Help Need Help for Creative M

my Creative Muvo and Creative Muvofm will not read in my coputer.
when i it put in the a USB port nothing will pop up.
then when i go to My Computer it will not be there.
then when i am at the My Coputer i right click and go to Hardware and then Device manger i see that it want to read it becasue it will be there and then it says that i need to reinstall the hardware. so when i do it does not work. then it is the same thing all over agian.
so can someone help me. i need it. this problem happens for both mp3 players.

Try this. Install the driver on the pc. Right click on my computer and clock on manage. Go to windows services and make sure that Windows Image Acquisition (WIA) is set to automatic. Reboot the pc. Now try connecting the mp3 player before starting any software. See if it is now recognized. Which models of Muvo do you have?

Similar Messages

  • Need help need help exporting epub to iTunes Producer

    Need help need help exporting epub to iTunes Producer. Nothing will load only get that little spinning wheel.

    It's not necessary to post a second time. I'm locking this version so others may reply at the first thread you created:
    Hi I created a EPUB with indesign cc and I'm trying to submitted it to iTunes Producer

  • I need Drivers for Creative-Labs PCI128 PCI CT-4750 to windows 7 help!

    hi, people, I need Drivers for? Creative-Labs PCI28 PCI CT-4750 to windows 7, I installs a few drivers but in the SO dont work very well, because this card have 2 out of audio and only sound out (green out), I think the problen is the drivres, I cant found, need help, im from venezuela, mi english its not good T_T
    here the imagen: <img border="0" height="338" width="450" src="http://images.enet.com.cn/iflow/articleimage/200404/080872909934.jpg">
    in the control panel > sound > only appears the opcion "mono and stereo"

    Unless you can get the last XP driver from 2002 to install in compatibility mode, you can pretty much forget about it. That card is just way to old to get any kind of driver for Windows 7.

  • Help need driver for Mac Yosemite 10.10.2 for LaserJet Pro Color...

      Please help me find the driver for the HP LaserJET COLOR PRO 200 FOR MAC OXC 10.10 YOSEMITE
    This question was solved.
    View Solution.

    This should be what you need
    Driver for for OS X 10.9 Mavericks and OS X 10.10 Yosemite
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-125410-4&cc=us&dlc=en&lc=en...
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Need Help Need Help PLZ PLZ

