Help, permissions and privileges issue.

Hi to all,
Suddenly a few days ago, quitting Photoshop I received the following warning: "+Preferences can not be saved because you do not have necessary privileges+". Quite strange ... I'm using PSD since long time.
So, going to see the privileges settings for PSD's preference file, I've found the set in this order:
(Group) Everyone -> custom
(User) me ............ -> +Writing and reading+
(Group) Everyone -> +only reading+
So simply deleting this "bad" preference file, I had not problems anymore. And then I got the new PSD's pref file with just me as user and the group everyone. Ok.
Then I ran a "repair privileges" without finding out any problems a part with a couple of JavaWM files.
Unfortunately then I found that many applications gave similar permissions' troubles. In other words, I can't update my preferences' files. And if I check these files I always find a double groups "everyone": the first one with "custom", the other one only "Reading" (and me as user with w-r).
Opening an app that gave preferences error warning, I tried to assign for the group everyone-custom the Read and write permissions and reopening that app everything was fine. But it's not a right solution, I know.
So at this point I don't know how to solve my problem. Surely I cannot delete all my preferences' files !
I have a recent "good" backup. I could restore the entire Preference folder. But maybe is there a better way ? Or is there any other check to prevent a similar very annoying issue ?
Thanks and cheers,

Great.
Searching and reading in this forum, I found another post about same issue.
http://discussions.apple.com/thread.jspa;jsessionid=1D85FFDB1B589AFF1D9EFE2943E5 353C.node0?messageID=11502097&#11502097
The only problem was about the sudo command in Terminal.
Using "sudo chmod -RN /Users/short_name" as suggested, I got invalid argument.
But using "sudo chmod -N *" then "cd Library" and "sudo chmod -N *" and then "cd Preferences" ... then again "sudo chmod -N *" I've cleared ACL.
Finally, booting up from Leopard DVD, choosing "Reset Password" from the Utilities menu and there "Repair home folder permissions" did the job.
Now all preferences' files have only one group as "everyone" (and me as user of course).
Cheers,

Similar Messages

A mess with account, administrator PW, permissions and privileges!

I don't know where to start. I've tried a number of the suggestions in the other posts below, but just can't get into my HD1. I inadvertently deleted some folders from Library (but did put them back). I thought they were doubles.
I re-booted from my Snow Leopard install DVD (hold down C). I have tried a number of times to choose a new password. But, each time I can Log-in, but notice that I can't get into my Administration PW. Now, which one do I use? The one when I installed Leopard 2~3 years ago? (That one I forgot). Or one of the few that I just created?
Anyway, I live just outside of Tokyo, Japan and called the Apple Store in Tokyo (got an English speaker) and he directed me through the steps. But, he said to choose System Administration (root) which I did. Later I realized that shouldn't have been done from the article that he had sent me. I followed his steps, could log in and then noticed that I could use Mail (if I filled in my Mail PW etc.) but my clock couldn't be authenticated as I tried to set the time. It's on L.A. time. (but in Tokyo).
So, next that didn't work and he e-mailed me the Apple site Help articles on re-setting the accounts. I tried a few more times and still couldn't access to authenticate. So, I re-installed my Snow Leopard disk. 10.6...
I went to the Apple Support site and downloaded the Snow Leopard up-dates.... I've tried to install the up-dates of Snow Leopard 10.6.6 and that couldn't be authenticated either and it said I need 10.6.5 tried that and the same thing all the way down to 10.6.2 and still none of them could be installed either. Now, iTunes can't be accessed. and I just tried to install the newest Skype and that also can't be installed. (all on HD1 in applications) and my printer also... I can get online with Safari and Firefox O.K.
I also tried to use Disk Utility and verify disk/repair disk but get, "insufficient privileges"! and can not verify permissions. The time set can't be done. I click on the Lock it shows "authenticate" for a second and stays locked...
The Snow Leopard up-date 10.6.6 shows this....
Even though SL 10.6.6 is installed, it keeps going back to Mac OS X (10.6.1) below....
I wanted to post a screen shot here, but don't know how....it couldn't be copied.
PLease...let me know...thank you
What can I do from here? Anyone out there able to help me! thanks. I am NOT a computer wiz and not really into any type of "Terminal" lingo to understand what I'd do.

