Help me about oracle connect poo in wls5.1l!!

Help!
I can not create oracle connection pool using the following
directive in my weblogic.properties of wls5.1:
weblogic.jdbc.connectionPool.oraclePool=\
url=jdbc:oracle:thin:@oracle.myserver.com:1521:mydb,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=10,\
capacityIncrement=1,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=house_dict,\
props=user=system;password=******;server=mydb
But I can connect to the database in my servlet/jsp using oracle:thin
connect method, Why???
The library I used is oracle's classes111.zip
Help me please!!!!

Remove the ';server=mydb' from the props.
It would help if you included the error message from the weblogic log file.
Mike
"Killwin" <[email protected]> wrote:
Help!
I can not create oracle connection pool using the following
directive in my weblogic.properties of wls5.1:
weblogic.jdbc.connectionPool.oraclePool=\
url=jdbc:oracle:thin:@oracle.myserver.com:1521:mydb,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=10,\
capacityIncrement=1,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=house_dict,\
props=user=system;password=******;server=mydb
But I can connect to the database in my servlet/jsp using oracle:thin
connect method, Why???
The library I used is oracle's classes111.zip
Help me please!!!!

Similar Messages

Anybody can help me about WPA Connection?

Hi Everyone,I've one lenovo G550 notebook and i use Pardus via OS(for informatin visit:www.pardus.org.tr) but i have a problem with wpa connections.I'm connect and getting ip but I'm not connect to internet.
I give you some output on terminal.I hope you will help me.
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:26:22:D7:EC:6F
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:40 errors:0 dropped:0 overruns:0 frame:0
TX packets:40 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2400 (2.3 Kb) TX bytes:2400 (2.3 Kb)
pan0 Link encap:Ethernet HWaddr 1A:7C:20:D6:A0:2C
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap:Ethernet HWaddr 00:1E:65:F7:A9:2E
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wmaster0 Link encap:UNSPEC HWaddr 00-1E-65-F7-A9-2E-00-00-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Device 0a74 (rev a2)
01:00.1 Audio device: nVidia Corporation Device 0be3 (rev a1)
04:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
07:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
ifconfig
eth0 Link encap:Ethernet HWaddr 00:26:22:D7:EC:6F
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:32 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1920 (1.8 Kb) TX bytes:1920 (1.8 Kb)
wlan0 Link encap:Ethernet HWaddr 00:1E:65:F7:A9:2E
inet addr:172.30.2.175 Bcast:172.30.3.255 Mask:255.255.255.255
inet6 addr: fe80::21e:65ff:fef7:a92e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3913 errors:0 dropped:0 overruns:0 frame:0
TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:736587 (719.3 Kb) TX bytes:13156 (12.8 Kb)
wmaster0 Link encap:UNSPEC HWaddr 00-1E-65-F7-A9-2E-39-32-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

there are security levels for wpa connection. such as low- normal - high ( 64 bit -128 bit -256 bit )
if you select 64 bit secure method, you need to enter 8 characters for password. if you enter 7 and save and exit, some computers can connect but some not. make sure you have 8- 16- 32 characters and entered correctly.
to check if it's password issue, disable the secure connection and try again. if it doesn't work, we can try some other solutions.

Information about Oracle Utilities CCB SDK

Hi,
Colud you please help me about Oracle utilities(CC&B) Software Development Kit (SDK).
1.Information of Oracle CC&B SDK ?
2.Verision of the Oracle CC&B SDK?
3.Size of the Oracle CC&B SDK?
4.Where can i downlaod the Oracle CC&B SDK & schema editor?(Actually we tried in edelivery.oracle.com but we find only v1.5.20 and current we are using cc&b version 2.3.0)
5.Development Guide?
Thanks in Advance
Siva

I had these problems too..
I suppouse you're installind TAX (ETM) so the library you need is lib/spl-tax-2.2.0.jar'
On the other hand, the othe 'lib/ojdbc5-11.1.0.6.0.jar' eclipse is asking for. I changed it for 'lib/ojdbc5-11.1.0.7.0.jar'
After change these libs I can run the generator and deploy scripts even when i don't know jet how to develop.
Dou you have some cookbooks for developing (algorithnms, modify native clases, ect) you'd like to share??
Thanks a lot.

