Help! MBeanCreationException: Unable to create bean...missing create method
I am trying to configure an authentication provider with ant using the wlconfig task. This has been working fine until recently and I have no idea what could be wrong. The ant script has not changed and I'm not sure what information to post to be more useful. Hopefully someone has had this problem or can point me in the right direction.
Below is the target I'm trying to run. I fails with the following exception. I am able to configure the provider manually through the console, however, but this is not an option for our deployments:
Caused by: weblogic.management.MBeanCreationException: Unable to create new bean of type com.xxx.MyAuthenticator for myDomain:Name=myDomain,Type=Domain:missing create method
Caused by: java.lang.NoSuchMethodException: MyAuthenticator(java.lang.String,)
<target name="configure-auth-provider">
<echo message="Configuring Security Auth Provider..."/>
<taskdef name="wlconfig" classname="weblogic.ant.taskdefs.management.WLConfig" classpath="${weblogic.jar}"/>
<wlconfig url="t3://${weblogic.host}:${weblogic.listen.port}" username="${weblogic.username}" password="${weblogic.password}">
<create type="com.xxx.MyAuthenticator" domain="Security" name="MyAuthenticator" property="MyAuthenticator">
<set attribute="ControlFlag" value="OPTIONAL"/>
</create>
<query type="weblogic.management.security.Realm" domain="Security" name="MyCustomRealm">
<set attribute="AuthenticationProviders" value="MyAuthenticator"/>
</query>
</wlconfig>
<echo message="Security Auth Provider configured Successfully."/>
</target>
Hi Balaji,
LSMW using IDOC is similar to using flat file method. Here you are getting data from IDOC container and mapping data with Idoc segments insted of flatfile column.
Hope this is what you are looking for. If helpful then dont forget to reward me for that
Darshan
Similar Messages
-
Help! Unable to create new native thread
Ok I see this problem all over the web but most of the posts are many years old and still leave me a little confused. Often at random times on the same tags like CFLDAP I get the error "Unable to create new native thread". Then a few minutes later the same tag on the same page works just fine.
I have 4GB of memory in this box with 1400 MB set as the maximum Java heap size by the way.
Here are my arguments from the jvm.config file.
# Arguments to VM
java.args=-server -Xmx1400m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars,"C:\\Program Files\\Apache Software Foundation\\Apache2.2\\htdocs\\InterWeb-Prod\\includes\\classes"
Here is a typical error that comes through.
struct
Browser Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4
DateTime {ts '2010-06-23 10:07:44'}
Diagnostics unable to create new native thread null <br>The error occurred on line 122.
GeneratedContent
HTTPReferer http://--------------------/index.cfm?FuseAction=HR.main
Mailto interweb@---------------------
Message unable to create new native thread
QueryString fuseaction=ManagedLists.MailSubscriptions
RemoteAddress 192.168.250.124
RootCause struct
Message unable to create new native thread
StackTrace java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Thread.java:597) at com.sun.jndi.ldap.Connection.<init>(Connection.java:208) at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:112) at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2504) at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:263) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:76) at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667) at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288) at javax.naming.InitialContext.init(InitialContext.java:223) at javax.naming.InitialContext.<init>(InitialContext.java:197) at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:82) at coldfusion.tagext.net.LdapTag.do_ActionQuery(LdapTag.java:839) at coldfusion.tagext.net.LdapTag.doStartTag(LdapTag.java:616) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfadfunctions2ecfm1473603830$funcADLOOKUPUSERNAME.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:122) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfadfunctions2ecfm1473603830$funcADLOOKUPMULTIPLEUSERNAMES.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:54) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfdsp_managedlists2ecfm55598920.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\dsp_managedlists.cfm:232) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_switch2ecfm2121232114.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\fbx_switch.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_fusebox30_cf502ecfm1180471387._factor4(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:241) at cffbx_fusebox30_cf502ecfm1180471387._factor5(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at cffbx_fusebox30_cf502ecfm1180471387.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfindex2ecfm749274359.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\index.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:273) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
I could really use some help figuring this out. We are getting random errors a few times a day and usually in places where we are using CFLDAP.
Thanks,
DavidAbsolutely unbelievable that this has been going on for 4 YEARS and there are still NO definitive answers from Adobe!!
There's no definite answer from Adobe, because there's no definitive single question. These errors come up because - for any number of possible reasons - the JVM becomes overloaded. And it's almost always down to an issue with the application code being run, and nothing to do with CF, per-se. So what's Adobe supposed to do? Come and fix your application for you? There are plenty of diagnostic tools out there - some built into CF itself - which you could use to sort the problem out. Or you could hire someone like Mike Brunt to come and have a look at your set up. All it takes to fix these things is to actually do something about fixing it, rather than slamming one's fist on the desk saying "why doesn't Adobe do something!"
