Help needed - Excel macro error after Reader 11 update.

I wrote the following section of an Excel 2010 macro to open a selected pdf file with Adobe Reader, then copy all text to the clipboard & then return to Excel to paste &
process the data. The macro works with Adobe Reader 10. After I updated to Adobe Reader 11, Reader 11 will open but I get an error message of file not found. I've gone back &
forth between Reader 10 & 11 from clean installs & the problem stays with 11. The only thing I changed in the macro is the path for where Abobe Reader is located. The only
Adobe Reader preferences I change from the clean install setup is I set the Default View to Single Page continuous. Any help would be appreciated.
'Get the data file (pdf) to open
fileToOpen = Application.GetOpenFilename("PDF Files (*.pdf), *.pdf")
If fileToOpen = False Then Exit Sub
Application.Wait Now + TimeSerial(0, 0, 1)
'Filepath for Adobe Reader 10 program for Windows 64bit systems
MyPath = "C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe"
'Open PDF file with Adobe Reader
Shell MyPath & " " & fileToOpen, vbNormalFocus
'Wait for Adobe to Open file
Application.Wait Now + TimeSerial(0, 0, 5)
'Select all text [Ctrl-a](Adobe Reader set for Single Page Continuous)
SendKeys ("^a")
'Copy selected text [Ctrl-c]
SendKeys ("^c")
Application.Wait Now + TimeSerial(0, 0, 2)
'Turn off screen updating
Application.ScreenUpdating = False
Here's the only difference in the macro for Adobe Reader 11
'Filepath for Adobe Reader 11 program for Windows 64bit systems
MyPath = "C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe"

Hi,
I do not see any reason for this to not work.
Is there any difference between the preferences for RX and RXI. Please go to "edit" -> "Preferences" -> "Security(Enhanced)" and uncheck "Enable protected mode at startup".
Are you able to open any pdf from command line with the same command:
"C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" <<PDF_FILE>>
Thanks,
Amish.

Similar Messages

Excel macro error after deploying in Weblogic

Halo,
I have written excel macros and it is working fine.
but if the same file if i try to open from hyperlink after deploying in Weblogic server , I get the error
"error occured initializing the VBA libraries.
If Microsoft Visual Basic for Applications (VBA) was not installed, or was set to Install on first use,
(advertised, or set to install on demand) you may receive this error message.
Depending on the mode of installation used and the rights of the user to change current settings,
it is possible to install VBA through Control Panel, Add/Remove Programs, Microsoft Office, Add or Remove
features. If Visual Basic for Applications is not listed as an installable feature of Office, the administrator
of your system may have disabled it so it is impossible for you to install it. If VBA is not installed,
it is impossible to run VBA applications/projects on this computer. "
1. Even though Excel VBA application is installed in my machine , why am i getting this error.??
2. I would like to know is there any way to open the excel file even though if the excel software is not installed in client machine??
Appreciate your help.
Thanks.

Hi,
I do not see any reason for this to not work.
Is there any difference between the preferences for RX and RXI. Please go to "edit" -> "Preferences" -> "Security(Enhanced)" and uncheck "Enable protected mode at startup".
Are you able to open any pdf from command line with the same command:
"C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" <<PDF_FILE>>
Thanks,
Amish.

I keep getting a msvcr80.dll error after iTunes update failed?

I keep getting a msvcr80.dll error after iTunes update failed?

Seems the base of the problem is the update installation does not change the libraries but the software wants to see them changed. So the user has to go clear out all software that shares the libraries and then install the full version so they are rebuilt properly.

Moto X 2nd 2014 error after lollipop update

I've got moto x xt1096, and faced with terrible bug after update to 5.0.
Time to time on day faced with crash and restart of stock launcher with error "unfortunatelly google search (or app) has stopped"
I made a topic on motorola forum, but didn't find solution as yet. (tried to make FDR, safe mode, clean cache/data etc.)
Error after lollipop update . All Discussions (996) . MOTO X™ 2nd Gen . Forum . Motorola Owners' Forum
does anyone faced with that issue too?
And maybe someone know any date about 5.0.2 or other update for xt1096, maybe in next update it will be fixed?