Certificates in lieu of Oracle connection Manager for our Applets -- Help!!

I support an application named IDEA out of New York. The IDEA application is an INTRANET application for use within our company Firewall.
Currently, the IDEA application's front end resides on a Windows 2000 Server running IIS 5 and JRun 3.0. The back-end runs on Oracle 8.1.7 database on a UNIX Database Hosting Utility (DHU). Our applets communicate with the back-end database using Oracle Connection Manager that is installed on the Web Host.
We are trying to migrate to the DWeb environment (Linux cluster). The linux cluster is running Apache Tomcat. We have been told that installing Oracle connection manager is not a viable solution (our company does not support it). Because of this our applets cannot communicate with our database. Below is a brief description of this limitation and also the work-around.
====================================================================================================================================================
Connecting to the Database through the Applet
The most common task of an applet using the JDBC driver is to connect to and query a database. Because of applet security restrictions, unless particular steps are taken an applet can open TCP/IP sockets only to the host from which it was downloaded (this is the host on which the Web server is running). This means that without these steps, your applet can connect only to a database that is running on the same host as the Web server.
If your database and Web server are running on the same host, then there is no issue and no special steps are required. You can connect to the database as you would from an application.
As with connecting from an application, there are two ways in which you can specify the connection information to the driver. You can provide it in the form of host:port:sid or in the form of a TNS keyword-value syntax.
For example, if the database to which you want to connect resides on host prodHost, at port 1521, and SID ORCL, and you want to connect with user name scott with password tiger, then use either of the two following connect strings:
using host:port:sid syntax:
String connString="jdbc:oracle:thin:@prodHost:1521:ORCL";
conn = DriverManager.getConnection(connString, "scott", "tiger");
using TNS keyword-value syntax:
String connString = "jdbc:oracle:thin:@(description=(address_list=
(address=(protocol=tcp)(port=1521)(host=prodHost)))
(connect_data=(sid=ORCL)))";
conn = DriverManager.getConnection(connString, "scott", "tiger");
If you use the TNS keyword-value pair to specify the connection information to the JDBC Thin driver, then you must declare the protocol as TCP.
However, a Web server and an Oracle database server both require many resources; you seldom find both servers running on the same machine. Usually, your applet connects to a database on a host other than the one on which the Web server runs. There are two possible ways in which you can work around the security restriction:
You can connect to the database by using the Oracle8 Connection Manager.
or:
You can use a signed applet to connect to the database directly.
These options are discussed in the next section, "Connecting to a Database on a Different Host Than the Web Server".
Connecting to a Database on a Different Host Than the Web Server
If you are connecting to a database on a host other than the one on which the Web server is running, then you must overcome applet security restrictions. You can do this by using either the Oracle8 Connection Manager or signed applets. ====================================================================================================================================================
It was suggested that we implement signed applets (it is our only alternative at this time). This is where, hopefully, you can help me. We are unfamiliar with using certificates and signing applets. We need to obtain certificates that will allow our applets to connect to our oracle database on the DHU. What kind of certificates do we use? Are their coding examples of how to use these certificates? We have a CA within our company but they cannot tell us what kind of certificates we need. How many certificates do we need? Do we install any certificates on the backend database server? Any information would be greatly appreciated. We are basically trying to get our applet to work outside the sandbox by establishing a connection to the database server.Thanks in advance for your time.

or:
You can use a signed applet to connect to the database directly.
These options are discussed in the next section, "Connecting to a Database on a Different Host Than the Web Server".
If you want to connect to the database from the applet there is a third option.
Since this is an intranet application you have control over the desktops using this
application. In our company the jre ignores signed applets (as it should) because
it gives control to the user to run potentially harmfull applets from the Internet.
The way to dish out special privileges to applets is the policy, put a policy file on
you intranet and have the jre use it by specifying its URL in the java.security.
Here is some more info about security configuration of the jre:
http://forum.java.sun.com/thread.jspa?threadID=646161&tstart=45
reply 3
We use Oracle jinitiator to run Oracle forms but I am not involved in that project
and do not know a lot about it. It does perform quite good though.

