HELP !! My iPod keeps freezing i can go on it for about 10 secs then it freezes, i have to keep restarting it and it doesnt show up on itunes when i try to restart it please HELP

I can go on it for about 10 secs then it freezes,
i have to keep restarting it and it doesnt show up on
itunes when i try to restart it please HELP!! >.<
HASNT BEEN JAILBREAKED ASWELL

- Try a reset. Nothing is lost
iOS: Troubleshooting applications purchased from the App Store
- If still problem, see it iTunes nows sees the iPod so you can restore the iPod.
- Next see if placing the iPOd in recovery mode will allow a restore. For recovry mode:
iPhone and iPod touch: Unable to update or restore
- Last, try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Similar Messages

  • I had to reinstall itunes and now I get an error message when i try to open it please help

    i had to reinstall itunes and now I get an error message when i try to open it please help

    Please make sure to post the error message here, then we can help you decypher it.
    You may want to make sure you're installing the right version of itunes.  If you have a 64bit system, you will need to make sure to download and install the 64bit version of iTunes.
    http://support.apple.com/kb/DL1427

  • My ipad is on an infinite loop.  I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started.  I have tried pressing the power and home button at the same time, but it doesn't work. Please help!

    my ipad is on an infinite loop.  I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started.  I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
    I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
    I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.

    You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • HT4527 My itouch is synced to the itunes in my compaq laptop.However,I have bought a new vaio laptop.How to I transfer mt itunes from one laptop to another? Please help me!

    My itouch is synced to the itunes in my compaq laptop.However,I have bought a new vaio laptop.How to I transfer mt itunes from one laptop to another? Please help me!

    Authorization and Deauthorization
    Macs:  iTunes Store- About authorization and deauthorization.
    Windows: How to Authorize or Deauthorize iTunes | PCWorld.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
    More On De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
    As for transferring your iTunes Library: iTunes- How to move the library to an EHD. Once you have done this take the external drive to your new computer and restore the iTunes data on the new computer.

  • I have an iphone 5 and i have allready installed ios 7 and i updated ios 7 also but when i try to use airdrop even if i activate it i can't find any device and my friends iphone cannot find my iphone

    I have an iphone 5. I have allready installed ios 7 and updated to ios 7.02. When i try to use airdrop even if i activate it my phone cannot find any device also other iphones and ipads using ios 7 cannot see my iphone. İ could not find a solution for this problem.

    Hi there Akinci,
    You may find the troubleshooting steps toward the bottom of the article below helpful.
    iOS: Using AirDrop
    http://support.apple.com/kb/HT5887
    -Griff W. 

  • HT1414 my ipad 3 got truble while updating. there is showing conect to itune while i try to switch on. please let me knwo what is the solution to recover my ipad to previuos stage?

    my ipad 3 got truble while updating. there is showing conect to itune while i try to switch on. please let me knwo what is the solution to recover my ipad to previuos stage?

    That image on the iPad screen is telling you what to do. Connect the iPad to your computer and use iTunes to restore the iOS software. You said it yourself, something went wrong. So now you have to restore the device.
    The instructions for restoring the iOS are in this kb article - the article from which you posted your question.
    http://support.apple.com/kb/ht1414
    Make sure that you read all the way to the end under "Additional Information" where it talks about using recovery mode. You just might need to use that in order to restore.

  • Help! My iPod 5th gen all the sudden will not turn on. I was using it earlier today, it has a full battery and worked fine earlier. Nothing happens when I try to restart/turn off, it just remains black. I plugged it into my pc and nothing happened.

    Help! iPod Touch 5th gen.
    It worked fine earlier today, I was using it with no issues. I just picked it up to use it again and it's dead...nothing happens when I try to restart/shut off. I plugged it into my PC and nothing happens, my pc doesn't acknowledge it. Please help, I have 1500 pic of my daughter on here and they aren't backed up ..

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    You will find respective repair costs in the appropriate link:
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • My MacBook pro wont wake up from sleep. The screen is blank at all times, but I can hear the fan for 5 sec then everything stops. Please help! I don't kno what to do.

    My MacBook pro is about 3 yrs old. It is a 2008 model right before the new design came out. Recently I closed it up which puts it to sleep and a couple minutes later when I opened it up the screen stayed blank but could hear the fan running but then the power clicked like it was shutting down and I could hear nothing more. My power supply is working and I have already tried resetting it. Can anyone help me? I don't live exactly near a Mac store to get help.

    Before resorting to an LB change-out, try this, as it has fixed many of the "silver-key" Macbook Pros with wake-from-sleep issues:
    1) To get the computer running, do an SMC reset. Instructions here:
    http://support.apple.com/kb/HT3964
    Your MBP model uses the first option under the subhead, "Resetting the System Management Controller (SMC)"
    2) If you get it running, go to System Preferences > Network and select your Airport connection
    3) In the result main pane, click the "Advanced..." button.
    4) You should be looking at a window with multiple tabs at the top; the "Airport" tab (far left) should be active---if not, make it so.
    5) There is a panel showing "Prefered Networks." Use the "minus" button below that window to eliminate any networks that you don't need to access on more than a weekly basis. I'm down to two: the home Airport Extreme Base Station and the network for a museum at which I volunteer once a week.
    5) Click "OK" and close System Preferences.
    Now try letting it sleep and see it if wakes up.
    When this happened to my Late 2007 MBP, I used Console to read system.log and found that, on waking, the compuer was looking for the wireless network at a lodge where I'd stayed weeks earlier and miles away. Clear the morass of old networks and keeping the list short has completely cured my wake-from-sleep issues.
    The steps I listed take less time to do than to read, and are within the ability even of novice Mac users.
    If that doesn't work, you may need to seek professional help. If you take it to an Apple Store and they recommend a logic board replacement, ask about a "Depot Repair." Instead of replacing the logic board on-site (which will whack you to the tune of US$700-1100), they send the computer to a central Apple refurb facility that fixes whatever they find wrong for a flat fee of about US$315 (last time someone reported using the service here). Turnaround is about one working week, and people who have taken of this service have reported being very pleased with the outcome.
    You don't show a geographic location. This service may not be available if you are outside North America.

