Help me for sure battery health..!?
Hello my battery informatin is :
Battery Information:
Model Information:
Serial Number: D86048602G1DCMFAK
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 301
Hardware Revision: 000a
Cell Revision: 175
Charge Information:
Charge Remaining (mAh): 2074
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 3770
Health Information:
Cycle Count: 781
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1055
Voltage (mV): 7610
This is OK !?
Or how much to reaplaced battery !?
And pls tips for battery life ....!?
The full charge capacity is small, but if the battery life is enough for you, you can continue using your Mac, as OS X says that the battery is working.
If you think that the battery life is small, take the Mac to an Apple Store or reseller and you will get your battery replaced for $129. To know more about your battery, see > http://www.apple.com/batteries/notebooks.html
Similar Messages
-
Hi, I just want to know. If everyday fully charge my iphone, 2 times per day . It's okay for my battery health? Any tips for battery health?
See here for battery tips http://www.apple.com/batteries/iphone.html
-
Is it good for the battery health to recharge it when it is at 79% or 50% etc. ?
Is it good for the battery health to recharge it when it is at 79%, 50% etc. ?
I use the battery like this (the people from the apple store where i bought my notebook said it was ok like this):
-durring the week i use my battery every day till it deplets arround 5 % then i recharge it (when prompted with the recgarge message). Then when i get home i plugg my machine and weight till its fully charged, then i use it plugged with the charger.
-In the weekend i keep my machine plugged in with the charger -
Alternative methods for checking battery health
Model: 8922-A26, 3000 C200
So in the process of trying my hardest to keep a recalcetrant C200 from it's sixth visit to the service centre in less than 11 months of ownership, I am trying to see if there's anything I can do to improve its battery life beyond the pitiful 30min i'm currently getting.
Being a longtime thinkpad customer, I tried all the usual methods including the three-cycle power down and drain trick to recondition the battery, with no solution and ran through all the possible solutions in MIGR-63114 to no success at all.
Except one - verify the health of the unit's battery, an online tool which uses ActiveX applets to work some black magic and tell you if it's pooped or not. However, it seems this tool is broken.
It's not working in either IE6 or 7, and despite prompting you to install all the AX components nothing ever happens no matter how long you leave it. And if sitting around isn't good enough for you, you can stare at the broken image which is supposed to be a progress bar.
Does anyone have any alternative ways of checking the battery health on a C200 or firing off some reconditioning tools to save me being another week without this unit? I don't mind dealing with the phone support group, but i'll be darned if I let the service techs near the unit again because I just know my luck will see them fix or replace the wrong part - for the third time in a row.
Michael Harris
"Call the spirits, ask them to bring pizza"I don't believe there is a way but more than likely an Apple Store can check it if there is one nearby.
I've seen a post or two here reporting the same and the solution provided (which claimed to help) was using the iPhone until the battery is depleted causing the iPhone to turn off. Plug it in and allow it to charge completely.
And if you haven't already done so, it can't hurt to Reset and/or Restore your iPhone. -
About a month ago i updated my zen touch to pfs firmware, since then when i plug my zen touch to zen organiser(not media explorer)it seems to not detect my device.But before i updated it would pop up on the side saying zen touch detected and all my songs would appear on th screen ready to be organised. Now it just sits there lifeless, i use media explorer still but its alot harder than the organiser.
Please help
Missing organiser.Reinstall the Media Explorer suite software.
Jason -
How to turn on Optimized Battery Health Mode
I recently bought a G505 laptop and a popup window tells me I should use the "Optimized Battery Health Mode".
However, nowhere on the popup does it tell me how to do this.
I have searched online and also with the Lenovo Solution Center and find there are all kinds of battery modes
that are spoken of and various ways to access them. However, I cannot find "Optimized Battery Health Mode" anywhere!
I see "Balanced Mode" and "Power Saver Mode" but no "Optimized Battery Health Mode" anywhere.
If I go to the Lenovo Solution center, I cannot find battery settings anywhere under the system tab.
Can anyone tel me how to get my G505 laptop into "Optimized Battery Health Mode"?
Many thanks!I finally figured it out. If anyone else needs to do this here how I did it.
1) Right click on the battery icon on toolbar, then choose power options
2) From here click on "Change Plan Settings"
3) From here click "Change Advanced Power Settings"
4) This opens up a small window, choose the "Lenovo Energy Management" tab on top
5) Click the "Enable Lenovo Energy Management" button
6) This opens up yet another window with the option for "optimized Battery Health"
Wow, they sure don't make it easy do they? -
IdeaPad V570 'Best battery health'
On the energy management panel under the option for "Best battery health," it says this setting will limit charge capacity to 0-45% or 0-50%. Is there any way to raise this limit above 50%? I'd ideally like to limit the charge to about 80%.
Thanks.
Solved!
Go to Solution.Hi Peano and welcome to the community,
Limiting the charge to 50% has been shown to give the battery its longest life. Older versions kept the charge at 80%.
The only way to keep the charge at 80% using your version would be to change the setting to runtime and charging the battery to 80%, then changing the setting back to best battery health. Your battery will lose its charge gradually.
Probably about 1% a day.
Older versions might or might not work with your machine. If you do decide to experiment, uninstall your current version first before you install a new one. Also keep in mind that the Hotkeys utility is incorporated into the Energy Management.
