Help needed in Anolog output
Hello
I want to send sine wave from my computer to oscilloscope.i am using AO
wave vi.i am not getting continous signal.i get a discontinous signal.
fo example i am getting the sine wave on oscilloscope as i have shown
below.
i want continous signal iam using PCI-MIO-16E-1 card by NI.
i am using just basic function generator vi for sine wave and also AO
wave in my program.
can any one please provide source code or any help regarding this.
Thanks in Advance
Bye
Irfan
hi there
have you tried the continous voltage generation examples? (see attachment).
make sure your hardware is listed in the list of the supported devices for the examples.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
Examples.JPG 126 KB
Similar Messages
-
Help needed in the output file
Hi
Here is my query,
DECLARE
vProduct VARCHAR2(100) := 'Prints';
vProduct1 VARCHAR2(100) := 'Pk';
vName VARCHAR2(100) := 'Photos';
vName1 VARCHAR2(100) := 'B';
BEGIN
DBMS_OUTPUT.PUT_LINE('Product '||' '||'Name');
DBMS_OUTPUT.PUT_LINE('----------------------');
DBMS_OUTPUT.PUT_LINE(vProduct ||' '||vName);
DBMS_OUTPUT.PUT_LINE(vProduct1 ||' '||vName1);
END;
Product Name
Prints Photos
Pk B
But i need the output as like this
Product Name
Prints Photos
Pk B
With a tab space between each values even i have different lengths in the value.
Is this possible ?Ok Rob Thanks..........
Its worked fine -
Help needed with audio output (Mackie controller with Motu interface)
Hello,
I have booked my university's recording studio for the day and am having a complete nightmare! There's no engineer around...
I'm not getting any main level out of my Motu 828mk3. Logic is talking to my Mackie interface (Universal Pro, 8 channel digi mixer) fine, and but when I try and play (or record) anything there doesn't seem to be a level. On the Motu the 'out 1&2' LEDs light up, which makes me think that something is being received, but that isnt manifesting into an output. Interestingly, iTunes (routed through the same Motu) works and comes out of the speakers. All the Audio Preferences settings in Logic are set to the Motu.
Can anyone offer any suggestions? We have already wasted the entire morning trying to get a sound out of the speakers!
Thanks,
JohnThe question you need to ask is: why do you need a midi in/out? Do you want to connect your keyboard to it? I run my keyboard through USB and that works just fine.
Do you already have speakers? Because that seems to be missing here. Also, if you want to record yourself you'll probably need some headphones.
I don't know what your budget is (one mans low budget is the others mans highest, so..), but you can get some decent speakers and headphones for not too much money. But just know this, it's often better to save a little bit more instead of buying everything cheap and wanting to upgrade everything next year. -
Generating a square waveform of 100 KHz from one of the Anolog output channels of PXI-6713 ?
Hi
I am trying to generate a square waveform from one of the anolog output channels of PXI 6713.
I am developing my application in VC++
My requirement is a continous 100 KHz square waveform with 90% duty cycle and 1.5 V amplitude.
The following is the code i have used (i have removed error handling code):
***** code *******
i16 deviceNumber = 6; // PXI 6713 Device Id as per NI-MAX
i16 deviceNumberCode; // to be returned by Init_DA_Brds function
i16 chan = 2; // DAC channel 2
i16 numChans = 1; // only one channel is used for
i16 chanVect[1] = {2}; // DAC Channel 2
f64 gain = 1.0;
i16 binArray[10] = {0};
i16 group = 1; // default for most of the devices
u32 count = 10; // 10 data points
// 9 data points ON and 1 data point OFF constituting 90% duty cycle
f64 voltArray[10] = {1.5,1.5,1.5,1.5,1.5,1.5,1.5,1.5,1.5,0};
u32 iterations = 0; // Repeat waveform indefinitely
i16 mode = 0; // Disable FIFO mode / delay mode
f64 rate = 100000; // 100,000 points / sec
i16 units = 0; // points / sec
i16 timebase;
u32 updateInterval;
i16 whichclock = 0; // update clock
i16 operation = 1; // Start waveform initiation
Init_DA_Brds (deviceNumber, &deviceNumberCode);
WFM_Scale (deviceNumber, chan, count, gain, voltArray, binArray);
WFM_Group_Setup (deviceNumber, numChans, chanVect, group);
WFM_Load (deviceNumber, numChans, chanVect, binArray, count, iterations, mode);
WFM_Rate (rate, units, &timebase, &updateInterval);
WFM_ClockRate (deviceNumber, group, whichclock, timebase, updateInterval, mode);
WFM_Group_Control (deviceNumber, group, operation);
If I try to generate 10 KHz waveform with the same 90% duty cycle and 1.5 V amplitude, the waveform gets generated continously....
