Help needed in displaying BI Queries, Views in CRM 2007

Hi Friends,
I am working on an upgrade project( CRM 2007 from CRM 5.0). In the earlier system, there are using portal for opportunity management. In portal on clicking Reports workcenter link, they were getting the following options.
Open Query - This gives the list of BI Queries.
Open View - This gives the list of views that are already created.
Save View - This gives the provision to save the view.
Now i need to replicate this functionality in NEW UI(CRM 2007). I am stuck up in how to approach this requirement.
Any pointers on this will be really helpful.
Thanks,
Udaya

Hi,
BI Content is shipped in the delivery version (D version). Before you can work with BI Content objects, you have to copy them from the delivery version (D version) to the active version (A version). This means that you must activate the BI Content.
You can collect the delivered BI Content in the function area BI Content of the Data Warehousing Workbench and copy it to the active version. This ensures that all additional required objects are automatically included, as is the sequence of activation. You can choose whether you want to copy, match, or not install the BI Content objects.
If you do not compare the versions, the delivery version is used and the active customer version is overwritten when you activate the BI Content.
We recommend that you install BI Content objects in the following cases:
After a BI Content release upgrade
An upgrade to a new BI Content release usually contains a large number of new and modified BI Content objects. If you want to use the new and modified BI Content, you have to reinstall the BI Content objects. Refer to the comments in the Release Notes for BI Content documentation for the particular release. They are available on help.sap.com ® SAP NetWeaver ® BI Content. In some cases, we recommend explicitly that you install the A versions of certain objects.
After installing a BI Content support package
Refer to the SAP Notes that are delivered with each Content support package. These SAP Notes contain information on why certain BI Content objects are being redelivered. An overview of the SAP Notes can be found at service.sap.com/bi ® Product Information SAP NetWeaver 7.0 BI ® Support Packages ® BI Business Content.
For More Information Go through the below link
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
Regards,
Marasa.

Similar Messages

Alternatives to WAD for displaying BI Queries / Views in Enterprise Portal

Hello experts,
we have been using WAD 3.5 extensively for displaying BI Querys in a web-capable form within our Enterprise Portal.
Since our users are not BW-familiar in general, we have the requirement to provide a very easy GUI and navigation.
Actually in 3.5 we are able to fulfill this requirement by extensive use of Javascript to modify the look & feel and also the behaviour of the Web applications.
In WAD 7.0 this is not any longer possible, as SAP restricted the Javascript usage, in 7.0 it is impossible to change the HTML code by accessing the DOM, which is very uncomfortable for us, since our users are familiar with the our (javascript-driven)convenient BI Web interfaces.
My question now: are there any alternatives for displaying BI content (queries / views) in the portal apart from using WAD web templates?
I read that the Visual Composer is now capable of processing BI content. Does anyone have experiences with this? And if yes, how does this compare to the WAD?
I also read that there is a BI Java SDK which contains an API to the OLAP processor. Is the BI Java SDK an alternative to WAD? And if yes, is it possible to integrate Java SDK with Web Dynpro or is it plain Java requiring the usage of Servlets / JSP to render the UI?
Thanks in advance for your help,
best regards,
Thilo

Thilo Krawietz wrote:
I also read that there is a BI Java SDK which contains an API to the OLAP processor. Is the BI Java SDK an alternative to WAD? And if yes, is it possible to integrate Java SDK with Web Dynpro or is it plain Java requiring the usage of Servlets / JSP to render the UI?
BI SDK is a Java library without UI support. Think adout it as a JDBC-type API with multidimentional data support. It's the way to go if you need to get to the data itself but it is not appropriate if you want low-effort reporting solution.

Help needed in Service Ticket view version CRM 2007

Hi,
We have a requirement to replace the Service Level Agreements with Location details screen (custom defined) in the Service Ticket View. I did this in 5.0 version,but couldnt replicate it in the CRM 2007
version.
Here is how I proceeded in the new version.
Instead of creating a new view, I approached the Adding required
context node approach and populated the fields that we need.
1. I enhanced the component ICCMP_BTCTR
2. I added Context node BTActivityH ( I did not link it to any CutomController in the wizard, but defined dependency to Higher LevelContext node BTAdminH, with BOL relation, BTHeaderActivityExt, and
activated the check box Always Create Instance and let the the wizard to finish off.
3. Then using the UI Config tool, I copied the standard configuration to my custom config for changes, I removed all the 3 fields that are there in the standard configuration, and replaced with the attributes
of BTActivityH using UI Config tool in the component work bench. All fields are Input ready fields (not set for Display only).
4. When I open the Service Ticket view to access these fields, in the UI of Service Ticket, I realized that they are display only fields.
5. Then I created the attributes, ( to access GET_I_S_*) methods of the attributes, and I externally set rv_disabled = FALSE in the metod (say GET_I_S_CITY)
6. Now I am able to input values for those fields, but still I am not able to save those entries that I entered in there.
I guess I am missing some thing in the wizard, like linking custom
controller or dependency relations.
Is it mandatory for me to bound the context node to component
controller Node (BTActivityH). If so how can I bound it.
Please advice me.
Thanks and regards,
Sreekanth

