Help needed with consolidating and moving itunes folder.

I have imported songs into itunes using with the Copy Files To iTunes Folder When Adding To The Library box unchecked and moved the location of my music folder to an external hard drive. I already had a folder full of music files on this hard drive so I now have 2 folders with music files, the iTunes folder with music recently imported from cd's and the old folder. The library points to references to both of these folders but not ALL of the files in the old folder as I don't need them in iTunes.
I now want to be able to listen to my iTunes library when not connected to the external drive. How do I do this? If I reset the location of my iTunes folder back to the macbook do I then need to consolidate, and if I do will only the files with reference pointers go into this folder? I don't want all the music files in the old folder to go onto the macbook, only the ones with reference pointers to them, plus the ones in the iTunes music folder.

Similar Messages

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Make iTunes more selective and moved iTunes folder

Hi
I would like to stop iTunes seeing some media on my computer system. (stored videos, sound clips etc)
Currently it finds and adds all media, even the smallest old video clip to its library and to the consolidated media folder.
This means it uses lots of space.
Is there a way to exclude files or folders from the scan to prevent this?
2)
I moved my iTunes folder following instructions found here. (hence consolidated media folder, still required?)
This worked but I would be happier if the associated library files can be moved to the same location.
Currently they must stay in the original location.
Is there a way to do this please.

1. There is no fine control over what gets added if you let iTunes scan your computer for media. My personal recomendation for this is to avoid the inital scan, change the default settings so that iTunes doesn't copy files to the iTunes Media folder, move existing content that wants to be in the library into the iTunes Media folder, then add the iTunes Media folder to the library. I prefer to organise my files & folders manually but usually recommend others to let iTunes do it as it is less effort.
2. By using the recommended method to move the media content you have created a split library. The library files are on one path and the media is at another. It is usually possible to move the library files to a new location provided the media stays put. Exact instructions depend on where you have moved the media folder to and what name you gave it. This post has further details but if you want to let me know where your media and library folders are now I can write something more specific.
N.b. if you don't get a response to a new topic within a day or two then it has probably been buried under new messages before being noticed by someone who might have a solution to offer. Once it is no longer within the first pew pages of topics it is unlikely to get spotted by anyone so your best option is to bump the thread.
tt2

Newbie - help needed with array and dictionary objects

Hi all
Please see the code below. I've posted this code in another thread however the original issue was resolved and this is now a new issue I'm having although centered around the same code.
The issue is that I'm populating an array with dictionary objects. each dictionary object has a key and it's value is another array of custom objects.
I've found that the code runs without error and I end up with my array as I'm expecting however all of the dictionary objects are the same.
I assume it's something to do with pointers and/or re-using the same objects but i'm new to obj-c and pointers so i am a bit lost.
Any help again is very much appreciated.
// Open the database connection and retrieve minimal information for all objects.
- (void)initializeDatabase {
NSMutableArray *authorArray = [[NSMutableArray alloc] init];
self.authors = authorArray;
[authorArray release];
// The database is stored in the application bundle.
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
NSString *path = [documentsDirectory stringByAppendingPathComponent:@"books.sql"];
// Open the database. The database was prepared outside the application.
if (sqlite3_open([path UTF8String], &database) == SQLITE_OK) {
// Get the primary key for all books.
const char *sql = "SELECT id, author FROM author";
sqlite3_stmt *statement;
// Preparing a statement compiles the SQL query into a byte-code program in the SQLite library.
// The third parameter is either the length of the SQL string or -1 to read up to the first null terminator.
if (sqlite3preparev2(database, sql, -1, &statement, NULL) == SQLITE_OK) {
// We "step" through the results - once for each row.
// We start with Letter A...we're building an A - Z grouping
NSString *letter = @"A";
NSMutableArray *tempauthors = [[NSMutableArray alloc] init];
while (sqlite3_step(statement) == SQLITE_ROW) {
author *author = [[author alloc] init];
author.primaryKey = sqlite3columnint(statement, 0);
author.title = [NSString stringWithUTF8String:(char *)sqlite3columntext(statement, 0)];
// FOLLOWING WAS LEFT OVER FROM ORIGINAL COMMENTS IN SQLBooks example....
// We avoid the alloc-init-autorelease pattern here because we are in a tight loop and
// autorelease is slightly more expensive than release. This design choice has nothing to do with
// actual memory management - at the end of this block of code, all the book objects allocated
// here will be in memory regardless of whether we use autorelease or release, because they are
// retained by the books array.
// if the author starts with the Letter we currently have, add it to the temp array
if ([[author.title substringToIndex:1] compare:letter] == NSOrderedSame){
[tempauthors addObject:author];
} // if this is different letter, then we need to deal with that too...
else {
// create a dictionary to store the current tempauthors array in...
NSDictionary *tempDictionary = [NSDictionary dictionaryWithObject:tempauthors forKey:@"authors"];
// add the dictionary to our appDelegate-level array
[authors addObject:tempDictionary];
// now prepare for the next loop...
// set the new letter...
letter = [author.title substringToIndex:1];
// remove all of the previous authors so we don't duplicate...
[tempauthors removeAllObjects];
// add the current author as this was the one that didn't match the Letter and so
// never went into the previous array...
[tempauthors addObject:author];
// release ready for the next loop...
[author release];
// clear up the remaining authors that weren't picked up and saved in the "else" statement above...
if (tempauthors.count > 0){
NSDictionary *tempDictionary = [NSDictionary dictionaryWithObject:tempauthors forKey:@"authors"];
[authors addObject:tempDictionary];
else {
printf("Failed preparing statement %s
", sqlite3_errmsg(database));
// "Finalize" the statement - releases the resources associated with the statement.
sqlite3_finalize(statement);
} else {
// Even though the open failed, call close to properly clean up resources.
sqlite3_close(database);
NSAssert1(0, @"Failed to open database with message '%s'.", sqlite3_errmsg(database));
// Additional error handling, as appropriate...
Message was edited by: dotnetter

Ok, so I know what the issue is now...I just don't know enough to be able to resolve it!
it's the tempAuthors objects.
It's an NSMutableArray which is create on the line before the start of the WHILE loop.
Having looked through the debugger, I can see that each dictionary object is created (with different codes which I assume are memory addresses) so all is well there. However, on each iteration of the loop in the middle there is an IF...ELSE... statement which in the ELSE section is clearing all objects from the tempAuthors array and beginning to repopulate it again.
Looking at the containing dictionary objects in the debugger I can see that the tempAuthors object that each contains has the same code (again, I'm assuming this is a memory address) - so if I understand correctly, it's the same object...I assumed that when I created the dictionary using the dictionWithObject call that I would be passing in a copy of the object, but it's referencing back to the object which I then go on to change.
Assuming the above is correct, I've tried several "stabs in the dark" at fixing it.
I've tried relasing the tempAuthors object within the ELSE and initialising it again via an alloc...init - but this didn't work and again looking through the debugger it looks as though it was confused as to which object it was supposed to be using on the following iteration of the WHILE loop (it tried to access the released object).
Having read a little more about memory management can someone tell me if I'm correct in saying that the above is because the tempAuthors object is declare outside the scope of the WHILE loop yet I then try to re-instantiate it within the loop (does that make sense???).
Sorry for the long post...the more I can understand the process the less I can hopefully stop relying on others for help so much.
I am continuing to read up on memory management etc but just not there yet.
Regards
Wayne

