Help needed in Customer exit variable

Hi Experts,
We have a scenario as below.
User enters fiscal year period.Based on the fiscal year period,entire year will be selected.
Row would contains
0fiscper3(Fiscal months from Jan to Dec)
Column contains Amount(Actual or Forecast)--There is a restricted keyfigure on amount.If value type=60 then forecast
and value type=10 then actual amount
If the user enters 002.2010 then it should give Actual values ie value type=10 for 001.2010 and 002.2010.For all values greater than 002.2010, it should give forecast values(value type=60)
Report Format.
Jan----
Actual Value(value type=10 in the column for amount)
Feb----
Actual Value(value type=10 in the column for amount)
Mar----
Forecast Value(value type=60 in the column for amount)
Apr----
Forecast Value(value type=60 in the column for amount)
May----
Forecast Value(value type=60 in the column for amount)
Jun----
Forecast Value(value type=60 in the column for amount)
Jul----
Forecast Value(value type=60 in the column for amount)
Aug----
Forecast Value(value type=60 in the column for amount)
Sep----
Forecast Value(value type=60 in the column for amount)
Oct----
Forecast Value(value type=60 in the column for amount)
Nov----
Forecast Value(value type=60 in the column for amount)
Dec----
Forecast Value(value type=60 in the column for amount)
I know that i have to create a customer exit variable for value type
But in this scenario.the value for value type may change in each row based on fisper3(month).
How can i obtain such a scenario in the customer exit
Your help will be appreciated.
Thanks,
Senoy
Edited by: senoy laxman on Feb 15, 2010 6:42 AM

Hi Senoy,
you have to create two customer exit variables for fiscal year period(0fiscper) as given below.
1. for actual values (value type=10), coding in cmod such that showing values less than and equal to user input values.
2. for forecasting values(value type=60,)coding such that showing values greating than user input values.
use the first varible in the first selction and the second varible in the second selection in the given below structure(use the structure in rows)
use the fiscal period user input varible in the third selection in the given structure below.
structure
selection - (Actual)-restrict with value 20 and first customer exit variable .
selection -(Forecast)-restrict with value type 60 and second customer exit variable.
Selection - 0fiscper
Add the key figure 0Amount in the columns or in rows(in the selection of second structure) as per your requirment.
hope this helps you.

Similar Messages

Help needed in customer exit code to exclude a value

Hi Gurus,
I need to use a Customer Exit Variable to read the values for a characteristic. Based on one indicator I have to include or exclude a value. I am trying to use the code as below. But, it is saying "AError for variable in customer enhancement ...".
Code
the variable is a multiple single values customer exit variable
         zl_s_range-low = z_placc.
         CLEAR zl_s_range-high.
         if z_pl_ind = '1'.
           zl_s_range-sign = 'I'.
         elseif z_pl_ind = '2'.
           zl_s_range-sign = 'E'.
         endif.
          zl_s_range-opt = 'EQ'.
         APPEND zl_s_range TO e_t_range.
Please help me to solve the issue,
Thanks in advance,
Regards,
aarthi

Hi Uday,
Thanks for your response.
Below is the complete code.
WHEN 'ZV_CSS11'.
IF I_STEP = 1.      "Before Pop-up
   select * into table i_tp_tab_pl from /BIC/QZ_TP_PLAC
    where /BIC/Z_TP_PLAC = '11' and
        DATEFROM <= sy-datum and DATETO >= sy-datum.
if sy-subrc = 0.
     LOOP AT i_tp_tab_pl.
         clear zl_s_range.
         z_placc = i_tp_tab_pl-/BIC/Z_PLACC.
         z_pl_ind = i_tp_tab_pl-/BIC/Z_PGLA_IND.
         zl_s_range-low = z_placc.
         if z_pl_ind = '1'.
           zl_s_range-sign = 'I'.
         else.
           zl_s_range-sign = 'E'.
         endif.
          zl_s_range-opt = 'EQ'.
         APPEND zl_s_range TO e_t_range.
         clear z_placc.
         clear z_pl_ind.
      ENDLOOP.
endif.
endif.
Thanks in advance,
Regards,
aarthi

Function module needed for customer exit variable need to use in Bex report

Hi Experts,
I have a requirement where i need to get Cummulative result between two interval periods.
If user gives single mandatory input value - 002-2009
for one Scenario:-
Project start Date untill Pervious year i.e December 2008
Where project start date will get from one of the field in my BW CUBE
can anyone help for the customer exit function code for this scenario. As i am into BI i dont have idea in ABAP.
Please help sample cod for this .
Thanks,
Anil.