But for 100 KHz, itz generating continously....but only few waveforms....
Is there any hardware limitations ? I've tried changing the value of the timebase ( points / sec) and update interval etc...
plz help me
thanx in advance
sriram.Sriram;
The best way to get started is to run one of the NI-DAQ shipping examples. You can find a good example at
C:\Program Files\National Instruments\NI-DAQ\Examples\VisualC\Ao. Take the one named WFMDoubleBuf.c.
On that example, you will just need to change the data written to the buffer to met your application's pulse train requirement.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments -
Hi,
I am working first time on XML report bursting concept.
I have two remit to addresses in my report xml. I nedd to burst my report at address level.
This is my report xml:
<ARXSGPO>
<LIST_G_SETUP>
<G_SETUP>
<LIST_G_STATEMENT>
<G_STATEMENT>
<LIST_G_AMOUNT_DUE>
<G_AMOUNT_DUE>
<LIST_G_LINE_CLUSTER>
<G_LINE_CLUSTER>
</G_AMOUNT_DUE>
</LIST_G_AMOUNT_DUE>
<LIST_G_1>
<G_1>
<CF_REMIT_TO_ADDRESS1>Phoenix Centre </CF_REMIT_TO_ADDRESS1>
<CF_REMIT_TO_ADDRESS2>Millenium Way West</CF_REMIT_TO_ADDRESS2>
<CF_REMIT_TO_ADDRESS3 />
<CF_REMIT_TO_ADDRESS4 />
<CF_REMIT_TO_ADDRESS5 />
</G_STATEMENT>
<G_STATEMENT>
<LIST_G_AMOUNT_DUE>
<G_AMOUNT_DUE>
<LIST_G_LINE_CLUSTER>
<G_LINE_CLUSTER>
</G_LINE_CLUSTER>
</LIST_G_LINE_CLUSTER>
</G_AMOUNT_DUE>
<LIST_G_1>
<G_1>
<CF_REMIT_TO_ADDRESS1>Second Avenue</CF_REMIT_TO_ADDRESS1>
<CF_REMIT_TO_ADDRESS2>Poynton Industrial Estate </CF_REMIT_TO_ADDRESS2>
<CF_REMIT_TO_ADDRESS3 />
<CF_REMIT_TO_ADDRESS4 />
<CF_REMIT_TO_ADDRESS5 />
</G_SETUP>
</LIST_G_SETUP>
</ARXSGPO>
I am defining my control file like this.
<?xml version="1.0" encoding="UTF-8" ?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="ARXSGPO/LIST_G_SETUP/G_SETUP/LIST_G_STATEMENT/G_STATEMENT/LIST_G_AMOUNT_DUE/G_AMOUNT_DUE/
LIST_G_LINE_CLUSTERG_LINE_CLUSTER/LIST_G_1/G_1/CF_REMIT_TO_ADDRESS1">
<xapi:delivery>
<xapi:print id="printer1" printer="ipp://ipgpc1.us.oracle.com:631/printers/printer_p6op286a" copies="1" />
</xapi:delivery>
<xapi:document output-type="pdf" delivery="printer1">
<xapi:template type="rtf" location="location="/disk3/oracle/viscomn/java/oracle/apps/fnd/cp/sample/statement.rtf" filter=".//G_1[INTERNAL_NOTES='PRINTER']" />
</xapi:document>
</xapi:request>
</xapi:requestset>
1) Can I use CF_REMIT_TO_ADDRESS1 in the attribute select under the request element
2) In Database I have two printers attached for these addresses. I need to send output directly to printer. How can I differentiate details of
printer in control file for each address?
Please help me in this.