Help needed with doubles and integers

I just want to start telling all you that you have been a big help to me the last couple of months. Now, for my issue. I'm having a problem doing some work with doubles and integers. Below is the code I've tried. But, I keep getting mismatch types. I need num3 to fill in a JTextField by the end with the answer for the calc. Num2 is fill in from a JTextField with a double.
Int num1 = 0, num4 = 0, num3 = 0;
double num2 = 0, totint = 0;
for(count = 0; num4 < count; count++)
totint = (1 + num2);
System.out.println(totint);
num3 = double (num1 * totint);
String k = Integer.toString(num3);
tf3.setText(k); (This is a JTextField)
Test data
num1 = 10000
num2 = 3.4
num4 = 4
num3 = the value from the calc

First of all, your for loop is never going to run.
for (count = 0; num4<count; count++)
totint = (1 + num2);
System.out.println(totint);
num4 = 4 and will not be less than count, so the for loop will not be executed.
Second, what exactly are you trying to accomplish here. The way you have your code set up, the for loop (if it were to execute) would print out 4.4 each time it passes, then do the calculation. You may need to rethink your objective.

Help needed with hatches and fill patterns

Hi,
I'm trying to do an architectural drawing of a building in illustrator. I have the geometry set up in rhino and exported it but I now need to add the brick and pavement patterns to the geometries But I've no idea how to do it accurately?
I'll attach the drawing as a jpeg as is now so you can see what I mean. Excuse the messiness, still very much a work in progress

envelope distort might be teh easiest way.
you could also try using the perspecting grid, but matching the plane can be a pain and sometimes the forshortening is completely the oppositie of what it should be.
so i'd do envelope. draw the face you want to fil. draw a square with the same proportions of the face you want to fill. fill that square with your pattern at the size that they should be. move that square behing the shape of your plane. then make envelope distort with obejct on top.
mask out the holes in the shape as needed with a clipping mask or solid shapes.
play with the envelope handles to adjust for perspective foreshortening.

Help needed with footers and shrinking text

Hi Guys
I got a report that I want to print conditional headers and footers for. When I specify that I only want a foooter to appear on the last page, I get REP-1216 error, I checked out Metalink and followed a note on how to get around it but I'm having no joy. Can anyone help me out? I also want to make certain bits of the header and footer visible depending on a value retrieved from the report query only I get REP-1314 saying that my format trigger referencesa column at the wrong frequency. I know the value is in another frame but how do I make this value available in the margin so that the formatting will work?
Also, I want to be able to shrink some lines of an address if it has a null value at runtime e.g
My House
First Address Line
Second Address Line
<Null>
Post Code
I want to format it so that it appears as:
My House
First Address Line
Second Address Line
Post Code
I really appreciate if someone could help me out as always this is very urgent!
Many thanks
Ciaran

Hi Ciaran,
I only want a foooter to appear on the last page
I am quoting from Note 1017067.102 on Metalink (REP-1216 when running report with field in margin) - you might have already seen this note...
Objects in the margin region are restarted on every physical page. As a
result, not all print condition types make sense for margin objects. Because
objects are restarted on every page, it is as if you are always on the first
page of the object.
The print condition FIRST is the same as the print condition ALL.
The print conditions LAST and ALL BUT LAST are invalid because "LAST" is never
reached.
The print condition ALL BUT FIRST causes the object to never appear because
the object never goes beyond "FIRST" page.
Thus, the only valid print conditions for the object are FIRST and ALL.
also want to make certain bits of the header and footer visible depending on a value retrieved from the report queryYou can use conditional formatting / format trigger only for objects that are in the same group in the data model. For example, you can reference employee_id in the format trigger of employee_name if they are in the same group. In your header / footer Format Trigger, you can reference only report-level columns. So if you can make your column to appear at the report level (outside of any group), you may be able to reference it from the header / footer.
want to be able to shrink some lines of an address if it has a null value at runtime You may be able to use Anchors. See Builder Help for more information and examples.
Navneet.

Help needed with singleSelection and multiple selection in table.

Hi ,
How do i implement the singleSelection and multipleSelection on table rows.
How do i capture the checked rows?
How should the code be written and where should it be written.
I should be capturing the values of the checked rows and pass it to the pl/sql package.
I have a table - in -table so there is a singleselection on the outer table and multiple selection on the Inner table.
Could anyone help me with this.
Thanks,

One solution to most of your questions : Read the advanced table section of Dev guide.
Always go through the dev guide before putting up the issue. Let the forum be for those scenarios which dev guide doesn't covers in much detail.
--Shiv

Old iPad ios (3.2.2) help needed with backup and upgrade

Sorry in advance for what I'm sure will be a remedial post for most everyone on here.
I have an iPAD ios 3.2.2.. I know that's really old, but I have been afraid of upgrading for one reason and one reason alone: Smurfs Village! I know it sounds silly, but my fiancée plays it all the time and I'm terrified of losing all her stuff.
So, I hook iPAD to laptop and see most of my stuff (videos, some games, etc.) in the iTunes ready for what I assume is a backup, but no Smurfs Village! I see posts out there on the Internet saying to just sync to Game-Center and yada yada yada, but that's obviously a "no go" with my version of the OS and i can't upgrade until I make sure everything is backed up...... See this vicious cycle that I have gotten myself into?
I'm really kind of embarrassed typing this. I've had a couple of Apple notebooks over the years,but never anything that runs IOS so I'm really kind of lost and scared to do anything without some solid and sound advice from ths forum. I'm not even sure that if I sync to iTunes on my PC, will it back EVERYTHING up before I upgrade the OS. or is it just certain things that get backed up? Do I need to purchase a third party app? See, I am really lost here so someone please have mercy on me so I can get this thing (Smurfs Village) backed up and restored while still keeping my marriage on the right track.
Thanks for any help I can get. I really appreciate it very much.
Sincerely,
"A desperate man"

If it's an app then it should reside in your iTunes library. If it doesn't you can transfer purchases
http://support.apple.com/kb/ht1848
When you sync a backup of the device is done, which would contain app data among other things. You can also select iPad under devices, right click and manually back up.
http://support.apple.com/kb/ht1766
http://support.apple.com/kb/ht1414

Help needed with layers and project files....