ok, that's not normal then. then you are right and some permissions are seriously messed up. before we proceed a couple of questions. are you logged in as the user Savannah when you are experiencing these problems? were you trying to change permissions on the Mail folder while logged in as Savannah or as some other user. you should do it while logged in as Savannah. other users shouldn't have permissions to the Mail folder of user Savannah.
if you are doing this while logged in as Savannah I suggest resetting permissions and ACLs on Savannah's whole home directory. this is much easier if that user is admin so give it admin rights temporarily in system preferences->accounts. you can remove admin rights from that user later, once we fix everything. after you've made that user admin log in as Savannah and run the following terminal commands (copy and paste please)
sudo chflags -R 0 ~
you'll have to enter the password of user savannah after that command. it will not be echoed on the screen. that's normal.
Next enter
sudo chown -R `id -un`:`id -gn` ~
and then
chmod -RN ~
next, boot from the leopard install DVD and reset ACLs on Savannah's home directory as described here
http://support.apple.com/kb/TS1334?viewlocale=en_US
after that log in as savannah again and run
sudo chgrp -R `id -gn` ~
then try using Mail again. it should hopefully work now.

Need Quick Help: LR and PS issue

In my work flow, I do all of my adjustments in LR but I do send certain photos into PS to get fine tuned and then the file is usually re-imported back into LR so that I can organize my files and upload them to various sites and services.
The issue that I am having now, is that when I choose to save the photo as a full sized JPEG it no longer automatically imports in back into LR even if I manually do it. It only re-imports the photos automatically if I save it as a Tiff.
Someone recommended on another forum that I might need to change the file names which worked, but no longer linked the photo to the original cr2 file.
Could anyone help me resolve this issue?
Thanks

kellyzallison wrote:
Ever consider converting to DNG format? Not only is it a great alternative
to RAW + XMP files, it offers a lossless compression which can be great if
you're concerned about hard drive space. Adobe presents some very helpful
info about the DNG format here:
http://www.adobe.com/products/dng/?promoid=DTEHA
You might want to read the thread. The OP is rendering the file to PS. Irrespective of whether the RAW file is converted to DNG or not this requires the creation of a TIFF or PSD.
Converting a TIFF to DNG would be pointless ,DNG is a TIFF itself, and create larger files as TIFF's zip compression, which is lossless, is not only the same as used by DNG but can also support layers which DNG cannot.
Personally the only time I open a file from LR into PS is when I have a issue that requires the use of layers as anything else editing wise can be done in LR. I always save with the layers intact so I can reopen if I need. This does create pretty large files, from even smallish originals, let alone 21 MP cameras. However I have loads of hard drive space. If you are short of hard drive space then just enable TIFF's zip compression, this will be at the expense of longer save and open times, but otherwise have no effect on the files itself other than reducing its size considerable.

Can't Repair Permissions and other issues

Just updated to 10.5.2 and started having some video problems. The laptop won't wake from sleep, or if it does, the screen may go blank again. Also, upon waking sometimes, the mouse seems sluggish almost as if there is a remote user. Tried repairing permissions and can't get it to repair permissions. Also, when I switch users or try to authorize installations, it tells me the user name or password of one of the administrator's is incorrect and I know it's not. Very strange things.

Welcome to Apple Discussions!
Did you backup your data before updating?

Web ADI Error: Permissions and Connection Issues (Please Help)

Hello
I'm new to WEB ADI and I'm trying to set up on an 11.5.10 Oracle Application. I'm reading the white paper "Understand and using Web ADI in Oracle HRMS" From metalink
I created the functions Create Document, Web ADI Layout Definition, Web ADI Text Mapping and HRMS Create Document. I also create the sub menus HR ADI Seeded Integrator Form Functions and HR ADI Skills Seeded Integrator Form Functions in the menu US_SHRMS_NAV, and made sure the ‘BNE Allow No Security Rule’ is set to Yes
I was able to get the seeded download procedure to work, however the seeded upload procedure didn't work for me. I received an error " The connection to the server is unavailable". I also notice that I don't have access to HR Update Salary Proposals Integrator or the HR Integrator Setup integrator, when I select them from WEB ADI I get the following error "You do not have permission to access this functionality."
Can someone please assist me in get passed these issue?