Hello Sreekanth,
I think that the fields are read-only and not saved because your context node is not bound to a custom controller. (Even though your higher level node, BTAminH, is probably bound to a CuCo)
The code to perform the CuCo binding is mostly coded in the CREATE_BTACTIVITYH (controller class->typed_context->create_btactivityh or check create_context_nodes to see how the method is called)
like this:
owner->do_context_node_binding( iv_controller_type = cl_bsp_wd_controller=>co_type_custom
                                  iv_name            = <name of the CuCo>"#EC NOTEXT
                                  iv_target_node_name = '<the context node of the CuCo to bind to>'
                                  iv_node_2_bind = <your context node> ).
Now, save yourself a headache and a lot of debugging time and just create a new context node through the wizard again, this is much easier than trying to 'fix' it yourself! Once you have created your new context node you can delete the old one by deleting the attribute in the typed_context class.
Hope this helps!
Reward points if useful!
Kind regards,
Joost

Help needed- Reg: Display page number in SQL Reports

Hi,
I need to display page number in " page no: X of Y " format where X is current page & Y is total number of pages. Now I am able to display only the current page using ' sql.pno '. but not able to display in ' X of Y ' format.
Any inputs in this regard will be helpful.
Thanks & Regards,
Anilkumar.

Hello Anil,
If you have the above requirement for Oracle Reports then follow the steps:
1.In the Paper Layout view or Paper Design view, choose InsertPage Number.
2. In the Insert Page Number dialog box, choose from the list the location for the page number.
3.Click the desired page number format: Page Number Only or Page Number and Total Pages.
Cheers,
Suresh

Help needed with conditions in Table View

Another question regarding the dashboard we are building:
We use a custom function module to display marketing attributes for a particular customer. There are three kinds of marketing attributes of which we want to display the value:
- Z_QUADRANT
- Z_SOW
- Z_WALLET
If I use the function module as a data service in Visual Composer and use a standard table view as ouput, we get these kind of output:
Atnam - Atwrt - Atflv - Atzhl (<-- these are the column labels)
Z_QUADRANT - 4 - 0 - 0
Z_SOW - 0 - 5 - 0
Z_WALLET - 0 - 75.000 - 0
I just want to display the data as follows:
QUADRANT: 4
SOW: 5%
WALLET: 75.000
So I need to hide the obsolete fields and values and just need to display the relevant values. How can I achieve this? I was guessing I needed to implement some sort of conditional formula like "IF atnam = Z_QUADRANT, display Atwrt(value)" or something, but I am terrible at these kind of things. Can somebody explain it to me or point in the right direction of some good documentation or guide on this? Thanks in advance!
Best regards,
Jan Laros

I now chose to use a form which uses the output from the tables. This is the table I use as input for the form:
http://tweakers.net/ext/f/DWmYaePz4gdzVhwMJ3naA5UQ/full.jpg
I use the following formula for the quadrant:
IF(@ATNAM=="EU_BP_NPS_QUADRANT",@ATWRT,"0")
This returns a value of "4" which is correct.
For SOW I use the following formula:
IF(@ATNAM=="EU_BP_NPS_SOW",@ATFLV,"WRONG")
Strangely enough the return value is "WRONG" in the form. What am I missing here?
Regards,
Jan