    my problem is that i have made a calendar by using jtable and i can't highlight or put any sign to keep track on date, but the biggest problem is that i have to submit this project after two days, so i will appreciate any help or tips from you. Here is my code:
    CODE
    /*Contents of CalendarProgran.class */
    //Import packages
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.table.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.util.*;
    public class CalendarProgram{
    static JLabel lblMonth, lblYear;
    static JButton btnPrev, btnNext;
    static JTable tblCalendar;
    static JComboBox cmbYear;
    static JFrame frmMain;
    static Container pane;
    static DefaultTableModel mtblCalendar; //Table model
    static JScrollPane stblCalendar; //The scrollpane
    static JPanel pnlCalendar;
    static int realYear, realMonth, currentYear, currentMonth;
    public static void main (String args[]){
    //Look and feel
    try {UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());}
    catch (ClassNotFoundException e) {}
    catch (InstantiationException e) {}
    catch (IllegalAccessException e) {}
    catch (UnsupportedLookAndFeelException e) {}
    //Prepare frame
    frmMain = new JFrame ("Gestionnaire de clients"); //Create frame
    frmMain.setSize(330, 375); //Set size to 400x400 pixels
    pane = frmMain.getContentPane(); //Get content pane
    pane.setLayout(null); //Apply null layout
    frmMain.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); //Close when X is clicked
    //Create controls
    lblMonth = new JLabel ("January");
    lblYear = new JLabel ("Change year:");
    cmbYear = new JComboBox();
    btnPrev = new JButton ("<<");
    btnNext = new JButton (">>");
    mtblCalendar = new DefaultTableModel(){public boolean isCellEditable(int rowIndex, int mColIndex){return false;}};
    tblCalendar = new JTable(mtblCalendar);
    stblCalendar = new JScrollPane(tblCalendar);
    pnlCalendar = new JPanel(null);
    //Set border
    pnlCalendar.setBorder(BorderFactory.createTitledBorder("Calendar"));
    //Register action listeners
    btnPrev.addActionListener(new btnPrev_Action());
    btnNext.addActionListener(new btnNext_Action());
    cmbYear.addActionListener(new cmbYear_Action());
    //Add controls to pane
    pane.add(pnlCalendar);
    pnlCalendar.add(lblMonth);
    pnlCalendar.add(lblYear);
    pnlCalendar.add(cmbYear);
    pnlCalendar.add(btnPrev);
    pnlCalendar.add(btnNext);
    pnlCalendar.add(stblCalendar);
    //Set bounds
    pnlCalendar.setBounds(0, 0, 320, 335);
    lblMonth.setBounds(160-lblMonth.getPreferredSize().width/2, 25, 100, 25);
    lblYear.setBounds(10, 305, 80, 20);
    cmbYear.setBounds(230, 305, 80, 20);
    btnPrev.setBounds(10, 25, 50, 25);
    btnNext.setBounds(260, 25, 50, 25);
    stblCalendar.setBounds(10, 50, 300, 250);
    //Make frame visible
    frmMain.setResizable(false);
    frmMain.setVisible(true);
    //Get real month/year
    GregorianCalendar cal = new GregorianCalendar(); //Create calendar
    realMonth = cal.get(GregorianCalendar.MONTH); //Get month
    realYear = cal.get(GregorianCalendar.YEAR); //Get year
    currentMonth = realMonth; //Match month and year
    currentYear = realYear;
    //Add headers
    String[] headers = {"Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"}; //All headers
    for (int i=0; i<7; i++){
    mtblCalendar.addColumn(headers);
    tblCalendar.getParent().setBackground(tblCalendar.getBackground()); //Set background
    //No resize/reorder
    tblCalendar.getTableHeader().setResizingAllowed(false);
    tblCalendar.getTableHeader().setReorderingAllowed(false);
    //Single cell selection
    tblCalendar.setColumnSelectionAllowed(true);
    tblCalendar.setRowSelectionAllowed(true);
    tblCalendar.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    //Set row/column count
    tblCalendar.setRowHeight(38);
    mtblCalendar.setColumnCount(7);
    mtblCalendar.setRowCount(6);
    //Populate table
    for (int i=realYear-100; i<=realYear+100; i++){
    cmbYear.addItem(String.valueOf(i));
    //Refresh calendar
    refreshCalendar (realMonth, realYear); //Refresh calendar
    public static void refreshCalendar(int month, int year){
    //Variables
    String[] months = {"January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"};
    int nod, som; //Number Of Days, Start Of Month
    //Allow/disallow buttons
    btnPrev.setEnabled(true);
    btnNext.setEnabled(true);
    if (month == 0 && year <= realYear-10){btnPrev.setEnabled(false);} //Too early
    if (month == 11 && year >= realYear+100){btnNext.setEnabled(false);} //Too late
    lblMonth.setText(months[month]); //Refresh the month label (at the top)
    lblMonth.setBounds(160-lblMonth.getPreferredSize().width/2, 25, 180, 25); //Re-align label with calendar
    cmbYear.setSelectedItem(String.valueOf(year)); //Select the correct year in the combo box
    //Clear table
    for (int i=0; i<6; i++){
    for (int j=0; j<7; j++){
    mtblCalendar.setValueAt(null, i, j);
    //Get first day of month and number of days
    GregorianCalendar cal = new GregorianCalendar(year, month, 1);
    nod = cal.getActualMaximum(GregorianCalendar.DAY_OF_MONTH);
    som = cal.get(GregorianCalendar.DAY_OF_WEEK);
    //Draw calendar
    for (int i=1; i<=nod; i++){
    int row = new Integer((i+som-2)/7);
    int column = (i+som-2)%7;
    mtblCalendar.setValueAt(i, row, column);
    //Apply renderers
    tblCalendar.setDefaultRenderer(tblCalendar.getColumnClass(0), new tblCalendarRenderer());
    static class tblCalendarRenderer extends DefaultTableCellRenderer{
    public Component getTableCellRendererComponent (JTable table, Object value, boolean selected, boolean focused, int row, int column){
    if (column == 0 || column == 6){
    setBackground(new Color(255, 220, 220));
    else{
    setBackground(new Color(255, 255, 255));
    super.getTableCellRendererComponent(table, value, selected, focused, row, column);
    return this;
    static class btnPrev_Action implements ActionListener{
    public void actionPerformed (ActionEvent e){
    if (currentMonth == 0){ //Back one year
    currentMonth = 11;
    currentYear -= 1;
    else{ //Back one month
    currentMonth -= 1;
    refreshCalendar(currentMonth, currentYear);
    static class btnNext_Action implements ActionListener{
    public void actionPerformed (ActionEvent e){
    if (currentMonth == 11){ //Foward one year
    currentMonth = 0;
    currentYear += 1;
    else{ //Foward one month
    currentMonth += 1;
    refreshCalendar(currentMonth, currentYear);
    static class cmbYear_Action implements ActionListener{
    public void actionPerformed (ActionEvent e){
    if (cmbYear.getSelectedItem() != null){
    String b = cmbYear.getSelectedItem().toString();
    currentYear = Integer.parseInt(b);
    refreshCalendar(currentMonth, currentYear);

    Welcome to the forum. You will need to learn a couple things if you want to receive help and not get flamed to death:
    1) All code needs to be posted within code tags. You can read up on them here:
    http://forum.java.sun.com/help.jspa?sec=formatting
    You want to make it as easy as possible for the volunteers here to help you. That means making your code readable.
    2) Do not put "urgent" "need help" "hurry please" in your posts if you are smart. Definitely don't put them in the header of the post. The urgency is yours, not ours. Putting that stuff in there only turns people off. If you have a problem deemed worthwhile by the volunteers here, if you have put thought into your post so you make it easy as possible for others to help you, and if you show some effort on your own, you are almost guaranteed to get timely help.
    3) List all error messages completely.
    4) Keep all necessary code, get rid of all unnecessary code. Your code should be compilable on its own, but it should not contain anything that isn't necessary for demonstrating your problem.
    5) Specifics:
    Why are you throwing out all those exceptions?
    Why is everything in one big huge GUI class? Break your code down into functional units. Make sure the logic works in a non-GUI way, THEN add a GUI class.
    Why the huge main method? The main should be short and sweet.
    Why the static inner classes? Do you know what is the difference between static inner classes and non-static inner classes?
    Why all the static variables anyway? You are doing procedural programming with an OOP language. You should use OOP if you can with an OOP language.
    Sorry, but this code looks like it was thrown together in a big hurry. I think that you have a lot of work to do. Good luck!

  • Menu Button not working at all..Please help needed urgently for deadline.

