Help needed with reporting statistical internal orders

Dear experts,
I'm required to report Statistical, Real and Planned internal orders on a single report. I'm using infocube 0COOM_C02 for the same. While reporting Real and Planned internal orders, we can simply restrict key figure 0AMOUNT to Value Type to 10 and 20 respectively. I need to know if there's any value type for statistical internal orders? Can we extract the statistical internal order data using the standard extracters for this infocube or we'll need customized extractors. Please guide. Thanks a lot.
Regards,
Sumit

Hi Paolo,
Thanks for your reply. I think we can extract all internal orders using standard extractors but as far as reporting them is concerned, If we use cost centre not equal not not assigned, than we may report some real internal orders because many real orders may be associated with a cost centre. I'm a little confused here. A clarification will be much appreciated. Thanks a lot.
Regards,
Sumit

Similar Messages

Help needed with Report Design

Hi All,
Here is the requirement.
Period Type(holds 2 values) : Payment and Vested.
we have field 'Total Days' which is calculated based on "User Selected" Period Type.
For example, When Period Type is Payment,
If start date is less than or equal to grant date and end date is less than or equal to vest date, then calculation is (End Date - Grant Date)+1
If start date is greater than grant date and end date is less than or equal to vest date, then calculation is (End Date - Mobility Start Date)+1 (similarly 2 more if conditions) ...we have similar calculation for Period Type - 'Vested'.
This Period Type is a multiselect Prompt. How can this be achievable.
Any thoughts will be greatly appreciated.
Thanks.

I simply did as i got a tip on FB to do
quote from adobe themselves on facebook "Adobe Illustrator You might also want to try asking on our forums as there are many people that can help there as well! http://forums.adobe.com/community/illustrator/illustrator_general"
sry if it was wrong of me, simply thought there might be someone nice out there to give a helping hand
Date: Tue, 5 Jun 2012 13:41:48 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with a design!
    Re: Help needed with a design!
    created by in Illustrator - View the full discussion
This really isn't the place to ask for free services.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467790#4467790
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467790#4467790. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Illustrator by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with reporting API

Hi Guys,
ok i have tried many things but i just cant seem to get to grips with the "apireport.pl" tool provided to produce reports.
I have downloaded a fresh copy from ironport, only changed the Hostnames and primary_config files as needed, but no matter what i do i get the following error when i run the tool.
"Argument "--" isn't numeric in addition (+) at C:\Ironport reporting\apireport-1-0\apireport.pl line 264, <CSVFILE> line 2".
The othert thing is that the reports are produced but when you look at it the pie chart it just displays as a single state of all inbound mail being clean.
Any help or example scripts / config would be appreciated.
Thanks

I can now see that the report being produced IS only displaying the data for clean mail, hence the pie chart showing all mail clean, it just isnt displaying any other data but i dont know how to resolve this. When i look at the reports chart there is no data in the fields for anything other than clean mail so im presuming the process isnt either pulling in the data or processing it into the report
Any help would be appreciated thanks

Help needed with report grouping

Post Author: David Waugh
CA Forum: General
I have a summary report that has three groupings - The groupings areas follow:
Partner Group (Group1)Client Group (Group2)Actual Client (Group3)
For instance, there are 9 Partners, and each Client Group can/could have numerous Actual Clients.
The Details section is supressed. There are two parameter fields (Start Date and End Date). The summary is initally displayed at the Actual Client Group (Group 3) footer. Then there is a summary total on the Client Group (Group2) level, for all of those clients that are within that same Client Group.
I am able to sort all of the data at the Client Group (Group2) level either ascending or descending. In the Actual Client Group footer there is a Running Total for the Invoices billed during the period provided via the two parameter fields. Then there is an Invoice total for all of the clients that are within that same Client Group level (Group2).
I need to setup another parameter that will sort via Client Group displaying the top 25 Client Groups per Partner. Is this done via a Group Selection Formula?
Any help is appreciated.
Thank you,David

Post Author: Jagan
CA Forum: General
Have a read in the help about TopN and about the group sort expert.
Is there a reason you're using running totals rather than plain old summaries?

Help needed to report open orders from R/3 SD!

Hello all,
I need to report net open order value from SAP R/3 SD to BW. I'm using cube 0SD_C05 to report inquiry vs. quotation vs. orders. Is there any standard ods object in business content which can be used to report open orders? If not, will it be a good idea to create a ODS object and use it directly for reporting open orders? This BW installation is for a small IT company and we don't generate a lot of quotations or orders on a daily basis. Please guide.
Thanks and Regards,
Sumit

hi Sumit,
check if you can use 0SD_O01 - order item data
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/2b4f815f153014e10000000a114e5d/content.htm
other business content ods objects are 0sd_o02-05.
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/f5cc3c7dea9006e10000000a114084/frameset.htm
(expand left side 'ods')
hope this helps.