Hello
I am new to after effects so this might be a simple issue for most. I am having an issue with my layers not matching the files in my project window. I accidently deleted a comp file the other day so I had to remake a few layers but they are not showing up in the project window/solids folder. I have 5 layers on my timeline and only 4 files in the project/solids folder. Some of the files names do not match the ones in the timeline. Is there a way to create a new comp with the files that I have open in my timeline or to replace the ones in the project window? I started a project a few days ago, Im trying to make a few partical orbs dancing on there own path then they will come together and then creates a few smaller ones. Im at the point where I want to copy one comp to another or copy the layers over but the particals follow one light instead of the original light from its own comp. I think the file names in the project window might be the issue but I really don't know. Any help or comments would greatly be appreciated
Thanks a million
Adam
Using trapcode particular and AE CS6
Windows system

Layers on the timeline are just instances of the source footage. If you rename them on the timeline, that won't affect the number or naming of the sources in the project window. Toggle the column header in the TL to see which laywer uses which source.
Mylenium

Help Needed With Scrollbar and Content

I'm having a difficult time with the Scrollbar component. I'm trying to have a scrollbar set up to navigate a text field or a MC of a text field. I managed to get it functioning within the desired frame, however when I jump to another frame, that very same content appears on the other frame, despite the fact that said frame did not have the scrollbar nor the content pasted within.
The bar seems to do what I want it to do save for the unwelcomed presence outside of the frame of choice. Here's the code I'm using. This is the keyframe code:
import boppreh.ui.Scrollbar
var scrollbar1:Scrollbar = new Scrollbar(boomboom, 500, true, false, 293, bar, slider, arrowUp, arrowDown)
addChild(scrollbar1)
scrollbar1.x = 50
scrollbar1.y = 50
And this is the code found in the AS file:
package boppreh.ui
    import flash.display.*
    import flash.events.*
    import flash.geom.Rectangle;
    import flash.utils.Timer
    import flash.ui.Keyboard
     * Scrollbar to handle single display objects.
     * Author: Lucas Boppre Niehues ([email protected])
     * Date: 09/02/2010
    public class Scrollbar extends Sprite {
        /// The default width for the default slider, bar and arrows, as well as the default arrows' height
        public static const DEFAULT_SIDE:Number = 20
        /// The delay (in milliseconds) between clicking and holding an arrow and the slider moving continously
        public static var SCROLL_DELAY:Number = 300
        /// The number of lines to be scrolled every second during continous scrolling
        public static var LINES_PER_SECOND:Number = 1.5
        /// Number of pixels to be scrolled for each mouse wheel line (default lines per wheel tick is 3)
        public static var PIXELS_PER_LINE:Number = 16
        protected var windowSize:Number
        protected var contentPadding:Number
        protected var isVertical:Boolean
        /// Stored movement to be applied on the next "scroll()" call
        protected var movement:Number
        /// Timer used to control the delay before continous scrolling
        protected var timer:Timer
        protected var content:DisplayObject
        protected var contentBounds:Rectangle
        protected var bar:InteractiveObject
        protected var arrowUp:InteractiveObject
        protected var arrowDown:InteractiveObject
        protected var slider:InteractiveObject
        protected var partHold:InteractiveObject
        protected function get eventOrigin():String {
            if (partHold == arrowUp)
                return ScrollEvent.ARROW_UP
            else if (partHold == arrowDown)
                return ScrollEvent.ARROW_DOWN
            else if (partHold == bar)
                return ScrollEvent.BAR
            throw new Error("Unkown event origin.")
        private var mouseOffset:Number
        protected function get maxContentPos():Number {
            if (isVertical)
                return -(contentBounds.height - windowSize) - 1
            else
                return -(contentBounds.width - windowSize) - 1
        /// The content's current position, in a scale from 0 to 1
        public function get position():Number {
            if (isVertical)
                return contentBounds.y / maxContentPos
            else
                return contentBounds.x / maxContentPos
        public function set position(value:Number) {
            value = Math.min(1, Math.max(value, 0))
            var newContentPos:Number = value * maxContentPos
            setPosition(content, isVertical ? null : newContentPos, isVertical ? newContentPos : null, false, false)
            contentBounds = content.getBounds(this)
            if (isVertical) {
                bar.height = windowSize - (arrowUp.height + arrowDown.height)
                slider.height = (windowSize / Math.max(contentBounds.height, windowSize)) * bar.height
                var newSliderY:Number = arrowUp.height + (-newContentPos / contentBounds.height) * bar.height
                setPosition(slider, null, newSliderY, false, false)
            } else {
                bar.width = windowSize - (arrowUp.width + arrowDown.width)
                slider.width = (windowSize / Math.max(contentBounds.width, windowSize)) * bar.width
                var newSliderX:Number = arrowUp.width + (-newContentPos / contentBounds.width) * bar.width
                setPosition(slider, newSliderX, null, false, false)
            updatePartsPositions()
         * Creates a new Scrollbar object to scroll a single Display Object.
         * @param    content    the object to be scrolled
         * @param    windowSize    the height or width of the scrollbar, depending if it's vertical or not; i.e.: the dimension of the content's visible part
         * @param    isVertical    defines if the scrollbar's parts should be placed on the right or bottom of the content, and if the content should be scrolled upways or to the right
         * @param    autoUpdate    automatically checks for dimensions changes in any part and updates accordingly. Use only if the content will be resized
         * @param    contentPadding    the distance between the content and all the other parts
         * @param    bar    the bar object to be used; if null, a default one will be used
         * @param    slider    the slider object to be used; if null, a default one will be used
         * @param    arrowUp    the arrow up/left object to be used; if null, a default one will be used
         * @param    arrowDown    the arrow down/right object to be used; if null, a default one will be used
        public function Scrollbar(content:DisplayObject, windowSize:Number, isVertical:Boolean=true, autoUpdate:Boolean=false, contentPadding:Number=5, bar:InteractiveObject=null, slider:InteractiveObject=null, arrowUp:InteractiveObject=null, arrowDown:InteractiveObject=null) {
            this.content = content