I thought - and my knowledge in the area isn't expansive - the inability to allocate threads was down to the app being choked up: threads are a finite commodity, and if requests are queuing up faster than the JVM can clear them, you're gonna get errors eventually. What causes this sort of thing? More traffic than the server can process. This could be because of server kit, or it could be due to code that doesn't scale to the requirement. Usually the latter. Basically one cannot polish a turd.
I have a 24x7 production server that services 180,000 clients in 300 countries around the clock that cannot afford to be down for more than a few minutes at a time.
I'm running Windows 2008 32-bit with 4GB of RAM because I have some graphics software that cannot tolerate a 64-bit OS. Everything has been running fine for the past few months, but now it's starting to crash more and more frequently. I have CF 8.0.1.195765 and Java 1.6.0_04
How many concurrent requests for 180000 clients generate? The number of clients matters less than how heavily the site is used. But, to be honest, I get the impression the implication is "it's a busy site", in which case I think your hardware is a bit on the lean side. Also, if it's a mission-critical app, running it on a single server is probably ill-advised, just from a fault-tolerance perspective even before one starts thinking about performance.
If I was in your situation, I'd consider the following options:
* upgrade your JVM to the most recent version (1.6.0_21?)
* put more RAM in the box, and run a second CF instance on it.
* get another box.
* refactor the environment so the graphics software runs on a different box, upgrading the CF server to 64-bit (again, with more RAM)
* run some diagnostics on the server, seeing what's taking up threads and where any bottlenecks might be
* get an expert in to do the analysis side of things.
* stop expecting Adode to fix "something".
One of my other symptoms I have noticed is that any work done using RDP starts getting really really bogged down. Opening Windows Explorer and searching for files can take minutes. Restarting the CF service will sometimes fail to complete, and you have to wait a few minutes before the manual Start option appears in the dropdown. Maybe coincidentally, the Performance Monitor will fail to add any of the ColdFusion metrics, for example Running Requests and Queued Requests, and the Event Monitor shows an error relating to an 8-byte boundary not being maintained.
You don't, by any chance, store your client variables in the registry do you? The only time I've seen this happen is when the CF box is munging the OS environment, and the only way I can think this could happen if it was clogging the registry. Never store client variables in the registry.
Adam -
Please Help! Unable to create a web service.
Hi all,
I have created a deployable proxy, a EJB with a stateless session bean, and a enterprise application project with the above ejb added. I add the deployable proxy into ejb, so that i can utilize the interface(web service) provided by the external party. After i implement the code to call the web service from external party in stateless session bean, i should create a web service by right click on session bean>New>Web Service. However, nothing was happened while a pop up window of web service creation wizard should appear. NWDS showed "End Point Doesn't Exist" when i tried to create the web service by File>New>Others>Web Service>Web Service (New VI and WSD).
Anybody have any idea of it? Your help will be apperciated.
Warmest Regards,
JaneHi all,
I notice that once i implement the interface from deployable proxy, the problem of "SEI doen't exist" appeared.
Anyone can help pls? anyone encounter the same problem before? It is urgent.
Thank in advance.
Warmest Regards,
Jane -
Help! unable to create a worspace when no workspace exists yet
HI,
I have I APEX 402 on which I want to create a workspace.
At that moment, through the APEX console, I see that I only have the INTERNAL workspace.
When I try to create a new workspace, I get the error:
ORA-20001: error 28th ORA-00955: name is already used by an existing object
Error provisioning WSQUETZAL2
There is no such workspace at that moment.
Can someone help me to identify the problem?
Thanks by advance for sharing your experience.
Kind regardsuser8058501 wrote:
HI,
I have I APEX 402 on which I want to create a workspace.
At that moment, through the APEX console, I see that I only have the INTERNAL workspace.
When I try to create a new workspace, I get the error:
ORA-20001: error 28th ORA-00955: name is already used by an existing object
This error suggests that there is a database object exists with that name.
try running this sql and you will find out:
SELECT *
FROM all_objects
WHERE object_name = 'WSQUETZAL2'; -
I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.
Assuming you're creating this event to place in your calendar, and assuming this calendar is shared with your iMac and iPad using iCloud, might the calendar be restricted on your iPhone?
Check Settings > General > Restrictions -
i have got X120e from my college with ubuntu 11.04 installed. But my half of softwares dont work on this Lunix OS so decided to install windows 7, downloaded officially as i have keys for activation.
I used USB drive to install, Windows 7 setup sucessfully started on boot up but its getting error
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
I have not connected any other devices.
