Organizer data base is damaged in acrobat 9 standard

I have tried to "repair" and reinstall my Adobe Acrobat 9 standard version to correct my organizer data base damage issue. I have deleted and replace the organizer90 file as suggested in previous discussions to no avail. I have created a txt version and removed the .txt to the folder making it blank also. Nothing has fixed this issue. I have had this product for years without many issues. This is the first time it appears to be unresolvable.
Do you have any suggestions beyond what I have discussed. As an example is there a specific order of action items to make the repairs. It is perplexing that a full uninstall and then a full reinstall has not solved the issue. I am only an occasional user so this product suits my needs and demands regarding pdf files. posted 070514 Scott

you must not be removing the correct file. double check that you're deleting from the correct directory.
also, after restarting your computer, before launching acrobat, make sure that organizer90 is not present. then launch acrobat and check that it re-creates the organizer90 file.
and, if that fails, you could try holding down shift-ctrl-alt while starting acrobat. if done correctly you'll see a confirmation dialog about resetting your preferences.

Similar Messages

Evert ime i close a pdf i get the following message - rthe orgnizer data base is damaged and will be reset the next time acrobat is launched but after relaunching i still get the same message

every time i close a pdf i get the following message - the orgnizer data base is damaged and will be reset the next time acrobat is launched but after launching
i still get the same message

You must be using an old version of Acrobat as Organizer hasn't been in the last two versions of Acrobat. Here is the KB that covers that old error: Error "The Organizer Database is damaged and will be reset..." | Acrobat 9

Will PSE3 Organizer data base transfer intact to LR

Believe it or not I like the data base in PSE3. As a matter of fact I keep PSE3 on my computer just for this. I generally back up my images to a DVD, while keeping the originals on an external drive. I then upload from the DVD to PSE3 which creates thumbs of the originals. The tag system in PSE3 allows me to tag the thumbs with categories, explicit names, dates, etc. which I can search for in any method I wish later. Being able to view thumbs of images greatly assist me in locating the image I want.
I know many of you are using much more sophisticated software, but I have over 8,000 thumbs of images tagged in PSE3. I would not like to have to go back and re tag all those images.
Question is will LR allow me to import the current PSE3 file structure and continue using the same system, and view the thumbs as always? If it does, I will get LR while the discount is in place.

Hello all:
Same question for PSE5, will LR1 receive all data from edited and tagged, ranked files. I have to make a decision about moving my db to LR. I did participate in the betas, but noticed that the bets didn't have a way to back up a group of photos (shoot or collection), with all their tags, keywords, rankings, proxy viewing files, and all the file edits, whether NEF, PSD, TIFF, or JPG, (since files are edited non-destructively). My question is for non layered edits only.
(big hole in design)
I think the biggest shortcoming of a front end (library/organizer) is backing up, with choices as to what to grab (tags, keywords, rankings, proxy viewing files, and all the file edits) and marking the files or folder or shoot/collection as having been backed up and what date. I find myself looking at a folder in Windows and having to go through 4 notebooks of discs, to remind myself if I had backed the files up and what the date was. Even so, it is very difficult to decide which (new edited) files have been created/changed and not yet backed up. My workaround (at the folder level only) was to place a 00BackedUp.txt file, with the backup date, at the beginning of the folder, which still doesn't immediately tell you whether a version of a picture had been backed up, without doing some analysis.
Backing up the library (DB) is great, but for me, its about 18 DVD's (Professional + Personal Catalogs). I don't even know if lib backups grab all the above mentioned pieces.

I receive an error message every time I close a file "The Organizer base is damaged and will reset the next time Acrobat is launched." But it never fixes itself. What's the fix?

I receive an error message every time I close a file "The Organizer base is damaged and will reset the next time Acrobat is launched." But it never fixes itself. What's the fix?

