Help: Problem migrating to 9052 or 1012
Hello You Experts,
I have a BC4J/JSP application originally developed in Jdev 902. It has been in production for a while already, and has been migrated all way through 9034 and 9041 (build 1436). This is a relatively simple application, only BC4J is involved, no Stunts, no UIX or anything else. It works pretty well so far. However, I am having problem migrating it into 10g now. I got the same error (see below) with either Jdev 9052 (build 1618) or 1012 (build 1811). It opens (migrated by the Wizard), and compiles without any error. It actually runs and I have got to the login page. And then itâs throws an NoSuchMethodError exception upon login. My application supports dynamic credentials. The debug output indicates that it could not get the internal connection, though the user connection was successful. Any ideals for this error are greatly appreciated. Thank you very much in advance.
Following is the stack trace:
Message: void oracle.jbo.html.DataSourceImpl.(java.lang.String)
java.lang.NoSuchMethodError: void oracle.jbo.html.DataSourceImpl.(java.lang.String)
at oracle.jbo.html.jsp.datatags.Utils.createDataSource(Utils.java:185)
at oracle.jbo.html.jsp.datatags.DataSourceTag.doStartTag(DataSourceTag.java:86)
at Login.jspService(Login.jsp:61)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:347)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
And following is the debug output (excepted to conserve apace):
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\Jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config>
C:\Jdev1012\jdk\bin\javaw.exe -ojvm -XXdebug,quiet,port3096 -classpath C:\Jdev1012\j2ee\home\oc4j.jar;C:\Jdev1012\jdev\lib\jdev-oc4j.jar -Djbo.debugoutput=console -Xverify:none -Ddisable.checkForUpdate=true -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doracle.dms.sensors=NONE -Doc4j.jms.usePersistenceLockFiles=false com.evermind.server.OC4JServer -config C:\Jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Debugger connected to local process.
05/01/31 16:52:18 Auto-deploying file:/C:/Jdev1012/jdev/mywork/LtcopWebApp/jspClients/public_html/ (New server version detected)...
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 5218 ms.
Target URL -- http://204.156.227.22:8988/ltcop/index.html
05/01/31 16:52:19 Oracle Application Server Containers for J2EE 10g (10.1.2.0.0) initialized
05/01/31 16:52:31 Diagnostics: (BC4J Bootstrap) Routing diagnostics to standard output (use -Djbo.debugoutput=silent to remove)
05/01/31 16:52:31 [00] Diagnostic Properties: Timing:false Functions:false Linecount:true Threshold:6
05/01/31 16:52:31 [01] BC4J Property jbo.maxpoolcookieage='-1' -->(Configuration) from System Default
05/01/31 16:52:31 [02] Loading 5.0 IDE classes
05/01/31 16:52:31 [03] Creating a new pool resource
05/01/31 16:52:31 [04] BC4JDeployPlatform: LOCAL
05/01/31 16:52:31 [05] Propertymanager: searching for file and system based properties
05/01/31 16:52:31 [06] {{ begin Loading BC4J properties
â¦â¦.. Cut away to conserve space â¦â¦.
05/01/31 16:52:32 [135] }} finished loading BC4J properties
05/01/31 16:52:32 [136] -----------------------------------------------------------
05/01/31 16:52:32 Diagnostics: (Properties (re)loaded) Routing diagnostics to standard output (use -Djbo.debugoutput=silent to remove)
05/01/31 16:52:32 [137] Diagnostic Properties: Timing:false Functions:false Linecount:true Threshold:6
05/01/31 16:52:32 [138] JavaVMVersion: 10.1.2.1162 dop5
05/01/31 16:52:32 [139] JavaVMVendor: Oracle Corp.
05/01/31 16:52:32 [140] JavaVMName: OJVM Client VM
05/01/31 16:52:32 [141] OperatingSystemName: Windows 2000
05/01/31 16:52:32 [142] OperatingSystemVersion: 5.0
05/01/31 16:52:32 [143] OperatingSystemUsername: Duz
05/01/31 16:52:32 [144] jbo.323.compatible Flag: false, str: false
05/01/31 16:52:32 [145] jbo.903.compatible Flag: false, str: false
05/01/31 16:52:32 [146] Loading from bc4j.jpx file
05/01/31 16:52:32 [147] Loading from individual XML files
â¦â¦.. Cut off lots of âLoading from â¦â¦ Xxx.xml fileâ entries to conserve space â¦â¦.
