preferences file in your users folder
systemHD/Users/user/Library/Preferences/com.apple.java.JavaPreferences.plist
relaunch the app Java Preferences which creates a new preferences file for you, then try Aperture again.
Let us know how this goes.
Tony

Third party app. The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

Third party app The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

Contact the developer of the app.
Restore from your backup.

HT1420 looking at the 'help' to work out how to authorise new computer so can play songs, the instructions say - open itunes - go to store tab -locate 'authorise computer'- I cannot find the 'authorise computer' part !

looking at the 'help' to work out how to authorise new computer so can play songs, the instructions say - open itunes - go to store tab -locate 'authorise computer'- I cannot find the 'authorise computer' part !

You are looking at the drop-down menus at the top of iTunes e.g. on a Mac :
If you are on iTunes 11 on Windows then press Alt-S and the Store menu should appear at the top.

Need help for working in forms

Hi i am using oracle 10g and forms 6i.
I written one query in toad it is working fine but when i put in forms-6i it's giving error. i understood that it's not taking inline views.
Here i am going to put the query can any body please help to work in forms also.
SELECT PART_NO,DESCRIPTION,DEFECT_QTY,DESTRUCTION_QTY,DEFECT_QTY-DESTRUCTION_QTY PENDING
               FROM (SELECT ESD.PART_NO,EPM.PRT_DESCRIPTION DESCRIPTION,SUM(DEFECT_QTY) DEFECT_QTY,
               NVL(SUM((SELECT SUM(DECODE(TRAN_TYPE,'E',QTY))
               FROM EIIS_DEFECTTRANTB
               WHERE REJ_NO=ESD.DRS_NO AND PART_NO = ESD.PART_NO)),0) DESTRUCTION_QTY
               FROM EIIS_SUPDEFECT_HDR ESH,
               EIIS_SUPDEFECT_DTL ESD,
     EPPS_PARTTB     EPM
               WHERE ESH.DRS_NO = ESD.DRS_NO
               AND     ESD.PART_NO = EPM.PRT_PARTNO
               AND     ESH.REJ_TYPE ='M'
               AND     ESH.STATUS = 2
               GROUP BY ESD.PART_NO,EPM.PRT_DESCRIPTION)
     WHERE DEFECT_QTY-DESTRUCTION_QTY>0
Thanks in advance...
Regards
indra

If it's working in toad it will definitely work in forms also,make sure that bind variables you are keeping should be in the data block..Try to print a message after your query so that you will know whether control is going to your query or not.
Declare
v_test         VARCHAR2(100);
Begin
SELECT PART_NO,DESCRIPTION,DEFECT_QTY,DESTRUCTION_QTY,DEFECT_QTY-DESTRUCTION_QTY PENDING
INTO
FROM (SELECT ESD.PART_NO,EPM.PRT_DESCRIPTION DESCRIPTION,SUM(DEFECT_QTY) DEFECT_QTY,
NVL(SUM((SELECT SUM(DECODE(TRAN_TYPE,'E',QTY))
FROM EIIS_DEFECTTRANTB
WHERE REJ_NO=ESD.DRS_NO AND PART_NO = ESD.PART_NO)),0) DESTRUCTION_QTY
FROM EIIS_SUPDEFECT_HDR ESH,
EIIS_SUPDEFECT_DTL ESD,
EPPS_PARTTB EPM
WHERE ESH.DRS_NO = ESD.DRS_NO
AND ESD.PART_NO = EPM.PRT_PARTNO
AND ESH.REJ_TYPE ='M'
AND ESH.STATUS = 2
GROUP BY ESD.PART_NO,EPM.PRT_DESCRIPTION)
WHERE DEFECT_QTY-DESTRUCTION_QTY>0
message('Query is' || v_test);
END;Edited by: sandy on Feb 7, 2012 11:15 AM
Edited by: sandy on Feb 7, 2012 11:16 AM

How to retreive lost work after FXP X crashes

So normally when final cut 7 crashes I would search in spotlight for the autosaved file which was being saved every 5 minutes and reopen the project.
Now I have just lost hours of work with FCP X after a crash.
I see in the final cut events folder there is a file called current version but when I open that it has a timeline that is hours lod and missing hours of work.
What is the auto save interval on this program?

