Help needed in QM02 transaction ?
Hi ,
How to find the Sold-to partner function in the QM 02 transaction for a given notification type ?
Hi Akshay, try this,
However, the partners in a transaction are stored in the CRMD_PARTNER table. (The partner function of the BP in a transaction is stored in the PARTNER_FCT field) By calling the FM CRM_ORDER_READ you get back all the partners (ET_PARTNER table) for a given transaction (not BP number!) with their partner functions.
hope this helps.
Also,
First of all u have to define this bp relatiuonship. Then go to partner determination procedure and define the partner procedure and assign this partner determination procedure to ur transaction typess. When u will create the sales transaction then if u wil enter the sold-to-party in header data the partner will automatically displayed in irem data.
In activity what are the partners are reflecting in partner tab. Have u done all customization for activity sales. Whn u select the SP the partner will show u on partner tab in item details. Can u tell me what are the pertners are showing.
kindly reward if found helpful.
cheers,
Hema.
Edited by: Hema Sundar Munagapati on Jan 28, 2008 4:36 PM
Similar Messages
-
Help needed in PS module on CJ9ECP/CJ20N for revaluating CCR??
help needed in PS module on CJ9ECP/CJ20N for revaluating CCR??
How to handle method on_costing_component_to_outtab which belongs to badi gui_itemization_ck. This is to revaluate CCR in CJ20N.
From sale transaction(va01/va02) i need to call cj20n/cj9ecp for revaluating cost estimates. Can anyone say how to proceed with this thing.
Can any one say how to handle pop up window in CJ20N/CJ9ECP when clicked edit ecp button. Later how to revaluate cost estimates. For this should i need to go for call transaction or is there any method available. If so how to handle method for revaluating cost estimates for ECP of WBS elementsThanks Amol for the advice.
My friend doesn't belong to an engineering background and had not worked in a manufacturing environment.
He holds an MBA degree specialised in systems and has worked in software companies supporting software projects and the functions(like HR,Procurement in the same setup) as a software quality guy.
Moreover the modules mentioned by you requires engineering background with manufacturing exposure.
He had enquired for the course at siemens and they said that he may not be suitable for any of the modules offered by them as per the above reasons.They also mentioned that they have to check with SAP Labs for expert opinion.
Please provide your inputs.
regards,
Zubair. -
Help needed Displaying ALV Secondary list without using oops concept
Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekharhi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*& Form validate
text
--> p1 text
<-- p2 text
FORM VALIDATE .
SELECT SINGLE VBELN
FROM VBAP
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM. " validate
*& Form get_details
text
--> p1 text
<-- p2 text
FORM GET_DETAILS .
SELECT VBELN
POSNR
MATNR
FROM VBAP
INTO TABLE IT_VBAP
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM. " get_details
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " fieldcat
*& Form LAYOUT
text
--> p1 text
<-- p2 text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM. " LAYOUT
*& Form VARIANT
text
--> p1 text
<-- p2 text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM. " VARIANT
*& Form SAVE
text
--> p1 text
<-- p2 text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM. " SAVE
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM. "TOP_OF_PAGE
*& Form ALV_DISPLAY
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = G_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'DC'.
READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE MTART
FROM MARA
INTO V_MTART
WHERE MATNR = IT_VBAP-MATNR.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
ELSE.
WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
WRITE :/ 'MATERIAL TYPE :' , V_MTART.
ENDIF.
ENDIF.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'CLOSE'.
CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
LINE-SIZE 100
LINE-COUNT 60
NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*& Form validate
text
--> p1 text
<-- p2 text
FORM VALIDATE .
SELECT SINGLE VBELN
FROM VBAP
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM. " validate
*& Form get_details
text
--> p1 text
<-- p2 text
FORM GET_DETAILS .
SELECT VBELN
POSNR
MATNR
FROM VBAP
INTO TABLE IT_VBAP
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM. " get_details
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " fieldcat
*& Form LAYOUT
text
--> p1 text
<-- p2 text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM. " LAYOUT
*& Form VARIANT
text
--> p1 text
<-- p2 text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM. " VARIANT
*& Form SAVE
text
--> p1 text
<-- p2 text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM. " SAVE
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM. "TOP_OF_PAGE
*& Form ALV_DISPLAY
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = G_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'DC'.
READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE MTART
FROM MARA
INTO V_MTART
WHERE MATNR = IT_VBAP-MATNR.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
ELSE.
WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
WITH P_MTART EQ V_MTART.
ENDIF.
ENDIF.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'CLOSE'.
CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful -
EDI IDOC generation for interface with Vendor software help needed.
EDI IDOC help needed.
We are NOT an EDI shop, but have a project to output data to Sales Force.com
Sales Force requests IDOC output - eg. 810 Outbound Invoice.
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments?
I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Basicall we have a report program that the user enteres in the date range of Order/Quotes/Invoices they wish to extract, the the program needs to output a flat file (.txt) on the server which is then picked up by Sales Force.com.
Also, is there a way to have in the Partner Profile a generic Partner under the "Type KU" that can be used for all orders/invoices so I don't have to create a KU Partner Type for each and every Sold-To customer we have?
I am very new to EDI so any help would be greatly appreciated.
Thanks.
Scott.Hi Scott,
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
I know it's very tempting to use an interface for such loads if you anyhow have to create one. However, often the volume alone speaks against interface usage for such scenarios.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments? I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Well, the E2* segments basically reflect the external name of the IDoc segment, whereas the function modules you're referring to basically just create an internal version of the IDoc. Once the IDoc framework then passes the IDocs to the partner, the segment names usually (depends on how the IDocs are passed on) get converted to their external name. If there are multiple versions of a segment, then the version number will be appended to the segment name.