05/01/31 16:52:36 [248] Using DatabaseTransactionFactory implementation oracle.jbo.server.DatabaseTransactionFactory
05/01/31 16:52:36 [249] mPCollUsePMgr is false
05/01/31 16:52:36 [250] ViewObjectImpl.mDefaultMaxRowsPerNode is 70
05/01/31 16:52:36 [251] ViewObjectImpl.mDefaultMaxActiveNodes is 30
05/01/31 16:52:36 [252] DBTransactionImpl Max Cursors is 50
05/01/31 16:52:36 [253] Created root application module: 'componentsPkg.LtcopAppModule'
05/01/31 16:52:36 [254] Locale is: 'en_US'
05/01/31 16:52:36 [255] DefaultConnectionStrategy is establishing an application module connection
05/01/31 16:52:36 [256] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
05/01/31 16:52:36 [257] Creating a new pool resource
05/01/31 16:52:36 [258] Trying connection/2: url='jdbc:oracle:thin:@204.156.200.100:1521:DB20' info='{user=ltc_test_co1, password=ltcco1, oracle.net.encryption_types_client=( DES40C ), oracle.net.encryption_client=REQUIRED, oracle.net.crypto_checksum_client=REQUIRED, oracle.net.crypto_checksum_types_client=( MD5 )}' ...
05/01/31 16:52:36 [259] Successfully logged in
05/01/31 16:52:36 [260] JDBCDriverVersion: 10.1.0.3.0
05/01/31 16:52:36 [261] DatabaseProductName: Oracle
05/01/31 16:52:36 [262] DatabaseProductVersion: Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production With the Partitioning, Oracle Label Security, OLAP and Oracle Data Mining options JServer Release 9.2.0.6.0 - Production
05/01/31 16:52:36 [263] **PCollManager.resolveName** tabName=PS_TXN
05/01/31 16:52:36 [264] Getting a connection for internal use...
05/01/31 16:52:36 [265] Creating internal connection...
05/01/31 16:52:36 [266] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
05/01/31 16:52:36 [267] Creating a new pool resource
05/01/31 16:52:36 [268] Trying connection/1: url='jdbc:oracle:thin:ltcop/[email protected]:1521:db20'...
Hi Vishal,
Hello,
Unfortunately WLS 6.1 is not supported on Solaris 10. Also as of Nov 14, 2005 WLS 6.1 entered the mature phase and will be no longer supported by BEA.
http://e-docs.bea.com/wls/certifications/certs_610/overview.html
Do let me know if you need any assistance in upgrading
Cheers
Raj
Similar Messages
-
App in Jdev 9041 won't run to 9052 or 1012
I have a BC4J/JSP application originally developed in Jdev 902. It has been in production for a while already, and has been migrated all way through 9034 and 9041 (build 1436). This is a relatively simple application, only BC4J is involved, no Stunts, no UIX or anything else. It works pretty well so far. However, I am having problem migrating it into 10g now. I got the same error (see below) with either Jdev 9052 (build 1618) or 1012 (build 1811). It opens (migrated by the Wizard), and compiles without any error. It actually runs and I have got to the login page. And then itâs throws an NoSuchMethodError exception upon login. My application supports dynamic credentials. The debug output indicates that it could not get the internal connection, though the user connection was successful. Any ideals for this error are greatly appreciated. Thank you very much in advance.
Following is the stack trace:
Message: void oracle.jbo.html.DataSourceImpl.(java.lang.String)
java.lang.NoSuchMethodError: void oracle.jbo.html.DataSourceImpl.(java.lang.String)
at oracle.jbo.html.jsp.datatags.Utils.createDataSource(Utils.java:185)
at oracle.jbo.html.jsp.datatags.DataSourceTag.doStartTag(DataSourceTag.java:86)
at Login.jspService(Login.jsp:61)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:347)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
And following is the debug output (excepted to conserve apace):
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\Jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config>
C:\Jdev1012\jdk\bin\javaw.exe -ojvm -XXdebug,quiet,port3096 -classpath C:\Jdev1012\j2ee\home\oc4j.jar;C:\Jdev1012\jdev\lib\jdev-oc4j.jar -Djbo.debugoutput=console -Xverify:none -Ddisable.checkForUpdate=true -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doracle.dms.sensors=NONE -Doc4j.jms.usePersistenceLockFiles=false com.evermind.server.OC4JServer -config C:\Jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Debugger connected to local process.
05/01/31 16:52:18 Auto-deploying file:/C:/Jdev1012/jdev/mywork/LtcopWebApp/jspClients/public_html/ (New server version detected)...
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 5218 ms.