Please see these docs.
When Trying To Upload the Salary Proposal Receiving Connection Unavailable Error [ID 604200.1]
Error -The Connection to the Server is Unavailable When Upload Web ADI - Interface Columns Integrator [ID 394680.1]
WebADI Upload ''Connection To The Server Is Unavailable'' While Uploading [ID 419995.1]
Web ADI Create Document Fails - Connection to The Server is Unavailable Error on Worksheet [ID 334632.1]
Connection To The Server Error Message When Using WEBADI journal upload [ID 556465.1]
WEBADI Cannot Upload ADI Spreadsheet Because "The Connection To Server Is Unavailable." [ID 359584.1]
Connection Unavailable Error Occurs When Uploading Files In Web Adi [ID 271811.1]
Error 'The Connection To The Server Is Unavaiable' when Uploading WEB ADI Document [ID 847091.1]
BNE.D Web ADI Letters Fail to Export Download is an Empty Document - Spreadsheet [ID 329926.1]
Also, please check the BNE.log file for details about the error -- How to Create a BNE Log For Web Adi Issues and Errors? [ID 817023.1]
Thanks,
Hussein

SVN Source - File permissons and format issues

Hi,
I checked out source from svn repository and tried to build, permissions on files are wrong, is it SVN doing or repository have files with that permission?
I also noticed, tomcat sh files have again wrong permission (no execute or read) and also in dos file-format, which means it would throw ": bad interpreter: No such file or directory" error, if executed on *nix boxes. I have to convert those using dos2unix..
BTW! things failed even when I was trying using sudo...

On Thursday 28 Feb 2008, Abdul Qabiz wrote:
> Hi,
I checked out source from svn repository and tried to build,
> permissions on files are wrong, is it SVN doing or repository have files
> with that permission?
Wrong in what way ? On which files ? On what O/S ? What SVN revision ?
> means it would throw ": bad interpreter: No such file or directory" error,
> if executed on *nix boxes. I have to convert those using dos2unix..
I had no such problems in my SuSE or Unbuntu Linux boxes.
Tom Chiverton, stupid web forum
This email is sent for and on behalf of Halliwells LLP.
Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at Halliwells LLP, 3 Hardman Square, Spinningfields, Manchester, M3 3EB. A list of members is available for inspection at the registered office. Any reference to a partner in relation to Halliwells LLP means a member of Halliwells LLP. Regulated by The Solicitors Regulation Authority.
CONFIDENTIALITY
This email is intended only for the use of the addressee named above and may be confidential or legally privileged. If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents. If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 2500.
For more information about Halliwells LLP visit www.halliwells.com.

IPhoto Help - photo and message issue

I am fairly new to using Apple products, so if this question or issue has already been covered please forgive me. Just point me to the link. I started iPhoto recently and its pretty fun, but I've been having a problem. When I attach a photo to a message and send it, the first email comes out the way it is supposed to. However, if I crop a completely different pic and again attach the photo to a message, the emailed pic and message reverts back to the card before (pic and words). Any suggestions as to what I'm doing wrong or what to do to alleviate this problem? Thanks in advance.

It seems that the library system is more complicated than it needs to be.
I don't think so. When you bear in mind what iPhoto actually does it makes a lot of sense. Each folder has a specific role:
Originals are the photos as they were downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
(iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
why there can't be a set of files (pictures), and a directory (info on sorting or categorizing the pictures)
The folders above each have their specific role to play. The "info on sorting or categorizing the pictures" is tracked in the database files. The good news here is that a single pic can be in 1, 10 or 100 albums with no extra copies of the files floating around.
Bluntly, you could simplify the library, but then iPhoto wouldn't work. If you want a simple folder of images, then don't use iPhoto. Pop your pics in a folder and use an Image Viewer. There are many available for the Mac.
Shouldn't there be a dialog box asking me how I want to burn the pictures?
Or, just a wild thought this, have you checked the Help?
Regards
TD