Hi mjsa1,
Please see Error "The Organizer Database is damaged and will be reset..." | Acrobat 9.
If you're still having trouble, please let us know!
Best,
Sara

Entourage error message 4362 - damaged data base - cannot back up , compact

I've been using 10.5.8 on my G5 for 2 yrs NO problems - THEN - error message 4362 starts to appear as Entourage (2004 Office) gets close to 1.5G bytes. Disk utility can run and verify YES there is a damage in data base.
BUT the rebuild option will NOT last more than 30secs before I/O error.
I have tried to open Entourage with option key down and I have thrown out any email older than 1yr.
Next move is to re-install Entourage - and import folders - unless some one has a better idea/solution. Please -- Ray

Hi Ray,
http://www.entourage.mvps.org/error/number.html#error4362
See if the above helps before you remove and then re-install MS Office.
Da Vinci

Data base in microsoft office is damaged andI can't rebuild it. suggestions?

Hi
The data base for Microsoft Office 2008 has been damaged. I've tried twice to rebuild the data base, but it stalls after 2 hours and I'm forced to cancel. Very frustrating. The Office tools is a nice tool, but it's not working. I can use Word, Excel and PP but Entourage will not open at all. I've removed office and reinstalled and downloaded all of the updates. I still get the same message. If I have to start over, so be it, but I'm not sure how to completely remove Office. I removed it using Microsoft tools. (Positive reinforcement that I will always use Macs!) Any suggestions will be most appreciated.
Thanks,
Momo3

use time machine (if you have it on before all the errors in office) to restore the working files. if not you can use cleanmymac to remove all microsoft office program files and then reinstall office. Back up all your data before useing cleanmymac. it is a good app but it can clean too much some times if you do use clean my mac, open clean my mac click applications tab drag office apps from finder>applications not the dock and microsoft update as well. then click remove. it will remove all files that go with office (It wont remove Your document files) her is a link to a free trial of clean my mac http://macpaw.com/cleanmymac

Standard Documentation for Add-on and Add-on's Data Base?

Hi!
I'd like to know if there is a stantard to create documentation for Add-On and Add-On's Data Base to get the Add-On's Certification.
Thanks!
William

> When applying add-on images to our base the primary MSI's install just
> fine but none of the MST's and MSP's do not apply.
I meant to say that none of the MST's and MSP's apply. Sorry about that.

Agent Determination Organizational Data

Hi Experts,
Good Day!
I would like to ask some help regarding a workflow the problem is the "user received the workitem however user claimed that he is not supposed to receive" that is why i would like to know who are the agents dedicated for these tasks. we are able to find the step it is a user decision where the agent is the Rule "0090010" for purchasing group. In transaction PFAC we entered the rule "0090010" the information regarding the rule below:
Transaction: PFAC
Rule Display:
      Basic data:
               Abbr: Purch. group
               Name: Purchasing Group
Rule Definition:
      Category: Agent Determination: Organizational Data
      OrgObj type: T024
We would like to know:
1. How does it determine the Agent who is supposed to receive mail using the "Category: Agent Determination: Organizational Data"? Where can we find the agent that is configured on the workflow using the rule?
2.Is there a standard rule for agent determination: Organizational Data for this workflow?
Answer's will be a great help.
~Thank You,
Junne Ray

got it now! sorry, i am a bit dumb today.
o.k. here is what you have to check:
transaction PFOM - relationship between the purchasing group (which will be the one of the PO and therefore and object of table T024) and your organizational structure. check the relationship.
documentation:
Data basis for role resolution
For role resolution, the link between the objects of type
T024 (individual purchasing groups) and the organization
objects (position, organizational unit, ...) is evaluated.
Required settings and Customizing
The linkages between the various purchasing groups and the relevant
organizational objects must first be maintained using
transaction PFOM.
Procedure for errors
If the role resolution delivers no result, the work item for which the
role resolution was carried out is not faulty but addressed to all
possible processors (flag "abend in role resolution without result"
is not set).