            this.windowSize = windowSize
            this.contentPadding = contentPadding
            this.isVertical = isVertical
            this.bar = bar || createDefaultBar()
            this.arrowUp = arrowUp || createDefaultArrow(false)
            this.arrowDown = arrowDown || createDefaultArrow(true)
            this.slider = slider || createDefaultSlider()
            timer = new Timer(SCROLL_DELAY)
            timer.addEventListener(TimerEvent.TIMER, startScrolling)
            addParts()
            if (autoUpdate)
                this.addEventListener(Event.ENTER_FRAME, update)
            configureListeners()
            update()
            position = 0
        protected function scroll(e:*= null):void {
            // This nested if forbids the slider to continue moving if the user is
            // "holding" the bar and the slider already reached the mouse position
            if (e && (e is Event) && (Event(e).type == Event.ENTER_FRAME)) {
                if (partHold == bar) {
                    var sliderBounds:Rectangle = slider.getBounds(this)
                    if (isVertical) {
                        if (mouseY > sliderBounds.top && mouseY < sliderBounds.bottom) {
                            stopScrolling()
                            return
                    } else {
                        if (mouseX > sliderBounds.left && mouseX < sliderBounds.right) {
                            stopScrolling()
                            return
            scrollPixels(movement)
         * Scrolls the content by the specified ammount.
         * @param    number    number of pixels to be scrolled
        protected function scrollPixels(number:Number):void {
            position += number / -maxContentPos
        protected function configureListeners():void {
            slider.addEventListener(MouseEvent.MOUSE_DOWN, startSliderDrag)
            for each (var part:InteractiveObject in [arrowUp, arrowDown, bar]) {
                part.addEventListener(MouseEvent.MOUSE_DOWN, fixedPart_onMouseDownHandler)
            addEventListener(MouseEvent.MOUSE_WHEEL, mouse_onWheelScrollHandler)
            addEventListener(KeyboardEvent.KEY_DOWN, keyboard_onKeyDownHandler)
        protected function fixedPart_onMouseDownHandler(event:MouseEvent):void
            partHold = InteractiveObject(event.currentTarget)
            if (partHold == arrowUp) {
                movement = -PIXELS_PER_LINE
            } else if (partHold == arrowDown) {
                movement = PIXELS_PER_LINE
            } else if (partHold == bar) {
                var sliderBounds:Rectangle = slider.getBounds(this)
                if (isVertical) {
                    if (mouseY > (sliderBounds.top + sliderBounds.height / 2))
                        movement = windowSize
                    else
                        movement = -windowSize
                } else {
                    if (mouseX > (sliderBounds.left + sliderBounds.width / 2))
                        movement = windowSize
                    else
                        movement = -windowSize
            scroll()
            dispatchEvent(new ScrollEvent(ScrollEvent.SCROLL, eventOrigin))
            stage.addEventListener(MouseEvent.MOUSE_UP, stopScrolling)
            partHold.addEventListener(MouseEvent.MOUSE_OUT, stopScrolling)
            timer.start()
        protected function keyboard_onKeyDownHandler(event:KeyboardEvent):void {
            switch (event.keyCode) {
                case Keyboard.UP:
                case Keyboard.LEFT:
                    movement = -PIXELS_PER_LINE
                    break
                case Keyboard.DOWN:
                case Keyboard.RIGHT:
                    movement = PIXELS_PER_LINE
                    break
                case Keyboard.SPACE:
                case Keyboard.PAGE_DOWN:
                    movement = windowSize
                    break
                case Keyboard.PAGE_UP:
                    movement = -windowSize
                    break
                case Keyboard.HOME:
                    movement = 0
                    position = 0
                    break
                case Keyboard.END:
                    movement = 0
                    position = 100
                    break
                default:
                    return
            scroll()
            dispatchEvent(new ScrollEvent(ScrollEvent.SCROLL, ScrollEvent.KEYBOARD))
        protected function startScrolling(e:*=null):void {
            timer.reset()
            this.addEventListener(Event.ENTER_FRAME, scroll)
            movement = (movement * (LINES_PER_SECOND * PIXELS_PER_LINE)) / stage.frameRate
            dispatchEvent(new ScrollEvent(ScrollEvent.CONTINOUS_SCROLL_START, eventOrigin))
        protected function stopScrolling(e:*=null) {
            timer.stop()
            this.removeEventListener(Event.ENTER_FRAME, scroll)
            stage.removeEventListener(KeyboardEvent.KEY_UP, stopScrolling)
            stage.removeEventListener(MouseEvent.MOUSE_UP, stopScrolling)
            dispatchEvent(new ScrollEvent(ScrollEvent.CONTINOUS_SCROLL_STOP, eventOrigin))
            if (partHold) {
                partHold.removeEventListener(MouseEvent.MOUSE_OUT, stopScrolling)
                partHold = null
        protected function mouse_onWheelScrollHandler(event:MouseEvent) {
            // The mouse wheel delta arrives inverted
            var delta:int = -event.delta
            movement = delta * PIXELS_PER_LINE
            scroll()
            dispatchEvent(new ScrollEvent(ScrollEvent.SCROLL, ScrollEvent.MOUSE_WHEEL))
        //{ region Slider Drag functions
        protected function startSliderDrag(event:MouseEvent) {
            if (isVertical)
                mouseOffset = slider.getBounds(this).y - this.mouseY
            else
                mouseOffset = slider.getBounds(this).x - this.mouseX
            stage.addEventListener(MouseEvent.MOUSE_MOVE, onSliderDrag)
            stage.addEventListener(MouseEvent.MOUSE_UP, stopSliderDrag)
            dispatchEvent(new ScrollEvent(ScrollEvent.SLIDER_DRAG_START, ScrollEvent.SLIDER))
        protected function stopSliderDrag(event:MouseEvent) {
            stage.removeEventListener(MouseEvent.MOUSE_UP, stopSliderDrag)
            stage.removeEventListener(MouseEvent.MOUSE_MOVE, onSliderDrag)
            dispatchEvent(new ScrollEvent(ScrollEvent.SLIDER_DRAG_STOP, ScrollEvent.SLIDER))
        protected function onSliderDrag(event:MouseEvent) {
            if (isVertical) {
                if (bar.height == slider.height)
                    return
            } else {
                if (bar.width == slider.width)
                    return
            if (isVertical)
                position = (this.mouseY + mouseOffset - arrowUp.height) / (bar.height - slider.height)
            else
                position = (this.mouseX + mouseOffset - arrowUp.width) / (bar.width - slider.width)
        //} endregion
        //{ region Visual functions
        /// Adds all required parts to the scrollbar's display list
        protected function addParts():void {
            setPosition(content, 0, 0, false, false)
            addChild(this.bar)
            addChild(this.arrowUp)
            addChild(this.arrowDown)