My Hard disk is NOT dynamic, its basic.
I have contacted lenovo service centre, but this are taking up calls.
I am fed up of this, please help me..
I have exams coming and i need this urgently.
Solved!
Go to Solution.Hello,
Do you just want to delete the Ubuntu partition? If so, you may be able to do by booting from the Microsoft Windows 7 installation disc, pressing Shift+F10 to get to a Command Prompt, and then using the DISKPART.EXE program to erase the hard disk drive.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
COPA unable to create as charac data element with LIFNR as domain HELP ASAP
Hi
We had a data element created with KUNNR as domain.
We added to PAPARTNER STRUCUTRE and created as characteristics in our operating concern.
Now there is a need to change to LIFNR as domain instead of KUNNR.
There we created a new dala element with LIFNR as domain and added to PAPARTNER
structure and when we tried to create them as characterisc system did not let us transfer to
our operating concern.
We do not know why we are unable to create this characterisic.
When we tried to create the characteristic it was shown under 'Transfer from'
But when we wanted to move right to left it was shown under 'grey' status and not ready for transfer.
We need a solution very urgent and any help is greatly appreciated.
Thanks
RajHi
KEA0 - Display Data Structure
Now, Extras > Chars > Unlock
after this try to push from right to left
br, Ajay M -
I'm have trouble with a new install of Tiger 10.4. In the very beginning after entering my location and info, the next step is to create a user account. This is the furthest I get. It says Unexpected error has occured. ( Unable to create standard user) The only option is to select quit and it first boot up steps start all over again. Any info would help.
ThanksHi, I think you may need to start over.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the Erase tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to install. -
Need help in resolving INS 32012 Unable to create a directory error
Hi Everyone,
I am trying to install the Oracle 11g Release 2 on Ubuntu 12.04 32 bit system.
I have folder "_/u01/app/oracle/oradata_" created and user "_oracle_" is the owner..Here is the screenshot http://i46.tinypic.com/jhsqj9.jpg
But still i am receiving the error saying not able to create the folder as mentioned in this image http://i47.tinypic.com/287qiqh.png
Can any one please help me?
Thanks in Advance979600 wrote:
Does it mean oracle 11gR2 cannot be installed on ubuntu 12.04. But i have seen so many posts on internet where people had success..
Perhaps, but the fact that oracle doesn't certify their product on Ubuntu means you are pretty much on your own. Why don't you use a certified platform? Oracle Linux is certified, and the cost is US$00.00
I also read the installation guide and it does not say anything.
The error i am receiving seems to be a very trivial one may be i am not sureIt would appear that whatever account you are using to run the installer is unable to create one of the directories mentioned. Do you have the necessary privileges? Is there enough disk space?
But again, as long as you choose to ignore the prerequisite of a certified OS ..... -
My husband and I recently bought Ihones. We are trying to create Apple IDs so we can download apps. I was able to create a ID, however we only have one email address that we use so are unable to create an ID for him. Any assistance with this situation will be appreciated.
Apple ID FAQs
http://support.apple.com/kb/HE37
Apple ID Manage Account
http://www.apple.com/support/appleid/manage/
Rescue Email
http://support.apple.com/kb/HT5312 -
Help me !(After Effect warning: Unable to create font.)
I'm using Adobe After Effect CS4. It worked pretty well but today, when i lauch it, a message appeared. The message said: "After Effect warning: Unable to create font".Then i searched google and tried many ways: reinstall, restart windows,etc...but it didn't work.After that, i tried to lauch other Adobe Programs like Adobe Premiere, Adobe Photoshop. I lauched it and work space appeared but there aren't any words in the button on the work space.What should i do now?!
P/S: I using Windows 7.watch this video on youtube:
http://www.youtube.com/watch?v=g02zasHbsi8
read the description to download the fonts
instalation the fonts:
1.download the fonts (links on description)
2.if you done,install all
AND ENJOY!!!!
notes:
install quicktime,use the custom themes (do not change your computer themes) -
Unable to Load Database/Unable to create database.
RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild. -
Unable to create Disc Image from DVD
I get the following error when trying to make a copy of a family wedding DVD. I'm using Disc Utility and creating the image as a DVD/CD master (.cdr) file. It gets to about 3/4 of the way and then gives the following error.
The internal drive is a PIONEER DVD-RW DVR-K05
Sep 10 22:13:24: Disk Utility started.
Creating Image “Wedding of xxx & xxx.cdr”
Reading VOLUME_IDENTIFIER (Apple_UDF : 0)...
Unable to create “Wedding of Sarah & Federico.cdr” - Input/output error.