Reinstall of Win XP Pro on T42 help = Device and Driver Issue

Hi All, need help. Recently I re-installed Win XPro on a T42 Type 2373 ThinkPad. Prior to doing a re-installed all devices were working(just 3 days ago). Wireless and Ethernet. After a clean installed the systems does not see ethernet or wireless device. I checked Device Manager and I get the famous "? Other Devices" for Ethernet Controller. I have installed all the driver listed on
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-55386
Still systems does not recognize device. Devices are ENABLED in the BIOS. Device Manager does not show Wireless device and Ethernet. I was able to install video, sound, & modem. So here I am stuck unable to connect to internet via LAN or Wireless. I am lost for words. Any help would be greatly appreciated.
Thanks

Solved: after downloading the driver I actually had to go to the location of the file and click on the SetUp and it worked.
After downloading and opening the exe file i assumed (and we know what that does) that was all i needed to do. It seems that also have to then open the folder that this file unpacked to and click on the setup file (which i didn't realise was there).
http://forum.thinkpads.com/viewtopic.php?t=66278

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

I have updated my Macbook Pro from 10.7.5 to 10.9.1 and it keeps on restarting after upgrade. Please help me fix this issue.

Hi All,
I have updated the Macbook Pro from 10.7.5 to 10.9.1 today and once it is done I restarted the system and it keeps on crashing/restarting the system every 2 min.
I have found the below backtrace. Please help me fix this issue.
Anonymous UUID:
C72C8841-51A0-BB21-689C-2AB204820087
Mon Dec 30 23:57:23 2013
panic(cpu 0 caller 0xffffff801da5260f): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0, bits changed 0xdeadbeefdeadbeef, at offset 8 of 128 in zone: kalloc.128"@/SourceCache/xnu/xnu-2422.1.72/osfmk/kern/zalloc.c:461
Backtrace (CPU 0), Frame : Return Address
0xffffff8096bf3690 : 0xffffff801da22f69
0xffffff8096bf3710 : 0xffffff801da5260f
0xffffff8096bf3770 : 0xffffff801da51d09
0xffffff8096bf3870 : 0xffffff801da2aa2f
0xffffff8096bf38a0 : 0xffffff801dde080d
0xffffff8096bf38e0 : 0xffffff7f9fcada11
0xffffff8096bf3930 : 0xffffff7f9fcae16e
0xffffff8096bf39a0 : 0xffffff7f9fcae523
0xffffff8096bf39d0 : 0xffffff801dc13438
0xffffff8096bf3a00 : 0xffffff801dd83378
0xffffff8096bf3a70 : 0xffffff801dbfd1ae
0xffffff8096bf3ae0 : 0xffffff801dbf437a
0xffffff8096bf3b80 : 0xffffff801dbe5f15
0xffffff8096bf3c30 : 0xffffff801dbe67d2
0xffffff8096bf3f50 : 0xffffff801de3de23
0xffffff8096bf3fb0 : 0xffffff801daf3e06
Kernel Extensions in backtrace:
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[E163B7AE-F6E5-328 6-B827-66DB3FE3DB7B]@0xffffff7f9fcac000->0xffffff7f9fcaffff
BSD process name corresponding to current thread: applet
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x000000001d800000
Kernel text base: 0xffffff801da00000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 172506613860
last loaded kext at 107245362778: com.trendmicro.kext.KERedirect 1.0.0 (addr 0xffffff7f9ff33000, size 24576)
loaded kexts:
com.trendmicro.kext.KERedirect 1.0.0
com.logmein.driver.LogMeInSoundDriver 1.0.0
org.virtualbox.kext.VBoxUSB 3.2.6
org.virtualbox.kext.VBoxDrv 3.2.6
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.3fc1
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.filesystems.autofs 3.0
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Unable to gather system configuration information.Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:
Please help me fix this issue.
Thank you,
Nishanth