            addChild(this.slider)
            addChild(this.content)
         * Updates all parts to fit the new dimensions and positions.
        public function update(e:*= null):void {
            contentBounds = content.getBounds(this)
            updatePartsPositions()
            // Ugly, but updates everything that was not update in the above call based on the content's position and size
            position = position
        protected function updatePartsPositions(event:Event = null):void {
            if (isVertical) {
                // The parts width is divided by 2 because they will be center aligned
                var newX:Number = contentBounds.width +
                            contentPadding +
                            Math.max(slider.width, arrowUp.width, arrowDown.width, bar.width) / 2
                setPosition(arrowUp, newX, 0, true, false)
                setPosition(bar, newX, arrowUp.height, true, false)
                setPosition(arrowDown, newX, arrowUp.height + bar.height, true, false)
                setPosition(slider, newX, null, true, false)
            } else {
                var newY:Number = contentBounds.height +
                            contentPadding +
                            Math.max(slider.height, arrowUp.height, arrowDown.height, bar.height) / 2
                setPosition(arrowUp, 0, newY, false, true)
                setPosition(bar, arrowUp.width, newY, false, true)
                setPosition(arrowDown, arrowUp.width + bar.width, newY, false, true)
                setPosition(slider, null, newY, false, true)
            updateMask()
        private function updateMask():void {
            if (content.mask && this.contains(content.mask))
                removeChild(content.mask)
            var contentMask:Sprite = createWindowMask()
            addChild(contentMask)
            content.mask = contentMask
        protected function setPosition(part:DisplayObject, newX:Object=null, newY:Object=null, alignHorizontal:Boolean=false, alignVertical:Boolean=false):void {
            var bounds:Rectangle = part.getBounds(this)
            if (newX is Number)
                part.x = int(newX) + (part.x - bounds.x) - ((alignHorizontal) ? bounds.width / 2 : 0)
            if (newY is Number)
                part.y = int(newY) + (part.y - bounds.y) - ((alignVertical) ? bounds.height / 2 : 0)
        //} endregion
        //{ region Functions to draw parts
        private function createDefaultBar():Sprite {
            var image:Sprite = new Sprite()
            image.graphics.lineStyle(1)
            image.graphics.beginFill(0xFFFFFF)
            if (isVertical)
                image.graphics.drawRect(0, 0, DEFAULT_SIDE, windowSize - DEFAULT_SIDE * 2)
            else
                image.graphics.drawRect(0, 0, windowSize - DEFAULT_SIDE * 2, DEFAULT_SIDE)
            image.graphics.endFill()
            //image.buttonMode = true
            return image
        private function createDefaultArrow(inverted:Boolean):Sprite {
            var image:Sprite = new Sprite()
            image.graphics.lineStyle(1)
            image.graphics.beginFill(0xBFBFBF)
            image.graphics.drawRect(0, 0, DEFAULT_SIDE, DEFAULT_SIDE)
            image.graphics.endFill()
            image.graphics.lineStyle(3)
            if (isVertical) {
                if (inverted) {
                    image.graphics.moveTo(4, 4)
                    image.graphics.lineTo(10, 16)
                    image.graphics.lineTo(16, 4)
                } else {
                    image.graphics.moveTo(4, 16)
                    image.graphics.lineTo(10, 4)
                    image.graphics.lineTo(16, 16)
            } else {
                if (inverted) {
                    image.graphics.moveTo(4, 4)
                    image.graphics.lineTo(16, 10)
                    image.graphics.lineTo(4, 16)
                } else {
                    image.graphics.moveTo(16, 4)
                    image.graphics.lineTo(4, 10)
                    image.graphics.lineTo(16, 16)
            image.buttonMode = true
            return image
        private function createDefaultSlider():Sprite {
            var image:Sprite = new Sprite()
            image.graphics.lineStyle(1)
            image.graphics.beginFill(0xBFBFBF)
            if (isVertical)
                image.graphics.drawRect(0, 0, DEFAULT_SIDE, windowSize - DEFAULT_SIDE * 2)
            else
                image.graphics.drawRect(0, 0, windowSize - DEFAULT_SIDE * 2, DEFAULT_SIDE)
            image.graphics.endFill()
            image.buttonMode = true
            return image
        private function createWindowMask():Sprite {
            var image:Sprite = new Sprite()
            image.graphics.lineStyle(0)
            image.graphics.beginFill(0x000000, 1)
            if (isVertical)
                image.graphics.drawRect(0, 0, content.width + 1, windowSize)
            else
                image.graphics.drawRect(0, 0, windowSize, content.width + 1)
            image.graphics.endFill()
            image.alpha = 0
            return image
        //} endregion
And this is the ScrollEvent AS file:
package boppreh.ui
    import flash.events.Event;
     * Events related to the Scrollbar class.
     * Author: Lucas Boppre Niehues ([email protected])
     * Date: 09/02/2010
    public class ScrollEvent extends Event
        /// Dispatched when a scroll movement occurs
        public static const SCROLL:String = "scroll"
        /// Dispatched when the user has clicked and is holding an arrow or the bar
        public static const CONTINOUS_SCROLL_START:String = "continous scroll start"
        /// Dispatched when the user has clicked and dropped an arrow or the bar
        public static const CONTINOUS_SCROLL_STOP:String = "continous scroll stop"
        /// Dispatched when the user starts dragging the slider part
        public static const SLIDER_DRAG_START:String = "slider drag start"
        /// Dispatched when the user stops dragging the slider part
        public static const SLIDER_DRAG_STOP:String = "slider drag stop"
        /// Origin type representing the arrow up part
        public static const ARROW_UP:String = "arrow up"
        /// Origin type representing the arrow down part
        public static const ARROW_DOWN:String = "arrow down"
        /// Origin type representing the bar part
        public static const BAR:String = "part"
        /// Origin type representing the slider part
        public static const SLIDER:String = "slider"
        /// Origin type representing the keyboard
        public static const KEYBOARD:String = "keyboard"
        /// Origin type representing the mouse wheel
        public static const MOUSE_WHEEL:String = "mouse wheel"
        public var origin:String
         * Creates a new ScrollEvent object.
         * @param    type    the object type (first group of declared constants)
         * @param    origin    the object that originated the event (second group of declared constants)
        public function ScrollEvent (type:String, origin:String, bubbles:Boolean = false, cancelable:Boolean = false) {
            this.origin = origin
            super(type, bubbles, cancelable)
Any help would be appreciated. I've been stuck here all day.

