Help on error : OIP-04902 - Invalid buffer length for LOB write op

We have a bit of VBA in Excel 2003 writing a BLOB to an 11.2.0.2 DB; for certain users it is throwing up the above message. I can't find any useful info on it; does anyone know the causes/resolution please ?

Resolved - a 0 byte object was being passed, which caused the error.

Similar Messages

  • ORA-28232: invalid input length for obfuscation toolkit

    hi,
    i am facing this error when i enterd more then 8 charecter in the input string.
    ORA-28232: invalid input length for obfuscation toolkit
    why i cant user more then 8 charecter for password.?

    Rajnish Chauhan wrote:
    hi,
    i am facing this error when i enterd more then 8 charecter in the input string.
    ORA-28232: invalid input length for obfuscation toolkit
    why i cant user more then 8 charecter for password.?
    28232, 0000, "invalid input length for obfuscation toolkit"
    // *Cause:  Length of data submitted for encryption or decryption is not a
    //          multiple of 8 bytes.
    // *Action: Make sure that the length of the data to be encrypted or decrypted
    //          is a multiple of 8 bytes.since you did not share with us exactly what you did, we can say exactly what you did wrong.
    How do I ask a question on the forums?
    SQL and PL/SQL FAQ

  • Network Stream Error -314340 due to buffer size on the writer endpoint

    Hello everyone,
    I just wanted to share a somewhat odd experience we had with the network stream VIs.  We found this problem in LV2014 but aren't aware if it is new or not.  I searched for a while on the network stream endpoint creation error -314340 and couldn't come up with any useful links to our problem.  The good news is that we have fixed our problem but I wanted to explain it a little more in case anyone else has a similar problem.
    The specific network stream error -314340 should seemingly occur if you are attempting to connect to a network stream endpoint that is already connected to another endpoint or in which the URL points to a different endpoint than the one trying to connect. 
    We ran into this issue on attempting to connect to a remote PXI chassis (PXIe-8135) running LabVIEW real-time from an HMI machine, both of which have three NICs and access different networks.  We have a class that wraps the network stream VIs and we have deployed this class across four machines (Windows and RT) to establish over 30 network streams between these machines.  The class can distinguish between messaging streams that handle clusters of control and status information and also data streams that contain a cluster with a timestamp and 24 I16s.  It was on the data network streams that we ran into the issue. 
    The symptoms of the problem were that we if would attempt to use the HMI computer with a reader endpoint specifying the URL of the writer endpoint on the real-time PXI, the reader endpoint would return with an error of -314340, indicating the writer endpoint was pointing to a third location.  Leaving the URL blank on the writer endpoint blank and running in real-time interactive or startup VI made no difference.   However, the writer endpoint would return without error and eventually catch a remote endpoint destroyed.  To make things more interesting, if you specified the URL on the writer endpoint instead of the reader endpoint, the connection would be made as expected. 
    Ultimately through experimenting with it, we found that the buffer size of the create writer endpoint  for the data stream was causing the problem and that we had fat fingered the constants for this buffer size.   Also, pre-allocating or allocating the buffer on the fly made no difference.  We imagine that it may be due to the fact we are using a complex data type with a cluster with an array inside of it and it can be difficult to allocate a buffer for this data type.  We guess that the issue may be that by the reader endpoint establishing the connection to a writer with a large buffer size specified, the writer endpoint ultimately times out somewhere in the handshaking routine that is hidden below the surface. 
    I just wanted to post this so others would have a reference if they run into a similar situation and again for reference we found this in LV2014 but are not aware if it is a problem in earlier versions.
    Thanks,
    Curtiss

    Hi Curtiss!
    Thank you for your post!  Would it be possible for you to add some steps that others can use to reproduce/resolve the issue?
    Regards,
    Kelly B.
    Applications Engineering
    National Instruments

  • Error in determining country specific length for account number

    Cannot determine country-specific length for account number;No instance of object type AccountClosureAM has been created. External reference: 0271409168GTABNGODUMMY00USDGO