Oracle connection problem - please help

Hi.
On my Win2k machine I first installed Oracle Developer 6.0 in C:\ORANT.
After that I also installed Oracle in C:\ORACLE.
I always used sqlplus C:\ORACLE\BIN\SQLPLUS.EXE till now. Now I have to
use Forms builder to complete my homework. The problem is that I can't
connect to my Oracle database with Forms builder.
I try to solve my problem by comparing runs of C:\ORACLE\BIN\SQLPLUS.EXE
with C:\ORANT\BIN\SQLPLUS.EXE (from developer tools). So I execute:
- sqlplus my_user/my_pass@testconn
in each directory. In the C:\ORACLE\BIN (using sqlplus that come with
Oracle database) all works fine, while in C:\ORANT\BIN (using sqlplus
that come with development tools) I get an error:
- ORA-12705: invalid or unknown NLS parameter value specified
I try to fix the problem by editing copying connection data from
C:\ORACLE\network\ADMIN\tnsnames.ora to
C:\ORANT\NET80\ADMIN\tnsnames.ora, but this didn't help.
Can someone help me?
My tnsnames.ora:
TESTCONN.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SID = MYSID)
[i]Long postings are being truncated to ~1 kB at this time.

Hi Damir,
Basically, it's possible the NLS_LANG parameter for your
database install is invalid or isn't a available default
value. This is a known problem.
I didn't any specific about one connection route working
and the other not, as in your case. However, I did find
some information on this problem when connecting through
Developer to a DB install.
The quick fix is to ensure your client initialisation
files have the 'NLS_LANGUAGE' parameter commented out.
If the client doesn't have an "NLS_LANGUAGE" parameter
entry the client and server use the language parameter
indicated by the server.
If that doesn't work (or you want to keep this parameter)
check the NLS_LANG parameter in the DB using your working
SQL*Plus connection. Try a default value like:
AMERICAN_AMERICA.US7ASCII
Also, you can try this:
SELECT * FROM sys.v$nls_valid_values;
Whatever you set for NLS_LANG should exist in the values
returned for this query, otherwise you'll get the error.
Unfortunately, resolving NLS_LANG issues is not always
this easy. If commenting out or changing the parameters
above still doesn't fix the problem, it is possible you need to reinstall the DB and choose the default language option. How you do this depends on the installer options
for DB version you are using.
One last point - I suggest you post your query to the
Forms & Reports forums here on OTN too. This forum is
ideally for Designer, rather than Developer questions.
Hope all this helps.
Regards,
Dominic
Designer Product Management
Oracle

What's the best approach for handeling about 1300 connections in Oracle.

What's the best approach for handling about 1300 connections in Oracle 9i/10g through a Java application?
1.Using separate schema s for various type users(We can store only relevant data with a particular schema. Then No. of records per table can be reduced by replicating tables but we have to maintain all data with a another schema Then we need update two schema s for a given session.Because we maintain separate scheama for a one user and another schema for all data and then there may be Updating problems)
OR
2. Using single schema for all users.
Note: All users may access the same tables and there may be lot of records than previous case.
What is the Best case.
Please give Your valuable ideas

It is a true but i want a solution from you all.I want you to tell me how to fix my friends car.

Not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits
I am not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0 after the forms upgrade 10.1.2.3.0 as per note:Upgrading OracleAS 10g Forms and Reports to 10.1.2.3 (437878.1)
Java/jre upgraded to 1.7.0.45 and JAR files regenerated(without force option). Able to opne forms without any issues.
A)
$ORACLE_HOME/bin/frmcmp help=y
FRM-91500: Unable to start/complete the build.
B)
$ORACLE_HOME/bin/rwrun ?|grep Release
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov
28 14:20:45 2013
Is this an issue? Could anyone please share the fix if faced the similar issue earlier.
Thank You for your time
Regards,

