Help memory won't update????

I only had 8.6 gb left on my ipod, so i erased all the music and voice. I now have 6 songs and it is still saying i have 8.6 gb remaining? why isn't it updating the space?

<<It turned out that the defective memory killed the motherboard. >>
The what now?
I'd like to know more about that. 

Similar Messages

  • Help File Won't Update

    I am having a problem in getting an updated help file to show up in the program execution. The help file is <program_help/index.html>, and shows up correctly in both the Resources and Products Groups in XCode. That is, after modifying only some text in the index.html file the modified index.html correctly appears in the XCode editor. The path to the index.html file is (correctly) unchanged in the Groups & Files list. The info.plist also remains unchanged.
    After a clean/rebuild, the correct modified <program_help/index.html> is located in the Contents folder of <build/Release/program>. However, when program is launched, either within XCode or in the Finder, the Help file accessed via the Help menu has not been updated, i.e., the older unmodified version of the index.html file is displayed from within the program.
    I am obviously missing something - any suggestions will be appreciated.

    I agree that it is probably a cached file somewhere. I have not been able to find it, though. I have trashed the ~/Library/Caches/com.apple.helpui folder and any other files I've found that reference the program in ~/Library - but the wrong help file still keeps turning up.
    I've even tried to explicitly modify the com.apple.helpui/TOCCache.plist entry for the program with the pathname to the correct help file, but as soon as I call the help file in the program the TOCCache.plist file entry reverts to the the old version of the help file in an earlier version of the program.
    I doubt that any of these exercises should be necessary, though. There must be some setting in XCode that should take care of getting the correct reference for the help file. I've looked and can not find anything at this point.
    One step I will eventually take is to remove all possible sources of the old help file and then see what happens.

  • Help phone won't update

    Hello I have a Live with Walkman and I have rooted it and flashed it with a custom firmware and now I want to update to ICS they said that I have modified software and it can't b updated.
    So if there is a way to revert the changes or so.
    (btw I tried repair phone but still didn't work)

    You will have to relock your bootloader , then you'll be able to update it
    Here is how to relock
    http://forum.xda-developers.com/showthread.php?t=1134335
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • I need help: iTunes won't update my 5G 60 GB Black iPod, can someone help?

    My internet connection is working fine, I'm getting errors when trying to update my Black 5G 60 GB iPod which is formatted for Windows. I'm getting errors 1417 and I also got -50. Can anybody help me fix the problem so my iPod can play games? I really want to play games because I bought the iPod a little bit more than 3 months ago and I believe it should be able to play games because it's still new. Please Help

    It sounds like you actually have a 2G iPod Touch, which can only be updated to iOS 4.2.1 and no later.  See here to help you verify what generation your iPod Touch is.
    Identifying iPod models
    As for the iPhone 3G, it can only go as high as iOS 4.2.1 as well.
    B-rock

  • HELP itunes won't update ALL tracks

    I imported tracks onto itunes & they were skipping so i re-imported & replaced the existing files. now the tracks in itunes are perfect, except i can not get them to upload onto my ipod as no matter what preferences i select it will only ever upload newly added tracks, not the replaced tracks. DRIVING ME MAD

    Probably (and I emphasize "Probably") because your iPod sees the "replaced" tracks as already existing and, therefore, doesn't update them.

  • Help Software won't update

    Ok so I am working on iMac and the software is wayyyy out of date! It is 10.5.8. So I got the Mac OS X Snow Leopard and every time I install it it starts to work then 15 20 mins later he restarts the computer saying it will continue to work after restart. Well it never finishes the installing.
    I don't know what to do from here. 

    I suspect the 10.6.8 install is corrupt, please re-install 10.6.8.

  • My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. Help

    My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. HELP.

    Hi there owain11,
    It looks like that particular error may be realted to a hardware issue. Take a look at the article below for more information. 
    Resolve iOS update and restore errors
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    -Griff W. 

  • HT4097 My ipad and mini pad won't update though it says several apps are in need of update. Please help!