Thanks in advanceHi,
Thanks for your reply. when I am running my request I am getting java.lang.NullPointerException from Bursting program.
Details of log file.
Request ID: 6355955All
Parameters: ReportRequestID=6355950:
DebugFlag=YReport
Req ID: 6355950Debug Flag: Y
Updating request description
Updated description
Retrieving XML request informationNode Name:ORADB02
Preparing parameters
null output =/ora_code3/db04/db04comn/admin/out/db04_oradb02/o6355955.out
inputfilename =/ora_code3/db04/db04comn/admin/out/db04_oradb02/o6355950.out
Data XML File:/ora_code3/db04/db04comn/admin/out/db04_oradb02/o6355950.out
Set Bursting parameters..Temp.
Directory:/ora_code3/db04/db04comn/temp/[010808_021907137][][STATEMENT]
Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 ProductionStart bursting process..[010808_021907140][][STATEMENT] /ora_code3/db04/db04comn/temp/[010808_021907146][][STATEMENT] BurstingProcessor ::: Property Key ---> burstng-source[010808_021907146][][STATEMENT] Inside burstingConfigParser[010808_021907150][oracle.apps.xdo.batch.BurstingProcessorEngine][STATEMENT] ========================> startElement() ::: startDocument is entered <========================--
Exception
null
java.lang.NullPointerException at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingStartElement(BurstingProcessorEngine.java:1417) at oracle.apps.xdo.batch.BurstingProcessorEngine.startElement(BurstingProcessorEngine.java:1110) at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167) at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182) at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301) at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268) at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:227)
Please help me.
Thanks -
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Help needed for grouping.
Hi,
Help needed .
I have an internal table having 6 .
Ex :
f1 f2 f3 f4 f5 f6
a aa 11 p1 10 10
a aa 12 p1 20 20
b aa 11 p2 30 30
b aa 12 p2 40 30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1 f2 f3 f4 f5 f6
a aa 11 p1 30 30.
b aa 11 p2 70 60.
can anyone help me.How to do this..?
ThanksHere you go
DATA:
BEGIN OF cur_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(2) TYPE c,
f6(2) TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
f1 TYPE c,
f4(2) TYPE c,
f5 TYPE p,
f6 TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(5) TYPE c,
f6(5) TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
MOVE-CORRESPONDING cur_tab TO sum_tab.
COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
f4 = sum_tab-f4.
IF sy-subrc NE 0.
WRITE:/ 'Something went very wrong'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING cur_tab TO final_tab.
MOVE-CORRESPONDING sum_tab TO final_tab.
APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
WRITE:/1 final_tab-f1,
AT 5 final_tab-f2,
AT 10 final_tab-f3,
AT 15 final_tab-f4,
AT 20 final_tab-f5,
AT 25 final_tab-f6.
ENDLOOP.
and the output
a aa 11 p1 30 30
b aa 11 p2 70 60 -
Help needed : Extension manager cs6 not listing products
Help needed to Adobe extension manager cs6 to show all my cs6 products
I downloaded Extension manager from here Adobe - Exchange : Download the Adobe Extension Manager
My Computer windows xp 32bit
My Photosop version cs6
My Dreamweaver version cs6
I installed photoshop here : C:\Program Files\Adobe\Adobe Dreamweaver CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
<VariableForExMan>
<Data key="$sharedextensionfolder">$shareddatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration/Extensions</Data>
<Data key="$dreamweaver">$installfolder</Data>
<Data key="$dreamweaver/Configuration">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration</Data>
<Data key="$UserBinfolder">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE</Data>
<Data key="NeedOperationNotification">true</Data>
<Data key="QuitScript">dw.quitApplication()</Data>
<Data key="SupportedInSuite">CS6</Data>
<Data key="HostNameForCSXS">DRWV</Data>
<Data key="ProductVersion">12.0</Data>
<Data key="Bit">32</Data>
<Data key="DefaultLocale">en_US</Data>
</VariableForExMan>
</Configuration>
Extension manager installed here : C:\Program Files\Adobe\Adobe Extension Manager CS6
Photoshop Installed here: C:\Program Files\Adobe\Adobe Photoshop CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
<VariableForExMan>
<Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
<Data key="$photoshopappfolder">$installfolder</Data>
<Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
<Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
<Data key="$platform">Win</Data>
<Data key="$actions">$presetsfolder/Actions</Data>
<Data key="$blackandwhite">$presetsfolder/Black and White</Data>
<Data key="$brushes">$presetsfolder/Brushes</Data>
<Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
<Data key="$colorbooks">$presetsfolder/Color Books</Data>
<Data key="$colorrange">$presetsfolder/Color Range</Data>
<Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
<Data key="$contours">$presetsfolder/Contours</Data>