Looks like it's been released:
Android 5.0 Lollipop Now Rolling out to the Verizon Moto X 2014 | Androidheadlines.com

RV082 IE certificate error after firmware update

Hello.
HELP! I have a RV082 with firmware 2.0.2.01-tm that keeps showing a "There is a problem with this website's security certificate" error message on every computer in the office after I updated to firmware 2.0.2.01-tm (previous version was 2.0.0.19-tm). I'd click on "Continue to this website" and be able to access the router on a few computers, but for our file server. I've tested on computers running XP, 7 & 8 using IE 8, 9, & 10 and there seems to be no pattern as to which ones will allow me to gain access and which ones won't. The file server is running Server 2003.
My questions are:
1. How do I get rid of the "security certificate" error message?
2. How do I get all computers to be able to gain access to the router on the ones that need access, but can't?
3. Why did this message show up after I updated the firmware?
Thanks in advance for any help/information on resolving this problem!
Alice

Dear Alice,
Thank you for reaching the Small Business Support Community,
I suggest you to check on the below threats, they might be helpful for you to try;
https://supportforums.cisco.com/thread/2071417
(Notice the crypto key generation does not apply to your case but the IE settings yes)
https://supportforums.cisco.com/message/3761503#3761503
I hope they help you working this issue out and please do not hesitate to reach me back if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

N97 system error after software update

hello there...
I've recently updated my N97 software to 21.0.045 (the last one)... and right after the update is finished, it gave me "system error" on installing... and now I can't get access to the clock, the calender and others... it even stops responding for a while each time I open sittings... and there is no theme effects when the screen flips to landscape even if it is on... please people, I really need help in that, the clock, alarms and the calender are soooo important for me !!!
thanks
Any fool can make things bigger, more complex and more violent. It takes a touch of genius and a lot of courage to move in the opposite direction.
Solved!
Go to Solution.

psychomania wrote:
I'm not being offensive. Just stating facts.
I am simply highlighting the fact so that the user will see it and be aware of what you suggested would do. Sorry if you took offence at that but the user comes first.
of course customer first , i'm doing this with happiness , cause i'll be very happy to help them without reaso
psychomania wrote:
starting petty arguments to cover up your mistakes like you did yesterday.
i'm not covering up my mistakes , what mistakes do u mean ?? yesterday , i said that i said that because it's in Nokia warranty of the authourised nokia resellers in my region and didn't know that this doesn't apply all over the world
psychomania wrote:
This forum exists to help people, not for you to spam posts without thinking about the consequences.
it's not for me, it's for all NOKIA users, and i'm not spamming as if i was that, so how could i stay all that time, solving others problems with alot of thanx
even if i solved 2 problems , that proves that i'm not spamming
so .... welcome bro in NOKIA USERS discussion board
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Disk Error after last update?

After the last Snow Leopard update our iMac stated givin an error every time we try to save a file. "cannot save due to disk error". Is this a bug in the update or some other problem????

Thanks for all your help guys! Apparently this was a software bug because we updated again and the error vanished.

Help with excel macros

Good morning:
I need help with a macro that let me solve the following situation:
1. I have an excel file with the following format:
Book
Chapter
Verse
60
5
7
43
14
1
50
4
6
50
4
7
51
3
15
23
26
3
2. First I want to convert the file to this format:
60.5.7
43.14.1
50.4.6
50.4.7
51.3.15
23.26.3
3. And finally to export them to a file called Bookmarks.xls with the format:
bgroup
verses
Default
60.5.7, 43.14.1, 50.4.6, 50.4.7, 51.3.15, 23.26.3
I have some 40 files that need to be converted. All have the same format but the number of rows varies. By the way I am using Excel 10.
Your help with this matter will be greatly appreciated.

Perhaps you can use this as starting point:
Sub Transform()
Dim wshS As Worksheet
Dim wbkT As Workbook
Dim wshT As Worksheet
Dim r As Long
Dim m As Long
Application.ScreenUpdating = False
Set wshS = ActiveSheet
m = wshS.Range("A" & wshS.Rows.Count).End(xlUp).Row
Set wbkT = Workbooks.Add(xlWBATWorksheet)
Set wshT = wbkT.Worksheets(1)
wshT.Range("A1") = "bgroup"
wshT.Range("B1") = "verses"
wshT.Range("A2") = "Default"
For r = 2 To m
wshT.Cells(2, r) = wshS.Cells(r, 1) & "." & wshS.Cells(r, 2) & _
"." & wshS.Cells(r, 3)
Next r
Application.Dialogs(xlDialogSaveAs).Show
Application.ScreenUpdating = True
End Sub
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Error after Bios update on VN7-591G

