Help needed in editing a contract

Hi All,
I am using the BAPI "BAPI_CUSTOMERCONTRACT_CHANGE" to edit the contract.
In tables parameter, we have PARTNERS,PARTNERADDRESSES, CONTRACTKEYS,EXTENSIONIN, CONTRACT_TEXT without checkbox structures. In that case how can we update the corresoonding fields in the structure.
Thanks in advance.
Regards,
Udaya.
All helpful answers will be rewarded.

The Child Text parameter is the one you are searching for. It accepts a 1D string array for the following columns.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

Slice tool help needed width expands and contracts

I recently did a header for my website and srinks and expands
with different screen sizes I need a bit of help to undstand how
and why this happens.
I built it on a 19" screen fits perfectly on the page. Then
on the 15" I'm using now its very small leaving gaps along the
sides
here's the problem

No, I don't mean that your header should be all one image.
Currently, your header is a table with a number of images
inside it. The width of the table is "absolute." It is set to a
fixed number of pixels (800). It won't change. What you see as
smaller and larger on your different monitors is a result of the
different resolution that the two monitors have.
The forum content, on the other hand, is in tables with
widths that are "relative." They are are a percentage of the width
of the browser window (81%). These tables will change size
depending on the size of the browser window. For just one perfect
setting, everything will line up. For all other widths, you have a
mess.
You need your header table and your forum tables to match.
Either your header needs to be designed differently, so that it can
expand and contract gracefully when a browser window is a different
size (in pixels), or you need to edit your forum so that the
various parts are all 800 pixels wide instead of varying
percentages.
As for monitors, it isn't the physical size that is important
here, it's resolution. It isn't the number of inches, it's the
number of pixels. You can have a 21" monitor that's set to 800x600
pixels and you can have a 17" monitor set to 1600x1200 pixels. On a
monitor with 800x600 pixel resolution, your header will be the full
width of the screen and the forum content will be about 650 pixels,
indented on both sides. On a monitor that is 1600x1200 pixel
resolution, your header will be about half of the screen width and
your forum content will be about 1300 pixels wide.

I am a member of Adobe Send Now I need to edit a contract I designed here but it won't let me change anything on the Contract.

I am a member of Send Now and have several PDF files for small Dog Rescue.
I need to change several things on the forms but it won't let me make changes.
It tells me to pay for this & I am paid up till 2017 on the Adobe Send Now?
Help I don't want to rewrite the whole contract to change a few simple things.

Hi Lana Gahagan,
Adobe Send is a service used for sending large files. It does not provide you with the facility to edit or create PDF. Also, as suggested earlier in the thread, using Acrobat you can edit the PDF.
Thanks,
Vikrantt Singh

Help needed for editable alv grid program

hi,
Can you please tell me how to set a update button in application toolbar of alv griv without suppressing it and how to write the code for that update button so that if I change my editable column data and press the update button my updated data should be stored in my database table.
the code what i wrote is:
TABLES: vbak,vbap.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_final,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
matnr LIKE vbap-matnr,
posnr LIKE vbap-posnr,
END OF t_final.
DATA: i_final TYPE STANDARD TABLE OF t_final INITIAL SIZE 0,
wa_final TYPE t_final.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
     Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname = 'VBELN'.
fieldcatalog-seltext_m = 'sales order'.
fieldcatalog-col_pos = 0.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'ERDAT'.
fieldcatalog-seltext_m = 'date'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'material no.'.
fieldcatalog-col_pos = 2.
fieldcatalog-edit = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'POSNR'.
fieldcatalog-seltext_m = 'line item no.'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
     Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
     gd_layout-totals_only = 'X'.
     gd_layout-f2code = 'DISP'. "Sets fcode for when double
     "click(press f2)
     gd_layout-zebra = 'X'.
     gd_layout-group_change_edit = 'X'.
     gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
     Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
     i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
     it_special_groups = gd_tabgroup
     IT_EVENTS = GT_XEVENTS
i_save = 'X'
     is_variant = z_template
TABLES
t_outtab = i_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
     WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
     Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT avbeln aerdat bmatnr bposnr FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INTO TABLE i_final WHERE avbeln = bvbeln.
     ENDFORM. " DATA_RETRIEVAL
thanks in advance.

