HELP ME PLEASE: MY TIME CAPSULE IS NO LONGER WORKING FOR ME

Due to a recent move,  my Time Capsule doesn't seem to have the range & strength that it once did.
- A Local Internet Provider (MEDIACOM) installed their Router for our Internet/Internet Phone Service. 
- Due to the required use of the Provider's Router, I had to set my Time Capsule in "Bridge Mode" to function. 
- Although my computer can recognize BOTH (MEDIACOM & my Time Capsule) networks, I select & use my Time Capsule for my Home Wireless Network. 
- It seems to me, that in "Bridge Mode" my Time Capsule doesn't have the range & strength that it once did. For whatever the reason, I need to increase my Wireless range. 
- I ONLY use the Wireless WiFi (My Home Network) to access my e-mail/Internet from my iMac or IPAD.  All "other" Internet access (streaming) is done through my TV system, which is hard wired to the Internet.  Again, the Internet is hard-wired and directly connected to the TV's receiver. Thus, there isn't a huge demand for my Wireless Home Network. It's also password protected so nobody else is using it.
- I will admit that I'm now in a much bigger house (about twice as big as the previous home).  Also, I usually have to access it on the opposite end of the house.
How do I extend my Wireless range? Any suggestions, How To's, or useful websites would be most appreciated. In other words, what hardware do I need to purchase & how do I set it up?  My Tech knowledge is very limited. I think the solution will need to also be wireless because the distance is to great for ETHERNET.  That is, unless I can use what is already wired into my home.  For example, I'm told there is a CAT 5 Access point (whatever that is) very near the vicinity of where I need wireless access.  Would the purchase of another Time Capsule potentially solve my problem?

Due to a recent move,  my Time Capsule doesn't seem to have the range & strength that it once did.
It must have the same strength it always had. .but the new environment blocks or absorbs wifi.. some houses are like a black hole.. nothing gets out.
- It seems to me, that in "Bridge Mode" my Time Capsule doesn't have the range & strength that it once did. For whatever the reason, I need to increase my Wireless range.
Being in bridge or being in router mode makes no difference whatsoever to wireless output.. however range is affected dramatically by environment and perhaps by operating next to a much higher wireless power device in the Mediacom router.
How do I extend my Wireless range?
If I give you useful sites.. apple mods will delete my posts.. so you should google yourself for "extend lan"
  That is, unless I can use what is already wired into my home.  For example, I'm told there is a CAT 5 Access point (whatever that is) very near the vicinity of where I need wireless access. 
This is the best method.. you do not need another TC.. plug the existing one into the Cat5 access point on the wall.. plug the other end into any LAN Port on the Mediacom router.. and as long as the cable is in good condition it will work great.
Make sure you are doing the setup correctly.
You bridge the TC.
You also create a wireless network.. it can be the same name as the mediacom router or different .. that is up to you. You do not attempt to extend the wireless.. this is most important.
Try it now.. all you need is a patch cord or two.

Similar Messages

  • How to put time capsule AP in 40 MHz (for 2.4G)

    Hello,
    Can anybody help me in putting time capsule AP in 40 MHz (for 2.4G). I am able to put 40MHz in 5G using airport utility in XP by checking use width channel.
    Thanks in advance,
    Vishal

    Can anybody help me in putting time capsule AP in 40 MHz (for 2.4G).
    Sorry, but this is not possible as the Time Capsule does not support wide channels on the 2.4 GHz radio.

  • My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    What model is your TC? What is the firmware?
    I recommend you do a factory reset and use short names.. not apple recommended names.
    Short.. 2-20 characters .. less than 10 even better.
    No spaces.
    Pure alphanumeric.
    Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
    That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

  • Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

    Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

    Hi Bob,
    I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
    Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

  • Time Capsule + Airport Express (no password for extended guest network)

    Hi guys,
    I´m using at home an Time Capsule combined with an Airport Express for extended range.
    I´ve activated the Guest Network on the Time Capsule, using an WPA2 Password for it.
    Problem is, the Airport Express is extending both the regular network and the guest network, but there´s no password set for the extended guest network.
    So basically there are 4 networks, 3 are properly secured (TC regular and guest and AE regular) but I can´t set a password for the Guest Network that´s being extended by the Airport Express.
    I have looked everywhere on the AirPort Utility with no luck whatsoever.
    I appreciate any help on this.
    Kainan-Maki.

    Time Capsule and Airport Express, Windows 7
    So you don't have a Mac or even iOS device to setup the TC and express?
    This addition of extending guest is new in later firmware.. but you need the 6.2 utility to control it.. AFAIK.