Hi Hussein,
You mean reboot the solaris server and then start database and applications services. We have two databases running on this solaris server.
DBWR Trace file shows:
Read of datafile '+ASMDG002/test1/datafile/system.823.828585081' (fno 1) header failed with ORA-01206
Rereading datafile 1 header failed with ORA-01206
V10 STYLE FILE HEADER:
        Compatibility Vsn = 186646528=0xb200000
        Db ID=0=0x0, Db Name='TEST1'
        Activation ID=0=0x0
        Control Seq=31739=0x7bfb, File size=230400=0x38400
        File Number=1, Blksiz=8192, File Type=3 DATA
Tablespace #0 - SYSTEM rel_fn:1
Creation   at   scn: 0x0000.00000004 04/27/2000 23:14:44
Backup taken at scn: 0x0001.db8e5a1a 04/17/2010 04:16:14 thread:1
reset logs count:0x316351ab scn: 0x0938.0b32c3b1
prev reset logs count:0x31279a4c scn: 0x0938.08469022
recovered at 11/28/2013 19:43:22
status:0x2004 root dba:0x00c38235 chkpt cnt: 364108 ctl cnt:364107
begin-hot-backup file size: 230400
Checkpointed at scn: 0x0938.0cb9fe5a 11/28/2013 15:04:52
thread:1 rba:(0x132.49a43.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
Plugged readony: NO
Plugin scnscn: 0x0000.00000000
Plugin resetlogs scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign creation scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign checkpoint scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Online move state: 0
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
Executing SYNC actions
----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK'
(SUCCESS, 0 csec) -----
Executing ASYNC actions
----- END DDE Actions Dump (total 0 csec) -----
ORA-01186: file 1 failed verification tests
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1:
'+ASMDG002/test1/datafile/system.823.828585081'
ORA-01206: file is not part of this database - wrong
database id
Thanks,

About opening connection to oracle on 64 bit machine

I am totally lost on how can i connect to oracle .
The system configuration is :
64 bit Operating system with windows xp
Most my application like vb6,autocad are 32 bit application.I have download 64 bit oracle client.I have a dll which is build on a 32 bit software ie vb6.Using thie dll i am trying to open oracle connection and everytime open it fails.so i went and download 32 bit Microsoft windows oracle client 11g and added my tnsnames.oro files in the one too.But everytime i run my program which is a 32 bit to call this dll it fail to make connection to oracle.
Please help me out...................................................
Desperate to get some solution.

user11079165 wrote:
I am totally lost on how can i connect to oracle .ok
But everytime i run my program which is a 32 bit to call this dll it fail to make connection to oracle.what are the exact ora errors that you get in your connection attempts ?
Desperate to get some solution.don't be , everything will be ok. hold on. :)

Is there any problem about 10I oracle connect to 9I oracle in BW

we want to know about
creating a new source system on BW in AIX pointing to an Oracle
database, bw oracle use 10i database , connect to
9idatabase(Windows) to get data for BW,
can you tell me how 10I oracle connect to 9I oracle ??
is there any problem about 10I oracle connect to 9I oracle ??If
there exit problem ,how to deal with it ??
Thank you
ALLEN ZHOU

Hi
You may face some problem in BASIS side especially if one version is Open SQL and other in Old SQL
Regards
N Ganesh

I need a help about Oracle Ultra Search

Someone help me find out document about Oracle Ultra Search installation step by step clearly .
Thanks.

Have you tried the Oracle Ultra Search Administrator's Guide?
http://download-west.oracle.com/docs/cd/B14099_15/portal.1012/b14041/toc.htm
Beth

When i am installing software and shows the sign of connect phone to i tunes when connect it shutdown and never again help me about this

when i am installing software on my iphone 3g after sometime it shows the it shows the sign to connect iphone to itunes on my window when i am connect it shutdown and never on again ples help me about this problem i am worried.
thanx

Hello Aamir,
It sounds like at this point your phone will not turn on. I would like to recommend the troubleshooting from this article named:
iPhone: Hardware Troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Can anyone help me about create my reports on Oracle XE?