I'm having a difficult time with the Scrollbar component. I'm trying to have a scrollbar set up to navigate a text field or a MC of a text field. I managed to get it functioning within the desired frame, however when I jump to another frame, that very same content appears on the other frame, despite the fact that said frame did not have the scrollbar nor the content pasted within.
The bar seems to do what I want it to do save for the unwelcomed presence outside of the frame of choice. Here's the code I'm using. This is the keyframe code:
import boppreh.ui.Scrollbar
var scrollbar1:Scrollbar = new Scrollbar(boomboom, 500, true, false, 293, bar, slider, arrowUp, arrowDown)
addChild(scrollbar1)
scrollbar1.x = 50
scrollbar1.y = 50
And this is the code found in the AS file:
package boppreh.ui
    import flash.display.*
    import flash.events.*
    import flash.geom.Rectangle;
    import flash.utils.Timer
    import flash.ui.Keyboard
     * Scrollbar to handle single display objects.
     * Author: Lucas Boppre Niehues ([email protected])
     * Date: 09/02/2010
    public class Scrollbar extends Sprite {
        /// The default width for the default slider, bar and arrows, as well as the default arrows' height
        public static const DEFAULT_SIDE:Number = 20
        /// The delay (in milliseconds) between clicking and holding an arrow and the slider moving continously
        public static var SCROLL_DELAY:Number = 300
        /// The number of lines to be scrolled every second during continous scrolling
        public static var LINES_PER_SECOND:Number = 1.5
        /// Number of pixels to be scrolled for each mouse wheel line (default lines per wheel tick is 3)
        public static var PIXELS_PER_LINE:Number = 16
        protected var windowSize:Number
        protected var contentPadding:Number
        protected var isVertical:Boolean
        /// Stored movement to be applied on the next "scroll()" call
        protected var movement:Number
        /// Timer used to control the delay before continous scrolling
        protected var timer:Timer
        protected var content:DisplayObject
        protected var contentBounds:Rectangle
        protected var bar:InteractiveObject
        protected var arrowUp:InteractiveObject
        protected var arrowDown:InteractiveObject
        protected var slider:InteractiveObject
        protected var partHold:InteractiveObject
        protected function get eventOrigin():String {
            if (partHold == arrowUp)
                return ScrollEvent.ARROW_UP
            else if (partHold == arrowDown)
                return ScrollEvent.ARROW_DOWN
            else if (partHold == bar)
                return ScrollEvent.BAR
            throw new Error("Unkown event origin.")
        private var mouseOffset:Number
        protected function get maxContentPos():Number {
            if (isVertical)
                return -(contentBounds.height - windowSize) - 1
            else
                return -(contentBounds.width - windowSize) - 1
        /// The content's current position, in a scale from 0 to 1
        public function get position():Number {
            if (isVertical)
                return contentBounds.y / maxContentPos
            else
                return contentBounds.x / maxContentPos
        public function set position(value:Number) {
            value = Math.min(1, Math.max(value, 0))
            var newContentPos:Number = value * maxContentPos
            setPosition(content, isVertical ? null : newContentPos, isVertical ? newContentPos : null, false, false)
            contentBounds = content.getBounds(this)
            if (isVertical) {
                bar.height = windowSize - (arrowUp.height + arrowDown.height)
                slider.height = (windowSize / Math.max(contentBounds.height, windowSize)) * bar.height
                var newSliderY:Number = arrowUp.height + (-newContentPos / contentBounds.height) * bar.height
                setPosition(slider, null, newSliderY, false, false)
            } else {
                bar.width = windowSize - (arrowUp.width + arrowDown.width)
                slider.width = (windowSize / Math.max(contentBounds.width, windowSize)) * bar.width
                var newSliderX:Number = arrowUp.width + (-newContentPos / contentBounds.width) * bar.width
                setPosition(slider, newSliderX, null, false, false)
            updatePartsPositions()
         * Creates a new Scrollbar object to scroll a single Display Object.
         * @param    content    the object to be scrolled
         * @param    windowSize    the height or width of the scrollbar, depending if it's vertical or not; i.e.: the dimension of the content's visible part
         * @param    isVertical    defines if the scrollbar's parts should be placed on the right or bottom of the content, and if the content should be scrolled upways or to the right
         * @param    autoUpdate    automatically checks for dimensions changes in any part and updates accordingly. Use only if the content will be resized
         * @param    contentPadding    the distance between the content and all the other parts
         * @param    bar    the bar object to be used; if null, a default one will be used
         * @param    slider    the slider object to be used; if null, a default one will be used
         * @param    arrowUp    the arrow up/left object to be used; if null, a default one will be used
         * @param    arrowDown    the arrow down/right object to be used; if null, a default one will be used
        public function Scrollbar(content:DisplayObject, windowSize:Number, isVertical:Boolean=true, autoUpdate:Boolean=false, contentPadding:Number=5, bar:InteractiveObject=null, slider:InteractiveObject=null, arrowUp:InteractiveObject=null, arrowDown:InteractiveObject=null) {
            this.content = content
            this.windowSize = windowSize
            this.contentPadding = contentPadding
            this.isVertical = isVertical
            this.bar = bar || createDefaultBar()
            this.arrowUp = arrowUp || createDefaultArrow(false)
            this.arrowDown = arrowDown || createDefaultArrow(true)
            this.slider = slider || createDefaultSlider()
            timer = new Timer(SCROLL_DELAY)
            timer.addEventListener(TimerEvent.TIMER, startScrolling)
            addParts()
            if (autoUpdate)
                this.addEventListener(Event.ENTER_FRAME, update)
            configureListeners()
            update()
            position = 0
        protected function scroll(e:*= null):void {
            // This nested if forbids the slider to continue moving if the user is
            // "holding" the bar and the slider already reached the mouse position
            if (e && (e is Event) && (Event(e).type == Event.ENTER_FRAME)) {
                if (partHold == bar) {
                    var sliderBounds:Rectangle = slider.getBounds(this)
                    if (isVertical) {
                        if (mouseY > sliderBounds.top && mouseY < sliderBounds.bottom) {
                            stopScrolling()
                            return
                    } else {
                        if (mouseX > sliderBounds.left && mouseX < sliderBounds.right) {
                            stopScrolling()
                            return
            scrollPixels(movement)
         * Scrolls the content by the specified ammount.
         * @param    number    number of pixels to be scrolled
        protected function scrollPixels(number:Number):void {
            position += number / -maxContentPos
        protected function configureListeners():void {
            slider.addEventListener(MouseEvent.MOUSE_DOWN, startSliderDrag)
            for each (var part:InteractiveObject in [arrowUp, arrowDown, bar]) {
                part.addEventListener(MouseEvent.MOUSE_DOWN, fixedPart_onMouseDownHandler)
            addEventListener(MouseEvent.MOUSE_WHEEL, mouse_onWheelScrollHandler)
            addEventListener(KeyboardEvent.KEY_DOWN, keyboard_onKeyDownHandler)
        protected function fixedPart_onMouseDownHandler(event:MouseEvent):void
            partHold = InteractiveObject(event.currentTarget)
            if (partHold == arrowUp) {
                movement = -PIXELS_PER_LINE
            } else if (partHold == arrowDown) {
                movement = PIXELS_PER_LINE
            } else if (partHold == bar) {
                var sliderBounds:Rectangle = slider.getBounds(this)
                if (isVertical) {
                    if (mouseY > (sliderBounds.top + sliderBounds.height / 2))
                        movement = windowSize
                    else
                        movement = -windowSize
                } else {
                    if (mouseX > (sliderBounds.left + sliderBounds.width / 2))
                        movement = windowSize
                    else
                        movement = -windowSize
            scroll()
            dispatchEvent(new ScrollEvent(ScrollEvent.SCROLL, eventOrigin))
            stage.addEventListener(MouseEvent.MOUSE_UP, stopScrolling)
            partHold.addEventListener(MouseEvent.MOUSE_OUT, stopScrolling)
            timer.start()
        protected function keyboard_onKeyDownHandler(event:KeyboardEvent):void {
            switch (event.keyCode) {
                case Keyboard.UP:
                case Keyboard.LEFT:
                    movement = -PIXELS_PER_LINE
                    break
                case Keyboard.DOWN:
                case Keyboard.RIGHT:
                    movement = PIXELS_PER_LINE
                    break
                case Keyboard.SPACE:
                case Keyboard.PAGE_DOWN:
                    movement = windowSize
                    break
                case Keyboard.PAGE_UP:
                    movement = -windowSize
                    break
                case Keyboard.HOME:
                    movement = 0
                    position = 0
                    break
                case Keyboard.END:
                    movement = 0
                    position = 100
                    break
                default:
                    return
            scroll()
