When i am installing software and shows the sign of connect phone to i tunes when connect it shutdown and never again help me about this
when i am installing software on my iphone 3g after sometime it shows the it shows the sign to connect iphone to itunes on my window when i am connect it shutdown and never on again ples help me about this problem i am worried.
thanx
Hello Aamir,
It sounds like at this point your phone will not turn on. I would like to recommend the troubleshooting from this article named:
iPhone: Hardware Troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thank you for using Apple Support Communities.
All the very best,
Sterling
Similar Messages
-
i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?
I have had this happen to me on 3GS, 4 and 4s. Usually the solution is one of the following:
1- If your volume indicator says headphones even though they are not plugged in, then:
Stick your headphones into the headphone jack and then remove quickly.
2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
Hope one of these works for you -
My iphone 3GS keeps freezing and showing the apple logo during phone calls. Can anybody help plese ? Bja
Hiya thankyou for the answer.
Trying to set it up as a new device but can't find the backup to save it.
I have no "mediasync" folder in my library/application support. Did these folders get moved around with Lion?
Thankyou again, -
I have 10Gb of photos on my iphone, so can choose only half of it (5Gb) and share it with icloud and leave the rest on my phone storage, or i must share all photos and videos (my whole camera roll)
No. Your iCloud account only includes your the camera roll photos stored in the backup. And they can only be accessed by restoring the backup to your phone. Also, if you delete any photos from your camera roll and continue to back up, the backup that contained the deleted photos would be overwritten by one that doesn't and they would be lost.
If you want to save some of them and delete them from your phone, import them to your computer as explained here: http://support.apple.com/kb/HT4083.
Another option is to import all of them to your computer and delete them from your phone, then put the ones you want on your phone in a folder and sync them back to your phone by selecting the folder on the photos tab of your iTunes sync settings and syncing. The advantage of this approach is that synced photos are placed in an album called Photo Library, which is not included in the iCloud backup (since they are already backed up on your computer), thereby saving space in your iCloud account (which only backs up camera roll photos). -
I've tried charging it for days. it doesnt do anything. I'll hold the home and power button for 10 seconds and it just shows the apple logo and then goes black. and when i plug it into my computer it wont recognize it.
Does it charge when you connect it to the adapter? If yes, make sure it is charged for about 10min, then connect in recovery mode, shown here: iPhone and iPod touch: Unable to restore
If still not recognized, try the troubleshooting here: iOS: Device not recognized in iTunes for Windows -
Why does computer come on by itself and shows the sign in page prompt
After shutting down my computer at night, in the morning I find it awake and booted and displaying the user password prompt page. Why is this happening and how do i stop it. Thank you for your help.
hello purenrgy7, sorry your problem doesn't sound like an issue that would be related to firefox or mozilla products. unfortunately we cannot help with common computer problems (refer to our [[Forum rules and guidelines]]) - please consult a general windows forum like http://answers.microsoft.com or http://www.bleepingcomputer.com/forums instead.
-
My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.
I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
Very frustrating, hope someone else has some ideas!
PS My MacBook was about same age, and "expired" in exactly the same way as yours. -
firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.
Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems. -
I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway installing PSE-10 or uninstalling it. If I send the PDF file that has been automatically converted to a PSE-10 the person I send the file to can not open it because they do not have PSE-10. What can I do to stop PSE-10 from converting my PDF files? Don't tell me to upgrade PSE-10 I tried their on-line program and it is too advance for a hobby photographer like myself and their Help Desk is impossible to reach.
Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha -
i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support. -
Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only
Hi, yes preferences sees there is a second display it recognises what make of monitor it is etc but I just get a blank blue screen on the monitor when I change it to the hdmi setting! I have tried with mirroring on and off, rearranging the displays in the preference window and lots of different resolution settings but with no difference.
An old MacBook connects fine so the monitor and hdmi port must be okay. I'm sure we have used the cable before but it could have been with the previous MacBook Air. The current one I'm using is a mid 2011 version running lion and is (according to software update) all up to date.
Any thoughts or help would be appreciated! -
When trying to install new App. The Apple ID shows my old one not the new ID which is verified. Please advise
Go to Setings>iTunes and App stores and make sure you are signed into your account
-
The icons wiggle and show the x but they will not delete when I press the X. Also the home button will not cancel the action.
Try doing a hard reset: Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After this, try again to delete the app.
If that doesn't solve the issue, you could also try backing up the device and restoring the device as new.
In that case, follow the steps in: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
If you're not able to restore the device, this one might help: http://support.apple.com/kb/HT1808
Using his article will erase everything on the device, so make sure you have a backup!
Good luck -
just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.
Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690�
In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime.
Maybe you are looking for
-
Affinity queries ("customers who bought this item also bought...")
Hi, Do you know the feature of many web shops, where you can see similar items (i.e. "customers who bought this item also bought...")? A simple approach would be to return similar items from the latest orders. What I would like to list are products,
-
How do i connect a hp photosmart c4385 to a windows 2010 system
My HP Photosmart C4385 printer only supports up to Windows 2000. How can I connect a new computer to the network for my home. It is wireless as well
-
What's the maximum size a varchar2 variable can hold for and NDS Stmnt?
What's the maximum size a varchar2 variable can hold for and NDS Statement? I read that NDS is good for doing EXECUTE IMMEDIATE on statements that aren't too big. The 10g PL/SQL manual recommends using DBMS_SQL for statements that are too large, but
-
Is anyone having difficulties with reply to all? When I receive a message and reply to all, I am cc'd. It's a pain because it creates an extra email to myself that I just have to delete. It was not happening with my iphone 3GS and began when I purc
-
Encore Adobe Dynamic Link Audio problem
I have a multiple video files that I have put together in Premiere. The are HD Dolby 5.1 sound. I have about 10 of these together. So I export them to Encore using the Adobe Dynamic Link. I built the menu system. When I burn the dvd and try it. I