I had created one customer exit which had fullfill my requirement.

Help neede for customer exit

Hi,
Please let me know as to how can i derive the 1st day and last day of the fiscal week. I have the fiscal week data eg: 201004 in the cube
Also how can i derive the 1st day and last day of the fiscal year quarter. I have the fiscal quarter data eg: 20101 in the cube
any function module to get the 1st day and the last day of this week and the quarter?
regards,
Mahesh

Hi Mahesh,
Use Function Module WEEK_GET_FIRST_DAY to get the first day of the given week.
You can get the last day of the week by Adding 6 to it OR y using Same function module for next week and get first day of the next week. and Make it - 1.
Regards,
Pratap Sone

Error creating Customer Exit variable, please help

Hi Experts,
This is the scenario, I need to obtain the convertion rate from the table TCURR in order to convert several currencies to USD, so I created a Customer Exit variable that gets the Period and based on that obtains the conversion rate for the last day of the given month from TCURR, the problem is when I created the Formula Variable to get the value from the Customer exit variable I got the following error:
'ZVARREGEXIT' ALREADY EXISTS; SELECT A DIFFERENT NAME.
But in not using that name anywhere on my variables creation, Im doing something wrong? How can I check wheres is that variable being used.
Ideas, comments are always welcome and appreciated.
Regards.

Hi Ed,
Open Admin Workbench (RSA1) and choose Transport Connection --> Object Types --> Query Elements --> Variable --> Select Objects. Find the variable of interest and transfer it back to the main screen, then right-click and choose 'Display Description'. That will show you a "where used" list of queries, workbooks, etc.
Next, you can use the previous technique to open one of the queries, find the variable in the query, and determine which InfoObject it is associated with.
Hope this helps!
Regards,
Saurabh

ABAP code Help for Customer Exit variable

Hello All,
Can anyone provide ABAP code for a customer exit variable please?
Requirement:
0CALYEAR(InfoObject) - ZCALCYR (Variable) <b>Calender year with default value actual year</b>.
Proiperties of variable: single value,mandatory,ready for input,can'be changed in query navigation.
i have read some docs on customet exit variables which i got from SDN but i found it's difficult for me to get this as i am not that good in ABAP.
Thanks,
Rakesh.

Hi,
   Just check the below code. You just need to make slight changes I believe. Hope this helps you.
In CMOD..
Sample code
INCLUDE LXRSRF01                                                   *
data: l_s_range type rsr_s_rangesid.
case i_vnam.
when 'ZCALCYR'.
    if i_step = 1.
     l_s_range-low = sy-datum+0(4).
        append l_s_range to e_t_range.
    Endif.
Endcase.

Need logic to find Year to Date for customer exit variable

Hi to all,
I am creating customer exit variable for query .
query should display data according to current system year from jan till current system date.
here senario is like that user never enter year and query will automatically will fetch the data according to current year starting from jan to current system date.
example.
current year 2010 and today is system date is sep 29 2010, so query will display data from jan 2010 to current data sep 29 2010.
please can any one provide me logic for that.
any code .
regards
pavneet rana

Hi,
You need to create the characteristic customer exit variable of type select-options. Restrict your keyfigure based on this variable.
In the logic in CMOD,
write as below
i_step =2.
case i_vnam.
When 'exit variable'.
temp = sy-datum+0(4).
concatenate temp '0101' into temp1.
l_s_range-low= temp1.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-high= sy-datum.
append APPEND l_s_range TO e_t_range.
endcase.
For any further help on customer exit based variable, please refer below article.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f119d9-922d-2c10-88af-8c016638bd90?quicklink=index&overridelayout=true
Edited by: Rahul K Rai on Sep 29, 2010 3:09 PM