    I have used all the suggestions I can find in the forum. Nothing is working.
    I am trying to draw button rectangle on a still background for a menu. Draging the pointer doesn't do anything. I have tried to import a tutorial with menu and buttons within it. When loading the project assets the import stops at "Loading menu" and does not proceed.
    I am using suitcase fusion for a font manager.I have reinstalled the DSP a few times without any success.
    I have spent three nights trying to solvge the problem and I am running out of time for the project delivery help is need urgently

    Your key is the "suitcase fusion for a font manager" line.
    There is a bug where you won't be able to create a button if you have a bad font, or a duplicate font, installed.
    First try shutting off all of the fonts you have open with Suitcase, and see if that helps. If so, open one suitcase at a time until you figure out which font is the culprit.
    If shutting off all but the basic System fonts does not help, you might have to reinstall your system, or somehow update your core System fonts. I don't know how to do that, but there was a recent article at http://www.tidbits.com/ that discussed fonts and their maintenance. But ultimately it's a font problem.

  • Help - Need download for 6.0.4 for Windows XP

    My 6.0.5 upgrade is not working properly and I need to go back to 6.0.4. My 30G video iPod lost over 1000 songs and many of the ones left stop playing prematurely. Everything was working fine until I upgraded. Where can I find the upgrade. Apple does have a site for the 6.0.4, but when you click to download, it automatically sends you to 6.0.5. Anyone else having this problem?? Thanks for any help. I just want to listen to my songs, podcasts, video, etc! I even sent my iPod in to Apple repair, and they returned it with a note saying that nothing was wrong with it. I guess they didn't try to listen to any music on it.
    Toshiba A105   Windows XP   Windows XP MCE

    You'll find older versions of iTunes here: Old iTunes for Windows

  • Help needed - ABAP for  function modules and routines.

    Dear BW gurus,
    Hope everyone is doing great.
    I gotta project recently and we are going live in 3 weeks.My BWLead is getting rolled out in a week and he has to make the knowledge transfer to me ASAP.The bottle-necking thing is I need to have a good idea about the function modules and routines.So I request our SND community to help me out with good ABAP documents for function modules,routines and query.
    my mail id is [email protected]
    Thanks in advance
    Have a nice day
    Regards
    sathiya