            dispatchEvent(new ScrollEvent(ScrollEvent.SCROLL, ScrollEvent.KEYBOARD))
        protected function startScrolling(e:*=null):void {
            timer.reset()
            this.addEventListener(Event.ENTER_FRAME, scroll)
            movement = (movement * (LINES_PER_SECOND * PIXELS_PER_LINE)) / stage.frameRate
            dispatchEvent(new ScrollEvent(ScrollEvent.CONTINOUS_SCROLL_START, eventOrigin))
        protected function stopScrolling(e:*=null) {
            timer.stop()
            this.removeEventListener(Event.ENTER_FRAME, scroll)
            stage.removeEventListener(KeyboardEvent.KEY_UP, stopScrolling)
            stage.removeEventListener(MouseEvent.MOUSE_UP, stopScrolling)
            dispatchEvent(new ScrollEvent(ScrollEvent.CONTINOUS_SCROLL_STOP, eventOrigin))
            if (partHold) {
                partHold.removeEventListener(MouseEvent.MOUSE_OUT, stopScrolling)
                partHold = null
        protected function mouse_onWheelScrollHandler(event:MouseEvent) {
            // The mouse wheel delta arrives inverted
            var delta:int = -event.delta
            movement = delta * PIXELS_PER_LINE
            scroll()
            dispatchEvent(new ScrollEvent(ScrollEvent.SCROLL, ScrollEvent.MOUSE_WHEEL))
        //{ region Slider Drag functions
        protected function startSliderDrag(event:MouseEvent) {
            if (isVertical)
                mouseOffset = slider.getBounds(this).y - this.mouseY
            else
                mouseOffset = slider.getBounds(this).x - this.mouseX
            stage.addEventListener(MouseEvent.MOUSE_MOVE, onSliderDrag)
            stage.addEventListener(MouseEvent.MOUSE_UP, stopSliderDrag)
            dispatchEvent(new ScrollEvent(ScrollEvent.SLIDER_DRAG_START, ScrollEvent.SLIDER))
        protected function stopSliderDrag(event:MouseEvent) {
            stage.removeEventListener(MouseEvent.MOUSE_UP, stopSliderDrag)
            stage.removeEventListener(MouseEvent.MOUSE_MOVE, onSliderDrag)
            dispatchEvent(new ScrollEvent(ScrollEvent.SLIDER_DRAG_STOP, ScrollEvent.SLIDER))
        protected function onSliderDrag(event:MouseEvent) {
            if (isVertical) {
                if (bar.height == slider.height)
                    return
            } else {
                if (bar.width == slider.width)
                    return
            if (isVertical)
                position = (this.mouseY + mouseOffset - arrowUp.height) / (bar.height - slider.height)
            else
                position = (this.mouseX + mouseOffset - arrowUp.width) / (bar.width - slider.width)
        //} endregion
        //{ region Visual functions
        /// Adds all required parts to the scrollbar's display list
        protected function addParts():void {
            setPosition(content, 0, 0, false, false)
            addChild(this.bar)
            addChild(this.arrowUp)
            addChild(this.arrowDown)
            addChild(this.slider)
            addChild(this.content)
         * Updates all parts to fit the new dimensions and positions.
        public function update(e:*= null):void {
            contentBounds = content.getBounds(this)
            updatePartsPositions()
            // Ugly, but updates everything that was not update in the above call based on the content's position and size
            position = position
        protected function updatePartsPositions(event:Event = null):void {
            if (isVertical) {
                // The parts width is divided by 2 because they will be center aligned
                var newX:Number = contentBounds.width +
                            contentPadding +
                            Math.max(slider.width, arrowUp.width, arrowDown.width, bar.width) / 2
                setPosition(arrowUp, newX, 0, true, false)
                setPosition(bar, newX, arrowUp.height, true, false)
                setPosition(arrowDown, newX, arrowUp.height + bar.height, true, false)
                setPosition(slider, newX, null, true, false)
            } else {
                var newY:Number = contentBounds.height +
                            contentPadding +
                            Math.max(slider.height, arrowUp.height, arrowDown.height, bar.height) / 2
                setPosition(arrowUp, 0, newY, false, true)
                setPosition(bar, arrowUp.width, newY, false, true)
                setPosition(arrowDown, arrowUp.width + bar.width, newY, false, true)
                setPosition(slider, null, newY, false, true)
            updateMask()
        private function updateMask():void {
            if (content.mask && this.contains(content.mask))
                removeChild(content.mask)
            var contentMask:Sprite = createWindowMask()
            addChild(contentMask)
            content.mask = contentMask
        protected function setPosition(part:DisplayObject, newX:Object=null, newY:Object=null, alignHorizontal:Boolean=false, alignVertical:Boolean=false):void {
            var bounds:Rectangle = part.getBounds(this)
            if (newX is Number)
                part.x = int(newX) + (part.x - bounds.x) - ((alignHorizontal) ? bounds.width / 2 : 0)
            if (newY is Number)
                part.y = int(newY) + (part.y - bounds.y) - ((alignVertical) ? bounds.height / 2 : 0)
        //} endregion
        //{ region Functions to draw parts
        private function createDefaultBar():Sprite {
            var image:Sprite = new Sprite()
            image.graphics.lineStyle(1)
            image.graphics.beginFill(0xFFFFFF)
            if (isVertical)
                image.graphics.drawRect(0, 0, DEFAULT_SIDE, windowSize - DEFAULT_SIDE * 2)
            else
                image.graphics.drawRect(0, 0, windowSize - DEFAULT_SIDE * 2, DEFAULT_SIDE)
            image.graphics.endFill()
            //image.buttonMode = true
            return image
        private function createDefaultArrow(inverted:Boolean):Sprite {
            var image:Sprite = new Sprite()
            image.graphics.lineStyle(1)
            image.graphics.beginFill(0xBFBFBF)
            image.graphics.drawRect(0, 0, DEFAULT_SIDE, DEFAULT_SIDE)
            image.graphics.endFill()
            image.graphics.lineStyle(3)
            if (isVertical) {
                if (inverted) {
                    image.graphics.moveTo(4, 4)
                    image.graphics.lineTo(10, 16)
                    image.graphics.lineTo(16, 4)
                } else {
                    image.graphics.moveTo(4, 16)
                    image.graphics.lineTo(10, 4)
                    image.graphics.lineTo(16, 16)
            } else {
                if (inverted) {
                    image.graphics.moveTo(4, 4)
                    image.graphics.lineTo(16, 10)
                    image.graphics.lineTo(4, 16)
                } else {
                    image.graphics.moveTo(16, 4)
                    image.graphics.lineTo(4, 10)
                    image.graphics.lineTo(16, 16)
            image.buttonMode = true
            return image
        private function createDefaultSlider():Sprite {
            var image:Sprite = new Sprite()
            image.graphics.lineStyle(1)
            image.graphics.beginFill(0xBFBFBF)
            if (isVertical)
                image.graphics.drawRect(0, 0, DEFAULT_SIDE, windowSize - DEFAULT_SIDE * 2)
            else
                image.graphics.drawRect(0, 0, windowSize - DEFAULT_SIDE * 2, DEFAULT_SIDE)
            image.graphics.endFill()
            image.buttonMode = true
            return image
        private function createWindowMask():Sprite {
            var image:Sprite = new Sprite()
            image.graphics.lineStyle(0)
            image.graphics.beginFill(0x000000, 1)
            if (isVertical)
                image.graphics.drawRect(0, 0, content.width + 1, windowSize)
            else
                image.graphics.drawRect(0, 0, windowSize, content.width + 1)
            image.graphics.endFill()
            image.alpha = 0
            return image
        //} endregion
And this is the ScrollEvent AS file:
package boppreh.ui
    import flash.events.Event;
     * Events related to the Scrollbar class.
     * Author: Lucas Boppre Niehues ([email protected])
     * Date: 09/02/2010
    public class ScrollEvent extends Event
        /// Dispatched when a scroll movement occurs
        public static const SCROLL:String = "scroll"
        /// Dispatched when the user has clicked and is holding an arrow or the bar
        public static const CONTINOUS_SCROLL_START:String = "continous scroll start"
        /// Dispatched when the user has clicked and dropped an arrow or the bar
        public static const CONTINOUS_SCROLL_STOP:String = "continous scroll stop"
        /// Dispatched when the user starts dragging the slider part
        public static const SLIDER_DRAG_START:String = "slider drag start"
        /// Dispatched when the user stops dragging the slider part
        public static const SLIDER_DRAG_STOP:String = "slider drag stop"
        /// Origin type representing the arrow up part
        public static const ARROW_UP:String = "arrow up"
        /// Origin type representing the arrow down part
        public static const ARROW_DOWN:String = "arrow down"
        /// Origin type representing the bar part
        public static const BAR:String = "part"
        /// Origin type representing the slider part
        public static const SLIDER:String = "slider"
        /// Origin type representing the keyboard
        public static const KEYBOARD:String = "keyboard"
        /// Origin type representing the mouse wheel
        public static const MOUSE_WHEEL:String = "mouse wheel"
        public var origin:String
         * Creates a new ScrollEvent object.
         * @param    type    the object type (first group of declared constants)
         * @param    origin    the object that originated the event (second group of declared constants)
        public function ScrollEvent (type:String, origin:String, bubbles:Boolean = false, cancelable:Boolean = false) {
            this.origin = origin
            super(type, bubbles, cancelable)
Any help would be appreciated. I've been stuck here all day.