    My ipad and mini pad won't update though it says several apps are in need of updates. Please help!

    Try updating from here:
    App Store>Purchased
    Note: You'll have to look out for apps that need update.

  • HELP! Shuffle won't update songs

    I have been trying to update my shuffle song list but it won't let me. The shuffle recharges and plays ok but won't let me change the song list. I have uninstalled and restalled the IPod & Itunes but that doesn't fix it. Has any one else had this problem and fixed it?

    You're not the only one. My son's shuffle is now completely useless- NOTHING will help in anything I have found. He has no songs and no ability for itunes to put anything on it. Try explaining that there's nothing to be done about it (short of buying a CD player and just burning CDs-how 90s!) to an 11-year-old who LOVES music.
    My own shuffle won't update and itunes shuts down immediately when I click on the shuffle autofill button.
    The obvious culprit? The most recent update of iTunes. I think there's a software glitch, and I'm very upset that the people who wrote this stuff didn't check it out before the autoupdater ruined people's enjoyment of their shuffles. Everything was fine before I updated. GRRR!!!

  • Hello, my mac book air won't update. Every time i try it goes onto the purple starry screen and stays that way for hours, so i just have to shut it down. I have deleted a lot on my laptop so there is enough space, please help?

    Hello, my mac book air won't update. Every time i try it goes onto the purple starry screen and stays that way for hours, so i just have to shut it down. I have deleted a lot on my laptop so there is enough space, please help?

    I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
    I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
    I don't know if this will help you much, but it might.

  • TS3694 Hi I have just bought a 3G and i can't update to ios 4. It comes up as error -1. Have tried on various computers but it won't update. Can anyone help me please.

    Can anyone help me please. I have just bought an Iphone 3g.  slightly gutted because I was told it was a 3gs, but it's not. Tried to update it as it's currently running on ios 2 but it keeps coming up with error code -1.
    I have tried it on varous computers but it still won't update. I have been told it is possible to do it but i haven't got a clue.
    Can anyone help please?

    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.

  • HT4847 Help please. I updated the iOS version and I couldn't understand an essence of synchronization of my files. Now memory of phone is empty: there are neither photos nor contacts... Whether it is possible to return everything if the backup copy too is

    Help please. I updated the iOS version and I couldn't understand an essence of synchronization of my files. Now memory of phone is empty: there are neither photos nor contacts... Whether it is possible to return everything if the backup copy too is empty?

    Sorry to hear that, but this forum is for us, users, and what you need is someone from Xperia Care to find your motherboard and send it back, I don't think it'll be possible to retrieve any data from a broken motherboard. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • My iphone 4s won't update to ios 6! please help!

    My iphone 4s won't update to ios 6! I tried by my iphone it takes so long updating then it ends saying error!! I tried by using iTunes too, when it's done and installing it says error too!! this got me crazy!! any solution ? please help!

    I got instructions to connect my iPhone4 to iTunes. Each time I was prompted to restore the phone, I ended up getting an error message that the iPhone could not be restored. I checked that I had the latest version of iTunes-I did. I tried two more times and got the same error message. I disconnected the usb/phone, closed iTunes, and restarted the computer. This time the restore worked and iOS6 loaded. Unfortunately, the last backup to iCloud that I was told I had was in June. Don't know why this happened as it should have backed up every day. Now I am working through restoring my settings and apps from the last three months. Thankfully, I didn't 'upgrade' my iPad, so I have a template off of which to work. I hope this helps.

  • PLEASE HELP!!! Downloaded the newest Flash Drive several times and won't update on my MAC

    I downloaded the latest version of Flash Player and still it won't update on my computer although it says the installation was successful.
    Can't seem to find the reason why.
    Please help, Adobe Community....

    Hi Mike.
    I am using a Macbook OS X - 10.9.1
    Browser: Safari
    Not sure the version of the browser... (where do I look to get that info?)
    Thanks for your help, Mike!