Hi,
I want to report with this product and I can created. But my report is search all items. I want to do this. Example our customers are log on this report via internet and they can search their billing. I can not create like this. I'm creating only ; customer logon this report but they can all data on this report
My View is like this:
View Name : Customer_Billing
Customer_Number
Customer_Name
Customer_Surname
Customer_Bill
This report can be this: Customer visit our pages and log on that link and they write customer number and push to search button. then report working and only display writen customer number....
Please help me about this. How can I do that
Note: My Oracle XE Version 10.2.0.1.0
Message was edited by:
EqinnoX

I'm assuming that they are not logging into the application...
There are many ways you could accomplish this. Here is one.
You have a report, and text item, and a button...
1. set the query in the report to reference the text item in the "WHERE" clause of the select statement.
2. set the display condition of the report to a where exists query and write a select statement that again references the text item in the "WHERE" clause. This will keep the entire report from being displayed unless a correct entry is entered in the text item.
Now when they click the button, if there is a match the report will display with the correct information.
This would be better if the users were logging in with a username/password. Then you could reference the user in the query and prevent access to the wrong data.

Oracle connection failing..URGENT-PLS HELP

added these files in the classpath : using oracle 9i , jdk1.4.2
C:\Documents and Settings\Sampathkumar\Desktop>set CLASSPATH=c:\oracle\ora92\jdb
c\lib\ojdbc14.jar;c:\oracle\ora92\jdbc\lib\nls_charset12.jar;%CLASSPATH%;
submitted this code as a sample to test the conection
import java.sql.*;
public class test{
public static void main(String[] args) throws SQLException,ClassNotFoundException {
//load oracle driver
Class.forName("oracle.jdbc.OracleDriver");
System.out.println("Driver Loaded");
//connecTION to the sample database
String url = "jdbc.oracle:thin:@SEC_MEC-MS3:1521:global.oracle";
Connection conn=DriverManager.getConnection (url,"sam","aaj");
System.out.println("Database connection successful");
//create a statement
Statement stmt = conn.createStatement();
ResultSet rset =stmt.executeQuery("select sysdate from Dual");
while (rset.next())
System.out.println(rset.getString(1));
}//end of test DB class
give the error stack
C:\Documents and Settings\Sampathkumar\Desktop>java test
Driver Loaded
Exception in thread "main" java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at test.main(test.java:17)

added these files in the classpath : using oracle 9i
, jdk1.4.2
C:\Documents and Settings\Sampathkumar\Desktop>set
CLASSPATH=c:\oracle\ora92\jdb
c\lib\ojdbc14.jar;c:\oracle\ora92\jdbc\lib\nls_charset
12.jar;%CLASSPATH%;
submitted this code as a sample to test the
conection
import java.sql.*;
public class test{
public static void main(String[] args) throws
SQLException,ClassNotFoundException {
//load oracle driver
Class.forName("oracle.jdbc.OracleDriver");
System.out.println("Driver Loaded");
//connecTION to the sample database
String url =
=
"jdbc.oracle:thin:@SEC_MEC-MS3:1521:global.oracle";
Connection conn=DriverManager.getConnection
tion (url,"sam","aaj");
System.out.println("Database connection
on successful");
//create a statement
Statement stmt = conn.createStatement();
ResultSet rset =stmt.executeQuery("select
ry("select sysdate from Dual");
while (rset.next())
System.out.println(rset.getString(1));
}//end of test DB class
give the error stack
C:\Documents and Settings\Sampathkumar\Desktop>java
test
Driver Loaded
Exception in thread "main" java.sql.SQLException: No
suitable driver
at
at java.sql.DriverManager.getConnection(Unknown
known Source)
at
at java.sql.DriverManager.getConnection(Unknown
known Source)
at test.main(test.java:17)__________________________________________________________
You are loading the driver classes ok. But is that the appropriate driver for youir database?
I know Oracle is phasing out the .zip version classes12.zip, but have tried them
here the possible drivers
ojdbc14.jar Oracle 9. and higher and jk1.4 and higher
ojdbc14_g-1.jar - include extentsion Oracle 9. and higher and jk1.4 and higher
classes12.zip - Primarily used with oralce 8.* and jk1.2.* - jtk1.3.*