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

Customer exit variable - internal table in BEX

Hi,
i am running a report and using variables in it.
The report runs over a info cube. There are few challenges in it.
One of the variable is posting date, and when user enters posting date i need to negate it with current system date.
If the negated value is greater than 28 then i need to exclude documnet type 'YG' and display the query, else i need to include the dcumnet type 'YG' and document type ' '. The above logic can be well implemented via a customer exit variable(for posting date) using an internal table. We have internal tables like C_T_DATA which is used in data source enhancement, which help us to implement our own desired logic.
Do we have such kind of internal tables, based on which the report output (result set) is derived?
i know that we have l_t_range and e_t_range, but dont know their usage, some one can explain in detail about them?
Thanks in advance.

Hi Selva & Lakshmin,
The code given by Selva is almost correct . If my understanding is clear , you also wanted to include document type ' ' when the negated value is less than 28 .
Modification in Selvas Code :
Variable 'V_DOCTYP' must be of type Multiple Single Values.
DATA : V_DATE LIKE SY-DATUM.
DATA : V_DAYS TYPE I.
if i_step = 2.
when 'V_DOCTYP'.
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZV_PDATE''.
IF SY-SUBRC = 0.
V_DATE = loc_var_range-low.
ENDIF.
V_DAYS = SY-DATUM - V_DATE.
IF V_DAYS > 28.
l_s_range-low = 'YG'
l_s_range-sign = 'E'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ELSE.
l_s_range-low = 'YG'
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
clear l_s_range.
l_s_range-low = ' '.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIF.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh

Error Message : " No value could be determined for Customer Exit Variable "

Hello BI Experts ,
I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed.
The reference character is '0FISCPER' .
I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
==================================================================
case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
===================================================================
After that I use this 'ZYTD_PERIOD' variable in the query .
Also I have used the variable 0P_FPER in another structure.
When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
I am getting below error message ,
*No value could be determined for variable ZYTDPERIOD*_
Below is details of this Error message ,
Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
=======================================================================
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
=====================================================================================
Is there any special settings needed before writing BEx Customer Exit ?
I have already created a project in CMOD and assinged a proper RSR00001
and EXIT_SAPLRRS0_001 and project is active.
Any help please ....
Regards ,
Amol

My Code is as below ,
          case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
              ENDCASE.

How to use customer exit variable in the report

Dear All,
i want to use a standard customer exit variable in the report properties.
In the Bex Query Designer right hand bottom you will find two buttons "Properties" and "Task". Click on task you will get different option. Choose properties from there and then select "variable sequence tab".
I need to add a standard variable there. How can i achieve it?
Appreciate your early help.

You need to add variable to corresponding charctertic then you can get that varaible for sorting the sequence....
If 0CUST is the varaible then you need to assign it 0CUSTOMER then 0CUST will be available for the sequence.
Edited by: shanthi bhaskar on Apr 2, 2009 5:41 PM

HOW TO CREATE A CUSTOMER EXIT VARIABLE

<Moderator Message: use lower case letters next time, we don't want you to shout. --> see rules of engagement>
hi,
How to create a customer exit variable..!
in a query designer i have created the customer exit variable ,in the cmod i have created the project
for the exit rsap0001 and kept the break-point....but when i executing the query via BEX-Analyzer
where control not stoping in the break-point..
can any one help me ..what is the approch i need to do.because i new to BI..
Regards,
shahina.....!
Edited by: Siegfried Szameitat on Dec 17, 2008 10:37 AM

Hi Shahina,
1. Create formula variable var1 from to date using replacement path.
2. Create another formula variable var2 for current date using customer exit or you can use standard
formula variable for current date
3. Create calculate key figure ckf using var1 & var2.
ckf = var1 - var2.
Thanks == points
Regards
Sudheer
Edited by: SUDHEER on Dec 17, 2008 10:41 AM

Authorization (rsecadmin) with customer exit variable

Hello,
I need to maintain authorization on 0CALMONTH with a customer exit variable.
0CALMONTH is "authorization relevant"
I created a variable of type "customer exit" : ZVAR001 (this variable is OK, I checked its value in a query)
I created a new authorization object with 0CALMONTH = $ZVAR001.
When I run my query I have a message due to authorization error.
If I change my authorization object by replacing my variable ($ZVAR001) by a constant value I have no authorization problem.
I don't understand why...
Error logs don't help me to solve my problem : I have the following message "Message EYE007: You do not have sufficient authorization" and system just says I have "0CALMONTH I EQ $ZVAR001 " but doesn't precise values under variable ZVAR001
Thanks for your help

Indeed problem was in costumer exit because I used condition with "I_STEP". Since I have delete my condition I have no authorization problem with my variable....