Note that IDoc segment definitions are only partially stored in the data dictionary. If you want to see all versions you should always use transaction WE31 to look at segments. There you can also see for example for E1EDK01 the several versions and when you then use in SE37 function module SEGMENT_EXTERNAL_NAME_GET you will see what SAP produces as the external name for segment E1EDK01. This function module is basically the one that handles the segment name translations.
Ignore the comments for subsystem, this is basically an option in SAP to possibly trigger further external tools (e.g. mapping etc.) for handling the outbound IDocs.
Again, the funny thing is that via the WE30 transaction, if i put in INVOIC02 as the Obj. name and see the segments, i can see that E2EDK01 there is a version 005, but if i go to SE11 and put in E2EDK01005 structure line and i get a "not found". We just have up to E2EDK01002.
In the old days SAP used to generate E1, E2 and E3* structures in the data dictionary (SE11). The E1* structure reflected the character type representation of an IDoc segment, whereas the other two (definition and documentation) contained actual references to data elements (e.g. if you used a quantity field). However, in newer releases those dictionary structures (E2* & E3*) are no longer generated, because they're superfluous (meta data defined via WE31 is sufficient).
Cheers, harald -
User Exit for Material Group...Urgent help needed
Does anybody have an idea of which user exit can be used to capture the changes made to material group in MM02(Material)..... Urgent help needed...
See the below user exit and this will trigger under MM01,MM02 and MM17 Transaction
Enhancement name : MGA00001
Function module :EXIT_SAPLMGMU_001
Include : ZXMG0U02
Reward Points if it is helpful.
Thanks
Seshu -
QM-Module .QM02 transaction
Hi,
In QM module for QM02 transaction i had to find a exit or badi
when i click on save button.
I got both Userexit and Badi but i have one issue.
For ex :
In QM02 transaction i enter a notification number which has no
deletion flag Set.User goes in QM02 menu and set the deletion flag at runtime .
How to find the change in status of notification in userexit and badi.
Thanks in advance.
ChetanHi,
First check out the deletion flag field in database table. It would be there in header table. Then check out all the enhancement where exactly you are getting that field. Based on that you can write your logic.
Rewards points if helpful.
Regards,
CS. -
Search Help ORDEE and COOIS Transaction
Hi
I need to build a selection screen having search help Ordee.Currently search help Ordee open COOIS transaction. But our requirement is to only display part of COIS screen i;e only header part. PLease suggest.iIn COOIS put plant and execuite ,all date with verious field is appear ,here one arrow comes click on that arrow
you wil get more fields among that ,there is a page sign near choose layput screen ,click on that and choose u r required field
its not directly link with search field, you will get possible entery by F4 and help by F1
Regards,
Girish -
Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIEIn short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
Help needed! Raid degraded again!
Hi!
Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
What am I doing wrong!
T: Ekku
K8N Neo4 Ultra
AMD 64 4200+
2 Gb RAM
2 x 250 Gb HDD (Maxtor)
nVidia RAID (in mb)
P.S. I wery SORRY with my poor language!I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
LPB -
HELP NEEDED WITH ADDAPTER-DVI TO VGA.
PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me. -
Help needed for grouping.
Hi,
Help needed .
I have an internal table having 6 .
Ex :
f1 f2 f3 f4 f5 f6
a aa 11 p1 10 10
a aa 12 p1 20 20
b aa 11 p2 30 30
b aa 12 p2 40 30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1 f2 f3 f4 f5 f6
a aa 11 p1 30 30.
b aa 11 p2 70 60.
can anyone help me.How to do this..?
ThanksHere you go
DATA:
BEGIN OF cur_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(2) TYPE c,
f6(2) TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
f1 TYPE c,
f4(2) TYPE c,
f5 TYPE p,
f6 TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(5) TYPE c,
f6(5) TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
MOVE-CORRESPONDING cur_tab TO sum_tab.
COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
f4 = sum_tab-f4.
IF sy-subrc NE 0.
WRITE:/ 'Something went very wrong'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING cur_tab TO final_tab.
MOVE-CORRESPONDING sum_tab TO final_tab.
APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
WRITE:/1 final_tab-f1,
AT 5 final_tab-f2,
AT 10 final_tab-f3,
AT 15 final_tab-f4,
AT 20 final_tab-f5,
AT 25 final_tab-f6.
ENDLOOP.
and the output
a aa 11 p1 30 30
b aa 11 p2 70 60 -
Help needed on installation of Oracle 9i on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Help needed on installation of Oracle 9i EE on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM
Maybe you are looking for
-
Does anyone know how to recover messages?
-
Inserting photo into word document with new Yosemite OS X
iPhoto has gone away after downloading the new Yosemite OS X program. Now it is Photos. I am attempting to drag or insert a picture into a word document for work. Unlike the old iPhoto, double clicking on the photo does not allow me to "Copy" so I
-
How to connect Ipad Mini to external home theater speakers
Hi, Recently i bought a new ipad mini, now i want to know how can i connect my Ipad Mini to external home theater speakers (Sony). Please let me know what type of hardware and steps i have to use. Thanks in advance.
-
MS EXCEL ISSUES...
I am having trouble running MS EXCEL (old version) with Snow Leopard. It was running perfectly until I installed SL yesterday. Now it doesn't print correctly and it crashes a lot. Any suggestions? I called APPLE and they said to upgrade OFFICE to 200
-
Hi, I have a big problem with my 5508 WLCs and GLC-T sfps: I'm currently using 2 ports of my WLC with GLC-T sfp I trieb using both LAG and multiple interface. When I have all my copper cables connected between my LAN and my WLC everithing is ok but i