Report for internal order - year/period comparison

I want to create a report for internal orders with year/period (from/to) comparison.
For the present year/period i'm using CCA variables 1YRPERF (Fiscal Year/Period From) and 1YRPERT (Fiscal Year/Period To), created from field FISCPER, table RWCOOM.
Now i want to creat a column fot the n-1 period (example: if selected current period as 009.2013 to 008.2014 the n-1 period will be 009.2012 to 008.2013), any suggestion what can I do about this?
Regards
Carlos Aguiar

Hi Ajay
This is for higher education institution that have to report by fiscal year (01-12 months) and by academic year (09.year1 to 08.year2). I have two maps to do this but the challenge is to have a unique map that by dates could retreive both information.
I need a to have a column giving the total for example the Per/Yr 009.2012 to 008.2013 and other column with the Per/Yr -1.
I've tried your first option but doesen't work at all because don't work with a period like 009.2013 to 008.2014. Then i made some adjustments: first column was setted to Yr (variable: 6-GJAHV to 6-GJAHB) and Per (variables: 1NPERIV to 1NPERIB). The second column was setted with Yr (variable: 6-GJAH2 to 6-GJAH2) and Per (variables: 1NPERIV to 1NPERIB). Seems to work with a few tests!
Also i tried to creat new variables "1YRPERF" / "1YRPERT" to n-1, but had some problems with formula.
1YRPERF have a formula: '#S012-999' and 1YRPERT formula is: '#S012'.
To 1YRPERF-1 i've defined the formula '1YRPERF' -1, and for the Per to the formula '1YRPERT' -1, but seems to consider minus 1 period that the entry period. I've tried with -12 but didn't work too.
Thatk's for the help!
Regards, Carlos

Linking Sales Promotions to Statistical Internal Orders

We have two kinds of promotions here.
a) Consumer Promotion - reduced price for a particular period
b) Trade Promotion - Free goods - buy 10 get one free.
We are creating these promotion through standard SAP route with a validity period, and these get populated in the sales order order correctly.
The promotionional expenses are borne by the supplier (vendor). To debit his account with the appropriate expenses, we have created Statistical Internal orders (SIO) in CO, one per supplier account.
(We have developed a report where we accumulate all the values dueing these two above promotions and manually pass a JV in finance in the SIO.This is a long circuitous process and we are exploring other alternativesto make the values flow directly to the SIO)
If you double click on the sales order item, and proceed to Account Assignment tab, you will see an order no., where you can select the (SIO) no., which we are doing manually.
I am unable to find any place in configuration of Sales Promotion/Sales Deal/ SIO (definition) through which I can default the SIO no. in the sales order, so that the values can flow automatically.
Please help if possible.
Thanks & Regards
AN

I think that this is not possible.
Roberto

Regarding statistical internal order

hi guys i have following issue with internal order....
Statistical Internal Order - Used to track R&D dollars spent for different projects. The internal orders will not be settled - just for reporting purpose.
can n y one explain what is this all about.? can n y one help me solving it?
Thanks in advance

Hi Paru,
A statistical order means whatever posting goes to this order is only for information purpose. When you assign a stat. order in the document line item you will also have to assign the real cost object to carry cost to controlling. You can not distribute or settle these cost from the stat. order to another cost object because of the statistical status. If you require that cost after posting to order should be able to reposted to other cost object you have to creat the real cost order.
If you find this helpful please reward some points.
Js

Statistical Internal Orders - How can i charge to multiple cost centers

In the master data for the statistical internal orders, I am only able to enter one cost center in the 'Actual Posted Cctr' field. Is there a way to have multiple cost centers and the allocation % for each cost center (similar to the settlement rules on regular internal orders)?
thanks!

Hiya,
OKB9 works by assigning multiple Cost Centres to the Company Code + GL combination. However, I don't believe OKB9 is your solution - for the simple reason that you wish to post the information to multiple CCtrs, along with posting it to this Statistical IO.
In my opinion, you may have to delete the Actual Cost Centre assignment and, at the time of document posting, assign the True CCtr as well as this IO, or look for a User Exit that will trigger flows to multiple CCtrs along with this IO.
The other option is to make this a real posting to this IO (change the IO from statistical to real), and then settle this cost to multiple CCtrs. As long as it stays statistical, you don't have the liberty of settling the cost.
Hope this helps.
Cheers.

