Help please, Hard disk issues and HPQ confusion

Hi all,
I have a Compaq N800c EVO laptop, well 2 but thats a story. And I'm having a game with the hard drive.
Until monday my main laptop was an FIC A360, but this Compaq will be taking it's place.
So I have the N800c which came with a compaq stickered 40gig fujitsu MHS2040AT, it boots and works, OS and all. The fujitsu is ATA-100 and oem equipment in the notebook.
The FIC I'm retiring has a retail Hitachi Travelstar 7K100 60Gig hard disk. This works (OS and all) in the FIC but in the N800c nothing, just a flashing cursor on the top left of the screen. The Bios can see it, self tests ok, but won't boot it.
If set to cable select I get the same, If i set it to device 0 it gives a non system disk error.
I thought this was strange so I've also tried 2 Fujitsu MHN2200AT 20gig drives again, no joy. Both had clean OS installs.
I flashed the system Bios up to the latest revision from the support section of the site, tried Hiachis drive config utility to hold the ATA to 66, and tried all of the above again.
I even have a second of these laptops i purchased without a hard disk and almost disgarded as i thought this error was the laptop. Since discovering this all of this behavior is repeatable in the second laptop!
I've read about drive firmware being locked down on IBM thinkpads, is this a similar thing? Where do i get the correct firmware to apply to my drive? to allow it to work with this laptop. Or Where do I get a Bios that isn't prohibitive for the Laptop.
I have written to Hitachi this morning, and now posting here this lunch time
Many thanks and kind regards
Richard

Not so, I've done this on a few machines hence wanting to do it on this one.
At initial boot up it'll discover a whole bunch of new hardware and the items it can't find will become yellow question marks in the device manager. i'm going to have a little play with one of the scrificial fujitsus later and verify either way then i'll report back. I'm fairly confident what i'm seeing is a firmware clash though as there is no logical reason the drive shouldn't load. It should at least go through to some activity, but its almost as if the computer has asked if its in its club, then when the drive says no it refuses to continue. In the bios and hitachis hard drive utilities it tests as ok. As do the two little fujitsus.
IBM thinkpad drives are "ibm'd" in their firmware anyone know of compaq doing this?
Rich

Similar Messages

My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.

My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.

Hi Anthony ,
Here is the link to connect with Adobe Chat Support.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Hope your query gets resolved .
Regards
Sukrit Dhingra

Toshiba Satellite L650-07U, Hard disk failure and replacement

Hi all,
I have Toshiba Satellite L650-07U Laptop, Model: PSK1EC-0700Q with 4GB RAM, 650GB HD, Windows 7 Home Premium installed. At the time of first use, i made Recovery DVDs which took 4 blank DVDs using Recovery media creator.
From 2 weeks it is giving problem, at start its slowdown with every application, then suddenly it started Hard disk failure error and ask to backup important files. From that instant i did all my backup save in another portable Hard drive.
I had hiren boot CD, and ran RAM test and found it OK, and then run Hard Disk test and found few bad sectors at few certain point, As 650GB Hard disk was taking alot time of time for checking bad sectors, so i stopped that application.
First I tried Recovery DVDs to restore Windows, but it failed as Laptop DVD-Writer was unable to boot from those created DVDs (DVDs are OK as had checked it on Desktop computer DVD-ROM), Laptop DVD-Writer is also working as I test few more bootable CDs and it booted perfectly, but it is not booting from Recovery DVDs.
Than i tried to restore from Recovery partition using Factory restore settings, it erases all data and reinstall new and fresh copy of Windows 7 Home Premium. It works fine for few hours than again pops up Hard Disk Failure message again and again. I searched here in Toshiba Forum and have found similar problem with other members and finally decided that it need to replace Hard Disk with new one. As It is now two and a half month old, thats why i need to buy new Hard Disk for my Laptop.
I checked all partitions of drive using Hiren Boot CD, and had found that there are four default partitions in Toshiba original laptop drive,
One hidden partition of 1.5 GB
One hidden partition of almost 21 GB
One hidden partition of almost 12 GB
One partition of 561 GB, which was the original partition where windows 7 was installed along with all of my Data.
Now I want to replace faulty drive with a new one and have a lot of question in my mind which I need to share with you guys.
At the time of first use I installed Windows 7 64 bit edition, and made Recovery DVDs, and at second time of restore to factory setting I had installed Windows 7 32 bit. I have confusion about recovery DVDs (which is not booting from default DVD-Writer of Laptop), either it has 64 Bit recovery data or 32 bit? Or have both 64 and 32 bit Data.
Toshiba restore to factory setting without using any recovery DVD/USB is the best possible way to restore Windows 7, How can I make same recover hidden partitions from original/faulty hard drives to new hard drive partitions? Is this possible and how?
On Default hard drive there was one partition of 561GB instead of two or more partitions. Is this possible to split partitions in new hard drives instead of one big partition?
As Recovery DVDs are not able to boot from laptop default DVD-Writer, is it possible to open those DVDs on another System and copy tem in USB drive and use it for booting? If it is possible than please show me the steps for making bootable USB from these Recovery DVDs.
Thanks,
masterleous
Solved!
Go to Solution.