How to stored data after clicking checkbox in data base table

REPORT ZT                                      .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
              smatnr FOR mseg-matnr MODIF ID m2,
              swerks FOR mard-werks MODIF ID m3,
              slgort FOR mard-lgort MODIF ID m4,
              slgpbe FOR mard-lgpbe MODIF ID m5,
              scharg FOR mseg-charg MODIF ID m6,
              sbwart FOR mseg-bwart MODIF ID m7,
              skostl FOR mseg-kostl MODIF ID m8,
              saufnr FOR mseg-aufnr MODIF ID m9,
              srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
          pse RADIOBUTTON GROUP radi,
          bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*&      Form get_data
      Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
   msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
              JOIN mkpf ON msegmblnr EQ mkpfmblnr
              WHERE mseg~matnr IN smatnr.
ENDFORM.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
     t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title   TYPE lvc_title,
       w_comm    TYPE slis_formname,
       w_status TYPE slis_formname,
       x_layout TYPE slis_layout_alv,
       t_event    TYPE slis_t_event,
       t_fieldcat TYPE slis_t_fieldcat_alv,
       t_sort     TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
       1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
       4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
       5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
       6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
       9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
   14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   i_callback_program       = V_REPID
   it_fieldcat              = t_fieldcat
   is_layout                = x_layout
   it_sort                  = t_sort
   i_callback_pf_status_set = w_status
   i_callback_user_command = w_comm
   i_save                   = 'X'
   it_events                = t_event
   i_grid_title             = w_title
TABLES
   t_outtab                 = t_data
EXCEPTIONS
   program_error            = 1
   OTHERS                   = 2.
IF sy-subrc <> 0.
   MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
     t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
       x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event   TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
     t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
     p_outputlen p_noout
     p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
     p_hotspot p_showasicon p_checkbox p_edit
     p_dosum
     t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
   wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
   wa_fieldcat-ref_tabname = p_ref_tabname.
   IF p_ref_fieldname EQ space.
     wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
   ELSE.
     wa_fieldcat-ref_fieldname =   p_ref_fieldname.
   ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
   wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
   wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
   wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
   wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
   wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
   wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
   wa_fieldcat-INPUT     = 'X'.
   wa_fieldcat-EDIT     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
     i_logo             = 'TRVPICTURE04'
   it_list_commentary = t_heading.
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
FORM user_command USING r_ucomm     LIKE sy-ucomm
     rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
   IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR.                              " U CAN DELETE
SY-MSGV2 = WA-MATNR.                              " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888'          " U CAN DELETE
        WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
   INSERT ZTABLE.
   ENDIF.
endloop.
ENDCASE.
ENDFORM.                    "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.

Hi Lakshmi,
       Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...

Hiding organization data and partner block in IC_AGENT role

Hello,
   For Business role : IC_AGENT and under Work Center : Interaction record ,we have a screen with three different blocks:
   Overview Organizational Data Partner.
   My requirement is to hide Organization Data and Partner block.
   Please suggest how can i do that?
   Regards
   Najm

Hello Najm,
for the same purpose I've done in the following way.
Enhance component ICCMP_BT_INR in BSP_WD_CMPWB if it's not been done yet.
Enhance view InrHeaderViewSet if it's not been done yet.
In view controller implementation class for this view (in my case it was ZL_ICCMP_BT_INRHEADERVIEW_IMPL) redefine GET_TAB_LINK_TABLE method in the following way:
METHOD get_tab_link_table.
CONSTANTS: c_orgdata TYPE string VALUE 'InrOrgData.BTORGSET/OrgSet',
            c_partner TYPE string VALUE 'InrPartnerId.MainWindow'.
CALL METHOD super->get_tab_link_table
   RECEIVING
     rt_result = rt_result.
* hide org. data tab
DELETE rt_result WHERE id CP c_orgdata.
* hide partners tab
DELETE rt_result WHERE id CP c_partner.
ENDMETHOD.
Other way is:
Enhance component ICCMP_BT_INR in BSP_WD_CMPWB if it's not been done yet.
Go to Runtime Repository Editor there.
Delete InrPartnerId.MainWindow and InrOrgData.BTORGSET/OrgSet views from the viewarea Header of the ICCMP_BT_INR/InrHeaderViewSet.
But personally I've preffered first one. Just to remember what was actually there in standard.

Logical data base for license revenue report.