    Hello Sam,
    You can create function module in ABAP using tcode SE37.
    For more informations on ABAP:
    http://help.sap.com/saphelp_47x200/helpdata/en/c9/5472f6787f11d194c90000e8353423/frameset.htm
    Use http://help.sap.com
    and also use <b>ABAPDOCU</b> transaction.
    Check these links also...
    <b>Online PDFs:</b>
    http://easymarketplace.de/online-pdfs.php
    <b>ABAP HELP</b>
    If you check these links, you can find many example programs.
    http://www.sap-img.com/abap.htm
    http://www.sapdevelopment.co.uk/tips/tipshome.htm
    http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
    http://sap.ittoolbox.com/nav/t.asp?t=322&p=322&h1=322
    http://sappoint.com/abap/
    FAQs in ABAP
    http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
    Smart forms
    http://www.sap-basis-abap.com/sapsf001.htm
    Workflow
    <http://www.sap-img.com/workflow/sap-workflow.htm>
    ALV
    http://www.geocities.com/mpioud/Abap_programs.html
    Mail
    http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
    http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
    Table control in BDC
    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
    SAP Scripts:
    http://sappoint.com/abap/
    http://www.henrikfrank.dk/abapuk.html
    Some useful ABAP Links for learning:
    http://cma.zdnet.com/book/abap/index.htm
    http://www.sapdevelopment.co.uk/
    http://www.sap-img.com/
    http://juliet.stfx.ca/people/fac/infosys/abap.htm
    http://help.sap.com/saphelp_46c/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/d6/0db357494511d182b70000e829fbfe/frameset.htm
    http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
    http://www.sapgenie.com/abap/example_code.htm
    http://www.geocities.com/SiliconValley/Campus/6345/abapindx.htm
    http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
    http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
    http://www.sap-img.com/abap-function.htm
    http://www.sapgenie.com/abap/code/abap19.htm
    http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
    http://www.planetsap.com/Tips_and_Tricks.htm
    http://help.sap.com/saphelp_40b/helpdata/ru/d6/0dc169494511d182b70000e829fbfe/applet.htm
    http://www.henrikfrank.dk/abapexamples/SapScript/symbols.htm
    http://www.henrikfrank.dk/abapexamples/index.html
    http://sap.ittoolbox.com/documents/document.asp?i=752
    http://members.aol.com/_ht_a/skarkada/sap/
    http://sappoint.com/abap/
    http://members.tripod.com/abap4/SAP_Functions.html
    http://members.ozemail.com.au/~anmari/sap/index.html
    http://www.planetsap.com/Userexit_List.htm
    http://www.planetsap.com/Tips_and_Tricks.htm
    http://www.kabai.com/abaps/q.htm
    http://www.planetsap.com/Userexit_List.htm
    http://help.sap.com/saphelp_bw21c/helpdata/en/c4/3a8090505211d189550000e829fbbd/frameset.htm
    http://www.sapgenie.com/abap/bapi/example.htm
    http://help.sap.com/saphelp_45b/helpdata/en/65/897415dc4ad111950d0060b03c6b76/content.htm
    http://www.sap-basis-abap.com/index.htm
    http://help.sap.com/saphelp_40b/helpdata/en/fc/eb2c46358411d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/aa/aeb23789e95378e10000009b38f8cf/frameset.htm
    http://www.geocities.com/ResearchTriangle/1635/system.html
    http://www.sapdesignguild.org/resources/MiniSG/3_Managing/3_Functions_Table_Control.htm
    http://help.sap.com/saphelp_45b/helpdata/en/d1/801bdf454211d189710000e8322d00/content.htm
    http://www.sapfans.com/sapfans/repos/saprep.htm
    http://www.planetsap.com/howdo_a.htm
    http://help.sap.com/saphelp_util464/helpdata/en/69/c2516e4ba111d189750000e8322d00/content.htm
    http://www.sapgenie.com/abap/smartforms_detail.htm
    http://www.sap-img.com/abap.htm
    http://help.sap.com/saphelp_46c/helpdata/en/fc/eb2d67358411d1829f0000e829fbfe/content.htm
    http://www.geocities.com/victorav15/sapr3/abap.html
    http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
    http://abap4.tripod.com/Other_Useful_Tips.html
    http://help.sap.com/saphelp_45b/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
    http://www.sap-basis-abap.com/sapmm.htm
    http://sap.ittoolbox.com/nav/t.asp?t=303&p=448&h1=303&h2=322&h3=448
    http://sapfans.com/
    http://cma.zdnet.com/book/abap/ch03/ch03.htm
    http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
    http://sappoint.com/abap/
    http://www.henrikfrank.dk/abapuk.html
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
    http://www.sapgenie.com/abap/index.htm
    http://www.sap-img.com/abap.htm
    http://www.sapdevelopment.co.uk/tips/tipshome.htm
    http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
    http://sap.ittoolbox.com/nav/t.asp?t=322&p=322&h1=322
    http://sap.ittoolbox.com/nav/t.asp?t=448&p=448&h1=448
    http://www.thespot4sap.com/
    http://www.kabai.com/abaps/q.htm
    http://www.geocities.com/mpioud/Abap_programs.html
    http://www.sapgenie.com/abap/tips_and_tricks.htm
    http://www.sapassist.com/code/d.asp?whichpage=1&pagesize=10&i=10&a=c&o=&t=&q=&qt=
    For FAQ
    http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
    http://www.sapgenie.com/faq/abap.htm
    BAPI-step by step
    http://www.sapgenie.com/abap/bapi/example.htm
    http://www.sapgenie.com/abap/bapi/example.htm
    Web log for receive email and processing it through ABAP
    /people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
    For Logical database
    http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
    Useful link to websites
    http://www.hernangn.com.ar/sap.htm
    Useful for background
    http://www.sappoint.com/basis/bckprsng.pdf
    http://help.sap.com/saphelp_nw04/helpdata/en/6f/08703713bf277ee10000009b38f8cf/frameset.htm
    http://publib.boulder.ibm.com/infocenter/wbihelp/index.jsp?topic=/com.ibm.wbix_adapters.doc/doc/mysap4/sap4x41.htm
    Table control in BDC
    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
    For posting web log,
    /people/sap.user72/blog/2005/06/28/sdn-weblogs-making-it-easier
    Dynamic Internal table -web log in sdn
    /people/subramanian.venkateswaran2/blog/2004/11/19/dynamic-internal-table
    ALV
    http://www.geocities.com/mpioud/Abap_programs.html
    Mail
    http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
    http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
    http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
    BOM Explosion
    /people/prakash.singh4/blog/2005/05/15/explode-boms-in-enterprise-portal-using-htmlb-tree--part-1-abap
    BOM
    http://help.sap.com/saphelp_erp2005/helpdata/en/ea/e9b7234c7211d189520000e829fbbd/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
    http://www.sap-img.com/sap-sd/sales-bom-implementation.htm
    http://www.sap-basis-abap.com/sappp007.htm
    OLE
    http://www.sapgenie.com/abap/ole.htm
    http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
    ALVGRID with refresh
    http://www.geocities.com/mpioud/Z_DEMO_ALV_REFRESH_BUTTON.html
    For language setting and decimal separator
    /people/horst.keller/blog/2004/11/16/abap-geek-7-150-babylonian-confusion
    Oracle queries
    http://sqlzoo.net/
    To format SQL
    http://www.sqlinform.com/
    SCOT settings
    http://www.sap-img.com/basis/basis-faq.htm
    Status Icon [ALV,Table Control,Tab Strip]
    http://www.sapdesignguild.org/resources/MiniSG-old/from_develop/norm_status_icons.htm#positioning_4
    ALV Group Heading
    http://www.sap-img.com/fu037.htm
    For multiMedia
    /people/thomas.jung3/blog/2005/05/11/using-classic-activex-controls-in-the-abap-control-framework
    Uploading LOGO in SAP
    http://www.sap-img.com/ts001.htm
    LSMW
    http://www.sap-img.com/sap-data-migration.htm
    http://www.sapgenie.com/saptech/lsmw.htm
    http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
    http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
    http://www.consolut.de/saphelp/sap_online_help.html
    http://www.sap-img.com/
    http://www.sappoint.com/
    http://www.sapdevelopment.co.uk/
    http://www.allsaplinks.com/idoc_search.html
    Best Regards,
    Thangesh