Satellite L650-07U (PSK1EC-07U00Q)
This site is for US computers. I doubt you'll get your questions for that Canadian model answered here.
There appear to be two recovery partitions. Maybe one for 32- and one for 64-bit Windows. Or maybe one is for English and the other for French.
Your User's Manual isn't much help either. You probably need to ask Toshiba tech support in Canada.
About all I have to offer is this: Be wary of drives with advanced-format technology. See my message about that.
-Jerry

Did primaryhard disk selt test and received #10008 replace hard disk 1 and then yes or no response

I have 2 issues with hp dv4-2049us did primaryhard disk selt test and received #10008 replace hard disk 1 and then yes or no response and my touchpad mouse is not working Iam using an external mouse and now the keyboard is not working please help

If the hard diskhas failed, there will be unusual things happening with hardware and operating system.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

External Hard Disks Windows And Mac Compatible

I have recently bought an external hard disk, which I plan to have one 80gb partition onto which I can do regular backups of my mac hard disk onto, and then the other 220 or so just for data storage. however I want to have the 220gb readable by both macs and PC's, and the 80gb as bootable by OS X (I am doing a complete Hard disk clone onto the external disk)
anyone have any ideas

If you looked at Disk Utility [...]
I didn't mention Disk Utility at all. You do know that Disk Utility is just a simplified GUI front-end for the full functionality provided by diskutil, don't you? This does not make diskutil any less "officially supported".
Furthermore, the Mac OS X hints article is probably
not supported by Apple and therefore I didn't mention
it. I'm not in the habit of going against Apple
policies. Especially while I'm still under their
warranty.
I have no idea what are you talking about here. Is this just FUD or what? Of course it is not "officially supported". Neither are many other useful hints provided at that website or elsewhere. So what? In no way does that mean that it cannot be done, not even that it shouldn't be done. Just do it at your own risk, there is nothing legally or ethically wrong about doing it.
Had you just advised the OP not to do that, I would have had no problem with it, and wouldn't have "corrected" you. But that's not what you said. What you said is wrong and had to be corrected, it's as simple as that.
I did Google what you asked and didn't find any
relevant articles.
I wonder what did you Google for and whether you did actually read anything you found. These are just from the first 20 results I get:
http://developer.apple.com/documentation/Darwin/Reference/ManPages/man8/diskutil .8.html
http://forums.macosxhints.com/printthread.php?t=41187
http://www.groovelicious.org/david/2004/12/
http://www.macosx.com/forums/showthread.php?t=236147
http://www.macusersg.org/forums/?topic=14579.new
If you have a solution why not you just explain it
Because it's not a simple solution and it's much better explained by providing a link to the web page where it's fully discussed by people who have actually tried it and compared it to other approaches. You're not trying to make me believe this is a bad idea, are you?
instead of trying to correct another poster.
Oh, man! You were wrong and had to be corrected. You're not saying that correcting someone who posts wrong information is a bad idea, are you?
Why have you chosen to take this personally I don't know, but I urge you to keep this discussion in strictly technical terms and support your assertions with facts, which as of now you've not done yet -- not that it has stopped you from requiring me to do it, despite I clearly had already done it, though.
It should be your intent to help the OP, not to try and
correct another poster, even if it didn't work.
Abe, I really urge you to calm down and re-read what you're saying. Correcting wrong assertions is part of helping the OP, isn't it?
Now, if you really think you were right when you said "There is not a way to have two partitions on a disk with one being Mac OS X format and one being Windows format", please support your assertion with facts and keep the discussion in technical terms instead of just telling me I shouldn't correct you. And yes, I will accept links to publicly accessible web pages that support your assertion as facts and won't require you to explain them.
Regards.