  • Please help, LUMIA 920 won't update.

    Hello
    First let me say that I've had my NL0920 for six months and love it, but I am really frustrated that even 5 months after Amber came out my phone won't update and even fails updating when I try using other methods that have been discussed here.  Please help, this is really frustrating because I don't have any of the Amber goodness and at this rate I know I will also miss the Black update.  Even though I love my 920 I fully expected it would be updated fairly constantly as that was one of the main things that were easy to see from the press about Nokia.
    I have a Nokia Lumia 920 type RM-821, white (RM-821_lta_lta1_546)
    product code 059S1L6,
    configuration ID 153556,
    Label ID 1232.5957.9200.10211.142,
    Application Version 3.3.32
    Mobile Operator 000-PR
    Accesories Agent 2.6.2.1
    Feedback to Nokia 2.5.0.17
    Firmware Update Notifier 1.0.1.7
    Nokia Share 2.1.2.3
    Silent Installer 1.4.1.2
    SIM Unlock 1.0.0.5
    Software Version 1232.5957.1308.0002
    The phone is an unlocked Puerto Rican Country variant and is being used in Panama Central America with the Claro Operator.  According to the Global Availability page (http://www.nokia.com/global/support/software-updat​e/wp8-software-update/) the Country variant should already have the amber update available.
    When I try checking for phone updates through the Settings menu, it tells me that my phone is up to date, which is obviously not true.  
    Please help.  I love this phone but if it won't upgrade then I am going to have to start looking at something else, because I really hoped I would get the new camera improvements, and the same with the black update.
    Moderator's note: We removed the attachment and the phone's IMEI in the message. We also removed some parts of the post that mentions the use of an unauthorized software. Posting this information on the forum is not allowed. 

    Have just got this convincing answer from Nokia supprt (Australia <3 )
    Hi Ridha,
    Thank you for contacting the Nokia Careline.
    We understand that you would like to know information about the software update availability of your Nokia Lumia 920.
    Rollout timings and feature availability vary by phone model. We expect the roll out of the update will be completed by the end of September 2014.
    We ask you to be patient, as updates for Nokia Lumia range are always released gradually.
    To check the availability of the software update for your Nokia Lumia 920, Please click use the link below:
    http://www.nokia.com/global/support/software-updat​e/wp8-software-update/availability-in-latin-americ​...
    Please feel free to write back to us if you need further assistance with this case. You may also contact one of our friendly Technical Support Executives at 1-300 366 733 from 9am to 5pm, AET, Monday to Friday, closed on national public holidays. For online assistance, please visit ‘Contact us’ at our website http://www.nokia.com/au-en/support/contact/contact​us/
    Regards,
    Francis L.
    Nokia Care Representative

Maybe you are looking for

  • HT1349 Can I upgrade my iOS3.1.1 to iOS4 or iOS 5

    Can I upgrade my iOS3.1.1 to iOS4 or iOS 5?

  • Error connecting to the BPEL server from JDeveloper

    My student asks about an error she gets while trying to test a connection defined in JDeveloper to a mid-tier BPEL PM. She gets one error the first time the connection is tested, another at second and subsequent tests. The following error I get only

  • How do I go to a web site when I click on a button ?

    Hello I am going a GUI program that would go to a program or a web site when a button is clicked. What do I have to do to access a web site ? for instance:     if (e.getSource() == myJButtonBible)           // go to www.nccbuscc.org/nab/index.htm    

  • How to invoke af:commandButton programmatically

    Hello everyone, I have a page fragment with an af:commandButton that I have binded on a instance variable in a backing bean. I want to create a method that "push" the button. The button is not rendered. public class MyBackingBean { private RichComman

  • Export param UI goes wrong when exporting sequence?

    Hi, I'm making an exporter plug-in using Premiere Pro SDK 5.5. I'm adding some parameters in exSelGenerateDefaultParams. These including some tabs, groups and params in each group. But when exporting in sequence, the UI messed up, all the tab and gro