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I purchased my iPhone from UK which is unlocked but Now I am back to My Origin i.e INDIA and unfortunately my iPhone Display get damaged and Now I have to Repair it but..... The Problem is "iSTORE in India Doesn't Helping me in this issue"

I purchased my iPhone from UK which is unlocked.
But Now I am back to My Origin Place i.e INDIA.
And unfortunately my iPhone Display get damaged.. and Now I have to Repair it but.....
The Problem is "iSTORE in India Doesn't Helping me in this issue".
I would request APPLE please get this FIX as I am also your customer and now it is globalization.
SO please find any way to get this fixed...
Apple Customer care Please send me any Services note That I can show to iStore in India i.e (In Korum mall Thane, Mumbai, Maharashtra, India )
So I can get my dispaly fixed in INDIA itself.
Requested to please help me out of this issue..
Thanks
APPLE user
sonu.mas007

They can provide some kind of way towards this solutions...
eg:
1) Accept my UK iPhone in India courier it to Purchased Place (Repaired it)
2) Accept my UK iPhone in India Take some difference assign me India iPhone.
3) Accept my UK iPhone in India give me any option to ugreade to iPhone 5 (Indian).
4) Accept my UK iPhone in India give me some Receipt (Courier me My new iPhone from UK).
5) Approve my VISA for going to UK again as it not easy for INDIAN to go there with some kind of this Reason.
6) Give the Postal Address where we can send our APPLE to get only Service and they can send it back to us if it got reparied.
As no one would like to go UK only to Purchase APPLE..
There are some personal reason they have to go to Other countries for ... and If some one is FAN of APPLE like me would do the same mistake that I have done..
7) If the APPLE wanted to serve their customer they would have get to the solutions with their excellent mind.
As far as I am concern I am just the USER of my FAV APPLE but.. .. I guess this policy would not keep me as the SAME FAN of APPLE as I am now...
If this is not going to get solved I guess I have to start with other BRAND Like SAMSUNG S4 where I can get everything in my STATE..
But YEH it not a right was to have this BAD policy.
I just dont know why they are not coming ip with great solution for this issue in this tecnology world.
Any help to find other BEST Brand who has awesome services..

Mac mini 2009 mavericks won't boot. Blank display no logo,etc. Tried all keyboard boot functions, no help. replaced RAM w/known good. No help. Removed HD mounted in external enclosure and ran permissions and repair. No help. Upgraded HD to Yosemite a

Mac mini 2009 Mavericks won't boot. Chimes and power light comes on. USB ports have power. Blank display no logo,etc. Tried all keyboard boot functions, no help. Replaced RAM w/known good. No help. Removed HD and mounted in external enclosure and ran permissions and repair. No help. Upgraded HD to Yosemite and was able to boot another mini from HD mounted in external enclosure, reinstalled HD still no boot. Any ideas on how to proceed appreciated.

- Make an appointment at the Genius Bar of an Apple store. You have a hardware problem.
Apple Retail Store - Genius Bar

Calendar and Time showing in arabic but my phone's language is English. I bought my phone from DU in UAE , Dubai. Please help me solve this issue while keeping the Region to United Arab Emirates

Calendar and Time showing in arabic but my phone's language is English. I bought my phone from DU in UAE , Dubai. Please help me solve this issue while keeping the Region to United Arab Emirates

Valentine350z wrote:
while keeping the Region to United Arab Emirates
Not possible, I think. Tell Apple how you feel about this at
http://www.apple.com/feedback/iphone.html

No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions in Disk Utility......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..it continues with 10.7

No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions' in Disk Utility ??......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..I'll try this every 2/3 wks and always get repairs.....yet, I don't really have issues....it's been weird.......it continues with 10.7 and the update to 10.7.1.. a sample:
Permissions differ on “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”
Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.
Repaired “Library/Preferences/com.apple.alf.plist”
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

As described in this article, don't worry about it:
http://support.apple.com/kb/TS1448?viewlocale=en_US

What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..

What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..?
I try also my old icloud user but its not recognizing the accoun...

What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..?
I try also my old icloud user but its not recognizing the accoun...

Help, permissions and privileges issue.

Similar Messages

Maybe you are looking for