Help needed with terminal and sudo

I recently had an awful time trying to upgrade to Mavericks from Mountain Lion. I couldn't do it, I got the gray screen with the logo and nothing else.
After a couple of days trying to sort it out I have gone back to Mountain Lion by restoring from my Time machine backup.
I was contemplating trying to install Mavericks 1 more time and tried making a boot disk using Lion Disk Maker. The process failed and I was getting the message, "Root is not in the sudoers file" When I've doe a bit more investigating it seems that there may be a problem with my sudo file.
When I tried to create the boot disk from the terminal I get the message that my user account is not in the sudoers file. My user account has full admin privileges.
Can anybody that understands the terminal please tell me what I need to do?
Thanks
John

John,
Since you cannot use sudo, corrective choices dwindle to either root (superuser) privileges, or reinstalling OS X. Apple has an assistance article on superuser. You should treat root privileges with the utmost respect, use it to solve this particular problem, and then resort only to sudo when necessary. My root is enabled and I never use it -- which begs for me to deactivate it.
The ownership on /etc/sudoers is root, wheel — and the permissions are 440 (-r--r-----).
Hopefully, you have a rudimentary vi editor knowledge, as the correct tool for editing the sudoers file is /usr/sbin/visudo.
There are only two active privilege lines in my /etc/sudoers file:
root
%admin
Hope this helps.

Help needed with Express and SQL Dev

Recently was asked to make a sql server application work with Oracle. I have never worked with Oracle products and no one in my small shop has either. I downloaded the Express 10g onto a virtual machine on my dev server and oracle SQL Developer locally. I have no idea how to connect to the Express db on the prod server using sql developer. I have tried Basic and TNS connection types and all the errors are very cryptic. Any help is appreciated. Do I need to install anything client side to connect to the server?
I figured it out. I had to use the Basic connection type and I DL'd the J2EE .
Edited by: jt_stand on Sep 25, 2008 10:51 AM

Had to use the Basic connection type and get the right combination of options. I can now connect to my remote Express server with my local sql developer program.

Help Needed With Mail and Reminders Vs. To Do Apps

I am running Yosemite 10.10.3 and IOS 8.2 on a Late 2012 Mac Mini.
I have been all over the place trying to find a perfect To Do List App that fully integrates with Mac Mail. I have versions of Things, Todoist, and Wanderlist that will work, but I have trouble tying them into my ICAL for meetings and reminders.
I am the kind of person who looks all over for a solution to a problem, when it might already be in front of me.
So, how can I take a Email and send it as a to do item to Reminders, or better yet, a section of an email and send it to reminders. I know from there it will automatically sync up to my iCloud and everything else.
I do not need anything over complicated, or have to share with anyone, so I have been leery of investing in Todoist or Wunderlist pro because I cannot seem to get this going.
I am hoping that the geniuses here at the Support Forums can help me out. I am wasting too much time and effort, trying things and having it not work. I have to believe that Apple has the solution right in front of me.
Thanks,
John

Have a look at this page which Google turned u:http://www.uwc.edu/itresources/OutlookExpressConfig/OutlookExpressSetup.htm
Whilst it's obviously for Outlook Express it contains all the details you need to configure the mail client. Point 5 has the server details for IMAP access (you typically can't access a web-based email account in an email client).
Bear in mind changes you make on the +iPod touch+ will be reflected when you next log-on into your web-based email or desktop email client.
regards
mrtotes

Help needed with flash and web service call

Hi all,
I need some help with web services and flash. I'm very new to flash, so please have that in the back of your mind when reading this :-)
I've got a .swf file, and I would like to display a number received from a web service (using adobe flash professional cs5). Ive added the web service and provided the WSDL, but when i try to "Add Method Call", nothing happens. Why? What am I doing wrong?
Hope someone can help

start with the button that causes the text to be displayed. find what it does (which may not be easy because most templates are coded by novice or intermediate level coders) and follow that trail to the text. (note: the text may be in a txt or xml file that's loaded.)
to have a button release open a file, use:
yourbtn.onRelease=function(){
getURL("http://www.adobe.com");

Help needed with consolidating and moving itunes folder.

Similar Messages

Maybe you are looking for