Toshiba Satellite a505-6005 hard drive issue and questions regarding options I may have

Issue: start up computer and windows does not start. It eventually goes to a startup repair screen and eventually says "resolving disk errors...", and that's if it even gets to that screen. Unfortunately I never made a recovery disk or system image discs (I know that was not smart). I did however kept my files backed up so that was good.
Steps I took: Took it to Best Buy and the tech advised me that the Black Tie 2 year protection had expired on Jan 30th 2012, and so it could not be repaired for free. I asked the tech there how much it would cost to fix and they had advised me that it was most likely a hard drive issue and that it would cost nearly $400 to replace/fix it. So I decided to buy a new Asus K53E-BBR14 laptop since it was not much more. When I got home and loaded everything up and got the computer to how I want, I went ahead and made a recovery disc and system image disc's. I tried using the recovery disc that I had made with my Asus in the Toshiba laptop and boot it from the dvd drive and it did not get anywhere. So I ASSUME that it really is a hard drive error because the RAM worked just fine in my new laptop and "repairing disk errors.." means something is wrong with the hard drive:
Now that you know the background of what has happened my questions are as followed:
1. Can I buy a new hard drive for the Toshiba and use the recovery and system image disc's i created on the new hard drive that i install in the toshiba? and just removed the bloatware from Asus (or does that not even get added to the disc's I created)?
2. If so, will it prompt me to enter the Windows 7 product key? and therefore using the product key located on the bottom of the toshiba?
3. What other steps could I take to make this toshiba laptop salvageable? This way i can turn around and sell it.
Thanks,
Russell States

Also,
I noticed that i can purchase (well pay the shipping anyways) recovery media from Toshiba. Can I use that on a new hard drive installed in the toshiba?
BTW ran the Windows Memory Diagnostics Tool and no problems were found with the memory. and i do not care about the old hard drive as I have MY files backed up. I just want to try to get this toshiba laptop back to being "like new".
Thanks,
Russell

Help needed Hard disk Problem

I am not very computer Savoy!. But every time I turn my laptop on it keeps freezing up on me and I get a massage that says I am having a Hard Disk Problem and that I should back up all my files before the computer crashes. And I would like to what I should do to fix this? I thought that I could reload my operating system but my computer did not come with that disk and I can't seem to find it here on this web site. Any idea's?

Without knowing specifically which model you have it's difficult to tell for sure, but most Toshiba's made in the past few years come with a Recovery Partition. You can invoke the Recovery Process by holding down the 0 (zero) key while turning the computer on and holding it down until the Recovery Process starts. You can also create a set of Recover Disks from the Recovery partiton by going to "Start - All Programs - Toshiba - Recovery - Recovery Disk Creator".
As for the error message about Hard Disk Problem, that could mean that the hard drive is starting to malfuncion and will soon stop functioning at all. You need to determince what brand of hard drive your's is, go to that companies support site, download their Diagnostic Program, install it, and run the most exhaustive test to determine if it is failing or not.
And please backup you important data as soon as humanly possible as there is a good chance you will lose it forever.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

Question
How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" if you want to restore multiple windows. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Music Files Deleted After Hard Disk Failure and First Sync After Hard Disk

Hi,
I recently had a hard disk failure and lost all of the data on my hard drive. I replaced the hard drive and reinstalled all of the software including iTunes. I am running Windows XP Home. The first time I plugged my iPod Nano into my computer after the hard drive replacement it synced to iTunes and since iTunes had no music files it deleted all of the music files on my Nano. How do I get them back and why on earth would iTunes do such a stupid thing??? My Nano contained many songs that I bought from iTunes and I want to get them back. I have found some third party software that will undelete the deleted files but it costs $69. I don't feel that I should have to pay to correct a defective feature in iTunes. Does Apple have an undelete utility? Can I redownload the songs that I purchased from iTunes?

*The first time I plugged my iPod Nano into my computer after the hard drive replacement it synced to iTunes*
When you connected did you get a message that your iPod was linked to another library, and then press Erase and Sync? When an iPod is set to update automatically and you connect to a computer with an empty iTunes and accept the message above it will erase the originals completely (as you have discovered). Also as you've seen, none of the recovery programs are particularly cheap so you have to decide if in your particular circumstances it's worth it to get your songs back. It may be if you have a lot of purchased tracks which you will have to pay to download again. If they came primarily from your CDs then it's most likely not as you can re-rip them.
*Can I redownload the songs that I purchased from iTunes?*
If you didn't make a back-up of your purchases to restore from then I'm sorry to say that the policy on lost purchases is that you have to pay to download them again:
"Once a Product is purchased and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage." iTunes Store: Purchased content can be downloaded only once
You could try contacting the iTunes Music Store Customer Service and you might be able to persuade them to sanction a second free download. There have been occasional reports in the iTunes forum of this happening, however just be aware that they are not under any obligation to do so. If you click on any of the links on this page you'll find a space at the bottom to email your query: iTMS Customer Service

My hard disk crashed and the backup of my library was not saved. Fortunatly my music files are on a seperate server. How can I sync my Playlists back in my library?