    Thanks KI & Sujit
    Can you please tell me the Menu Path for OB40
    I have one another problem as below
    Jurisdiction code not defined for procedure TAXINN
    Message no. FF748
    Diagnosis
    You have entered a jurisdiction code in a country whose calculation procedure does not allow the entry of jurisdiction codes.
    System response
    Procedure
    Check and, if necessary, correct the entry.
    Procedure for System Administration
    If it is not an input error, check and possibly change the system settings.
    To do this, choose Maintain entries (F5).
    Change your calculation procedure so that tax calculation is carried out using the jurisdiction code.
    Can you please tell me how to solve this.
    Rakesh

  • Help with Error: Jcarousel: No width/ height set for items....

    Hey everyone.  I have a user that is using a Tour and everytime he opens up a site like ESPN he receives the following error:  Jcarousel: No width/ height set for items. This will cause and infinite loop. Aborting…  I had him pull his battery but this did not work.  I have tried to search the forums and google, but I have yet to find anything concerning Blackberrys.  He is on V 4.7.140.  I'm not sure what the current version of the Tour software is, but I can definately try updating it to see if this solves the problems.  Before I do this though I wanted to see if anyone here had any ideas or has ran into the same problem.  Thanks for the help.

    What are you talking about? The width/height of what? Is this some sort of error message? If so from what?

  • Error message ArgumentError: Invalid character length everytime I try to upload form to Forms Centra

    Spent a whole day on the phone to Adobe 'experts' on Friday and still having the same error message. No one can explain why I can't upload my forms to FormsCentral. They even looked at my form and didn't advise of any error in the setup of the form. I thought perhaps the file name was too long, shortened it but to no avail.
    Is there a limit on characters you can set in form fields that I don't know about but should know about? Some of my form fields have been restricted to 17,000x characters.

    You ran in to typical help you will receive Adobe help and Chat.
    All help except for these User to User Forums, are Manned solely by, Farmed out Foreign workers that barely have any Grasp of of English, haven't been forced to learn the language and take diction classes in the language they are charged with support.  and have no experience with the product they are given to support. They given scripts with possible questions and possible answers. If the questions or answers are not on the list, then your out of luck. You much better off coming here.
    Support workers regardless of Country of Origin should be:
    Schooled in the language and take diction classes for the language they are charged with to support.
    They should have a Minimum of 5 years experience with each product they support and know every detail and  and idiosyncrasy of the program they are charged with to support. They should be costantly reschooled for each new feature, removed features and other changes of each new version.
    If they don't do that then they should quit support and cut prices by 2/3s because there is no support. No support is better than "half-hearted" support. (I wanted to say something more strong but figured I'd get censored).

  • Help~ Link error in pro*c (10g EE for win32)

    Hi Sir,
    I have downloaded the 10g EE database from ORACLE homepage...
    There are orasql10.lib (in /precomp/lib) and orasqx10.lib ( in /precomp/lib/msvc).
    I linked the both of them, but there is link error..as follows..
    -----------------------------------------------------------------------------------------------------------insertTest.obj : error LNK2001: unresolved external symbol "void __cdecl sqlcxt(void * *,unsigned int *,struct sqlexd *,struct sqlcxp const *)" (?sqlcxt@@YAXPAPAXPAIPAUsqlexd@@PBUsqlcxp@@@Z)
    ../../../bin/insertTest.exe : fatal error LNK1120: 1 unresolved externals
    Error executing link.exe.
    source code is very simple
    void main()
    EXEC SQL include sqlca;
    EXEC SQL BEGIN DECLARE SECTION;
    char *uid="sys";
    char *pwd="manager0";
    EXEC SQL END DECLARE SECTION;
    EXEC SQL CONNECT :uid IDENTIFIED BY :pwd;
    printf("\nConnected to ORACLE as user: %s\n", uid);
    exit(EXIT_SUCCESS);
    Help me~~
    Thank you...