Code (ABAP) for the Customer Exit Variable (CMOD)

Scenario
An employee can purchase any no of policies in a day or month.each policy will have start date and expiry date.
My requirment
Count all the policies(valid) by employee on a ranges basis exception reporting
(0-10;10-20;20-30;30-40) and then able to drill down by policy start date and expiry date.
As per the requirment is to show policies that employee had with in the give date intreval which are not yet expired (active) i need to write a condition that will count only policies whose Expiry date is > Current calender day
As Policy Expiry Date is a char i am converting it to KF using fourmala variable so that i can write a condition on it using current cal day formula variable sap exit
Requirment:
Need a code for SAP exit variable which will meet the following requirment
There are the following 2 variables in the query
1) A variable (User Input)(Date Range) on Policy Start Date and
2) Authorisation Variable which is based on Authorisation Object(Analysis Authorisations)
I need a SAP Exit variable (CMOD) that will
BAsed on the user entered Policy Start date it has to pick all the policy exiry date of the policies and display all the policies whose expiry date is greate than Sy Date (Current Date) and also if Policy Expiry Date is blank or # it has to display
Arun supplied me with the below code...but i think it doesn't include blank expiry date or #...as i am new to ABAP please update me with releavent code
Policy Start Date : ZPST_DTE
Policy Expiry Date: ZPSP_DTE
Variable (Type:Customer Exit) on Expiry Date: ZEEXP_DTE
Arun's Code:
IF I_STEP = 1.
CASE V_NAME
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.
Please modify above code to include Blank or # values of Expiry Date
Thanks Arun
Please ask if you need further info as this is urgent
Thanks

Hi Arun,
Thanks for the help...will definetly assign points
(Closed the previous thread)
Please spare bit of ur time as this is my first ABAP Code
Can i include 2 restrictions..# and Variable (Customer Exit)...But how can i include Records with Blank Values
As the data from Source system the expiry date is filled up with either Date or # or Blank...my requiorment is to include all 3 and
Question:
As there are 2 other variables defined ..one on Policy Start Date (User input date intreval) and Location (Authorization Variable..Analysis Authorisations)...Do i need to change I_STEP in the code
(Req: Reports shows all the(still valid) policies emp has purchased between 2 give date (Variable on Policy Start date)
IF I_STEP = 1.
CASE V_NAME
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.

Customer Exit Variable CP Option

Hi,
we ha ve created a customer exit variable ZVAR_CP (Detail Select Option, Optional) on Characteristic defined as a char (6)
The code to fill this variable is:
WHEN 'ZVAR_CP'.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'CP'.
        l_s_range-low = 'F*'.
        APPEND l_s_range TO e_t_range.
      ENDIF.
Executing the query with this variable we obtain this message: CP in variable 'ZVAR_CP' is not supported; characteristic is numeric, but in the system the characteristic related to the variable IS NOT NUMERIC.
Any idea? We need to filter all master data value that begin with F. Why CP option give error?
Thanks,
Veronica

Hi,
I think your requirement is something to populate all values that start with 'F' into the variable selection.
In this case you will have to get your values into an internal table and then do something like below:
when 'ZVAR_CP'.
if i_step = 1.
*      populate the table IT_TABLE with your values
*      you can use a select statement with condition
*      (where field like 'F%') to get values equivalent to 'F*'
   Loop at IT_TABLE into WA_TABLE.
        l_s_range-SIGN = 'I'.
     l_s_range-OPT = 'EQ'.
        l_s_range-LOW = WA_TABLE-field.
     append l_s_range to e_t_range.
   Endloop.
endif.
Hope this helps,
Regards,
Joe

Help needed in Customer exit variable

Similar Messages

Maybe you are looking for