Target URL -- http://204.156.227.22:8988/ltcop/index.html
05/01/31 16:52:19 Oracle Application Server Containers for J2EE 10g (10.1.2.0.0) initialized
05/01/31 16:52:31 Diagnostics: (BC4J Bootstrap) Routing diagnostics to standard output (use -Djbo.debugoutput=silent to remove)
05/01/31 16:52:31 [00] Diagnostic Properties: Timing:false Functions:false Linecount:true Threshold:6
05/01/31 16:52:31 [01] BC4J Property jbo.maxpoolcookieage='-1' -->(Configuration) from System Default
05/01/31 16:52:31 [02] Loading 5.0 IDE classes
05/01/31 16:52:31 [03] Creating a new pool resource
05/01/31 16:52:31 [04] BC4JDeployPlatform: LOCAL
05/01/31 16:52:31 [05] Propertymanager: searching for file and system based properties
05/01/31 16:52:31 [06] {{ begin Loading BC4J properties
â¦â¦.. Cut away to conserve space â¦â¦.
05/01/31 16:52:32 [135] }} finished loading BC4J properties
05/01/31 16:52:32 [136] -----------------------------------------------------------
05/01/31 16:52:32 Diagnostics: (Properties (re)loaded) Routing diagnostics to standard output (use -Djbo.debugoutput=silent to remove)
05/01/31 16:52:32 [137] Diagnostic Properties: Timing:false Functions:false Linecount:true Threshold:6
05/01/31 16:52:32 [138] JavaVMVersion: 10.1.2.1162 dop5
05/01/31 16:52:32 [139] JavaVMVendor: Oracle Corp.
05/01/31 16:52:32 [140] JavaVMName: OJVM Client VM
05/01/31 16:52:32 [141] OperatingSystemName: Windows 2000
05/01/31 16:52:32 [142] OperatingSystemVersion: 5.0
05/01/31 16:52:32 [143] OperatingSystemUsername: Duz
05/01/31 16:52:32 [144] jbo.323.compatible Flag: false, str: false
05/01/31 16:52:32 [145] jbo.903.compatible Flag: false, str: false
05/01/31 16:52:32 [146] Loading from bc4j.jpx file
05/01/31 16:52:32 [147] Loading from individual XML files
â¦â¦.. Cut off lots of âLoading from â¦â¦ Xxx.xml fileâ entries to conserve space â¦â¦.
05/01/31 16:52:36 [248] Using DatabaseTransactionFactory implementation oracle.jbo.server.DatabaseTransactionFactory
05/01/31 16:52:36 [249] mPCollUsePMgr is false
05/01/31 16:52:36 [250] ViewObjectImpl.mDefaultMaxRowsPerNode is 70
05/01/31 16:52:36 [251] ViewObjectImpl.mDefaultMaxActiveNodes is 30
05/01/31 16:52:36 [252] DBTransactionImpl Max Cursors is 50
05/01/31 16:52:36 [253] Created root application module: 'componentsPkg.LtcopAppModule'
05/01/31 16:52:36 [254] Locale is: 'en_US'
05/01/31 16:52:36 [255] DefaultConnectionStrategy is establishing an application module connection
05/01/31 16:52:36 [256] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
05/01/31 16:52:36 [257] Creating a new pool resource
05/01/31 16:52:36 [258] Trying connection/2: url='jdbc:oracle:thin:@204.156.200.100:1521:DB20' info='{user=ltc_test_co1, password=ltcco1, oracle.net.encryption_types_client=( DES40C ), oracle.net.encryption_client=REQUIRED, oracle.net.crypto_checksum_client=REQUIRED, oracle.net.crypto_checksum_types_client=( MD5 )}' ...
05/01/31 16:52:36 [259] Successfully logged in
05/01/31 16:52:36 [260] JDBCDriverVersion: 10.1.0.3.0
05/01/31 16:52:36 [261] DatabaseProductName: Oracle
05/01/31 16:52:36 [262] DatabaseProductVersion: Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production With the Partitioning, Oracle Label Security, OLAP and Oracle Data Mining options JServer Release 9.2.0.6.0 - Production
05/01/31 16:52:36 [263] **PCollManager.resolveName** tabName=PS_TXN
05/01/31 16:52:36 [264] Getting a connection for internal use...
05/01/31 16:52:36 [265] Creating internal connection...
05/01/31 16:52:36 [266] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
05/01/31 16:52:36 [267] Creating a new pool resource
05/01/31 16:52:36 [268] Trying connection/1: url='jdbc:oracle:thin:ltcop/[email protected]:1521:db20'...Sometimes the hardest problems have the easiest solutions...because the user is stupid. Yeah, thats me. Somehow I had saved an Aperture 3 trial serial number in a text file and was copying-and-pasting that instead of the serial number printed in my retail packaging.
The AppleCare rep Christian was a great help in discovering the problem. Correct serial number worked like a charm. Text file updated for future reference.
Lesson here: always check the details; make no asusmptions.