Hello Guys, I update my Bios to latest version which I found in Acer website - v1.13, everything goes smooth, but after the update my laptop boot with following error - "No bootable device''. I found how to bypass this problem - switching from UEFI secure boot to Legacy. And after this everything goes normal, but I want to use UEFI secure boot. Problem here is that when I move back from Legacy to UEFI I receive same error nobootable device and I can't run my OS. Any clue how can I fix this problem ? Thanks in advance,Br YoZone

Yeah, some of the stuff doesn't add up.....but it should be an easy fix. 1.backup all your important files to a different drive so you can retrieve them later (this is very important because you're going to wipe your SSD clean and start over) 2. Grab your windows 8.1 installation media as you'll need it soon 3. go in to your BIOS settings and load administrator defaults. It's F9 on my Acer computer, not sure what it is on yours. And then save and exit (possibly the F10 key) 3.5 go in to bios and enable boot menu and then save and exit 4. Boot your windows installation media 5. after you select your language, click "repair my computer" 6. Navigate in the menu until you find "command prompt" 7. Use diskpart clean (which will wipe your SSD clean) http://forum.crucial.com/t5/The-Cru/Reset-your-SSD-to-factory-settings-Windows-DiskPart/ba-p/162503 After you use the "clean" command as described in link above, type "convert GPT" and hit the enter key.And after you use the "convert GPT" command, type "clean" and then hit the enter key on your keyboard And then exit out of there to get back to your windows installation media drive main menu. 8. Navigate in the windows installation media menu until you find "shutdown", and shutdown your computer 9. Boot to your windows installation media and install windows. Install windows on the entire unallocated space. Do not partition and do not format. The windows installer will partition and format your SSD automatically for you. Edited: Edited to make sense since you don't have Acer OEM windows.

Customized Help does not work anymore after patch update.

Hi,
Our ECC system have a customized help (SAP Main Menu -> Help -> Company Help). It stoped working after the kernel upgrade. What do you think made it stop working.
I tried to update also the sapgui patch to 21 but still the help would not work.
thanks
kbas

.

Can't connect to Netflix: Sudden HDCP error after software update

I have been unable to connect to Netflix after I updated the apple tv software. I have tried the suggested remedies: unplug/replug HDMI cables; swap out HDMI cables; turn apple tv and tv on and off; reset; among others...Worked fine with my TV until the update. What the deuce? Can anyone help?

I am using the same Sharp Aquos LCD TV set and same ATV With the same apple HDMI cable that I have been using for years with sleek functionality and great enjoyment ....
There are two factors though - to consider -
1) the remote has been somewhat sluggish lately
2) The day before all of this happened I had removed the HDMI CABLE From my TV in order to put the Hdmi adaptor that connects through the mini DVI ( I think that is how it is called ) to my 2008 White MacBook. I wanted to watch a French Region DVD.
To my surprise , it did not work , but I thought that maybe the cable has suffered damage and I haven't used it for a long time.
I wonder if the connection in my TV is at fault. that can be checked tonight on another TV.
If that does not work I'll change the battery in the remote
And if none of this works , I'll buy another ATV.
Any success will be posted. but I have a nagging feeling now that my TV might be the cause of all this trouble.

Please Help Me, Windows Form Error After Install

help me to fixed this errors after install visual basic
Instances of this error (1)
1.
Hide Call Stack
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse..ctor(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse.GetUniverse(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkProvider..ctor(IVsDesignTimeAssemblyResolution assemblyResolution, IDesignTimeAssemblyLoader assemblyLoader, TypeDescriptionProvider parentProvider, IVsSmartOpenScope openScope)
at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.get_TargetFrameworkProvider()
at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.GetProvider(Type type)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.GetType(String typeName)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.System.ComponentModel.Design.Serialization.IDesignerSerializationManager.GetType(String typeName)
at System.ComponentModel.Design.Serialization.TypeCodeDomSerializer.Deserialize(IDesignerSerializationManager manager, CodeTypeDeclaration declaration)
at System.ComponentModel.Design.Serialization.CodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager manager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager serializationManager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.DeferredLoadHandler.Microsoft.VisualStudio.TextManager.Interop.IVsTextBufferDataEvents.OnLoadCompleted(Int32 fReload)

Hello,
I am afraid that I could not get any error message form that list you shared, is there any other message about that error?
To narrow down this issue, I would recommend you check the following suggestions.
1. Rebuild your project and debut it to see whether it could work.
2. If #1 works fine, then publish it and install that application to check whether there is any issue while installing.
3. If #2 works too, then you could share the screenshot and the detailed error message with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Tons of permission errors after iLife updates....