<Data key="$curves">$presetsfolder/Curves</Data>
<Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
<Data key="$duotones">$presetsfolder/Duotones</Data>
<Data key="$exposure">$presetsfolder/Exposure</Data>
<Data key="$gradients">$presetsfolder/Gradients</Data>
<Data key="$huesat">$presetsfolder/Hue Sat</Data>
<Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
<Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
<Data key="$layouts">$presetsfolder/Layouts</Data>
<Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
<Data key="$levels">$presetsfolder/Levels</Data>
<Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
<Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
<Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
<Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
<Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
<Data key="$patterns">$presetsfolder/Patterns</Data>
<Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
<Data key="$replacecolor">$presetsfolder/Replace Color</Data>
<Data key="$scripts">$presetsfolder/Scripts</Data>
<Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
<Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
<Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
<Data key="$styles">$presetsfolder/Styles</Data>
<Data key="$textures">$presetsfolder/Textures</Data>
<Data key="$tools">$presetsfolder/Tools</Data>
<Data key="$variations">$presetsfolder/Variations</Data>
<Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
<Data key="$workspaces">$presetsfolder/Workspaces</Data>
<Data key="$zoomify">$presetsfolder/Zoomify</Data>
<Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
<Data key="$lights">$presetsfolder/Lights</Data>
<Data key="$materials">$presetsfolder/Materials</Data>
<Data key="$meshes">$presetsfolder/Meshes</Data>
<Data key="$rendersettings">$presetsfolder/Render Settings</Data>
<Data key="$volumes">$presetsfolder/Volumes</Data>
<Data key="$widgets">$presetsfolder/Widgets</Data>
<Data key="$localesfolder">$photoshopappfolder/Locales</Data>
<Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
<Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
<Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
<Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
<Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
<Data key="$automate">$pluginsfolder/Automate</Data>
<Data key="$digimarc">$pluginsfolder/Digimarc</Data>
<Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
<Data key="$effects">$pluginsfolder/Effects</Data>
<Data key="$extensions">$pluginsfolder/Extensions</Data>
<Data key="$fileformats">$pluginsfolder/File Formats</Data>
<Data key="$filters">$pluginsfolder/Filters</Data>
<Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
<Data key="$importexport">$pluginsfolder/Import-Export</Data>
<Data key="$measurements">$pluginsfolder/Measurements</Data>
<Data key="$panels">$pluginsfolder/Panels</Data>
<Data key="$parser">$pluginsfolder/Parser</Data>
<Data key="$3dengines">$pluginsfolder/3D Engines</Data>
<Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
<Data key="$matlab">$photoshopappfolder/MATLAB</Data>
<Data key="UserExtensionFolder">$photoshopappfolder</Data>
<Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS6/Configuration</Data>
<Data key="DisplayName">Photoshop CS6 32</Data>
<Data key="ProductName">Photoshop32</Data>
<Data key="FamilyName">Photoshop</Data>
<Data key="ProductVersion">13.0</Data>
<Data key="IconPath">Configuration/PS_exman_24px.png</Data>
<Data key="SupportedInSuite">CS6</Data>
<Data key="HostNameForCSXS">PHSP</Data>
<Data key="Bit">32</Data>
</VariableForExMan>
</Configuration>
Please someone help me i cant install any photoshop extension because of this issue,,,Waiting for your reply ...thanks
Here is the results
I installed photoshopcs6 illustrator cs6 dreamweaver cs6 illustrator cs6 in the system , But nothing seems
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Path
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 15:55:49
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 55ms
Last pump = 62ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=0ms, left=16ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[15:55:49]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 15:55:50
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[15:55:49]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 16:05:49
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 1
Connector = PCD
Installed: 0
Running: 0
exman-6.0:
Path = C:\Program Files\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.exe
Installed: 1
Running: 0
Groups = (no groups defined) -
Help Needed REP-1800 Formatter error VGS-1701 Not enough memory
Hi. Gents
Help needed
I’m working on a Report, it gets some 2 million records and the report pages are approximately 52,000
It works fine if the pages are lesser then 48,000 or the data is less let say one and half a million, the problem occurs only after 48000 + pages formatted.