My hard disk crashed and the backup of my library was not saved. Fortunatly my music files are on a seperate server. How can I sync my Playlists back in my library?

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

My laptop hard disk crashed and i could not take backup of iTunes.

My laptop hard disk crashed and i could not take backup of iTunes. I installed a new hard disk and installed i Tunes but If i connect my iphone 3Gs to the fresh installed iTunes, will all the music and apps on my phone get erased ? How to sync my phone so that it does not get erased.

See Recover your iTunes library from your iPod or iOS device.
tt2

Replace the hard disk has, and also have lost the OS disk.

Replace the hard disk has, and also have lost the OS disk.
Reset on my computer to install the program instantly,
Is there any way?
Thank you.

If I follow you correctly, you either have or will be replacing the hard drive in your iMac. You don't have the original OS X disks nor an operating system disk. Do you have a bootable backup? Here are some steps/options:
1) If you have a bootable backup, install the hard drive, boot from the external hard drive, then use SuperDuper or CCC to copy the external hard drive to your new internal hard drive.
2) You have your old hard drive, and it's not dead. Put it into an external case and see above.
3) You don't have either a bootable backup or a working old hard drive. You can try calling Apple Support to see if they still have the original OS X disks for your system. If they do, they'll charge a nominal price for them.
4) You checked and Apple no longer has disks for your system. You can go to the used market to buy Leopard 10.5 disks. If you do, be sure and get retail black-faced disks, but don't get the black-faced disk which is an upgrade disk .... if you don't have 10.4 on your system, it won't work. Careful of gray-faced OS X disks as they are locked to the original system type they ship with. So a gray faced OS X 10.5 disk for a MacBook won't work on your iMac.
5) Another related option is to buy 10.6 Snow Leopard, if your system meets requirements. This is still sold by Apple, and in the US is available online for $29.99 from the Apple store. Snow Leopard requirements are:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
6) Or you could consider Lion, via the USB stick that is sold in Apple stores. Lion requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory (4GB recommended)
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Hopefully I haven't totally misunderstood your question, and answered something you weren't asking!

I have a powerbook G-4 15 inch, It wont boot up and the display only works on the first try. it gets to the apple screen and freezes, when i try to restart theres no display. Help please, whats the issue here?

I left it running over night, it was running perfectly, in the morning the screen was black. i tried to restart it and got no display but i can hear the machine running. so i put away for several months, plug it in, charge the battery, it boots, i have a display, it loads the desktop and freezes. when i try to restart it theres no display. the last time i tried, i started it, i got to the apple screen and nothing. whats the issue here? please help.

Will it boot OK in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Safe Boot takes longer than normal startup
http://support.apple.com/kb/TS1884?viewlocale=en_US
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
 Cheers, Tom

Please HELP! = major disk issue - none of OSX "help" tools works (repair/time machine/reinstall)