Hi All,
My requirement is to create "license revenue report through SAP Query with following fields:
VBAK:
Sales Document,Sales Doc type,net value of sales order in document,sales org,distribution channel,division,sales office,business area,customer purchase order number,customer purchase order date,sold to party.
VBAP:
Sales document item,target quantity in sales units,target quantity in UOM,usage indicator,billing block for item,business area,plant(own or external),
origin of bill of material,net price,SD document currency,material pricing pgroup,account assignment group for this material,activity type,personnel number.
VEDA:
contracts start date,contract end date,date on which contract is assigned.,installation date,agreement acceptance date
VBREVK:
clearing account for accrued revenues,clearing accountkey(offsetting account),total accrued value,currency key,amount in document currency,posting year and posting period.
VBREVE:
revenue amount,currency key,accrual period,company code,country of destination,profit center,posting year and posting period,amount in document currency,gl account,account for deferred revenue,account for non billed receivable
Is there any standard logical data base which gives all the required fields mentioned above? since i am not SD consultant i am not sure whether i have to take only above tables exactly or not
there are certain logical databases like SD_ORDER,SD_SALES_DOCUMENT which has tables VBAK,VBAP,VEDA but i am unable to join remaining tables VBREVE and VBREVK with those logical data bases
Please provide some valuable suggestions on this.
Thanks&Regards

Hi All,
My requirement is to create "license revenue report through SAP Query with following fields:
VBAK:
Sales Document,Sales Doc type,net value of sales order in document,sales org,distribution channel,division,sales office,business area,customer purchase order number,customer purchase order date,sold to party.
VBAP:
Sales document item,target quantity in sales units,target quantity in UOM,usage indicator,billing block for item,business area,plant(own or external),
origin of bill of material,net price,SD document currency,material pricing pgroup,account assignment group for this material,activity type,personnel number.
VEDA:
contracts start date,contract end date,date on which contract is assigned.,installation date,agreement acceptance date
VBREVK:
clearing account for accrued revenues,clearing accountkey(offsetting account),total accrued value,currency key,amount in document currency,posting year and posting period.
VBREVE:
revenue amount,currency key,accrual period,company code,country of destination,profit center,posting year and posting period,amount in document currency,gl account,account for deferred revenue,account for non billed receivable
Is there any standard logical data base which gives all the required fields mentioned above? since i am not SD consultant i am not sure whether i have to take only above tables exactly or not
there are certain logical databases like SD_ORDER,SD_SALES_DOCUMENT which has tables VBAK,VBAP,VEDA but i am unable to join remaining tables VBREVE and VBREVK with those logical data bases
Please provide some valuable suggestions on this.
Thanks&Regards

How to trigger pop-up window in report and update data base from report

Hi All,
I have a requirement, in a report output list to trigger a pop up window with some rejection codes corresponding to each sales order when i select from the output list. Also i need to update data base by selecting one of the rejection code in the pop-up window list for that sales order. Can any one please let me know how to achive this.
Also, i have check boxes for each record in the output list. Also, i have added one more check box as "Select All'. When select 'Sleect All' check box , all check boxes need to be checked, how to achieve this. PLease let me know.
Thanks in advance.
Regards,
Rajesh

Hi check this code of editable ALV report... I updated the data base with the changes made..in the editable ALV
*& Report ZJAY_EDIT_ALV
REPORT zjay_edit_alv.
* TYPE-POOLS *
TYPE-POOLS: slis.
* INTERNAL TABLES/WORK AREAS/VARIABLES
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.
* FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.
* SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c DEFAULT 'MARA',
lines(5) TYPE n DEFAULT 7.
* START-OF-SELECTION *
START-OF-SELECTION.
* Storing table name
p_table = tabname.
* Create internal table dynamically with the stucture of table name
* entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.
LEAVE TO LIST-PROCESSING.
ENDIF.
* Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>.
SORT i_fieldcat BY col_pos.
* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS.
REFRESH <dyn_tab_temp>.
* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form SET_PF_STATUS
* Setting custom PF-Status
* -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'. "copy it from SALV func group standard
ENDFORM. "SET_PF_STATUS
*& Form user_command
* Handling custom function codes
* -->R_UCOMM Function code value
* -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>.
CASE r_ucomm.
* When a record is selected
WHEN '&IC1'.
* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex.
IF sy-subrc = 0.
* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.
* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
* Make all the fields input enabled except key fields
w_field-input = 'X'.
MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL.
ENDIF.
* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.
* If the record is changed then track its index no.
* and populate it in an internal table for future
* action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF.
ENDIF.
* When save button is pressed
WHEN 'SAVE'.
* Sort the index table
SORT i_index.
* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index.
LOOP AT i_index.
* Find out the changes in the internal table
* and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF.
ENDLOOP.
* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
REFRESH <dyn_tab_temp>.
* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table.
ENDIF.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command