Will Power PT wrote: Maybe I can invoice Apple for my hours of lost work due to the program not autosaving as they say it does !
So angry !
I understand your frustration but if you're getting crashes, Autosave problems and the like, there is more than likely some conflict on your system drive.
As a FCP & user, I'm sure you're aware that it's vital to keep everything safely backed up - on a different drive.
Rather than take it out on Apple, your energy would be put to better use if you search out the reason you're getting crashes. Autosave on FCP X is so good that even in the event of a crash, your work is normally saved to within a few moments of the crash.
If you've lost hours of work, obviously Autosave was not working for hours before the crash. Restart FCP X and check this out - do some work for a few minutes, close the application, and reopen it. If the work's there, Autosave is working and I suggest you work for twice as long, then test again.
Some people think that if the Undo button is greyed out, it's an indication that Autosave has ceased to function. This is not reliable. There are several operations that are not undoable - and also, Undo can be working fine, but Autosave isn't (I know from experience).
If Autosave is not working on your setup, create a new account on your Mac and use FCP X from there. If it works OK, there is definitely some conflict you need to address. Do you have FC Studio or an older version of FCP on the same drive as FCP X? This is known to cause problems and not advised by Apple.
A clean reinstall solved things for me. FCP X has worked satisfactorily ever since (although there are still some annoying glitches).
Andy

Fter using ccleaner Download helper Stopped Working Have tried UninStalling And Reinstalling it

After Using Cccleaner My Download Helper Stopped Working.I tried UninStalling And Reinstalling It Did not Help The Icon is Still on The Left Upper Corner But It Does not rotate

Which Firefox settings did you clear with CCleaner?
You can check for problems with the localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
*https://support.mozilla.org/kb/Toolbar+keeps+resetting
You can also try to reset the dwhelper prefs on the <b>about:config</b> page.
*http://kb.mozillazine.org/about:config
*http://kb.mozillazine.org/Resetting_preferences
*http://kb.mozillazine.org/Preferences_not_saved

HT1338 evr since i put a child lock on my Mac its never been the same .. now i cant even open my yahoo mail without it wanting me to reinstall this can someone please help me work this out

ever since i put a child lock on my Mac its never been the same .. now i cant even open my yahoo mail without it wanting me to reinstall this, can someone please help me work this out

What "child lock" are you talking about?
Do you mean you set up a Managed account (Parental Controls), or some other software?
For Parental Controls, select the account in Users & Groups and uncheck the "Enable parental controls" checkbox.

Home button in HTML Help Not Working

My Home button in HTML Help Not Working.
Also the Home option from the Options menu does not work. I receive the "This program cannot display the webpage" error.
I have the correct file name (titlepg.htm) in the Advanced Windows Ptoperties "Default" field and the "Home" field. However, I still receive the "This program cannot display the webpage" error.
How can I correct this situation? Thanks, your help is appreciated!

Can you post a couple of screen captures please?
One where you show the Project Explorer with the desired topic in view. Another where you show the dialog where you specify the Home page destination.
Another thing you may wish to try is to define a totally new window, assign the values there and ensure you point to the window in the Single Source Layout recipe.
Oh, and one other thing. Are you using RoboHelp HTML or RoboHelp for Word?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

HELP! Working on a huge file in Illustrator CC2014 and changes aren't saving.

HELP! Working on a huge file in Illustrator CC2014 and saving as an editable PDF. I made revisions which appear fine when I view the PDF in Acrobat, but not when I re-open it to continue working in Illustrator?
[Moved from the generic Cloud forum to the specific Program forum... Mod]

Shanco,
Are you saving with Create PDF Compatible File ticked, or are you using Save As and then PDF?
I hope the former.

HELP! Lost work!!

Similar Messages

Maybe you are looking for