I always repair permissions before and after any updates..
Before the iLife update I had just one permission error with cups or whatever, I always get that one...
After the iLife update, I am having hundreds of errors every time I repair.. I also had a kernel panic this morning..
I ran FSCK, hundreds of errors.
I've used disk utility to repair disk.. No problems found.
I've used Disk Warrior, No problems found..
Anyone else experience this? Should I try and reapply the standalone installer? I hate to reinstall any software with all these permission errors.
Advice?

Yes, everything seems to be working fine.. I reapplied the standalone, no longer have hundreds of permission errors, but still have about 50 each time I repair.. The report shows all errors related to front row and iPhoto..
If it's no cause for concern, I won't worry about it..
Thanks.
Message was edited by: solsun

Spry Error After 2013 Update

This message is popping up on our company website after I updated the software.
MuseJSAssert: Error calling selector function: reference Error: Spry is not defined.
When I check the validator.w3.org it is saying that the errors are being cause from out of date and obsolute. Is there a way to uninstall that update and just got back to the old software package I had so I don't have to redue any of this again?

By the way the website is www.warrenrep.com

K3b (1.70.0) error after alst update

Hi,
I'm on a fully updated 32b Arch/KDE 4.4.1.
I can't burn a blank DVD (see log below).
The default temp directory of K3b has plenty (6.9 GB) free space.
Please advise.
Thanks
Miki Badt
-------------K3b log--------------
Devices
PHILIPS DROM5016L 95S1 (/dev/sr1, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM] [None] [%7]
_NEC DVD_RW ND-3500AG 2.16 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R,
DVD-RW, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential,
DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R,
DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P,
SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
K3b::IsoImager
mkisofs print size result: 0 (0 bytes)
System
K3b Version: 1.70.0
KDE Version: 4.4.1 (KDE 4.4.1)
QT Version: 4.6.2
Kernel: 2.6.32-ARCH
Used versions
mkisofs: 1.1.10
mkisofs
/usr/bin/genisoimage: Input/output error. Read error on old image
mkisofs calculate size command:
/usr/bin/genisoimage -cdrecord-params 1808,0 -prev-session /dev/sr0 -gui
-graft-points -print-size -quiet -volid 2009SML_&Tll1586 -volset -appid
K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK
-publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-miki/k3bAB6415.tmp -rational-rock -hide-list
/tmp/kde-miki/k3byU6415.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-miki/k3bSq6415.tmp -no-cache-inodes -full-iso9660-filenames
-iso-level 3 -path-list /tmp/kde-miki/k3buB6415.tmp
--------------end of log------------

Hi,
I'm on a fully updated 32b Arch/KDE 4.4.1.
I can't burn a blank DVD (see log below).
The default temp directory of K3b has plenty (6.9 GB) free space.
Please advise.
Thanks
Miki Badt
-------------K3b log--------------
Devices
PHILIPS DROM5016L 95S1 (/dev/sr1, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM] [None] [%7]
_NEC DVD_RW ND-3500AG 2.16 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R,
DVD-RW, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential,
DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R,
DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P,
SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
K3b::IsoImager
mkisofs print size result: 0 (0 bytes)
System
K3b Version: 1.70.0
KDE Version: 4.4.1 (KDE 4.4.1)
QT Version: 4.6.2
Kernel: 2.6.32-ARCH
Used versions
mkisofs: 1.1.10
mkisofs
/usr/bin/genisoimage: Input/output error. Read error on old image
mkisofs calculate size command:
/usr/bin/genisoimage -cdrecord-params 1808,0 -prev-session /dev/sr0 -gui
-graft-points -print-size -quiet -volid 2009SML_&Tll1586 -volset -appid
K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK
-publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-miki/k3bAB6415.tmp -rational-rock -hide-list
/tmp/kde-miki/k3byU6415.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-miki/k3bSq6415.tmp -no-cache-inodes -full-iso9660-filenames
-iso-level 3 -path-list /tmp/kde-miki/k3buB6415.tmp
--------------end of log------------

Help needed - Excel macro error after Reader 11 update.

Similar Messages

Maybe you are looking for