  • Help needed please for master socket wiring

    I am renovating a house built in the 1970's which I shall be moving into shortly.
    My electrician has put in telephone sockets in two of the bedrooms but when he came to the master socket he found the builders had by mistake cut the wire too short so he could not make a connection.
    The master socket is in the hall low down on the wall and it looks as if the wire comes into the house underground.
    I have spent hours on the telephone trying to get the right person to speak to at BT who tells me I need to contact Open Reach as it is damage and when I eventually found a number to ring them they tell me it is BT's problem.
    In exasperation I telephoned the moving house line as none of the press button numbers seemed relevant.
    I just want a BT person to come and have a look to see what to do but they have told me that I need to give them a date for when I move and they will come and look then.  However, I need the builders to fill in the large hole in where the wire comes into the house so I can have a floor laid.
    Any help would be so much appreciated

    Hi Kh,
    Thank you for your post and welcome to the forum. If you would like a BT Engineer to go out and take a look at your line this can bee arranged when you place an order to activate the service. With the line being damaged by the builder, there will be a charge of around £127.99 to activate the service.
    If you need any help placing your order to activate the service, please drop me an email with any BT account details, along with the address details for you new property. My email address is [email protected]
    Thanks
    Paddy
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Help needed urgently! creative zen touch 40gb forgets that songs ex

    I have had my player for 6 months with no problem but yesterday it forgot 2000 songs existed. It still displayed the artist name but everytime i clicked on them it came up with "add music from libary press menu button" However on the other artists (keep in mind i have 7000 songs) it is fine. But It has forgot around 2000 songs.
    Then i thought i would try to upload the songs again. This is when i discovered once my player is docked it only displays 2 songs by each artist which is rubbish because in some cases i have 80 songs by a certain artist. So i have no idea why it displays 2 songs.
    I then noticed a unknown folder which has files in it such as ??23323d?. These "tracks" have blue logos next to them on the left hand side. I have no idea what they are but it will not let me delete them. It also will not let me add any more tracks and everytime i unplug the usb it crashes. It also takes about a minute to turn on now instead of the couple of seconds it took before. And pauses and crashes accure quite often now.
    It's probably a long shot but is there anything i can do? All help either big or small will be appreacited. And if you need more detail just ask me.
    Thanks mike x

    Mike,
    Probably you can try running Cleanup option from the player Rescue mode.
    Jason

  • Please Help - Need Help with Buttons for GUI for assignment. URGENT!!