Statistical Internal Order on a Purchase Order

Hi,
We are trying to use a statistical internal order on a purchase order along with a real cost center. But we are unable to get the internal order to show up on the FI documents being posted using goods receipt.
Purchase Order has been created with 'F" (order) as the account category. On the account assignment tab we have maitained an expense cost element & real cost center & statistical internal order.
Internal order master data has been created with just the company code and object class as OCOST.
Please let me know what we are doing incorrectly and how can we have the statistical internal order show up on the FI document.
Thanks,
Venkat

Hi Venkat,
Statistical Internal order doesn't work if GL account used is not a cost element. You need to make your GL account as cost element. If the respective GL account doen not need to be cost element then you can make it statistical cost element with category 90. In this case it'll not ask for CO object or it'll not create any error or issues.
Hope it'll work.
Thanks,
- Mahak
Edited by: Mahak Birla Mantri on Jun 15, 2009 11:34 AM

Goods Issuance against Statistical Internal Order

Dear Sir,
We need to monitor the expenses against a particular activity . For this we had opened an Statistical Internal Order . Pl guide us as what steps need to be followed for Issuing of Material (MB1a) , against the Statisical Internal Order reference .
I will be highly obliged for the kind help pl .
Rgds
Sonia Agarwal

Dear Mr Manish
Thanks for reply .
During MB1a , movement 261 after giving Internal Order , System is asking for the Cost Center also . I desire that Cost Center should come automatically from Internal Order . As in KO01 , I have already mentioned the Responsible Cost Center for this Internal Order .
Kindly help us pl .
Rgds
Sonia Agarwal

Plan data on Statistical Internal Order

Dear gurus,
Presently we have real internal orders for the projects but now we are diverting from real Internal Order to Statistical Internal Order. Before we use to plan data on the real internal order. My concern is by changing the IO to statistical, would it impact on the Plan data? How can we approach the Planning data in the statistical Internal Order?
Also while creating Statistical Internal Order, the system does not allows to select Plan-Integrated Order field. What is the signficance and by not selecting this field, this does impact the plan data on the statistical IO
Thank you in advance
Regards

Diverting to Statistical order,system will not allow you make settlement. if you need only for information purpose, then u can adopt the statiscal order.
System will not allow to select statistical indicator & Indicator for Integrated Planning. you will only select one option. u can only select with real indicator
by selecting the "Indicator for Integrated Planning"activity inputs planned are updated
directly on the sending cost center if 'Integrated planning with Cost Center Accounting' is activated in the version. You can then also settle plan-integrated orders/projects to cost centers.which only possible with Real order
I hope this will be helpful

Change cost center in statistic internal order

Hello all,
I have got a problem with the master data of our internal orders. We´ve defined them as statistic objects, and the information of the cost center is an obligatory input within the master data of each internal order. After the first entry has been done the cost center can not be changed anymore. Now we have the necessity to change the cost center in all our internal orders once. Could you help me to find a solution how the cost center remains a changeable input in the master data of a statistic internal order? Or how I may change the cost center just once?
Thanks for your help.
Best regards,
Bettina

Dear Sir,
The field is greyed off if the following is applicable:
-> the order has planned or posted entries
-> you have created a settlement rule on it.
If you want to have the field to be changable, please apply the modification note 198036
regards
Waman

Account assignment category to be used in ME21N -Statistical internal order

Hi Gurus,
I have assigned budget(KO22) for a statistical internal order for budget controlling purpose.
Now I wanted to create a PO in ME21N, so that it should commit that amount in statistical internal order.
As the expenses GL account is used i have to give a cost center, and i have to give this statistical internal order also. So that when booking exceeds the budget amount in statistical order it should display error message.
I tried creating PO with Account assignment group 3 (Cost center +internal order valuated), and i can not see any records in KOB2 or in the report S_ALR_87012993. PO is created even when the PO amount exceeds budget amount.
However it is not allowing invoice posting when exceeding budget.
Can you please tell me with what account assignment group i have to create PO, so that the PO should not be created when the net price amount exceeds statistical internal order amount.
Thanks & Regards,
Diva

Hi
Pls verify the following links and correct your settings
http://forums.sdn.sap.com/thread.jspa?threadID=1886939
http://forums.sdn.sap.com/thread.jspa?threadID=1968328
http://forums.sdn.sap.com/thread.jspa?threadID=1266987
Reg
Vishnu

Creation of Statistical Internal Order

HI
Can any one help me how to create statistical internal order? including configuration steps.

Hi
When you create IO, in the 2nd tab there is a check box for statistical order.. Check it and your order would become statistical
Else, in the Config, T code KOT2_OPA... Choose your order type, and click on "Field selection" in your order type... This button is towards the lower left of your screen
Make "Identifier for statistical order" as required entry in the next screen that opens.. With this, your IO will be by default statistical whenever created using this order type
Ajay M

Help needed with reporting statistical internal orders

Similar Messages

Maybe you are looking for