Help need to display record in same line

Hi all,
Correct output is not coming.
Movement type u2018261u2019 is material of type raw material.
Movement type u2018101u2019 is material of type finished prodcut.
I need to display finished product material details & beside that raw materials in the same line .
Help me in this regard . I am watching this thread.
DATA : BEGIN OF i_final OCCURS 0,
          aufnr LIKE afko-aufnr,
          gstrp LIKE afko-gstrp,
          gltrp LIKE afko-gltrp,
          mblnr LIKE mseg-mblnr,        "mat doc.no
          bwart LIKE mseg-bwart,        "movement type
          matnr LIKE mseg-matnr,
          werks LIKE mseg-werks,
          lgort LIKE mseg-lgort,
          charg LIKE mseg-charg,
          menge LIKE mseg-menge,
          meins LIKE mseg-meins,
       END OF i_final.
DATA : BEGIN OF i_final2 OCCURS 0,
          aufnr LIKE afko-aufnr,
          gstrp LIKE afko-gstrp,
          gltrp LIKE afko-gltrp,
          mblnr LIKE mseg-mblnr,        "mat doc.no
          bwart LIKE mseg-bwart,        "movement type
          matnr LIKE mseg-matnr,
          werks LIKE mseg-werks,
          lgort LIKE mseg-lgort,
          charg LIKE mseg-charg,
          menge LIKE mseg-menge,
          meins LIKE mseg-meins,
          mqty1 LIKE mseg-menge,        "MILD STEEL SCRAP
          mqty2 LIKE mseg-menge,        "PIG IRON
          mqty3 LIKE mseg-menge,        "FOUNDRY RETURN NORMAL
          mqty4 LIKE mseg-menge,        "CALCINED PETROLEUM COK
          mqty5 LIKE mseg-menge,        "FERRO SILICON
          mqty6 LIKE mseg-menge,        "FERRO MANGANESE
          mqty7 LIKE mseg-menge,        "COPPER SCRAP
          prueflos LIKE qals-prueflos,            "inspection lot number
          merknr LIKE qamr-merknr,                "inspection characteristic no
          kurztext LIKE qamv-kurztext,            "short text of characteristic
          qc_c LIKE qamr-original_input,
          qc_mn LIKE qamr-original_input,
          qc_ni LIKE qamr-original_input,
       END OF i_final2.
DATA : BEGIN OF i_final3 OCCURS 0,
           aufnr LIKE afko-aufnr,
           gstrp LIKE afko-gstrp,
           gltrp LIKE afko-gltrp,
           mblnr LIKE mseg-mblnr,        "mat doc.no
           bwart LIKE mseg-bwart,        "movement type
           matnr LIKE mseg-matnr,
           werks LIKE mseg-werks,
           lgort LIKE mseg-lgort,
           charg LIKE mseg-charg,
           menge LIKE mseg-menge,
           meins LIKE mseg-meins,
           mqty1 LIKE mseg-menge,        "MILD STEEL SCRAP
           mqty2 LIKE mseg-menge,        "PIG IRON
           mqty3 LIKE mseg-menge,        "FOUNDRY RETURN NORMAL
           mqty4 LIKE mseg-menge,        "CALCINED PETROLEUM COK
           mqty5 LIKE mseg-menge,        "FERRO SILICON
           mqty6 LIKE mseg-menge,        "FERRO MANGANESE
           mqty7 LIKE mseg-menge,        "COPPER SCRAP
           prueflos LIKE qals-prueflos,            "inspection lot number
           merknr LIKE qamr-merknr,                "inspection characteristic no
           kurztext LIKE qamv-kurztext,            "short text of characteristic
           qc_c LIKE qamr-original_input,
           qc_mn LIKE qamr-original_input,
           qc_ni LIKE qamr-original_input,
        END OF i_final3.
DATA : indx TYPE i,
       indx2 TYPE i.
LOOP AT i_final.
    i_final2-aufnr = i_final-aufnr.
    i_final2-gstrp = i_final-gstrp.