    Can someone please help me with the buttons on this program? I cannot figure out how to get them to work.
    Thanks!!!
    import java.awt.*;
    import java.awt.event.*;
    import java.text.NumberFormat;
    import javax.swing.*;
    import javax.swing.JButton;
    public class InventoryTAH implements ActionListener
        Maker[] proMaker;
        JTextField[] fields;
        NumberFormat nf;
        public void actionPerformed(ActionEvent e)
            int index = ((JComboBox)e.getSource()).getSelectedIndex();
            populateFields(index);
        public static void main(String[] args)
            try
                UIManager.setLookAndFeel(
                        "com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
            catch (Exception e)
                System.err.println(e.getClass().getName() + ": " + e.getMessage());
            InventoryTAH test = new InventoryTAH();
            test.initMakers();
            test.showGUI();
            test.populateFields(0);
        private void initMakers() {
            proMaker = new Maker[10];
            proMaker[0] = new Maker( 1, "Pens",1.59,100,"Bic");
            proMaker[1] = new Maker( 2, "Pencils", .65, 100,"Mead");
            proMaker[2] = new Maker( 3, "Markers", 1.29, 100,"Sharpie");
            proMaker[3] = new Maker( 4, "Paperclips", 1.19, 100,"Staples");
            proMaker[4] = new Maker( 5, "Glue", .85, 100,"Elmer's");
            proMaker[5] = new Maker( 6, "Tape", .50, 100,"3m");
            proMaker[6] = new Maker( 7, "Paper", 1.85, 100,"Mead");
            proMaker[7] = new Maker( 8, "Stapler", 2.21, 100,"Swingline");
            proMaker[8] = new Maker( 9, "Folders", .50, 100,"Mead");
            proMaker[9] = new Maker( 10, "Rulers", .27, 100,"Stanley");      
          int maxNum = 10;
          int currentNum = 0;
          int currentInv = 0;
             Action firstAction = new AbstractAction("First")
              public void actionPerformed(ActionEvent evt)
                   currentInv = 0;
                   int populateFields;
          JButton firstButton = new JButton(firstAction);
          Action previousAction = new AbstractAction("Previous")
              public void actionPerformed(ActionEvent evt)
                   currentInv--;
                   if (currentInv < 0)
                        currentInv = maxNum - 1;
                   int populateFields;
          JButton previousButton = new JButton(previousAction);
          Action nextAction  = new AbstractAction("Next")
              public void actionPerformed(ActionEvent evt)
                   currentInv++;
                   if (currentInv >= currentNum)
                        currentInv = 0;
                  int populateFields;
          JButton nextButton = new JButton(nextAction);
          Action lastAction = new AbstractAction("Last")
              public void actionPerformed(ActionEvent evt)
                   currentInv = currentNum - 1;
                   int populateFields;
          JButton lastButton = new JButton(lastAction);
              JPanel buttonPanel = new JPanel( );
        private void showGUI() {
            JLabel l;
            JButton button1;
                JButton button2;
            fields = new JTextField[8];
            JFrame f = new JFrame("Inventory");
            Container cp = f.getContentPane();
            cp.setLayout(new GridBagLayout());
            cp.setBackground(UIManager.getColor(Color.BLACK));
            GridBagConstraints c = new GridBagConstraints();
            c.gridx = 0;
            c.gridy = GridBagConstraints.RELATIVE;
            c.gridwidth = 1;
            c.gridheight = 1;
            c.insets = new Insets(2, 2, 2, 2);
            c.anchor = GridBagConstraints.EAST;
            cp.add(l = new JLabel("Item Number:", SwingConstants.CENTER), c);
            l.setDisplayedMnemonic('a');
            cp.add(l = new JLabel("Item Name:", SwingConstants.CENTER), c);
            l.setDisplayedMnemonic('b');
            cp.add(l = new JLabel("Number of Units in Stock:", SwingConstants.CENTER), c);
            l.setDisplayedMnemonic('c');
            cp.add(l = new JLabel("Price per Unit: $", SwingConstants.CENTER), c);
            l.setDisplayedMnemonic('d');
            cp.add(l = new JLabel("Total cost of Item: $", SwingConstants.CENTER), c);
            l.setDisplayedMnemonic('e');
            cp.add(l = new JLabel("Total Value of Merchandise in Inventory: $", SwingConstants.CENTER), c);
            l.setDisplayedMnemonic('f');
            cp.add(l = new JLabel("Manufacturer:", SwingConstants.CENTER), c);
            l.setDisplayedMnemonic('g');
            cp.add(l = new JLabel("Restocking Fee: $", SwingConstants.CENTER), c);
            l.setDisplayedMnemonic('h');
                c.gridx = 1;
            c.gridy = 0;
            c.weightx = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.anchor = GridBagConstraints.CENTER;
            cp.add(fields[0] = new JTextField(), c);
            fields[0].setFocusAccelerator('a');
            c.gridx = 1;
            c.gridy = GridBagConstraints.RELATIVE;
            cp.add(fields[1] = new JTextField(), c);
            fields[1].setFocusAccelerator('b');
            cp.add(fields[2] = new JTextField(), c);
            fields[2].setFocusAccelerator('c');
            cp.add(fields[3] = new JTextField(), c);
            fields[3].setFocusAccelerator('d');
            cp.add(fields[4] = new JTextField(), c);
            fields[4].setFocusAccelerator('e');
            cp.add(fields[5] = new JTextField(), c);
            fields[5].setFocusAccelerator('f');
            cp.add(fields[6] = new JTextField(), c);
            fields[6].setFocusAccelerator('g');
            cp.add(fields[7] = new JTextField(), c);
            fields[7].setFocusAccelerator('h');
            c.weightx = 0.0;
            c.fill = GridBagConstraints.NONE;
              cp.add(firstButton);
              cp.add(previousButton);
              cp.add(nextButton);
              cp.add(lastButton);
                          JComboBox combo = new JComboBox();
            for(int j = 0; j < proMaker.length; j++)
                combo.addItem(proMaker[j].getName());
            combo.addActionListener(this);
                cp.add(combo);
                cp.add(button1 = new JButton("   "), c);
            f.pack();
            f.addWindowListener(new WindowAdapter()
                public void windowClosing(WindowEvent evt)
                    System.exit(0);
            f.setVisible(true);
      private void populateFields(int index) {
            Maker maker = proMaker[index];
            fields[0].setText(Long.toString(maker.getNumberCode()));
            fields[1].setText(maker.getName());
            fields[2].setText(Long.toString(maker.getUnits()));
            fields[3].setText(Double.toString(maker.getPrice()));
            fields[4].setText(Double.toString(maker.getSum()));
            fields[5].setText(Double.toString(maker.totalAllInventory(proMaker)));
            fields[6].setText(maker.getManufact());
            fields[7].setText(Double.toString(maker.getSum()*.05));       
    class Maker {
        int itemNumber;
        String name;
        int units;
        double price;
        String manufacturer;
        public Maker(int n, String name, double price, int units, String manufac) {
            itemNumber = n;
            this.name = name;
            this.price = price;
            this.units = units;
            manufacturer = manufac;
        public int getNumberCode() { return itemNumber; }
        public String getName() { return name; }
        public int getUnits() { return units; }
        public double getPrice() { return price; }
        public double getSum() { return units*price; }
        public String getManufact() { return manufacturer; }
        public double totalAllInventory(Maker[] makers) {
            double total = 0;
            for(int j = 0; j < makers.length; j++)
                total += makers[j].getSum();
            return total;
    }}