hi sudhir,
thanks for ur reply.
after seeing the code u send to me i made changes to my program.but still when i click on update button,nothing is happening.can u please suggest me an idea.
TABLES: vbak,vbap.
TYPE-POOLS: slis.                                 "ALV Declarations
TYPES: BEGIN OF t_final,
     vbeln LIKE vbak-vbeln,
     erdat LIKE vbak-erdat,
     matnr LIKE vbap-matnr,
     posnr LIKE vbap-posnr,
     END OF t_final.
DATA: i_final TYPE STANDARD TABLE OF t_final WITH HEADER LINE,
      wa_final TYPE t_final.
*DATA:i_final LIKE vbap OCCURS 0.
*DATA:wa_final LIKE vbap.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      gd_tab_group TYPE slis_t_sp_group_alv,
      gd_layout    TYPE slis_layout_alv,
      gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname   = 'VBELN'.
fieldcatalog-seltext_m   = 'sales order'.
fieldcatalog-col_pos     = 0.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'ERDAT'.
fieldcatalog-seltext_m   = 'date'.
fieldcatalog-col_pos     = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'material no.'.
fieldcatalog-col_pos     = 2.
fieldcatalog-edit        = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'POSNR'.
fieldcatalog-seltext_m   = 'line item no.'.
fieldcatalog-col_pos     = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-totals_only        = 'X'.
gd_layout-f2code            = 'DISP'. "Sets fcode for when double
                                        "click(press f2)
gd_layout-zebra             = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text       = 'helllllo'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program      = gd_repid
           i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
            i_callback_user_command = 'USER_COMMAND'
            i_callback_pf_status_set = 'GUI_STAT'
           i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
           it_special_groups       = gd_tabgroup
           it_events                = it_events
            i_save                  = 'X'
           is_variant              = z_template
       TABLES
            t_outtab                = i_final
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT avbeln aerdat bmatnr bposnr FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INTO TABLE i_final WHERE avbeln = bvbeln.
ENDFORM.                    " DATA_RETRIEVAL
      FORM GUI_STAT                                                 *
--> RT_EXTAB                                                      *
FORM gui_stat USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'UPDATE' EXCLUDING rt_extab.
ENDFORM.
      FORM USER_COMMAND                                             *
--> U_COMM                                                        *
--> RS_SELFIELD                                                   *
FORM user_command USING u_comm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
DATA:selfield TYPE slis_selfield.
CASE u_comm.
    WHEN 'UPDATE'.
      LOOP AT i_final ."into wa_final.
        i_final-matnr = vbap-matnr.
        update (vbap) from table i_final.
        IF sy-subrc = 0.
          MESSAGE s000(0) WITH 'records updated successfully'.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.

Help needed for edit images

Could you please do me a favor for giving a Christmas gift to my young daughter.
She is just 1 year old and I would like to insert her face into Christmas puppa's photo.So she will look
like Christmas puppa's,I will give you both photos.If you can help me that will be great..

Hello there!
There are several links for you to accomplish what you want to do as long as you just review them beforehand.
You can learn the basics at AdobeTV
Please post back if you have any questions in completing your task
janelle

I need help with Cool Edit 2000

I need help with Cool Edit 2000. Can someone help me?

Message edited by moderator: maybe don't publicly post your serial?
Quite! Never a good idea, even with really old software...
jackm36094786 wrote:
Steve: What I have is a Serial # (?) xxx ID # 105368761 and a case # 3009176.I also have the program on my Gateway computer but I don't know how to use it. Is this of any assistance?
The program software should install fine (others report using it successfully) but the difficulty has always been registering it. To do this you need to find a program (that often people discard, unfortunately) called ce2kreg.exe and run that. That's where you enter your registration details, and how you get rid of all the noises that CE2000 will put all over your audio otherwise (unless you severely restrict the facilities you can use).
It used to be the case that if you'd lost the registration program but had the serial numbers, that Adobe would send you a copy of ce2kreg.exe, but somehow I doubt that they'd be willing to do this any more - it was a long time ago now, after all.

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed in writing SQL CASE or DECODE statement