Report is generated successfully when trying to go to the last page it throw an error.
REP-1800 Formatter error
VGS-1701 Not enough memory
I have already gone through the metalink DOC Id 95505.1 as well as OTN
But all in vain,
Any comments or help much appreciated.
Details are:
Reports 6i (Clients/Server) on Windows platform
(Windows XP Professional with SP 2)
Database: Oracle9i Enterprise Edition Release 9.2.0.5.0
Computer:
Pentium(R) 4, CPU 3.00GHz, 1 GB of RAM
Still 20 GB free space
Thanks & RegardsI don't see the point in making a report with more than 48,000 pages, I think Al Gore will not be happy when you start printing it...
The problem might be caused by the fact that Reports needs to format all output at once, and then even 1GB of memory will probably be not enough. Formatting all pages at once is needed if you use pagination with displaying total number of pages. If you have this, try to get that out of the report definition and try again. -
EDI IDOC generation for interface with Vendor software help needed.
EDI IDOC help needed.
We are NOT an EDI shop, but have a project to output data to Sales Force.com
Sales Force requests IDOC output - eg. 810 Outbound Invoice.
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments?
I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Basicall we have a report program that the user enteres in the date range of Order/Quotes/Invoices they wish to extract, the the program needs to output a flat file (.txt) on the server which is then picked up by Sales Force.com.
Also, is there a way to have in the Partner Profile a generic Partner under the "Type KU" that can be used for all orders/invoices so I don't have to create a KU Partner Type for each and every Sold-To customer we have?
I am very new to EDI so any help would be greatly appreciated.
Thanks.
Scott.Hi Scott,
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
I know it's very tempting to use an interface for such loads if you anyhow have to create one. However, often the volume alone speaks against interface usage for such scenarios.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments? I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Well, the E2* segments basically reflect the external name of the IDoc segment, whereas the function modules you're referring to basically just create an internal version of the IDoc. Once the IDoc framework then passes the IDocs to the partner, the segment names usually (depends on how the IDocs are passed on) get converted to their external name. If there are multiple versions of a segment, then the version number will be appended to the segment name.
Note that IDoc segment definitions are only partially stored in the data dictionary. If you want to see all versions you should always use transaction WE31 to look at segments. There you can also see for example for E1EDK01 the several versions and when you then use in SE37 function module SEGMENT_EXTERNAL_NAME_GET you will see what SAP produces as the external name for segment E1EDK01. This function module is basically the one that handles the segment name translations.
Ignore the comments for subsystem, this is basically an option in SAP to possibly trigger further external tools (e.g. mapping etc.) for handling the outbound IDocs.
Again, the funny thing is that via the WE30 transaction, if i put in INVOIC02 as the Obj. name and see the segments, i can see that E2EDK01 there is a version 005, but if i go to SE11 and put in E2EDK01005 structure line and i get a "not found". We just have up to E2EDK01002.
In the old days SAP used to generate E1, E2 and E3* structures in the data dictionary (SE11). The E1* structure reflected the character type representation of an IDoc segment, whereas the other two (definition and documentation) contained actual references to data elements (e.g. if you used a quantity field). However, in newer releases those dictionary structures (E2* & E3*) are no longer generated, because they're superfluous (meta data defined via WE31 is sufficient).
Cheers, harald -
Help needed with CVI real time
Hi,
I am new to CVI real time and need help related to this. I will explain my scenario:
1. I have few configuration files (INI). Need to validate the files (range checking..etc) during start of the application.
2. When user clicks "START" in the user interface on the host machine, I need to generate outputs (analogs/discretes...) based on the settings in the config file and read some inputs from other instruments. ( I/O tasks like generating outputs/reading inputs i am planning to perform in RT side)
3. From the user interface, user can also change the config files. if user changes the files, again file validation needs to be performed. After changing the files, if user clicks START, need to take the newly enetered config files to perfom I/O tasks.
