Help on Join AP with Order_Lines

Hi Gurus,
How to join AP Invoices with Order Lines. I am trying to get order number from order_lines and Invoice number from AP_Invoices
Regards

792011 wrote:
Hi Gurus,
How to join AP Invoices with Order Lines. I am trying to get order number from order_lines and Invoice number from AP_Invoices
RegardsAre you referring to a particular Oracle product (pre built database)? this forum is for SQL and PL/SQL questions, so a lot of people here work at the low level end of the coding, not with those products.
If that's the case, just let us know so we can stop looking at it here, and go post your question in the correct product forum.

Similar Messages

Can I join Structure with Z table ?

Can I join Structure with Z table?
If yes...plz explain me with an example.
PLease provide me with an example to join a structure with a Ztable...
Any help would be appreciated...
Regards,
Krishna Chaitanya

Hi Chitanya,
It is possible to add fields in the form of structure to a Z table.it can be done in the form of Include or Append structure.There are no other ways to join structure to the table upto my knowledge.
if it useful, reward points.
Thank u,
Prasad G.V.K

How can i join PO with GRPO

Hi,
I make query as belown to join PO with GRPO.I wnat to calculate Quantity from PO to GRPO but in my query it show duplicate record i also use distinct but useless.My query as below.
SELECT T1.DocNum [PO No], T1.DocDate [PO Date], T3.ItemCode, T3.Dscription, T3.U_CostCentre, T3.DocEntry [GRN No], T0.DocDate [GRN Date],T3.Quantity'GRIR Quantity',T2.Quantity 'PO Quantity',
T3.Quantity-T2.Quantity 'Balance Quantity'
FROM OPDN T0 , OPOR T1, POR1 T2, PDN1 T3
WHERE T1.DocEntry = T2.DocEntry
and T0.Docnum = T3.Docentry
and T3.BaseRef = T1.DocNum
and T2.ItemCode = T3.ItemCode
and T3.DocDate between [%0] and [%1]
Can any body help in this regards.
Sohail Anwar Ali

Hi Sohail,
As i understand, you want to know till now how much of quantity stills needs to be delivered, in that case instead of trying joining two tables i would suggest to try this query which gives you
Purchase Order Document No,
Purchase Order Date,
Vendor Name,
Item Code,
Item Description,
Ordered Quantity,
Received Quantity,
Open Quantity.
as the filed OpenQty stores the Quantity yet to receive for that particular Purchase Order. As this approach is much more flexible
Query
SELECT T0.DocNum, T0.DocDate, T0.CardName, T1.ItemCode, T1.Dscription, T1.Quantity,
(T1.Quantity-T1.OpenQty) as "Recevied Quantity",
T1.OpenQty FROM OPOR T0 INNER JOIN POR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.DocDate >=[%0] and
T0.DocDate <=[%1]
I hope this helps out your issue
regards,
Shreyas

How can I join PRPS with DRAD?

Hi,
I would like to join the table PRPS and DRAD in order to see all documents linked to a certain PSP. I tried to join DRADOBJKY with PRPSPSPNR but it doesn't work since the OBJKY is different from the psp-number. If I'm doing this with MARA~MATNR it works. Strange. can someboy help me?
Thanks

Hello,
Can you check if PRPS-OBJNR = DRAD-OBJKY ?
If this is not successful, then use the conv. exit CONVERSION_EXIT_ABPSP_INPUT, pass the PRPS-OBJNR get the internal number.
Now check that this internal number matches with DRAD-OBJKY.
Plz revert back.
BR,
Suhas

Join table with additional data

Hi,
I'm new to JPA (Toplink Essentials) and I'd like to know how to handle this situation:
I have ORDER table, ITEMS table and "join table" ORDER_ITEMS which holds refernces to ordered items with quantity of each oredered item.
Many thanks

I did mapping as shown in listing. It works for reading, but for writing JPA returns error. Can somebody help?
Thanks
[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Column name 'idexpedice' appears more than once in the result column list.
Error Code: 264
Call: INSERT INTO vklad_expedice (IDEXPEDICE, IDVKLAD, VAHA, idexpedice, idvklad) VALUES (?, ?, ?, ?, ?)
bind => [null, null, 0, 4411, 2]
@Entity
public class Expedice implements Serializable {
@Id
@GeneratedValue(strategy = GenerationType.IDENTITY)
private Integer idexpedice;
@Temporal(TemporalType.DATE)
private Date datum;
@OneToMany(fetch = FetchType.EAGER, mappedBy="expedice", cascade = CascadeType.ALL)
private List<ExpediceVklad> vklady;
@Entity
public class Vklad implements Serializable {
@Id
@GeneratedValue(strategy = GenerationType.IDENTITY)
private Integer idvklad;
private String nazev;
@Entity
@Table(name = "vklad_expedice")
@IdClass(ExpediceVkladId.class)
public class ExpediceVklad implements Serializable {
@Id
private Integer idexpedice;
@Id
private Integer idvklad;
private Integer vaha;
@ManyToOne
@JoinColumn(name = "idexpedice")
private Expedice expedice;
@ManyToOne
@JoinColumn(name = "idvklad")
private Vklad vklad;
public class ExpediceVkladId {
@Id
private Integer idexpedice;
@Id
private Integer idvklad;
SQL tables
EXPEDICE
idexpedice
datum
VKLAD
idvklad
nazev
VKLAD_EXPEDICE (this is the join table with additional column)
idexpedice
idvklad
vaha
Edited by: user10933983 on 31.3.2009 13:47

How to join GRPO with AP invoice thru query ?

hi all,
How to join GRPO with AP invoice in sql query ?
Jeyakanthan

Hi Jeyakanthan
Are you using query in SAP Business One or outside the system? If you select the tables in SAP Business One as OPCH and OPDN then no inner join will appear, as the links sit on the line level. You will need PCH1 and PDN1. The link can be found in both directions, but bear in mind that 1 AP Invoice could be based on more than 1 Goods Receipt PO. For this reason the best approach is to start at the AP Invoice line level and use the BaseType and BaseRef fields to view which lines were pulled from which Goods Receipt PO's.
Kind regards
Peter Juby

I am having a problem with pop pups and small windows with ads constantly opening up on my safari?? Thought that macs didn't get virus? this looks like one- any experts around? please help me fix it with your instructions? really don't know what to do...

Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanks

Those are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

HT4623 Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?

Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?
I don't want to lose all my pics, songs etc
Whats my next move as I CANNOT use the ipas at the moment!!!!!!!!

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

Looking for a reading App. iPad (iOS 7.1.2) - Kindle. I am looking for a good app that can help a college student with reading books that cannot be found on audio book. Voice over works, but monotone!

Looking for a reading App.
iPad (iOS 7.1.2) - Kindle.
I am looking for a good app that can help a college student with reading books that cannot be found on audio book. I have tried voice over and it works but it's very monotone and it really strings things together.
- I'm willing to pay for a good app but I can't seem to sort though the many that are out there. Any suggestions.

Ah. I'm surprised, but there we go.
Have a look here ...
http://jam.hitsquad.com/vocal/about2136.html
(courtesy of googling 'OSX free multitrack recording software')
Didn't have time to do more than skim, but 'Ardour' looked promising. Protools is the only one I've used, the full product is one of the industry standards, but the free 'lite' version listed here seems to be limited to 2 in/out as well.
Referring to your original post, I'd think trying to write or 'script' something would be a nightmare ... synchronisation of streams within something like Applescript would be a major issue, quite apart from anything else.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

My iPad Air 16 gb wifi not open and asking for an address and not mine and I am the owner of this device and I can not pave if there is a possibility of me to help me open it with my address as I opened before

asking for an address and not mine and I am the owner of this device and I can not pave if there is a possibility of me to help me open it with my address as I opened before

Read the following about, "Activation Lock".
http://support.apple.com/kb/ht5818

I have an ipod 2g , The keyboard won't work! Or at least some of it's letters and numbers won't. please help i'm stuck with emojis

i have an ippd touch 2g , a part of my keyboard won't work , i can type letters but i can't type numbers . please help i'm stuck with emojis keyboard

Try restarting the iPod by holding down the lock and home button together and then slide the power button to turn it off and then wait 10 seconds and start it up again. If it is not a reset issue then it may be a hardware issue. Is your iPod damaged or have you dropped it recently? If it is a hardware problem then you may not be able to fix it. If your iPod has multitasking options like the new iOS devices, close out the app and then try again, it should reset your device to letters instead of emojis.

Did ios7.4 help the ipad sync with itunes

did the update of ios 7.4 help the ipad sync with itunes - songs not playing

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

Does INNER JOIN work with Oracle 8i ? (ORA-00933)

hi,
I try to execute the sql:
SELECT
A0.FULL_NAME,A0.MANAGER_ID,A0.DEPT_NO,A0.TOP_DEPT
FROM
HR_ORG A0
INNER JOIN
HR_EMP A1
ON
A0.MANAGER_ID=A1.EMP_NO
WHERE
A1.NAME = 'michael'
but I caught an exception:
java.sql.SQLException: ORA-00933: SQL...(message in
chinese)
Does INNER JOIN work with Oracle 8i ?
thanks.

INNER JOIN syntax is introduced in 9i, it does not exists in 8i. You can rewrite your statement:
SELECT
A0.FULL_NAME,A0.MANAGER_ID,A0.DEPT_NO,A0.TOP_DEPT
FROM
HR_ORG A0
, HR_EMP A1
WHERE
A0.MANAGER_ID=A1.EMP_NO
AND
A1.NAME = 'michael'

How can we create a Collective search help plz tell me with steps

How can we create a Collective search help plz tell me with steps
thanks,
basu

Hi
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points for useful Answers
Regards
Anji

How do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?

qHow do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?

For what it is worth I have noticed a similar issue from the iPad3 while at work and home. At work we have two Apple TV 3rd Generation installed and tied to our A/V system. I believe the issue has to do with a timeout on the broadcast saying "here I am" and allowing devices to connect.
For example:
At work we have several Wi-Fi SSID being broadcast from Cisco APs. The only one we can use with the Apple TV is the one that uses a WEP since the others are either setup to be hidden, require web page authentication, or have a login requirement from employees. Essentially, what I believe the issue is that the Apple TV periodically broadcasts a message to other iOS devices that support Mirroring. When the Apple TV does not get a response from a device it goes into a dormant mode and requires either a command from the remote control or a reboot. This has been tested with both the power management enabled and not enabled with the same results.
As for when I come home, the Apple TV3 has not seen the device in some time and therefore is not broadcasting it's location information. A simple click of the circle or menu keys on the remote will give it the command to start broadcasting again and allow the iPad3 to see the Apple TV. When trying to Home Share the computer can not play (iTunes 11, Win8RTM) until the Apple TV is awoken then it will show up for mirroing.
This may or may not assist you but, it hopefully explains how the issue may be happening.

Help on Join AP with Order_Lines

Similar Messages

Maybe you are looking for