About the "Omit Oracle Connection Name" property

now every time i connect to the db using components of Oracle.DataAccess i get the 603 error, but using System.Data.OracleClient and setting "Omit Oracle Connection Name = true" in the connection string it works. then i go back to use the Oracle.DataAccess and set "Omit Oracle Connection Name = true" in the connection string, when connecting a exception pops up saying "Omit Oracle Connection Name" is invalid .
so what the "Omit Oracle Connection Name" is, is there any way i can solve the 603 error using Oracle.DataAccess?
thx in advanced

"Omit Oracle Connection Name" is not a connection string attribute of ODP.NET (Oracle Data Provider for .NET) hence it can not be used.
What is the version of database you are attempting to connect to? What is the version of ODP.NET are you using?
Also check following post if it can be of any use -
ORA-603 Problem

A question about Oracle 1g R2 Enterprise Edition license

Dear all,
I have a question about Oracle license and I would appreciate if you could kindly help me.
I have installed an Oracle server (11g R2 Enterprise edition) on a linux virtual machine. The pc used for this purpose
is my enterprise laptop (therefore a professional and not a personal Computer). However, I use the this Oracle Server
only for learning purpose, that is, only for running the examples in my Oracle Press books (SQL, PL/SQL and some
administration tasks) just for learning the stuff.
There is absolutely no data related to my enterprise, stored or used on this server. Whenever I want to work with my
enterprise data, I use the Oracle server of the enterprise which has of course the appropriate license. So as I said, I
use this Enterprise server on the virtual machine only for running queries/programs in my Oracle Press books just for
learning and I'm the sole person who uses this server (no remote connection for other users).
The reason for which I needed to install this server on my PC was that our DBA couldn't provide a training environment
for me with all required privileges and functionalities.
Am I supposed to buy a license for this installed Enterprise server on my virtual machine?
Thanks in advance,
Dariyoosh

drop.any wrote:
From OTN license agreement:
>
LICENSE RIGHTS
We grant you a nonexclusive, nontransferable limited license to use the programs only for the purpose of developing, testing, prototyping and demonstrating your application, and not for any other purpose. If you use the application you develop under this license for any internal data processing or for any commercial or production purposes, or you want to use the programs for any purpose other than as permitted under this agreement, you must obtain a production release version of the program by contacting us or an Oracle reseller to obtain the appropriate license. You acknowledge that we may not produce a production release version of the program and any development efforts undertaken by you are at your own risk. We may audit your use of the programs. Program documentation, if available, may accessed online at http://otn.oracle.com/docs.
Ownership and Restrictions We retain all ownership and intellectual property rights in the programs. The programs may be installed on one computer only, and used by one person in the operating environment identified by us. You may make one copy of the programs for backup purposes.
You may not:
- use the programs for your own internal data processing or for any commercial or production purposes, or use the programs for any purpose except the development of your application;
- use the application you develop with the programs for any internal data processing or commercial or production purposes without securing an appropriate license from us;
- continue to develop your application after you have used it for any internal data processing, commercial or production purpose without securing an appropriate license from us, or an Oracle reseller;
- remove or modify any program markings or any notice of our proprietary rights;
- make the programs available in any manner to any third party;
- use the programs to provide third party training;
- assign this agreement or give or transfer the programs or an interest in them to another individual or entity; - cause or permit reverse engineering (unless required by law for interoperability), disassembly or decompilation of the programs;
- disclose results of any program benchmark tests without our prior consent.
>Hello again,
Thank you both of you for your help. As it seems to me
>
We grant you a nonexclusive, nontransferable limited license to use the programs only for the purpose of developing, testing, prototyping and demonstrating your application, and not for any other purpose.
>
I think self training can be considered in this category, therefore I think there is no need to buy a license for that.
Kind regards,
Dariyoosh

Help me about oracle connect poo in wls5.1l!!

Similar Messages

Maybe you are looking for