4. I am NOT using reflective memory for my application.
I am confused in the following area:
1. File validation during startup , do i have to perform on both host and RT side?????
2. if configuration files are changed in the host side by the user, how i have to send this latest file names to RT??? I think i should not send file names, i need to read from the file and its contents i need to pass to RT....Pls correct me , I am not sure about this....
3. If I have to send file contents to the RT, how I have to do that....means i have to use structures,..???
Please guide me. Any help would be highly appreciated.
Regards,
haari
Solved!
Go to Solution.Hey haari,
1. File validation during startup , do I have to perform on both host and RT side?????
This depends on the full range of responsibility for the INI files. If they are all needed simply to change what the I/O tasks are for, then you would technically only need to validate the INI file contents on the RT side. You could, however, validate on both sides if you wanted to. However, I would probably set it up such that I send a validation command to the target, have the target run a component of the code that validates the INI contents based on how I instructed it, and then return a message that says whether or not it met the requirements I specified. However, if you are concerned with offloading that process to the user desktop (instead weighing down the RT controller performance), you could FTP the file off of the controller and perform the validation process on the host side.
2. if configuration files are changed in the host side by the user, how i have to send this latest file names to RT??? I think i should not send file names, i need to read from the file and its contents i need to pass to RT....Pls correct me , I am not sure about this....
You can send them to the target over FTP. This can be done programmatically, through MAX, command window, or a Web browser.
3. If I have to send file contents to the RT, how I have to do that....means i have to use structures,..???
This is basically addressed in answer to question two. You would not need another structure in your RT code to handle the FTP receive component as this is handled by the FTP Client/Server communication. However, in the event that you successfully FTP a file to the target, you should likely send a message from the host to the target so that the target can respond accordingly and reload the file, reestablish the I/O values, run an idle procedure, or do whatever you like.
Hope this helps. Have a great day!
Tim A.
National Instruments -
Editable field with F4 help in alv tree output using cl_gui_alv_tree
HI
i need Editable field with F4 help in alv tree output using cl_gui_alv_tree
Regards
NareshHi Naresh,
Pass the field catalog with the additional parameter (ls_fcat-edit = 'X'.).
for F4 help if the data element have the search help it automatically will come. other wise include the additional parameter in the field catalog (ls_fcat-F4AVAILABL = 'X')
Reward if found helpful.
Regards,
Boobalan Suburaj -
Need to configure output type for adobe form
Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
ChandraHi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it. -
Extremely urgent help needed! I'm on a tight deadline. I'm working on a sequence, with all my settings set to DV. My client needs an AVI file as an output. After exporting using conversion, the file looks and plays fine, except for any transitions. At the start of each transition, there is 1 frame that is unrendered. I have rendered the entire sequence, and tried the export many times now, and I can't figure out what's wrong. I'm working on v5.1.4. Can someone please help?????
Thank you, kind sir! < </div>
Careful who you're callin' names around here, buddy!
Thank you for the kind words, that's why we're here. Hrdly anyone ever closes their threads on a positive note, I thank you for that, too.
Good luck with your future projects and those squeaky deadlines.
bogiesan -
1941W configuration help needed
Our Deployment Scenario:-
1941W Gigabit Ethernet 0/0 is connected to the PPOE connection of the ISP.
Gigabit Ethernet 0/1 is connected to the wired LAN
I have created 2 wireless radio Cisco_Kamran_BGN which is operating at 2.4 Ghz Devices and Cisco_Kamran_A which is operating at 5Ghz Devices.
I have created 2 VLans for the Wireless.
Vlan 10 for Cisco_Kamran_A 192.168.10.x
Vlan 11 for Cisco _Kamran_BGN 192.168.11.X
The problem is the Wireless users are not getting the IP address from the respective DHCP server which has been configured on the Router.
Can please any from the community help me and show me where I am missing the configuration.
Please find my router & ap configuration below.
Router Configuration
Router#
sh run
Building configuration...