Thanks all, including Christian! -
Problem migrating Toplink Workbench project from 9.0.4.5 to 10.1.3.1.0
Hi all,
I am having problems migrating my Toplink Workbench project from 9.0.4.5 to 10.1.3.1.0! I used the Toplink Workbench to open and convert the existing project. The conversion succeeded, but when I tried to export the mappings I got this:
java.lang.NullPointerException
at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalPrimaryKeyPolicy.adjustRuntimeDescriptor(MWRelationalPrimaryKeyPolicy.java:174)
at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalTransactionalPolicy.adjustRuntimeDescriptor(MWRelationalTransactionalPolicy.java:85)
at oracle.toplink.workbench.mappingsmodel.descriptor.MWDescriptor.buildRuntimeDescriptor(MWDescriptor.java:423)
at oracle.toplink.workbench.mappingsmodel.descriptor.MWMappingDescriptor.buildRuntimeDescriptor(MWMappingDescriptor.java:860)
at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalClassDescriptor.buildRuntimeDescriptor(MWRelationalClassDescriptor.java:791)
at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWTableDescriptor.buildRuntimeDescriptor(MWTableDescriptor.java:955)
at oracle.toplink.workbench.mappingsmodel.project.MWProject.buildRuntimeProject(MWProject.java:932)
at oracle.toplink.workbench.mappingsmodel.project.MWProject.exportDeploymentXML(MWProject.java:804)
at oracle.toplink.workbench.mappingsplugin.ProjectDeploymentXmlGenerationCoordinator.exportProjectDeploymentXml(ProjectDeploymentXmlGenerationCoordinator.java:46)
at oracle.toplink.workbench.mappingsplugin.ExportDeploymentXmlAction.execute(ExportDeploymentXmlAction.java:27)
at oracle.toplink.workbench.framework.action.AbstractFrameworkAction.actionPerformed(AbstractFrameworkAction.java:134)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:480)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Anyone seen this error before? This is very critical for us. Please help. Thanks.
Regards,
gkk1969I am seeing the same problem when i try to do Export to Java Source
java.lang.NullPointerException
at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalPrimaryKeyPolicy.adjustRuntimeDescriptor(MWRelationalPrimaryKeyPolicy.java:174)
at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalTransactionalPolicy.adjustRuntimeDescriptor(MWRelationalTransactionalPolicy.java:85)
at oracle.toplink.workbench.mappingsmodel.descriptor.MWDescriptor.buildRuntimeDescriptor(MWDescriptor.java:423)
at oracle.toplink.workbench.mappingsmodel.descriptor.MWMappingDescriptor.buildRuntimeDescriptor(MWMappingDescriptor.java:860)
at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalClassDescriptor.buildRuntimeDescriptor(MWRelationalClassDescriptor.java:791)
at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWTableDescriptor.buildRuntimeDescriptor(MWTableDescriptor.java:955)
at oracle.toplink.workbench.mappingsmodel.project.MWProject.buildRuntimeProject(MWProject.java:932)
at oracle.toplink.workbench.mappingsmodel.project.MWProject.exportProjectSource(MWProject.java:824)
at oracle.toplink.workbench.mappingsplugin.ProjectSourceGenerationCoordinator.exportProjectSource(ProjectSourceGenerationCoordinator.java:68)
at oracle.toplink.workbench.mappingsplugin.ExportJavaSourceAction.execute(ExportJavaSourceAction.java:31)
at oracle.toplink.workbench.framework.action.AbstractFrameworkAction.actionPerformed(AbstractFrameworkAction.java:134)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100) -
Problems migrating data via LSMW using the IDoc method
Hello everybody,
I got a very strange problem migrating data via the LSMW. I tried to map legacy data using the IDoc mapping method. I'm using the message type 'CRMXIF_PARTNER_SAVE_M ' and the basic IDoc type 'CRMXIF_PARTNER_SAVE_M01'.
I can read the import data and convert it to IDoc structure as well as generate the IDoc. When I start processing the IDoc afterwards I get always the same error messages which I don't understand...
The errors are:
1) Error status 'A ' calling validation service (Status 51)
2) Validation error occurred: Module CRM_BUPA_MAIN_VAL , BDoc type BUPA_MAIN (Status 51)
3) Error_Time Dependency_Addresses CHECK_TABLE_MISSING (Status 51)
4) Internal error when calling operation module BUA_CHECK_ADDRESS_VALIDITY_ALL : Check table missing (Status 51)
5) Address moves ignored in the case of time-independent systems (Status 51)
6) Partner data processed with key PartnerGUID 4BF67ADE9B9923BEE10000000A3500DB (Status 51)
7) Partner (4BF67ADE9B9923BEE10000000A3500DB ): the following errors occurred (Status 51)
I tried to import the following data:
external ID
Name1
Name2
Address data
Telephone data
Fax data
Website data
Can anybody tell me where those errors come from and how I can fix them. Would be great if somebody could help me!