Hi experts,
I need to write a SQL to select order_num, cntry_cde, prod_id and Qty by joining order_num on PROD_ORDER and PROD_ORDER_TXT.
Here is my sample data
PRODORDER_
order_num     cntry_cde     Prod_id     Qty
100     US     A1     5
101     US     A2     10
102     AU     A3     4
103     AU     A4     9
104     IN     A5     3
PRODORDER_TXT_
order_num     cntry_cde     Prod_id
100     US     A1
101     US     A2
102     NZ     A3
103     AU     A4
104          A5
Here is the requirement,
1) If the cntry_cde in PROD_ORDER is same as cntry_cde in PROD_ORDER_TXT then select PROD_ORDER.cntry_cde (orders 100, 101, 103)
2) If they are different, pick the country code from PROD_ORDER_TXT (order 102, AU <> NZ)
3) If they are different and PROD_ORDER_TXT.cntry_cde is NULL, I cannot use it as cntry_cde in my report (order 104). It happenend just because of the bad data at source.
I cannot avoid it. Then simply use the cntry_cde from PROD_ORDER
Output expected
100     US     A1     5
101     US     A2     10
102     NZ     A3     4 -- AU changed to NZ
103     AU     A4     9
104     IN     A5     3 -- IN retained as PROD_ORDER_TXT.cntry_cde is null
sample table creation and insert statements are below
create table prod_order
(order_num number,
cntry_cde CHAR(2),
prod_id VARCHAR2(6),
qty number)
create table prod_order_txt
(order_num number,
cntry_cde CHAR(2),
prod_id VARCHAR2(6))
insert into prod_order values (100, 'US', 'A1',5);
insert into prod_order values (101, 'US', 'A2',1);
insert into prod_order values (102, 'AU', 'A3',4);
insert into prod_order values (103, 'AU', 'A4',9);
insert into prod_order values (104, 'IN', 'A5',3);
insert into prod_order_txt values (100,'US','A1');
insert into prod_order_txt values (101,'US','A2');
insert into prod_order_txt values (102,'NZ','A3');
insert into prod_order_txt values (103,'AU','A4');
insert into prod_order_txt values (104,NULL,'A5');
commit;
Thanks for your help in advance
Edited by: sarvan on Mar 28, 2012 1:39 PM

Hello
Thank you for posting all of the ddl and test data along with your expected output - very helpful!. One small point would be to remember to type {noformat}{noformat} before and after any section of code or data in your post so that formatting is retained. Anyway, this should be a simple join and a combination of CASE and NVL...Select
po.order_num,
CASE
WHEN po.cntry_cde != NVL(pot.cntry_cde,po.cntry_cde)
THEN
pot.cntry_cde
ELSE
po.cntry_cde
END cntry_code,
po.prod_id,
po.qty
FROM
prod_order po
JOIN
prod_order_txt pot
ON
( po.order_num = pot.order_num
ORDER_NUM CN PROD_I QTY
100 US A1 5
101 US A2 1
102 NZ A3 4
103 AU A4 9
104 IN A5 3
5 rows selected.
HTH
David
Edited by: Bravid on Mar 28, 2012 8:32 AM
corrected !=

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed in Finding Download location for Sun One Portal 7

Hi,
help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
Please share the link for download location.
I am totally new in Sun ONE Portal.
Thanks,
Edited by: 945439 on Oct 5, 2012 3:41 AM

try edelivery.oracle.com under sun products.

Help needed with Vista 64 Ultimate

"Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
-The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
once I set this to enabled Dolby and DTS went acti've.
I also have a question on 5. and Vista 64
-When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
How do I make 5. render properly on vista

We ended up getting iTunes cleanly uninstalled and were able to re-install without issue. All is now mostly well.
Peace...

Help needed while exporting crystal reports to HTML file format using java

Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanks

the ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM

Help needed in PS module on CJ9ECP/CJ20N for revaluating CCR??

help needed in PS module on CJ9ECP/CJ20N for revaluating CCR??
How to handle method on_costing_component_to_outtab which belongs to badi gui_itemization_ck. This is to revaluate CCR in CJ20N.
From sale transaction(va01/va02) i need to call cj20n/cj9ecp for revaluating cost estimates. Can anyone say how to proceed with this thing.
Can any one say how to handle pop up window in CJ20N/CJ9ECP when clicked edit ecp button. Later how to revaluate cost estimates. For this should i need to go for call transaction or is there any method available. If so how to handle method for revaluating cost estimates for ECP of WBS elements

Thanks Amol for the advice.
My friend doesn't belong to an engineering background and had not worked in a manufacturing environment.
He holds an MBA degree specialised in systems and has worked in software companies supporting software projects and the functions(like HR,Procurement in the same setup) as a software quality guy.
Moreover the modules mentioned by you requires engineering background with manufacturing exposure.
He had enquired for the course at siemens and they said that he may not be suitable for any of the modules offered by them as per the above reasons.They also mentioned that they have to check with SAP Labs for expert opinion.
Please provide your inputs.
regards,
Zubair.

Help needed

Help needed
1. When we use USING clause in execute immediate does it hard parse ?
2. Is it better to use values stored in SYS_CONTEXT or to use USING clause in Execute Immediate ?
3. In Dynamic SQL, if i use SYS_CONTEXT does it Hard Parse or Soft Parse ?
Edited by: Prathamesh on Jun 22, 2010 5:19 AM

Prathamesh wrote:
1. When we use USING clause in execute immediate does it hard parse ?Only the first time.
2. Is it better to use values stored in SYS_CONTEXT or to use USING clause in Execute Immediate ?I think it depends, Tom would say the latter
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1669972300346534908
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1288401763279

Help needed in editing a contract

Similar Messages

Maybe you are looking for