    // I have made some modifications. Please try this.
    import java.awt.*;
    import java.awt.event.*;
    import java.text.NumberFormat;
    import javax.swing.*;
    import javax.swing.JButton;
    public class InventoryTAH implements ActionListener
    Maker[] proMaker;
    JTextField[] fields;
    NumberFormat nf;
    int currentInv = 0;
    public void actionPerformed(ActionEvent e)
    currentInv= ((JComboBox)e.getSource()).getSelectedIndex();
    populateFields(currentInv);
    public static void main(String[] args)
    try
    UIManager.setLookAndFeel(
    "com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
    catch (Exception e)
    System.err.println(e.getClass().getName() + ": " + e.getMessage());
    InventoryTAH test = new InventoryTAH();
    test.initMakers();
    test.showGUI();
    test.populateFields(0);
    private void initMakers() {
    proMaker = new Maker[10];
    proMaker[0] = new Maker( 1, "Pens",1.59,100,"Bic");
    proMaker[1] = new Maker( 2, "Pencils", .65, 100,"Mead");
    proMaker[2] = new Maker( 3, "Markers", 1.29, 100,"Sharpie");
    proMaker[3] = new Maker( 4, "Paperclips", 1.19, 100,"Staples");
    proMaker[4] = new Maker( 5, "Glue", .85, 100,"Elmer's");
    proMaker[5] = new Maker( 6, "Tape", .50, 100,"3m");
    proMaker[6] = new Maker( 7, "Paper", 1.85, 100,"Mead");
    proMaker[7] = new Maker( 8, "Stapler", 2.21, 100,"Swingline");
    proMaker[8] = new Maker( 9, "Folders", .50, 100,"Mead");
    proMaker[9] = new Maker( 10, "Rulers", .27, 100,"Stanley");
         int maxNum = 10;
         int currentNum = 0;
    Action firstAction = new AbstractAction("First")
              public void actionPerformed(ActionEvent evt)
                   currentInv = 0;
                   populateFields(currentInv);
         JButton firstButton = new JButton(firstAction);
         Action previousAction = new AbstractAction("Previous")
              public void actionPerformed(ActionEvent evt)
                   currentInv--;
                   if (currentInv < 0)
                        currentInv = maxNum - 1;
                   populateFields(currentInv);
         JButton previousButton = new JButton(previousAction);
         Action nextAction = new AbstractAction("Next")
              public void actionPerformed(ActionEvent evt)
                   currentInv++;
                   if (currentInv >= maxNum)
                        currentInv = 0;
              populateFields(currentInv);
         JButton nextButton = new JButton(nextAction);
         Action lastAction = new AbstractAction("Last")
              public void actionPerformed(ActionEvent evt)
                   currentInv = maxNum-1;
                   populateFields(currentInv);
         JButton lastButton = new JButton(lastAction);
              JPanel buttonPanel = new JPanel( );
    private void showGUI() {
    JLabel l;
    JButton button1;
              JButton button2;
    fields = new JTextField[8];
    JFrame f = new JFrame("Inventory");
    Container cp = f.getContentPane();
    cp.setLayout(new GridBagLayout());
    cp.setBackground(UIManager.getColor(Color.BLACK));
    GridBagConstraints c = new GridBagConstraints();
    c.gridx = 0;
    c.gridy = GridBagConstraints.RELATIVE;
    c.gridwidth = 1;
    c.gridheight = 1;
    c.insets = new Insets(2, 2, 2, 2);
    c.anchor = GridBagConstraints.EAST;
    cp.add(l = new JLabel("Item Number:", SwingConstants.CENTER), c);
    l.setDisplayedMnemonic('a');
    cp.add(l = new JLabel("Item Name:", SwingConstants.CENTER), c);
    l.setDisplayedMnemonic('b');
    cp.add(l = new JLabel("Number of Units in Stock:", SwingConstants.CENTER), c);
    l.setDisplayedMnemonic('c');
    cp.add(l = new JLabel("Price per Unit: $", SwingConstants.CENTER), c);
    l.setDisplayedMnemonic('d');
    cp.add(l = new JLabel("Total cost of Item: $", SwingConstants.CENTER), c);
    l.setDisplayedMnemonic('e');
    cp.add(l = new JLabel("Total Value of Merchandise in Inventory: $", SwingConstants.CENTER), c);
    l.setDisplayedMnemonic('f');
    cp.add(l = new JLabel("Manufacturer:", SwingConstants.CENTER), c);
    l.setDisplayedMnemonic('g');
    cp.add(l = new JLabel("Restocking Fee: $", SwingConstants.CENTER), c);
    l.setDisplayedMnemonic('h');
              c.gridx = 1;
    c.gridy = 0;
    c.weightx = 1.0;
    c.fill = GridBagConstraints.HORIZONTAL;
    c.anchor = GridBagConstraints.CENTER;
    cp.add(fields[0] = new JTextField(), c);
    fields[0].setFocusAccelerator('a');
    c.gridx = 1;
    c.gridy = GridBagConstraints.RELATIVE;
    cp.add(fields[1] = new JTextField(), c);
    fields[1].setFocusAccelerator('b');
    cp.add(fields[2] = new JTextField(), c);
    fields[2].setFocusAccelerator('c');
    cp.add(fields[3] = new JTextField(), c);
    fields[3].setFocusAccelerator('d');
    cp.add(fields[4] = new JTextField(), c);
    fields[4].setFocusAccelerator('e');
    cp.add(fields[5] = new JTextField(), c);
    fields[5].setFocusAccelerator('f');
    cp.add(fields[6] = new JTextField(), c);
    fields[6].setFocusAccelerator('g');
    cp.add(fields[7] = new JTextField(), c);
    fields[7].setFocusAccelerator('h');
    c.weightx = 0.0;
    c.fill = GridBagConstraints.NONE;
              cp.add(firstButton);
              cp.add(previousButton);
              cp.add(nextButton);
              cp.add(lastButton);
                        JComboBox combo = new JComboBox();
    for(int j = 0; j < proMaker.length; j++)
    combo.addItem(proMaker[j].getName());
    combo.addActionListener(this);
              cp.add(combo);
              cp.add(button1 = new JButton(" "), c);
    f.pack();
    f.addWindowListener(new WindowAdapter()
    public void windowClosing(WindowEvent evt)
    System.exit(0);
    f.setVisible(true);
    private void populateFields(int index) {
    Maker maker = proMaker[index];
    fields[0].setText(Long.toString(maker.getNumberCode()));
    fields[1].setText(maker.getName());
    fields[2].setText(Long.toString(maker.getUnits()));
    fields[3].setText(Double.toString(maker.getPrice()));
    fields[4].setText(Double.toString(maker.getSum()));
    fields[5].setText(Double.toString(maker.totalAllInventory(proMaker)));
    fields[6].setText(maker.getManufact());
    fields[7].setText(Double.toString(maker.getSum()*.05));
    class Maker {
    int itemNumber;
    String name;
    int units;
    double price;
    String manufacturer;
    public Maker(int n, String name, double price, int units, String manufac) {
    itemNumber = n;
    this.name = name;
    this.price = price;
    this.units = units;
    manufacturer = manufac;
    public int getNumberCode() { return itemNumber; }
    public String getName() { return name; }
    public int getUnits() { return units; }
    public double getPrice() { return price; }
    public double getSum() { return units*price; }
    public String getManufact() { return manufacturer; }
    public double totalAllInventory(Maker[] makers) {
    double total = 0;
    for(int j = 0; j < makers.length; j++)
    total += makers[j].getSum();
    return total;
    }}