    i_final2-gltrp = i_final-gltrp.
    i_final2-mblnr = i_final-mblnr.
    i_final2-bwart = i_final-bwart.
    i_final2-matnr = i_final-matnr.
    i_final2-werks = i_final-werks.
    i_final2-lgort = i_final-lgort.
    i_final2-charg = i_final-charg.
    i_final2-menge = i_final-menge.
    i_final2-meins = i_final-meins.
    APPEND i_final2.
    CLEAR i_final2.
ENDLOOP.
LOOP AT i_final2.
    indx = sy-tabix.
    IF i_final2-bwart = '261'.
      LOOP AT i_final WHERE aufnr = i_final2-aufnr.
     IF sy-subrc EQ 0.
        IF i_final2-matnr = 'MSCRAP'.
          i_final2-mqty1 = i_final-menge.
        ELSEIF i_final2-matnr = '100072'.    "PIG IRON
          i_final2-mqty2 = i_final-menge.
        ELSEIF i_final2-matnr = 'RETFDYNORM'. "FOUNDRY RETURN NORMAL
          i_final2-mqty3 = i_final-menge.
        ELSEIF i_final2-matnr = '100062'.      "CALCINED PETROLEUM COK
          i_final2-mqty4 = i_final-menge.
        ELSEIF i_final2-matnr = '100063'.      "FERRO SILICON
          i_final2-mqty5 =   i_final-menge.
        ELSEIF i_final2-matnr = '100065'.      "FERRO MANGANESE
          i_final2-mqty6 = i_final-menge.
        ELSEIF i_final2-matnr = '100070'.
          i_final2-mqty7 = i_final-menge.
        ENDIF.
      ENDLOOP.
     ENDIF.
    ENDIF.
    READ TABLE i_qals WITH KEY aufnr = i_final2-aufnr.
    IF sy-subrc EQ 0.
      i_final2-prueflos = i_qals-prueflos.
    ENDIF.
    IF i_final2-bwart = '101'.
      LOOP AT i_results WHERE prueflos = i_final2-prueflos.
     IF sy-subrc EQ 0.
        i_final2-merknr = i_results-merknr.
        i_final2-kurztext = i_results-kurztext.
        IF i_final2-kurztext = 'C'.
          i_final2-qc_c = i_results-original_input.
        ELSEIF i_final2-kurztext = 'Mn'.
          i_final2-qc_mn = i_results-original_input.
        ELSEIF i_final2-kurztext = 'Ni'.
          i_final2-qc_ni = i_results-original_input.
        ENDIF.
      ENDLOOP.
    ENDIF.
    MODIFY i_final2 INDEX indx.
   ENDIF.
ENDIF.
ENDLOOP..
LOOP AT i_final2.
    i_final3-aufnr = i_final2-aufnr.
    i_final3-gstrp = i_final2-gstrp.
    i_final3-gltrp = i_final2-gltrp.
    i_final3-mblnr = i_final2-mblnr.
    i_final3-bwart = i_final2-bwart.
    i_final3-matnr = i_final2-matnr.
    i_final3-werks = i_final2-werks.
    i_final3-lgort = i_final2-lgort.
    i_final3-charg = i_final2-charg.
    i_final3-menge = i_final2-menge.
    i_final3-meins = i_final2-meins.
    i_final3-prueflos = i_final2-prueflos.       "inspection lot number
    i_final3-merknr = i_final2-merknr.                "inspection characteristic no
    i_final3-kurztext = i_final2-kurztext.            "short text of characteristic
    i_final3-qc_c = i_final2-qc_c.
    i_final3-qc_mn = i_final2-qc_mn.
    i_final3-qc_ni = i_final2-qc_ni.
    APPEND i_final3.
    CLEAR i_final3.
ENDLOOP.
LOOP AT i_final3 WHERE bwart = '101'..
    indx2 = sy-tabix.
    LOOP AT i_final2 WHERE aufnr = i_final3-aufnr AND
                           bwart = '261'.
      IF i_final3-bwart = '101'.
        i_final3-mqty1 = i_final2-mqty1.
        i_final3-mqty2 = i_final2-mqty2.
        i_final3-mqty3 = i_final2-mqty3.
        i_final3-mqty4 = i_final2-mqty4.
        i_final3-mqty5 = i_final2-mqty5.
        i_final3-mqty6 = i_final2-mqty6.
        i_final3-mqty7 = i_final2-mqty7.
      ENDIF.
    ENDLOOP.
    MODIFY i_final3 INDEX indx2.
ENDLOOP.
I am displaying i_final3 with alv
Edited by: uday madhav chebrolu on May 20, 2008 3:22 PM