Another version might make things work funny.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Battery health=40% time for a new battery?
So from tiger cache cleaner I got the following information
capacity=1773 mAh
cycle count = 327
current capacity= 1770mAh
voltage= 16466mV
absoluteMaxCapacity=4400 mAh
Battery charge= 99%
Battery Health=40%
My ibook g4 1.2ghz is about 16 months old and has been used everyday. I have frequently left it on and have plugged it in when it is low or out of batteries.
Recently for about the past 3 weeks, while showing a full or 60% charge, my ibook will shut down at random. When I start it up again, it will stay on for 10 to 20 minutes unplugged before it shuts off again. When plugged in it works fine. I have not tried a new battery, I have not reset the PMU (it said all Ram disks will be permenently erased?) and it will not let me calibrate the battery because it will not stay on long enough to drain it. When I push the batteries button I get two green lights out of four.
is it time for a new battery? Is says I have done 327 cycles.
thanks for all the help.It's supposed to keep 80% capacity after 300 charge cycles.
A PMU reset is in order:
http://docs.info.apple.com/article.html?artnum=2238
Don't worry about a RAM disk. You have to have created one in order for there to be one to be erased. If you don't know what one is, you don't have one.
Try resetting the PMU and see if that will allow you to calibrate the battery.
If things still aren't working right, a new battery is probably in order.
Read Apple's recommendations for maximizing battery life and lifespan here:
http://www.apple.com/batteries/notebooks.html -
I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!
http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
hello my iphone 3gs just been stolen how can i block the iphone and how could i track it i don't know for sure if i have find my iphone? please help i got many accounts on it and i don't have a passcode :((
It was never free for the 3GS.
It is if the initial sign-up is done on an iPhone 4, iPad or iPod touch 4th gen.
From http://support.apple.com/kb/HT4436:
After I sign up for Find My iPhone for free, can I use it on other iOS devices?
Yes, if your devices are running iOS 4.2. For example, you can sign up for Find My iPhone for free on your iPad and use the same account information to sign in to MobileMe on your iPhone 3GS and turn on Find My iPhone. -
Battery Health monitor for iphone 4
hi i would just like to know if there is something that can measure the battery health of iphone 4 i did purchase accura because it appeared to show battery health in the ad on app store but it didn't
There's an app called 'iBackupBot' for windown and mac, by a company called iCopyBot. It has a free trial and allows you to measure the current battery capacity, they have a guide here.
It worked for me with an iPhone 5, iOS 6.1.4- you do have to quit itunes and unlock the device for it to work. -
iweb isn't recognizing my hosting password. Any help? I have reset it and am for sure it is the correct one.
Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
OT -
Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...i paid $50.00 for an OLD windows computer with 512 mb of ram and it is much faster..is this normal for mac?? Also, apple says there is nothing they can/wil do even though i got the apple care....i mean really? $50.00 for 2002 computer with windows XP and 512mb of ram and a single core processor......faster and more usable than $1400.00 computer with 4gb of ram and dual core processor.....***???
Willtc92 wrote:
Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...i paid $50.00 for an OLD windows computer with 512 mb of ram and it is much faster..is this normal for mac??
obviously not.
Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...
Give examples of how it is slow. -
How do I find out for sure exactly which camera I have it is not on your list? HELP!
My specification sheet with my Sony camera HDR-XR160 says system NTSC color, EIA standards HDTV 1080/60i, 1080/60p. You say it is very important to pick the right information first before you get started. I guessed and now the video stops and I have to play with it to make it get started going again. I could guess again but that is too much work to keep guessing. I would like to know for sure. Any help would be very much appreciated.
If you want to edit the video from that camcorder in Premiere Elements, you should only shoot your video in 1080/60i. (If you have more than one audio option, select stereo.)
Then, when you start your Premiere Elements project, select the project settings for Full AVCHD 1920x1080 30 fps.
Assuming your system is powerful enough to work with full AVCHD (which takes a lot of power!), you should have no problems editing this video in version 10. -
I need an application which turn off WiFi automaticly when my Ipod Toch is locked (for save battery charge)
I hate every time to turn it off manually when I go sleep please help ASAP!!!
If I forget to turn of wifi on my device after my 8hour dream it's battery will be discharged. and ofcourse alert do not ring. pls help urgent!!!
ThanksSuggestion:
Turn off your device before bed.
Maybe you are looking for
-
Show a blob( pdf ) from db-table in the clients browser/ web.show_document
my env: Database R11_2 on one windows-host-machine AS 10 g on another windows-host-machine I can show files in Forms10g from inside the AS with web.show_document, that works fine but now I want to show a ( pdf or text ) File from a BLOB in a Table in
-
I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?
-
Implementing a Vector3f class and Vectoroperations
Hello, I implemented a class that represents a vector in 3d space. It has the three float members x,y,z Now I am courious wether I should implement some of the Mathematic operations as Methods of this class like: Vec3f getInverse() float getlength ()
-
User Exit for S_PH9_46000222 Family Members
Hello everybody! I am currently in S_PH9_46000222 Family Members transaction, I am getting all the family members for each employee, but I am wondering if there is any User Exit that can help me run the report and add the Company Code, or Personnel a
-
after running through the forums i couldn't find anything that related to my question. so here it is. to search for a substring, do i have to search for each individual character or is there an easier method... for example: String john,paul,mark,fabi