Thank you and best regards,
Markusso apparently my issue with this was setting the time zone in the Address to the time zone of the user doing the conversion. You can find the time zone in SU01.
Also you can create a BP in the WebUI then check t-code SMW01 and it will help you on passing the values to CRMXIF_PARTNER_SAVE
Edited by: Akeem Lockett on Jul 8, 2010 7:44 AM -
Problems migrating a playlist into iTunes...
Hi folks,
I am having very frustrating problems migrating some music into my iTunes library and making it into a playlist which will display the tracks in the way that I want. I might not know some technical terms here, but I will try to be as clear and concise as possible!
I have some music (the 'Glee' TV show soundtrack)that I downloaded elsewhere (i.e not from iTunes), and I just want to move it into an iTunes playlist, to display the tracks in the 'standard' way- that is, all in one 'block', numbered and sequenced in the correct running order.
So all I did is exactly what I have done before: created a new playlist from the iTunes 'file' menu, given the playlist a name, then dragged and dropped each track from the folder that I downloaded the music into originally. So in this case- I dragged and dropped each track from it's location in a folder called 'J Girl music', which is where I download music for my girlfriend to.
Now, I don't know whether the fact that the soundtrack is by a bunch of different artists (rather than just one) is part of the problem here, but what I get when I drag and drop into the iTunes 'Glee' playlist (using 'as list' as my 'view' option) is the tracks in the playlist displayed in 'clusters'.
So the first two tracks appear in one separate, delineated box then the next two in a separate, delineated box and so on (kind of like having a number of individual albums within the playlist)- and each 'block' has its own separate album art displayed to the left. I hope people can visualise what I mean here- things seem easy to explain until you try to put them into words!
So really all I want is for the 'Glee' playlist to be the same as my other ones-the tracks in one 'block' with no boxes separating them and sequenced in the correct order.
I have tried a number of things to fix this: I have right-clicked on tracks (both from the playlist and the library) gone into 'info' and numbered them e.g 1 of 18, 2 of 18, etc. I have changed the info about artist to the heading 'various artists', I have tried checking the box that says 'part of a compilation', but no matter what I seem to do tracks 3,4,5 etc will not 'jump' and sit themselves directly underneath tracks 1 and 2- the 'boxes' dividing them remain!
I hope I have explained this problem clearly (I really tried to) and I would be very appreciative of any help a forum member or members can provide. Thanks in advance.Hi folks,
I am having very frustrating problems migrating some music into my iTunes library and making it into a playlist which will display the tracks in the way that I want. I might not know some technical terms here, but I will try to be as clear and concise as possible!
I have some music (the 'Glee' TV show soundtrack)that I downloaded elsewhere (i.e not from iTunes), and I just want to move it into an iTunes playlist, to display the tracks in the 'standard' way- that is, all in one 'block', numbered and sequenced in the correct running order.
So all I did is exactly what I have done before: created a new playlist from the iTunes 'file' menu, given the playlist a name, then dragged and dropped each track from the folder that I downloaded the music into originally. So in this case- I dragged and dropped each track from it's location in a folder called 'J Girl music', which is where I download music for my girlfriend to.
Now, I don't know whether the fact that the soundtrack is by a bunch of different artists (rather than just one) is part of the problem here, but what I get when I drag and drop into the iTunes 'Glee' playlist (using 'as list' as my 'view' option) is the tracks in the playlist displayed in 'clusters'.
So the first two tracks appear in one separate, delineated box then the next two in a separate, delineated box and so on (kind of like having a number of individual albums within the playlist)- and each 'block' has its own separate album art displayed to the left. I hope people can visualise what I mean here- things seem easy to explain until you try to put them into words!
So really all I want is for the 'Glee' playlist to be the same as my other ones-the tracks in one 'block' with no boxes separating them and sequenced in the correct order.
I have tried a number of things to fix this: I have right-clicked on tracks (both from the playlist and the library) gone into 'info' and numbered them e.g 1 of 18, 2 of 18, etc. I have changed the info about artist to the heading 'various artists', I have tried checking the box that says 'part of a compilation', but no matter what I seem to do tracks 3,4,5 etc will not 'jump' and sit themselves directly underneath tracks 1 and 2- the 'boxes' dividing them remain!