863765 wrote:
Is there any jsp code to display in same page rather than using ajaxJSPs are on the server, so any "JSP code" will be executed on the server.
The client has HTML and javascript. The only way to not have the client move to a new page is to use something like Ajax.

Help needed to display character vaiable in currency format

Hi Friends
In a SAP Script I am passing a currency field to the subroutine as an i/p parameter and since it gets converted to character format in subroutine because of 'itcsy' , ihave deleted the trailing zeroes and decimal points from the field and performed calculations on the field, now i need to pass this char field back to SAP script but i need to display that field in currency format with commas and decimal points in the script...how do i do that???
Thanks
Vishal.

Hi Vishal,
When you pass the currency amount into the perform, no need to remove the trailing zeros and the decimal point.
Only thing you need to remove is the comma seperator as it gives a runtime error during calculation.
To convert it back to the format with comma, write the below command:
WRITE v_Item_total currency '2' to v_item_char.
CONDENSE v_item_char.
Here v_item_total is a number which is converted to comma seperated number and passed to char variable.
This char variable is then passed to the SCRIPT.
regards,
Gaurav.

Pushing default values to display on IPC view of CRM UI 2007

Anyone knows how to make pre-selected parameter values of product configuration for the opportunity line item to be displayed immediately after rendering the corresponding IPC view in the CRM web UI 2007?
Even the users pre-select values for some parameters, the IPC page shows all individual parameter fields as initial (i.e. blank) with drop-downs. The users hate to do another selection for 2nd time in a row.
Is it something we can achieve in ABAP or it's a Java development?
We have tried to use BADI CRM_CONFIG_BADI (method SET_VALUES), we've tried to do CRM_ORDER_MAINTAIN or IPC_CREATE_CONFIG and/or IPC_CHANGE_CONFIG. Nothing seemed to be working at all.
I presume, I've got to look on the Java side. Do any of you, IPC technical gurus have suggestions?
Thank you

Hi,
The IPC screen in web UI in crm 2007 is not BSP/ABAP. It is a Java/JSP based IPC screen. As webUI runs on both ABAP and Java stack, the same IPC screen that you see in SAP GUI is also rendered in webUI views.
You would need a IPC consultant/expert to do the defaulting for you.
Hope it helps!
Sudipta.

CRM Product Masterial Purchasing View in CRM 2007

I was told in CRM 2007 product master data there is purchasing view available and with plant information. My understanding is only Sales View of MM in ECC gets download into CRM. Am I missing something here? Anyone can give some input on this issue or clarification?
Thanks

Hi,
sometimes solutions appear so fast :-).
To fix this problem you just have to understand the help documentation. That was my problem to. What do sap mean by
TYPE caller
TYPENAME crmproductsimulation
PARNAME scenario.xcm
VALUE <b>my_crmproductsimulation (name of the customer's application configuration)</b>
In the xcm configuration http://<WAS IP>:50100/ipc/admin/xcm/configTreeSelect.do you have to create a customer application. Thats it and then you have to link it over crm_ipc_prop.
Howto: go to the xcm configuration. Go into EDIT mode.Select application configurations. Then select crmproductsimulation or crmordermaintain. Then add a name for the 'Create customer application configuration based on this SAP application configuration'. I suggest naming conventions e.g. ordermaintain for crmordermaintain and productsimulation for crmproductsimulation.
Afterwards choose the right systemconnection for parameter jcodata.
Then maintain comm_ipc_prop and use this name as value for the above mentioned parameter (scenario.xcm).
Thats all.....
I Think that will shurly solve you problem. By questions just contact [email protected]
Wish a lot fun with configuration in CRM
Yours Mark

How to get a Custom View in CRM 2007

Hi,
I have created a new view (SrvTLocation) and I want to replace Service Level Agreements view with the SrvTLocation.
In the old version, I followed this approach to get the location view
1. Add SrvTLocation to the SrvTViewSet under the view area "SrvTActionSLA".
2. Redefine the method "DO_REPLACE_INITIAL_VIEW" of the controller class of "SrvTViewSet", so that it will replace the "SrvTSLA" with "SrvTLocation"
I dont know how to do it in the new system.
Please advice me. I will reward points.
Sreekanth

Hi Sreekanth
Have you checked the new CRM 2007 Cookbook.
I believe it's available from SAP Marketplace. Haven't checked myself but do believe it's there.
Regards
Arden
Reward with points if helpful

How to get the customer fields view in CRM 2007?

HI Experts,
There is a tab in CRM 4.0 for customer fields(Generated using EEWB).
My question is how can we get these fields into WEB UI?
I didn't find the Component BTCUSTOMER_H in CRM 2007.
What might be the reason behind it?
Please share your views.
Thanks,
Adi.