    Works for me. Please post complete step-by-step log of the commands you executed, like below:
    C:\>type test.pc
    #define EXIT_SUCCESS 0
    #include <stdio.h>
    EXEC SQL INCLUDE SQLCA;
    void main()
        EXEC SQL BEGIN DECLARE SECTION;
        char *uid="/";
        char *pwd="";
        EXEC SQL END DECLARE SECTION;
        EXEC SQL CONNECT :uid IDENTIFIED BY :pwd;
        printf("\nConnected to ORACLE as user: %s\n", uid);
        exit(EXIT_SUCCESS);
    C:\>
    C:\>proc test.pc
    Pro*C/C++: Release 10.2.0.1.0 - Production on Thu Mar 9 08:23:49 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    System default option values taken from: C:\oracle\ORA10GR2\precomp\admin\pcscfg.cfg
    C:\>cl test.c c:\oracle\ORA10GR2\precomp\lib\orasql10.lib
    Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 13.10.3077 for 80x86
    Copyright (C) Microsoft Corporation 1984-2002. All rights reserved.
    test.c
    Microsoft (R) Incremental Linker Version 7.10.3077
    Copyright (C) Microsoft Corporation.  All rights reserved.
    /out:test.exe
    test.obj
    c:\oracle\ORA10GR2\precomp\lib\orasql10.lib
    C:\>.\test.exe
    Connected to ORACLE as user: /
    C:\>

  • Invalid Key Length  Volume check failure

    I have a G4 with 768 Mb of Ram and originally ran as a dual boot system with OS9.2.2 and OSX 10.2. I attempted to upgrade to Tiger. The install kicked out twice. I then re-formatted the hard drive and installed again. I have tried running Disk First Aid, re-booting on Tiger CD, and it gives me an error message.
    Invalid Key Length
    Volume Check Failed
    ERROR: The underlying task reported failure on exit.
    1 HFS volume checked
    1 volume could not be repaired because of an error.
    HELP!!!
    Tried booting on a Norton Utilities disk but it repeatedly also locked on an error.
    Erased disk and attempted again, still no good.
    Finally went back to OS10.2.8 and am up but with still the same error if I run Disk First Aid.

    Welcome to Apple Discussions!
    Norton Utilities is not compatible with Mac OS X 10.2, and will actually cause these Invalid Keylength issues. They stopped supporting Mac OS X nearly two years ago, and even when they did it was Russian Roulette using their software.
    Remove it.
    The first utility software you should always use is a backup utility. Other utilities can supplement backups but should never be used instead of having a backup:
    http://www.macmaps.com/backup.html
    If erasing your hard drive and not installing any third party software upgrading back to 10.2.8 and not having any third party devices connected yielded an invalid keylength, either your 10.2 installation disk is damaged, or is the wrong 10.2 installation disk to use, or the hard drive or its connectors are bad. Try to determine which it is by process of elimination.
    Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

  • RoboHelp Server 7 Help System Errors

    Whenever I publish my RH 7 Help project to server, I check
    the RoboHelp Server Web Administrator for errors. I always get Help
    System Error "Requested file cannot be found" for a file called
    bsscfp.txt. To my knowledge, this is a control file generated
    during the publishing process. If this is the case why is an error
    being generated for a file I have no control over? Also, I find the
    Troubleshooting section of RoboHelp Server Web Administrator to be
    rather useless in correcting issues. Is there any reference
    documentation that explains some of the cryptic error messages that
    appear in the Server Web Administrator screen?