I hope I have explained this problem clearly (I really tried to) and I would be very appreciative of any help a forum member or members can provide. Thanks in advance. -
When I bought my Mac Air OSX Version 10.9.2 my daughter helped me migrate the contents of my previous macbook. But in the process seems to have duplicated the iTunes library - How do I get rid of one. The start up disk is almost full and plus it doesn't synch properly with my iPhone 4S. Please help!
Hello nicky:
You should run repair disk from your software install DVD before you try anything else. The crash may have damaged some of your directories - and a possible cause of the "missing/not missing" tunes.
Barry -
Need help in migration from Layer2 to layer3
HI Guys
Need u r help in migration from layer2 switched network to layer3.
here is the setup there are 9 sites connected with a 10gig backbone in a ring.each site has a 6513 but at the data centre site we having two 6513.we are having a combination of voice and data vlans.at present all the sites are connected with layer2 trunks.all the trunks are teminated at the core ie datacentre site.so how should i procedd and what are the advantages of it ie migration.
Thanks
MahmoodFor this migration you first need to assign IP addresses to your connections between switches. This could be /30 (or /31, if supported) subnets. You should also consider running some dynamic routing protocol such as OSPF between switches.
Hope this helps. -
please help problem with importing a file error output "there was an error decompressing audio or video"
this is related to what adobe program/version?
-
Problem migrating from JSF Mojarra 1.2 to 2.0
As my subject suggests, I am having a problem migrating from JSF 1.2 to JSF 2.0.
As a first step, all that I had done was to replace both 'jsf-api.jar' and 'jsf-impl.jar' with the newer version 2.0 and restart my server.
As expected, server failed to publish with the following error message on the console. Any hint on solving this issue is highly appreciated.
The error message goes as below:
<Jun 30, 2009 10:31:54 AM PDT> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application D:\MalcolmX\web. Please make sure that the annotations are valid. The error is com.sun.faces.taglib.jsf_core.BeanValidatorTag>
<Jun 30, 2009 10:31:54 AM PDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application '_auto_generated_ear_' due to error weblogic.application.ModuleException: Failed to load webapp: '/'.
weblogic.application.ModuleException: Failed to load webapp: '/'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: com.sun.faces.taglib.jsf_core.BeanValidatorTag
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
Thanks.SirG wrote:
As expected, server failedWow :P
The error message goes as below:
java.lang.ClassNotFoundException: com.sun.faces.taglib.jsf_core.BeanValidatorTagIs it in classpath? Exception says it is not.
Don't you have some JSF 1.2 libraries around somewhere else in classpath? Appserver/lib? JDK/lib? Etc. You might have a mix of JSF 1.2 and JSF 2.0 in the classpath and the exception is just been caused by this collision. -
Problems migrating project in JDeveloper
Hello OraclALL,
I am having problems migrating my project from JDeveloper 10.1.2 to version 10.1.3.
Actualyl the problem is specific to the UML diagramas. It was able to correctly convert the Class Diagram and ER Diagram, but did not work with Use Case Diagram neither with Activity Diagrams.
Is there something I can do to import, convert or migrate my project with all diagrams included?
ThanksThere is nothing special to be done to migrate those uml diagrams. The migration which succeeded in migrating your other diagrams should also have migrated the use case and activity diagrams.
You say that it did not work for use case and activity, could you describe what the problem is with those diagrams ?
If there was some error dialogs, exceptions during the migration process or when you try to open those diagrams ... could you also describe/paste them ?
Alternatively you can send all this information to me.
Thanks very much.
Dominique -
Post Moved BT Broadband Desktop help problem
Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/BT-Broadband-Desktop-Help-problem/td-p/46973
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’Hi FrankC
I am sorry this still a problem.
If you could drop me an email please with your BT account and telephone number along with a link back to this thread I'll get this sorted out for you.
Just send to the address in my profile.
With regards to the thread being marked as solved as the original poster you can unmark the thread as solved. Just select 'Options' at the top right of the post. KerryG has posted up a pretty useful guide on this here.
Cheers
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Problems migrating from edir 8.7.3 to 8.8
Hi,
I need to do a hardware replace for a Netware 6.5 sp 8 server. This
server has edir 8.7.3.10. I loaded a new Proliant server with NW6.5 sp
8 to migrate to. The new server has edir 8.8 on it. The Migration
Wizzard guide says there can be problems migrating from NW6.5 from an
edir 8.7 to 8.8.
I tried to install the new server using the [INST: spedir] option
specifie in this article
(http://www.novell.com/communities/no...edirectory-873)
but the server keeps crashing.
Can I mirgate my old server edir 8.7.3 to the new one 8.8 using the
Migration Wizzard? If not is there any other way to force an install
of edir 8.7.3?
thanksYou could upgrade your eDir on the "original" server to 8.8
I've done that before without any problems.