SAP QUERY -logical data base ADA

I have created a SAP Query with logical data base ADA,I have selected four tables in it.Do i need to link these tables if yes..where and how?The report is for fields in asset master data.
.But i get below error when i try to genaret the output :
Fields from parallel tables within a line
Line: 01
Field: Asset description
(ANLT-TXT50, table ANLT)
Field: License plate no. of vehichle
(ANLZ-KFZKZ, table ANLZ)
i get such similar five messages but they are warning..when i execute with warning however i get the fields with description but not with Value.Ex:i get asset description and not Asset number as required.

You don't have to link them, they ar linked that is the power of a logical data base
To get the text in your report you need the key fields
Like
(Lanque Key)
company code
asset number
Asset sub number
Go to info sets and look to the standard ones like /SAPQUERY/AM01

Why does Acrobat Standard 6.0 recognize scanner but Pro 9 will not?

I am running both programs on an Intel Mac (same machine), 10.5.8 Progam. My Acrobat Standard 6.0 pulls in the scanner immediately, but my Pro 9 will not recognize the scanner. Is there something I have to do to get the Pro 9 to recognize the same scanner?

Thank you so much for your patience and expertise. You spent a lot of time
on this with me. Maybe Adobe will fix the problem in the future! Good
luck to you. Joyce
From: Phillip Jones <[email protected]>
Reply-To: <[email protected]>
Date: Fri, 23 Apr 2010 16:22:02 -0600
To: Joyce Hinds <[email protected]>
Subject: Re: Why does Acrobat Standard 6.0 recognize
scanner but Pro 9 will not?
Native

Logical Data Base to be used in the QUICKVIEWER

hello Abappers,
My client cannot select text fields using SQVI so he wants me to come up with a way for him to do so. I was thinking of creating a logical data base which can be selected in SQVI. I could build the FM READ_TEXT into the QV but what I need clarification on is outputting the text fields because the logical data base is really a set of table joins and since I am using the QV I do not have the flexibility that I would have if I was using a logical data base in a program.
Please advise if anybody has any ideas on this approach and how I would structure the output.
regards

Hi Santhosh,
Since you say you are a beginner, lets start this way, hopefully U know from what datasources in ECC or R/3 you are supposed to load data from. Once you are sure about it, then follow this steps.
1) Go to RSA5 transaction in ECC or R/3 System ( source system ).
2) Select the specific datasource from which data is to be extracted to BI and press Activate Datasources button on the top right.
3) Then on check whether this datasource is available in RSA6 screen.
4) Come to BI system, there go to the Source Systems screen, there select the specific Source System (ECC or R/3).
Go to U'r specific Infoarea i.e., SCM in that select the datasource for which U are supposed to extract data, right click and select Replicate Metadata.
5) Once replication is done now right click again on datasource and create and run the infopackage , if its BI 7.0 data will be extracted till PSA.
6) After this create Transformation by right clicking on the Datasource again. Since I guess U will be using standard datasource U will get automatic transformations between the source fields and the infoobjects. Activate Transformations.
7) After this Create a DTP process by again right clicking on the Datasource. Here U specify the Data Target to which data is to be loaded.
8) Activate the DTP, once that's done successfully, Execute the DTP by clicking the Execute Button in the DTP.
9) Monitor U'r data loading thru Monitor screen.
Hope this helps.
Regards,
Syed

Organizer data base is damaged in acrobat 9 standard

Similar Messages

Maybe you are looking for