  • HELP!!! My flash video skin isn't showing up or working when i put it into dreamweaver, please help.

    When I export my flash project, and import it into dreamweaver, i go to the trailer page and the video, one, won't give me the skin to hit play, stop, pause, rewind, volume, etc. and two, when you travel to another page it continues to play the movie in the background. Can someone please help me fix these issues please!
    Link: http://ghsglobaltech.guhsd.net/students/2011_2012/web/web_36/Classwork%20Site/Assignments/ hunger-games.html
    >>Click Trailer at top of page to get to the video

    Hi avmary11,
    If your are having issues with your iPod not being recognized by iTunes (but it is being recognized by the computer), you may find the following article helpful:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Regards,
    - Brenden

  • My Iphone isnt working and its not showing the home screen after trying yesterday to download OS5, please help me

    hi
    yesterday i tryed to sownload the new software OS5 for my iPhone and after waiting the proccess to end, suddenly a message appeares saying the iphone wont restore!
    after that the iphone stop working at all and not showing the home screen to me !
    just it works by showiin the apple logo then a loading process that works for ever till the barrerry ends.
    so please help meand can i fix it here or i have to go to a maintinace shop
    thank you

    Connect the charger and let it charge for at least 30 minutes before you try to turn it on. Then let it charge  untill full. The iPhone (or iPad) need at least a little charge before you can turn it on.

  • I have windows 7 64 bit and install firefox 4 .my problem is after install firefox , icon firefox change please help me

    I have windows 7 64 bit and install firefox 4.after install firefox for one day firefox icon change please help me.
    Thank alot

    See the following  -
    Creative Cloud Help / Error downloading Creative Cloud applications
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

  • How do i change where itunes looks for music on my computer? It would only use sample music and to import thousands of songs a file at a time is ridiculous, please help!

    Had to install a new version of iTunes after an upgrade to 64Bit Windows, when i got itunes to search for content it only found the sample music, my music is stored on D drive and i cant work out how to get itunes to search there, any suggestions?
    Thanks in advance, its really annoying!

    You can use File > Add folder to library to import the media from any location. If you don't see the menu bar press ALT or CTRL+B to display it. The default options for iTunes will have created a new library folder on the C: drive, and adding media in the way described will result in iTunes making new copies of each of your media files in the C:\ drive. If that's not what you want then I suggest you hold down the shift key as you click the icon to start iTunes and keep holding until asked to choose or create a library, click the create option, and create a libray at D:\iTunes. Move your existing media content into D:\iTUnes\iTunes Media and use File > Add folder to library to import D:\iTUnes\iTunes Media. This will make a self-contained portable library that is easy to backup & move in future.
    tt2

  • I updated my iphone with software ios5.0.1 and i have lost my purchased ringtones and imported music...........please help i had 25G of music on it

    Hi everyone
    i have recently updated my iphone 3Gs with iOS 5.0.1 and i have lost my purchased ringtones and music uploaded from cd's on both my phone and computer....please help

    You have two choices, however, choice one will only work for your 3GS: Download & Install this:
    http://support.apple.com/kb/DL1575
    If you get an iPhone 5, you will need to purchase 10.6.8 & then update to iTunes 11:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • I have a wireless bluetooth keyboard and it doesnt flash the usuall green when it is turned on. I was doing playing video games and my keyboard suddenly didnt work and i checked for the green light and it was off. I tried changing batteries. Pls help.

    I was using my key board when it suddenly stopped working. I changed the batteries and still no luck. I also tryed to manually connect the keyboard back to bluetooth but that also didnt work. I thought about the time when there was a battery leak in the keyboard and that could be the problem but i question it being able to work with the battery leak. It also isnt lighting up green in a little hole on the right side coner of the keyboard. I dont have a backup keyboard and i cant log in to the computer without it. It could possibley be that the keyboard completely doesnt work and i dont know if it does. Please Help.

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My ipod touch screen is cracked from the bottom left corner to the middle button, my button has recently stopped working and i was wondering if this has caused or has another problem occurred, please help me?!ha

    any help or suggestions? someone technical??

    Doesn't matter if the crack is causing the button to stop working not, that won't be covered under warranty.

Maybe you are looking for

  • How can I display a new scene in JavaFX 2.2? For example after button click

    how to display new scene after button click in the main window, I want the main window and the new scene are in one stage. thx

  • Skype number inactive

    I recently purchased a Kindle Fire HD 7" and installed Skype on it.  I paid for the subscription and Skype credits.  My bank shows both of those transactions, but when I open Skype it shows the credits, but says my Skype number is not active.  When I

  • Data Transfer Workbench can copy sales & purchase modules's data?

    Hi, Just wondering that,any way to copy the Sales & Purchase Modules's data from existing company to new company? Copy Express can't do it. But how about Data Transfer Workbench can copy? Thanks Regards, Danny Edited by: Danny Gan on Mar 18, 2008 5:2

  • Connection object is null returned

    Hi, I have created a datasource in Server Navigator for MySql database. Also in Admin Console I have given a JNDI name to this datasource. I am using this JNDI name. Application is able to lookup for this JNDI name but unable to get connection object

  • WYSE terminal over DSL IPSEC IOS VPN

    I am having a problem establishing a connection over my WAN via a WYSE terminal to a Citrix server. We have PC's that can connect using the ICA client without any problems but the Wyse terminals fail and don't even display an image on the screen. I h