(obviously this doesn't guarantee it will go right/well). Always have a complete backup of the .dib set (I use the dsrepair -rc on NetWare) as well as a "snapshot" of teh NetWare server if possible (ours is on the SAN, so I can clone the system disk before I do anything to it). -
Problem migrating user account SID
Problem migrating user account SID
I’m trying to migrate user accounts SID from a Windows 2003 domain to a Windows 2008 domain using the command line admt.exe. There is a trust between the 2 domains and I’m able to migrate a user account using admt 3.1 wizard including SID. The wizard asks me for a user account in the source domain with administrative right for the SID migration. In the wizard I use the same credentials as my current session. This works fine!!
But, when I’m using the command line “admt user” in an administrative cmd box i’m not prompted for any credentials in the source domain. My current credentials have the proper right in the source domain so that should not be any problem but admt is not able to migrate the user SID and gives the following error:
ERR2:7615 SID History cannot be updated for xxxxx. You must be an administrator in the source domain
Any ideas ??I to am seeing this error - running on a Target DC.
Command line: admt group /O: GroupOption2.txt /F: test.txt /TO:corporate/Groups
Option File:
[Migration]
SourceDomain=Source.com
TargetDomain=corp.target.com
PasswordOption=Copy
PasswordServer=blade3.source.com
ConflictOptions=MERGE
[User]
MigrateSIDs=Yes
[Group]
MigrateSIDs=Yes
UpdatePreviouslyMigratedObjects=Yes
FixGroupMembership=Yes
MigrateMembers=No
UpdateUserRights=YES
[Security]
TranslationOption=Add
Error from the logs:
2010-02-15 11:47:14 ERR2:7615 SID History cannot be updated for test group deleteme. You must be an administrator in the source domain.
The account I am logged in to the target DC is a member of the Administrators group on both domains and of the Domain Admins on the source.
Any ideas? Searching (with Bing and that other one) only turns up two relevant hits, this thread and a win2000 tech net article.
Extra info:
Source: Windows 2003 (OS) - Windows 2000 native functional levels (domain and forest)
Target: Windows 2008 (OS) - Windows 2003 functional
Sorry for the retarded formatting. -
Upgrading JDeveloper 9052 to 1012 and centrino problems?
I have recently purchased a new laptop with the following specification:
Dell 9300
Centrino 1.8
1Gb DDR2
ATI x300 128Mb
60Gb Hard Drive
Windows XP SP2 + all updates
to replace my previous development machine.
I have experienced the following problems when running JDeveloper on it and I'd appreciate your assistance in rectifying them.
1. I installed JDeveloper 9052 on my laptop and tried to run an ADF based application that I have got running on many other development machines and a 904 server. When I ran the application on my laptop it worked fine until it reached the point within the application that created an inputStream from a URL - where it failed. I know that it fails exactly at this point after spending some time debugging the code. I found this very strange as I could successfully view the content of the URL in a web browser.
2. In an attempt to find a solution to point 1. (see above) I installed version 1012 of JDeveloper. I tried to open the existing project that I had created in 9052 and when prompted agreed to convert it to the new format. Then without opening or editing any of the files I successfully ran the applicaiton by right clicking on the view controller within the project (applicaiton navigator panel) and selecting run from the context menu. The application ran successfully without any problems at this stage.
HOWEVER, I then opened up the struts-config pageflow diagram and tried running it from there, the project failed.
After studying the struts-config file both before and after I had opened it within 1012 I found the following discrepancy:
BEFORE: - - - - -
<action path="/getParams" className="oracle.adf.controller.struts.actions.DataActionMapping" type="view.GetParamsAction" name="DataForm">
AFTER: - - - - -
<action path="/getParams" className="oracle.adf.controller.struts.actions.DataActionMapping" type="view.GetParamsAction" name="DataForm" parameter="unknown">
After manually removing this line of code I was able to get the application to run again. However every time I edit/view the struts config file or indeed save changes and reboot JDeveloper the parameter="unknown" line is added again and prevents the project from running.
3. After further investigative work following point 2. I came across what I believe to be a further bug.
When I reopened JDeveloper I noticed that the struts-config pageflow diagram had changed. A dataAction had been replaced by a dataPage as well as the extra line of code being added as described in point 2. The pageflow diagram should be dataPage --> dataAction --> dataPage but now it was dataPage --> dataPage --> dataPage.
After further investigation I found a descrepancy in the following file before and after I had opened it in 1012. The nominalHeaderXml4\ViewController\model\StrutsPageFlow.oxd_struts file changed from this ....