Adi,
You actually got pointed to the wrong blog that I wrote. However if you read the following blog, it will show you how to do what you want to do:
/people/stephen.johannes/blog/2008/01/25/crm-40-to-52-customerh-fields
If you want to cheat, then apply latest support stack for CRM 2007 and the fields will be there. The section 1.13.5 in the SP02 release notes explains that the nodes are now available in CRM 2007 SP02.
Look at this thread on how to view the release notes:
SAP CRM 2007 SP02: DOCUMENTATION RELEASED
If you have any further questiosn let me know.
Take care,
Stephen

Grus help needed in finding the queries with Cartesian joins

Hi
I have a reporting tool in which users are allowed to put the joins on the views and add some sub queries that produces a Cartesian product. Is there any tool or way that I can stop the execution of those query before it is being executed for example
Step 1 ) user creates a query
step2 ) user submits it
step 3) by any tool or any check if Cartesian join is found the query execution is stopped and notify the user that the query is not good if no problem executes the query.
I really need help in step 3. I am on 9i release2.
Any help or suggestions will be highly appreciated.

I Agree with Gasparotto, you should limit the resource consume.
You must understand that cartesian join, isn´t always a BAD guy, sometimes you need it.
If your developers are in trouble with handle the join , think about NATURAL JOIN, may be it helps you
Regards
Helio Dias

Help neede with UITableview and detail views

OK. So I'm new to iPhone dev and have been trying to figure this out with no luck.
I have a xib and coresponding ProfileViewController file that contains a tableview. The tableview is pulling data from a .txt file. This is working. However, what I'd like to be able to do is when a user selects one of the tableview rows, it pulls a different xib file, under the nav controller.
For instance:
Item 1 displays person.xib
Item 2 displays animal.xib
etc.
I am also using a tab view controller and a navigation controller. The tab views and nav controller work fine.
If anyone could help with some instructions/code, I would greatly appreciate it.
Thanks,
Doug

Hi Doug - Do you just want each row of your table view to switch to a different detail view when selected? That's a fairly standard setup, so maybe you're trying to describe something else I'm not seeing yet.
Let's start with the standard structure anyway. Then you can explain what you want that's different, ok?
Have you looked over the UICatalog sample app yet? The main view of that app presents a table view under a nav bar. Selecting any row in the table view will slide the detail view matching that row under the nav bar. Each detail view is controlled by a different subclass of UiViewController.
The UICatalog sample is a bit more complicated than we might want for learning the basic structure, but I think it's clear enough for you to see the key steps. Here's one of the methods you might want to look at:
// MainViewController.m
// the table's selection has changed, switch to that item's UIViewController
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
UIViewController *targetViewController = [[menuList objectAtIndex: indexPath.row] objectForKey:@"viewController"];
[[self navigationController] pushViewController:targetViewController animated:YES];
The above is deceptively simple because lots of work has gone into building the menuList array, which is an array of NSDictionary objects, each containing all the info needed to bring up one detail view. However with a little study, you may find most of the answers to your questions in that file.
Note that while the view controllers in the menuList array are created with code in awakeFromNib, they could just as easily have been pulled out of separate xib files.
If you''d like a really well paced, crystal clear explanation of how to use nav bars with table views, I would recommend Chapter 8 and 9 of +Beginning iPhone Development+ by Mark and LaMarche. I think you may be right at the point where you'll benefit from that book the most.
Hope that helps!

Help needed finding display port (NOT mini) to VGA adapter please!

I bought a macbook in 2009 and urgently need a VGA adapter (female) but I don't have a mini display port! Help! I can't seem to find an adapters that suit macbooks before the mini dislay port was brought out.
Thanks
Kirsten

Welcome to Apple Support Community.
If you have an earlier MacBook 2006-early 2009, it has a mini-DVI port.
http://store.apple.com/us/product/M9320G/A/apple-mini-dvi-to-vga-adapter
Search for 'mini DVI to VGA adapter' online, and you will find many sources for an adapter compatible with your MacBook.

Help needed in query for Materialized View

Hi,
I want to create a materialized view which has some precalcultaed values.
I have four dimension tables out of which one is a Time Dimension table with levels as Year->Quarter->Month.
The precalculations are the moving averages and cummulative values of Sales Amt on the dimension values over a period of 4 Months.
The dimension tables are Clients, Products, Channel, Time.
Fact Table is Sales_Fact which will have the sales amount for different members of the dimension.
Since my fact table is very huge, i want to create a materialized view where i could store the required calculated measures, here Moving Average of Sales Amt for each Client, Product, Channel dimensions over a period of 4 Months.
Can anybody help with writing the query for this..Any help in this regard will be appreciated..
Please give me suggestions for this..

Check this link.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/aggreg.htm#sthref1612
Regards
Raj

Help needed in displaying BI Queries, Views in CRM 2007

Similar Messages

Maybe you are looking for