    Hi, ouque and welcome to the forum.
    Just to clarify your setup. When you say "Project pane" are
    you referring to the Configuration Manager on the server itself.
    Or, are you referring to something you are seeing from the RoboHelp
    authoring client app's Server Administration pane?
    If you have access to the actual server desktop and view the
    Configuration Manager, sometimes on a new installation, you can do
    a "refresh" and the project will show up.
    A few more questions:
    Have you tried accessing the website and does the project
    come up in the web browser?
    On what kind of web server did you install RHS7? Windows
    2003, etc.?
    Is Microsoft Indexing Services turned on?
    Apparently you were able to successfully publish your project
    to the server so there is "communication" between your desktop and
    the server I gather.
    A few more details and we'll try to help.
    Thanx,
    john

  • Error - Invalid parsing schema for current workspace id

    Hello,
    Users logging into an application occasionally get a strange error: ORA-20104: create_collection_from_query_b Error:ORA-20001: Invalid parsing schema for current workspace ID.
    The error occurs during a post authentication process. Does anyone know what could cause these in general or why it might only occur during the first login of the day?
    Regards,
    Dan
    http://danielmcghan.us/
    http://sourceforge.net/projects/tapigen/

    Scott,
    Today the error mentioned in the last post occurred 3 times - the highest number in a single day yet. Also, to add to the dilemma, a new one occurred:
    ORA-20104: create_collection_from_query_b Error:ORA-20101: Application collection exists
    Knowing that the create collection process is called from a post authentication process I don't see how that the collection could exist for that session... Any ideas?
    Regards,
    Dan
    http://danielmcghan.us
    http://sourceforge.net/projects/tapigen

  • Error using transferTo function on VMS for long files

    Here is the code snippet that fails, as you can tell I am not giving all the code since it is not required to understand the problem.
    This occurs on OpenVMS
    Welcome to OpenVMS (TM) Alpha Operating System, Version V7.3-2
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition
    Classic VM (build 1.4.2-5, 03/06/2006-23:29, native threads, nojit)
    The error only occurs on files with very long line lengths (20 000+ characters in the line) and file size is not an issue.
    Thanks in advance for your help in resolving this issue.
    private FileChannel fileChannelInbound;
    private SocketChannel socketChannelOutbound;
    private Socket client;
    client = new Socket(hostname,portNumber);
    socketChannelOutbound = SocketChannel.open(client.getRemoteSocketAddress());
    File fIn = new File(file);
    fileChannelInbound = new FileInputStream(fIn).getChannel();
    fileChannelInbound.transferTo(0,fileChannelInbound.size(),socketChannelOutbound);
    fileChannelInbound.close();This is the trace of the error.
    java.io.IOException: invalid buffer length
    at sun.nio.ch.FileDispatcher.write0(Native Method)
    at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java)
    at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java)
    at sun.nio.ch.IOUtil.write(IOUtil.java)
    at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java)
    at sun.nio.ch.FileChannelImpl.transferToTrustedChannel(FileChannelImpl.java)
    at sun.nio.ch.FileChannelImpl.transferTo(FileChannelImpl.java)
    at WebReturnResult.sendFile(WebReturnResult.java)
    at WebReturnResult.sendResults(WebReturnResult.java)
    at WebReturnResult.<init>(WebReturnResult.java)
    at WebReturnResult.main(WebReturnResult.java)

    Hi ,
    Unfortunately this is an issue in the underlying driver for the USB device. It should be fixed in the next DAQ release.
    One way you could work around this problem is by having a delay after the read and the next line of code.
    i.e
    Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
    DAQmxErrChk DAQmxReadAnalogScalarF64(taskHandle, 10#, data, ByVal 0&
    Sleep(250)
    acquisitionDataTextBox.Text = CStr(data)
    Hope this helps...
    Nandan Dharwadker
    Staff Software Engineer
    Measurement Studio Hardware Team

  • DRG-10705: invalid value 149 for attribute TYPE_ID

    When doing a call to the procedure ctx_report.index_stats on one of my index, I get a DRG-1075 and the procedure fails. I don't think it is data related because I can reproduce the error on multiple databases with different datasets. It is specific to the index I am analyzing though, I don't have the error on another domain index. A rebuild did not help.
    There is nothing in metalink or elsewhere about that error, I don't really understand it.
    If someone has a clue, it is welcome
    ERROR at line 1:
    ORA-20000: Oracle Text error:
    DRG-10705: invalid value 149 for attribute TYPE_ID
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.CTX_REPORT", line 534
    ORA-06512: at line 4
    Regards,
    Pierre