<shape name="/getParams">
<elemRef name="" value="3d2b2d0e-0104-1000-8008-c222e564ea8e::/getParams::StrutsDataAction" type="StrutsDataAction" class="o:b:CID"/>
</shape>
to this when I had opened it 1012.
<shape name="/getParams">
<elemRef name="" value="51d65a60-0104-1000-8003-c222e56470a8::/getParams::StrutsDataForwardAction" type="StrutsDataForwardAction" class="o:b:CID"/>
</shape>
I have speant the last 2 days looking into these problems. I have found that both points 2 and 3 happen consistantly when opening 9052 projects in the 1012 environment. And have elimated the following things when trying to get JDeveloper 9052 to work correctly, firewalls, antivirus, windows updates, and software conflicts. The only difference that I can identify is that my new machine uses a centrino chip and my old one used a P4.
I hope that someone will be able to shed some light on these problems for me as soon as possible. Thanks in advance for your help.
David
David FergusonThe struts-related observation is noted in the JDeveloper 10.1.2 Release Note Addendum:
http://www.oracle.com/technology/products/jdev/htdocs/10.1.2.0.0/readme_10.1.2.0.0_addendum.html#jan1
For the 1st issue, I'd recommend opening a TAR with metalink so our worldwide support engineers can help diagnose the problem. I've not heard of any Centrino specific issues to date. -
Please Help!!!!! Problem Migrating from sql 2000 stored procedure to PL/SQL
I have used a tool to convert my sql 2000 stored procedure to Oracle 10g PL/SQL, here is an example
SQL 2000 Stored Procedure
CREATE PROCEDURE [GetEmployees]
AS
Select * from EMPMST ORDER BY emp_name
GO
After Transformation i got 2 files, one was a procedure and other a package
CREATE OR REPLACE PACKAGE GLOBALPKG
AS
TYPE RCT1 IS REF CURSOR;
TRANCOUNT INTEGER := 0;
IDENTITY INTEGER;
END;
CREATE OR REPLACE PROCEDURE GetEmployees
RCT1 IN OUT GLOBALPKG.RCT1
AS
BEGIN
OPEN RCT1 FOR
SELECT *
FROM EMPMST
ORDER BY emp_name;
END;
When i execute the procedure GetEmployees i got this error :
SQL> execute GetEmployees;
BEGIN GetEmployees; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'GETEMPLOYEES'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Please Help me in debugging this error. Thanks in advance.As the poster above mentioned you cannot call "GetEmployees" without a parameter.
Note that the procedure declaration has the following line
RCT1 IN OUT GLOBALPKG.RCT1
This means that whenever you want to call the procedure you must pass it a variable of type GLOBALPKG.RCT1
However unless this is merely a homework or learning exercise (i.e. you are not porting the code of a production application) i would strongly recommend that you do not attempt to simply convert the code to PL/SQL.
The reasoning behind this is that Oracle's architecture will be completely different to the source of the original code and if you attempt to simply port the code (especially using an automatic tool) you will almost certainly hit problems.
For example the SQL Server's 2000 code may (should be) be written based on SQL Server's locking strategy. Oracle's locking strategy is completly different if you try to use the same techniques as you do in SQL Server the performance will suffer.
Porting a code or a database schema from one platform to another involves a lot of analysis in order to take advantage of the features of the destination platform.
As I said this may not be important to you depending on why you are attempting a port.
Good Luck.
Maybe you are looking for
-
LOGICAL DATABASE IN HR ABAP PRPGRAMMING
Hi Friends, what is use of LOGICAL DATABASE IN HR ABAP PROGRAMMING AND END-OF-SELECTION EVENT IN HR PROGRAMMING PROGRAMMING??? regards, vijay.
-
Configuration Failed - Could not load the file or assembly Microsoft.IdentityModel
I have followed the link "Setting up Sharepoint 2010 Development Environment on Windows 7" and while following the steps, I was not able to install one of the pre-requisite "Windows Identity Foundation (Windows6.1-KB974405-x64.msu)" which was downloa
-
When i type into the browser search bar, the text t y p e s .... v e r y s l o w l y
First and foremost, I have used several virus searches and nothing shows up. However, regularly, when I go to type in the browser Go To bar, to go to a new URL, the font will often stop and wait, sometimes up to 10 seconds PER character
-
Transfering photos with titles, comments, etc between computers
I have a MacBook and an iMac. The iMac is my primary computer and has the larger hard drive. I store all my pictures on the iMac. When I am on the road, I like to update my photos by adding titles, comments, and keywords. Is there a way I can take a
-
MIRO (accounting document not showing)
Dear Guru's When ever we save the miro transaction one miro document will generate and inside accounting document, profit center and controling document will generate. my problem is when we save the miro document bottom of that screen miro document