I've tried twice now and the same error. Looks like I might have to use Toast/Popcorn etc?
Thanks,
Darren
iMac G5 2.1GHz 1Gb RAM 260Gb HDD Mac OS X (10.4.7)I do not know what that error means. However, if you open up the Disk Utility & go into it's Help Menu & in the search field type duplicating a CD or DVD. There you will find detailed instructions on how to create a disc image from a DVD.
Good possibility your answer may be found there and/or there may have been something you missed in creating a disc image.
Good luck. -
Unable to create a file in Application Server using OPEN DATASET stattement.
I am unable to create a file in Application Server using the following statement.
OPEN DATASET filename FOR OUTPUT
IN TEXT MODE ENCODING DEFAULT
MESSAGE msg.
The message I'm getting is "Permission Denied". I have checked authorisation using SU53 which says "The last authorization check was successful". Please help.You can use following code to capture the error.
TRY.
OPEN DATASET filename FOR OUTPUT IN BINARY MODE MESSAGE V_MSG.
CATCH CX_ROOT
INTO EXCEPTION.
CALL METHOD O_EXCEPTION ->IF_MESSAGE~GET_TEXT
RECEIVING
RESULT = V_MSG.
MESSAGE v_msg
TYPE 'E'.
ENDTRY.
You can capture error in v_msg.
Following are the exceptions for the same:
Exceptions
Catchable Exceptions
CX_SY_FILE_OPEN
Cause: The file is already open.
Runtime Error: DATASET_REOPEN
CX_SY_CODEPAGE_CONVERTER_INIT
Cause: The desired conversion is not supported. (Due to specification of invalid code page or of language not supported in the conversion, with SET LOCALE LANGUAGE.)
Runtime Error: CONVT_CODEPAGE_INIT
CX_SY_CONVERSION_CODEPAGE
Cause: Internal error in the conversion.
Runtime Error: CONVT_CODEPAGE
CX_SY_FILE_AUTHORITY
Cause: No authorization for access to file
Runtime Error: OPEN_DATASET_NO_AUTHORITY
Cause: Authorization for access to this file is missing in OPEN DATASET with addition FILTER.
Runtime Error: OPEN_PIPE_NO_AUTHORITY
CX_SY_PIPES_NOT_SUPPORTED
Cause: The operating system does not support pipes.
Runtime Error: DATASET_NO_PIPE
CX_SY_TOO_MANY_FILES
Cause: Maximum number of open files exceeded.
Runtime Error: DATASET_TOO_MANY_FILES Non-Catchable Exceptions
Cause: An attempt was made to open a pipe that is already open.
Runtime Error: DATASET_PIPE_POSITION
Hope that will help you.
Please reward if useful. -
Acrobat 8 Pro now unable to create pdf files
Been using Acrobat 8 for well over a year. Installed new release of AutoCAD 2012, now unable to create pdf files from AutoCAD or MS Office programs. Can anybody help?
You may still want to at least give a repair a shot. Won't hurt and sometimes customer suport (I assume you mean Adobe customer support?) will miss some things. I believe in your version you can find it under the Help menu.
BtlMage918 wrote:
No because the
customer support person I spoke with first said the problem was within the
creation portion of the program and did not fell that reinstallation or
deactivate/activate would resolve.
Charles Blake
Annette Miller Architects
204 S. Ludlow St., Suite 310
Dayton, Ohio 45402
937.228.7841
<http://www.amillerarchitects.com/> www.amillerarchitects.com
Maybe you are looking for
-
Error while attaching Calendar
Hi How can we attach the calendar with forms10g.I downloaded from otn the latest version and attached the calendar90.pll, which contains the Date_LOV package in my application and called DATE_LOV in KEY-LISTVAL trigger but its giving error Date_LOV i
-
When opening my Outlook 2010 with new added e-mail account with Exchange Server supplied by my employer, I have to click manually on my standard e-mail account for checking mail. Do I have to upgrade my Microsoft Office 2010 or how can I make my Outl
-
Customers recievable as of date
Dear Experts, I have created this query for Customers Recievables, the problem that I am having is that it only shows the open invoices even if it was closed after the date in my parameter. my requirements is like the Built-In Customers Recievables A
-
WLC 7.0.98.0 CPU high utilization
I could not find anything wrong with the show tech on WLC. Client complaints CPU high utilization. Please help!
-
Direct materials in classic scenario - any restriction in backend?
Dear SAP gurus, I have read that when we use classic scenario, procurement for direct materials actually using extended classic. But as per SRM 7 EHP 2 the true classic PO (leading PO in ECC) now possible. I just want to confirm is there any restrict