Hello to all,
My first post, but directly with a very difficult case I suddenly encountered yesterday evening...
When, as usually I opened the lid, it turned on from sleep, as usually, however frozen suddenly... so I did hard turn off... with ON/OFF button. When it turned on again, I had no possibility to put my password, but I was directly faced with "OSX tools" with 4 options (it is in Polish so I try the translation):
1) Recover from Time Machine back up;
2) Install OSX again;
3) Get online help;
4) Disk tool;
I am totally ****** off how this could happen. There was so much stuff on the disk, including the whole Aperture libary with thousends of my daughter photos (she was born a year ago) - priceless stuff.
I would never expect Apple to give me such an "experience"... never heppened to me on any PC's before..
I have 2011 MacBook Pro 13" with Maverics.
This is what I encountered using each of solutions:
1) I use Synology DS209 for Time Machine backup (connected via Lan cable). As far as I remember backup is about 2 months old. Anyway when I choose this option. OSX tool finds the Time Machine in DiskStation, connects to "MacBook Pro" timemachine on the external disk, BUT cannot find any BACKUP further on!!!! I am lost!
2) second, but not preferred option is OSX reinstallation.After initial analysis, and conditions acceptance, I cannot choose the only disk available. I can see only "recovery disk", but when I click on it, there is a message popping up "This disk is blocked". Obviously this prevents any further activities in reinstallation;
3) Third option is BS clearly, no help at all.
4) Disk tool shows me several disks / I am not an expert, so I am not sure how to understand it (Bold is active, standard non active):
- 320,07 GB Hitach HTS54503...
- Macintosh HD
- Superdrive
- disk1
- OS X Base System
I run "check disk" for Hitachi. No problems. Nothing to repair.
I run "check disk" for Macintosh HD => This disk requires repair. So I run "repair". Quickly I get a message "Disk Tool is unable to repair this disk. Please backup as much data as possible, format the disk and recover the files from backup"..... Really????? How can I backup any files???
DEAR COMMUNITY, please HELP!
What to do in order not to loose any data on one hand and on the other be able to use the computer again?
Please note I do not use "recovery CD" all is running without anything in CD/DVD drive.
Thanks in advance for your answers, competence and experience!
Disk tool does not give any solution, showing

You are in a bad situation, because the internal drive has malfunctioned and your only backup is on a device that is not suitable for use with Time Machine, despite what its manufacturer says.
You must try to make another backup now, before you do anything else. It may or may not be possible.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Can anbody offer help recovering hard disk and OS on 13" macbook late 2008

I am new to Mac repair but a pretty skilled PC repair guy (hobby, not job). I have a college student friend with an A-1278 13" late 2008 Macbook that would not boot. He could't remember what happed that made it stop but I said I would look at it for him. When I got it I determined the power button worked and the hard drive spun bbut it would not boot - no chiem, no video. If I helddown the power button it would shut down. I did some research on the net and was pretty well convinced there had to have been some liquid contact. I disaaembled it completely (thanks ifixit!) and cleaned the logic board. I dired it with a blow drier on cool but let it air dry for nearly a week afterward due in part to caution and part to my schedule. When I reassembled and tried the power but I got nothing, period. Dissapointed, I looked up how to start without the power button (I had read about during me research). I tried it (shorting contacts on logic board) and to my suprise it chimed and started up. Everything seemed to work OK except the keyboard. I moved around a bit and realized it was running a Parrallels virtual machine (which I've heard about but know nothing about). I assumed I had simply not connected the keyboard cable completely. I navigated with the mouse to shut down the virtual machine and then navigated to shut down completely so I could check and reseat the keyboard connector. While it was shutting down I left the room for about 30minutes to do a chore for my loively bride. When I returned, I reseated the cable (which was indeed not in completely) and check all of the other ribbon connectors. Satisfied I turned it over and pressed the power button and, again to my surprise, it chimed and started. This time however I got the rgey "Apple" screen and the spinning wheel but it never fully booted. I held down the power button to shut down. I did some research again and it indicated there might be a problem with teh hard drive. Strange but ... I checked the hard drive connector and it was fine so I tried starting again and let it go for a while. Eventually the screen turns blue but the whell just keeps on spinning. I shut down with the power button and did some more research. Unfortunately I don't have the OS disk available so I tried single user boot and ran fcsd. It reports an "invalid key" and quits afer three tries. I am trying to get a hold of a disk but thought I'd throw this out to the experts to chew on ( or laugh at, as the case may be).
Can anybody offer a suggestion for a path forward?
Thanks!
Mike

Firstly, 10.4.9 won't work - Macs won't boot from an OS version earlier than the one they shipped with (hence my caveat on the Leopard versions).
Disk Warrior may well help, at least for checking the file structure; check their website for the correct version - off the top of my head 4.6 rings a faint bell, but check.
TechTool Pro 5, likewise, and that will do hardware checks too.
Either or both of those is worth having if you intend looking at more Macs.
As for booting from the SL disc, Disk Utility is accessed from the first screen after the language choice. Ignore the installer and go to Utilities in the menu bar.
Running Repair Disk won't hurt anything that isn't already broken. Just don't touch the Apply or Erase buttons
As an aside, if it came to installing from the SL disc, SL's normal installation only replaces the system files - applications, data and preference settings aren't touched, unless you erase the disc from DU first.
I wouldn't do that without the owner's informed consent though - SL needs printer driver updates that may not be available for the equipment they have, and some applications need paid upgrades (Adobe for one).

Help please, Hard disk issues and HPQ confusion

Similar Messages

Maybe you are looking for