  • Help needed Urgently for XMLElement().please see

    Hi,
    Look at the xml code for XMLElement
    CREATE OR REPLACE FUNCTION create_sdixml(
    a_sdi_num           IN   NUMBER,
    RETURN CLOB
    AS
            -- Declare the variables
            queryCtx          DBMS_XMLquery.ctxType;
            v_xml             CLOB;
            v_xmlString       VARCHAR2(32767);
    BEGIN
    v_xmlString:=' Select SYS_XMLAGG(XMLElement("SDIEXTRACT",
                          XMLElement("SDI",
                                     S.Book_num,
                                     S.capacity_ind )))
                    FROM sdi S where S.sdi_num = ' || a_sdi_num;
    queryCtx :=DBMS_XMLQuery.newContext(v_xmlString);
    DBMS_XMLQuery.setRowTag(queryCtx,NULL);
    DBMS_XMLQuery.setRowSetTag(queryCtx,'SDIEXTRACT');
    v_xml    :=DBMS_XMLQuery.getXML(queryCtx);
    RETURN v_xml;
    END create_sdixml;On running this I get the ERROR:
    <ERROR>:Character ')' IS NOT ALLOWED AS AN XML Tag Name </ERROR>PLEASE Can anyone help regd the XMLELEMENT statements above??

    If I use this from the SQL prompt,it works fine.
    1  Select SYS_XMLAGG(XMLElement("SDIEXTRACT",
      2                               XMLELEMENT("SDI",
      3                                          active_flag)))
      4  From sdi
      5* where sdi_num = 22261
    SQL> /
    SYS_XMLAGG(XMLELEMENT("SDIEXTRACT",XMLELEMENT("SDI",ACTIVE_FLAG)))
    <?xml version="1.0"?>
    <ROWSET>
    <SDIEXTRACT><SDI>Y</SDI></SDIEXTRACT></ROWSET>
    SQL>Any suggestions? Shall I pass some alias to this?

  • Install problems - help needed desperately for new Java user

    I have been trying to install Java SE Development Kit 6 - Version 1.6.0_13. Initially I could not get the javac process to work no matter what I tried. After uninstalling and reinstalling numerous times I now have it so that my javac will rewrite my file from a .java to a .class file. Now when I try to execute my Hello.class file I am getting an error message....
    Error occurred during initialization of VM
    java/lang/NoClassDefFoundError: java/lang/Object
    Can anyone please help me fix this? I was really anxious to learn programming but all of these setbacks are really frustrating. I have basic books to help when I am up and running but nothing helps you with problems with installations.
    Please help!!!

    Enigmafae wrote:
    Thank you so much. Worked like a charm! I also installed from Explorer instead of Firefox. Maybe the Firefox installations were incompatible with my XP Environment????Worked fine for me... but I downloaded and then installed... I did NOT "run" the install over the network.
    I don't care I'm just so thrilled it worked. Now I can get to learning the actual programming that I have been trying to get to.
    Thx again for your help!I love it when a plan comes together.
    ~~ Hannibal.

  • Please help: need fix for battery not charging on iPhone 4 since install of IOS5 SAYS "NOT SUPPORTED BY THIS ACCESSORY

    Can someone help me fix my issue: not charging in wall outlet but will charge in usb port. It seems this happened right after install of ios 5.0.1
    Thanks so much!

    I have experienced the same issue. We have a USB power adaptor and a cable that we routinely use to charge our iPhones in the kitchen. While my iPhone4 keeps showing that error message, my wife's iPhone4S and all the kids iPods are charging just fine. Not a chance for a faulty power adaptor or cable.....
    It also started very recently. My iPhone can be charged with my computer, my car's charger so my dock connector has to be OK. It's as if the hardware signature of the USB power adaptor is no longer recognized. Also coincides with recent software update....

  • Javascript help needed (confirmation for cancel button )

    Hi guys!
    I am not good at javascript but am going to improve shortly :-). Now i need very quick fix.
    I'm using <html:cancel> button in Struts 1.1 and I'm using without thinking the following code:
    <html:cancel onclick="bCancel=true;" >
    <bean:message key="cancel.operation"/>
    </html:cancel>
    It is not that important though. I would like very much to alert user on possible loss of data (long multipaged form - could press mistakingly, who knows).
    Would you, please post the javascript code that is needed to accomplish this - just alert and if yes - cancel, no - leave alone?
    I'll really appreciate this.

    Thank you for your response.
    I also manage to write this. Is this correct?
    <script language="JavaScript">
    function ensure() {
    return confirm("Are you sure that you want to cancel this operation?");
    </script>
    <td colspan="3" align="center">
    <html:cancel onclick="bCancel=ensure();" >
    <bean:message key="cancel.operation"/>
    </html:cancel>
    </td>

Maybe you are looking for