Current configuration : 3022 bytes
! No configuration change since last restart
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 $1$TdQt$npYeaf/W0kRElcfMggzJ31
no aaa new-model
service-module wlan-ap 0 bootimage autonomous
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.50
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address 192.168.11.1 192.168.11.10
ip dhcp pool DHCP
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_A
network 192.168.11.0 255.255.255.0
default-router 192.168.11.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_BGN
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 195.225.241.222 213.42.20.20
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO1941W-E/K9 sn FCZ1553C1VK
hw-module ism 0
redundancy
bridge irb
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered GigabitEthernet0/0
arp timeout 0
no mop enabled
no mop sysid
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Wlan-GigabitEthernet0/0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
no ip address
interface Vlan10
ip address 192.168.10.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Vlan11
ip address 192.168.11.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp pap sent-username xxxxxx password 0 xxxxxx
ppp ipcp route default
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list DSL_ACCESSLIST interface Dialer1 overload
ip access-list extended DSL_ACCESSLIST
permit ip 192.168.0.0 0.0.255.255 any
control-plane
line con 0
password xxxxxx
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
password xxxxxx
login
transport input all
scheduler allocate 20000 1000
end
Router#
Router#
Router#
Access Point Configuration
ap#
ap#
ap#
sh run
Building configuration...
Current configuration : 2603 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$JxdQ$a2/00bWJuhUKP9QLC94YD/
no aaa new-model
dot11 syslog
dot11 ssid Cisco_Kamran_A
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 1045081417161C5A555C7A7B
dot11 ssid Cisco_Kamran_BGN
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 020D05561907017015165949
username Cisco password 7 14341B180F0B
bridge irb
interface Dot11Radio0
description 802.11bgn radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
broadcast-key change 3600
ssid Cisco_Kamran_BGN
antenna gain 0
station-role root
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface Dot11Radio1
description 802.11a radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid Cisco_Kamran_A
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.10
description 802.11a bridge
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0.11
description 802.11bgn bridge
encapsulation dot1Q 11
no ip route-cache
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
no activation-character
line vty 0 4
login local
end
ap#
ap#
ap#Hi Stepehen,
Did the configuration as per your advice but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
Home
Re: 1941W configuration help needed
created by Stephen Rodriguez in Getting Started with Wireless - View the full discussion
conf t
interface Dot11Radio0
no ssid Cisco_Kamran_BGN
no encryption mode ciphers aes-ccm
exit
interface Dot11Radio1
no encryption mode ciphers aes-ccm
no ssid Cisco_Kamran_A
exit
dot11 ssid Cisco_Kamran_A
vlan 10
dot11 ssid Cisco_Kamran_BGN
vlan 11
exit
interface Dot11Radio0
encryption vlan 11 mode ciphers aes
ssid Cisco_Kamran_BGN
exit
interface dot11radio0.1
encapsulation dot1q 1 native
bridge-group 1
interface dot11radio 0.11
encapsulation dot1q 11
bridge-group 11
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
exit
interface Dot11Radio1
encryption vlan 10 mode ciphers aes-ccm
ssid Cisco_Kamran_A
interface dot11radio1.1
encapsulation dot1q 1 native
bridge-group 1
interface dot11radio1.10
encapuslation dot1q 10
bridge-group 10
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
end
wr
Reply to this message by going to Home
Start a new discussion in Getting Started with Wireless at Home
Maybe you are looking for
-
Hi, I try to run Power View featrue in SharePoint 2013 but still I get error The feature: "Power View" is not supported in this edition of Reporting Services. I have already installed PowerPivot Add-In and Reporting Service Add-In I see new content t
-
I'm trying to embed an image in a form. For example: show a persons picture with his name address etc. Can someone tell me exactly how to do this? The form will contain fields that are updateable. I tried this: Created a region; Created items A,B,C i
-
CRM_ORDER_MAINTAIN Documentation
Good afternoon masters I 'm trying to use CRM_ORDER_MAINTAIN ... related functions. I 've been looking for documentation unsuccesfully. My problem is that I need to Copy Categorization from Interaction Record to Service Request. SAP says this scenari
-
Hi Gurus When viewing an Employees details in the Account Details of the WEB UI. In the heade section there is an area call Worked, in this section is a Label "Type" with a Drop Down. What is this field used for and when do I configure the drop down
-
I have a docx file that I recieved in an e-mail. It is password protected. I have the password but I do not know how to open it.