    Thanks a lot for the answer, I have been under pression because of deadlines but I'll focus on this problem next week.
    We have a serious performance issue with a text index on a XMType column (the index is very big one, 14G). The only way to get decent performance is to pin the DR$ I table in memory, but I had a bad surprise : when one do a ctx_ddl.optimize_index with rebuild the index becomes much bigger (from 14G to 18G) and so it does not fit in the keep cache anymore. A rebuild or a drop/create put back the index to the original size. I suspect that some storage options are changed but could not understand which. I'll do a test case and post it on this forum.
    That's why I wanted the ctx_report.analyze_index but it fails (even when the base table is truncated, so you might be right, there could be a leftover from a previous index). I'll set-up a test case with a freshly created database.
    The product manager, Richard Ford, wrote a white paper about putting the index in the keep cache, it makes a very big difference for us. But I think it should be adapted to the Oracle 12c case (with separate offset and BIG_IO for example).
    I'll post the test case asap, thanks already for pointing me to the right direction.
    Pierre

  • Max buffer size for HDS streams

    How does OSMF (v2.0) compute the max buffer length for HDS streams (pre-recorded)?
    I have  mediaPlayer.bufferTime = 5 seconds, but I see that even on very good b/w connections, the buffer length does not exceed 7.5 secs. Is there a way to increase the maximum buffer length value, so that clients on higher b/w can accumulate a larger buffer?
    By comparison, for RTMP, the buffer length seems to go up to 60sec which is consistent with what the docs say here:
    http://livedocs.adobe.com/flashmediaserver/3.0/hpdocs/help.html?content=00000175.html
    Thx,
    - abey

    No. Did not find a way to set the maxBuffer value, but I was able to workaround the problem by setting the mediaPlayer.bufferTime dynamically (i.e different values for various stages of playback, like loading, seeking, buffering, normal playback etc.)..So setting bufferTime to 60 secs during normal playback allows the buffer to grow to a decent size.
    - Abey

  • DeliveryException: invalid content type for SOAP: TEXT/HTML

    My scenario is RFC -> XI -> SOAP (synchronous), but when I test this scenario, I got the error message "DeliveryException: invalid content type for SOAP: TEXT/HTML", I search the document and change it following this blog: /people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
    1. I add a MessageTransformBean module before the original one
    2. I add a transform key, the value is text/html;charset=utf-8
    But when I active this channel and test again, I got another message:
    XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION-HTTP 400 Bad Request.
    I only find one discussion about it but I still have no idea how to solve the problem. Do I need to change my mapping ? And when field should I generated in the mapping?
    Problem with SOAP receiver adapter

    And of course you have also applied the correct SOAPAction.
    Sorry for bothering you, but is difficult to guess the error, but in my experience, must issues are due to wrong configuration.
    Could you check with TCPGateway, what error is sent back?
    /people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway
    Regards
    Stefan

  • Checkbox and ORA-20507: Invalid numeric value #:# for column

    Hi All,
    I'm facing problems Checkboxes in a form.
    I created a form and report on a table. one of the fields on the form is a checkbox and when ever I want to create a new record or update with more than one value for the checkkbox I obtain the following error:
    ORA-20507: Invalid numeric value #:# for column COLUMN_NAME Where by #:# is numbers
    I think the error occurs at the processes of get_pk and process_row_of_......
    how should I change the processes to accommodate the checkbox values.
    Kind regards
    Mel

    Hi Roel,
    Colunm = number
    LOV Definition
    select product display, prod_num return from product_category_vw
    where prod_num not in (select p.prod_num from product_user_tb p, user_tb u
    where p.user_num = u.user_number
    and u.user_name = :APP_USER)
    ORDER BY 1column = number
    LOV Definition
    select school d, sch_id r from school_tbRegards
    Mel

Maybe you are looking for