  • When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine.  Any ideas on how to get 5.0 working?

    When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine both placed.  Any ideas on how to get 5.0 working?  I thought 5.0Ghz was supposed to have a wider range.  Do I need to change a setting on the Macbook Pro?
    Thanks, W

    I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
    The upside is that the 5 GHz signal will allow faster speeds.
    The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
    In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
    If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

  • HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8.  Please help me with any suggestions on what to do.  Thank you.

    HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8.  Please help me with any suggestions on what to do.  Thank you.  I cannot find any new downloads for Safari that work with Leopard.  The newest ones only work with Lion.  My Firefox browser still works though but I would rather use Safari and cannot access any e-mails or send any e-mails via Safari.  This happened about 3 weeks ago and I thought it was just a glitch on Hotmail's site.  Now I realize Hotmail must have released an update that no longer works with Leopard 10.5.8.  PLEASE HELP ME!!!!  Thanks to anyone and everyone who reads this and attempts to help me.  I do not know what to do....

    Hi Sue,
    What exactly happens when trying Safari?
    They did change it to Outlook recently, but while not pretty, I can access mine with Safari 4.0 still...
    You can also set it up in Mail so you don't need a browser at all if you want.

  • Time Capsule Icon No Longer Appears on Desktop

    Two weeks ago I had AT&T U-verse cable, internet, & phone installed. As part of that installation they installed an AT&T router/wireless combination. The ethernet cable that was previously connected to Time Capsule is now connected to the AT&T device. There is no longer any ethernet connection to Time Capsule. The Time Capsule icon still appeared on my desktop and I manually performed back-ups from my Windows applications to Time Capsule. Time Capsule went from displaying a constant green light to displaying a flashing yellow light. That worked for several days. After about a week of that there appeared on my screen a 'wizard' of some sort recognizing the status of Time Capsule. It said this 'wizard' would eliminate the flashing yellow light. I followed the steps through the 'wizard' and at one point the flashing yellow light turned to constant green. There were a few more steps in the 'wizard' and when it was finished the flashing yellow light reappeared. The next time I tried saving files from Windows I could not connect to my w: drive, and the Time Capsule icon no longer appeared on my Mac desktop. I went into Airport Utilities and there is a box checked that should display the icon properly. Any ideas what's happening? How do I restore Time Capsule so I can back-up my files. Thank you.

    Welcome to the discussions!
    I don't have 10.6.1 yet, but have noticed this happens very occasionally on my MacBook Pro, but not on my iMac. Simply resetting Time Machine on my laptop has done the trick.
    Open System Preferences
    Click on Time Machine
    Click your Time Capsule to highlight it
    Click Use for Backups
    If that does not do it then delete the "com.apple.TimeMachine.plist" file. It's located as follows:
    Macintosh HD > Library > Preferences
    Restart your computer
    Then perform the same steps as above to setup Time Machine again.
    The resets will not affect any of your backups.

  • Using external hard drive on a Time Capsule as a network drive for PCs.

    I own a Macbook Air and am using a 2TB Time Capsule router. I am currently using for automatic backups for my Macbook Air.
    I also own 2 PC laptops for the rest of the family. Would it be possible to use an external hard drive connected to the USB port of the Time Capsule as a network drive for the PCs? I want to share files between the two PCs.
    Thanks

    Yes, you can do that.. although it is not necessarily as straight forward as you might think it should be.
    1. The TC has to be running SMB compatible names. short, no spaces, pure alphanumeric.
    2. The disk must be formatted to file system the TC can read. HFS+ or Fat32.. but the HFS+ is vastly superior.. the actual format is irrelevant from sharing point of view as it is still shared via SMB to the network.
    3. It is slow.. half the speed of the same drive plugged into your computer.. although if the connection is over wireless that is probably irrelevant.
    4. You might need a powered hub to get the drive to work.. Apple underpower the USB.. and even a powered disk still won't work.
    5. There are some issues with the TC getting the USB drive to work.. too many factors to say you will have issues or not.. but be aware this is not as straight forward as it could be. or should be.
    6. If you want to share files.. you can always share them directly.. pc to pc or pc to mac.. there is no necessity to do it via a network store.. You can also use the 2TB internal drive.. create a disk image and you can then store you data in that. Internal drive is much more reliable and faster.
    See http://pondini.org/TM/TCQ3.html

  • In time capsule, can ethernet ports used for windows pc as a LAN?

    in time capsule, can ethernet ports used for windows pc as a LAN?

    i am connecting my windows pc to the time capsule ethernet prots but those pcs are not shown in my macbook or those windows pc also can not see my macbook pro. i am facing the problem...

  • Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

    Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

    Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

  • Time capsule now does not work with Lion just installed.

    Just downloaded Lion to Mac Air. Time capsule now does not work. Where is the problem?

    Restart the TC.. lion is stupid.. it forgets what it is connected to with alarming frequency ... like someone suffering dementia.
    If it continues to have issues, plug the TC directly to the lion computer by ethernet (if not already) and try again. Change the wireless to manual in airport utility and change the wireless name.. to force a new configuration. Once setup you can just use wireless.
    In the end you may need to reset the TC.. just hold in the reset button for about 10sec. It should then become available.. a reset does not do anything to data on the hard drive but you might need to restore any passwords.

  • Mouse buttons no longer work for iTunes playback (play/pause, next, previous) after update! Help please!

    Mouse buttons no longer work for iTunes playback (play/pause, next, previous) after update! Help please!

    When you say "mouse button", do you mean clicking on the controls in the upper left of the iTunes window or do you mean that you have special media keys on your mouse?

  • Time Capsule external drive very slow for backup

    I am experiencing very, very slow backup times using an external drive attached to my Time Capsule. When I recently added a 3 TB Rocstor external drive to my mid-2011 iMac using FireWire, I included it in the drives to be backed up. The internal 2 TB of storage in my Time Capsule was no longer enough, so I plugged a 4 TB WD My Book Studio drive into the Time Capsule's USB 2.0 port and specified this WD drive as the only backup storage. The first backup took almost 48 hours. Now the Time Machine keeps trying to back up about 400 GB - 500 GB (though there haven't been any changes) and is transferring about 400 KB/sec over Ethernet from my iMac to the Time Capsule's external drive. What am I doing wrong? (I recently upgraded the iMac to OS X 10.10.2 Yosemite.)

    Frankly, I have no way to gauge your network setup, so I can't really tell you what you should expect. I can tell you from my own experiences using a local network based on a 3rd Gen. Gigabit Ethernet AEBS that using Ethernet the average throughput (not interface) was in the neighborhood of 16-20 MBs/sec. The average throughput for a USB 2.0 drive connected directly was about the same.
    This works out to an average throughput of around 60 GBs/hour. Depending upon file sizes and number of files being transferred a USB 2.0 drive might reach 100 GBs/hour, but that is a rare outcome. The USB 2.0 drive interface speed is about the same as FireWire 400 - 400 Mb/s or roughly 50 MBs/sec. This is what I know from measurement. Do not expect Ethernet to be any faster for throughput.

  • Airport Express with Time Capsule: How does it work?

    I don't know much about newtorking but wanted to ask this:
    I am considering buying a 1tb Time Capsule. I use Airport Express now so I can stream iTunes to my home entertainment system. Is the configuration supposed to be this? See below:
    -Plug the Time Capsule into the cable modem for internet access
    -Plug the APE into the Time Capsule with (ethernet? USB?) to power its Air Tunes capabilities
    I would love to gain the back up and simplicity of Time Capsule but I am not giving up Air Tunes.
    Any replies appreciated. Thanks.

    So it sounds like I should just leave Airport Express as my networking hub/internet connection point, and let Time Capsule acquire a spot on the network, then I can access it that way.
    I guess I thought that Time Capsule had to be the primary router/internet connection for the network, and Airport Express would become sub to that.
    I think I prefer the first option over my idea.
    Thanks for the response.

Maybe you are looking for

  • Error "Output module failed. The file may be damaged or corrupted (-1610153464)"

    Hi all. I using After Effect CS5.5, but i didn't render some projects. Error: And Render Best Setting AVI or Quicktime (with OpenGL or without OpenGL). I try to unstall and reinstall AE, Quicktime but it don't success. Note: Render with ffdshow is no

  • Swf won't play after uploading - white box

    I've posted a couple of previous times and gotten nothing but dead air, so I'm still trying to find a way to get flash movies to just play on a web site. Is it that hard? I hate flash. Why doesn't it just work? I'm trying to put a video gallery up an

  • Mac getting unusable after 10.9 instal

    I installed 10.9 Mavericks two weeks ago.  Now Safari, mail, system preferences, and who knows what else are not opening - the top menu bar greys out and nothing happens. now wi-fi and bluetooth are dropping out constantly. Any ideas what is going on

  • Dynamic proxy API

    where can i learn about Dynamic Proxy API,.. can anyone provide me links for the same... thank you...

  • Help with load and unload swf file.

    hello, just now i try, to  load my file using the code snippet 'load and unload' i manage to load the next file succesfully but why my recent file still appear in the background? how do i make it gone?