[HELP] Problem with restore and recovery to new host
Hi, guys!
I have been trying for two days, but still cannot get it to work.
I have taken a full hot(online) backup with archive logs as well as the control file and SPFILE, and then copied the backup to the new host with the same directory structure and settings. Finally, I have tried to restore & recover the database on the new host but failed during the restore process.
Both the original host and the new host have the same Oracle installed down to the patch level. I couldn't figure out the proper solution to this problem base on my limited knowledge about Oracle DB.
Could anyone help me out here? Any advice would be appreciated!
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATADATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 11:41:33
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Here is some extra information that you might want to know about:
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 PRODDB 3774691295 PARENT 1 17-APR-07
2 2 PRODDB 3774691295 PARENT 521803 06-OCT-11
3 3 PRODDB 3774691295 PARENT 1595143 20-OCT-11
4 4 PRODDB 3774691295 PARENT 1600974 20-OCT-11
5 5 PRODDB 3774691295 PARENT 1952053 27-OCT-11
6 6 PRODDB 3774691295 CURRENT 2146951 07-NOV-11
RMAN> list backup recoverable;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 822.34M DISK 00:29:47 07-NOV-11
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20111107T175037
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSTEM01.DBF
2 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\UNDOTBS01.DBF
3 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSAUX01.DBF
4 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\USERS01.DBF
5 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA01.DBF
6 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA02.DBF
7 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX01.DBF
8 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX02.DBF
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
SPFILE Included: Modification time: 07-NOV-11
BS Key Size Device Type Elapsed Time Completion Time
39 18.46M DISK 00:00:05 08-NOV-11
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093359
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_.BKP
List of Archived Logs in backup set 39
Thrd Seq Low SCN Low Time Next SCN Next Time
1 1 2146951 07-NOV-11 2149493 07-NOV-11
1 2 2149493 07-NOV-11 2149519 07-NOV-11
1 3 2149519 07-NOV-11 2149565 07-NOV-11
1 4 2149565 07-NOV-11 2149641 07-NOV-11
1 5 2149641 07-NOV-11 2172859 07-NOV-11
1 6 2172859 07-NOV-11 2197851 07-NOV-11
1 7 2197851 07-NOV-11 2220349 08-NOV-11
1 8 2220349 08-NOV-11 2222621 08-NOV-11
1 9 2222621 08-NOV-11 2222729 08-NOV-11
1 10 2222729 08-NOV-11 2223088 08-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
SPFILE Included: Modification time: 08-NOV-11
Thanks in advance!
Jay
Thank you for your reply,Hemant K Chitale!
>
a) Does the directory structur exist on the new server :
D:\DBDATA\PRODDB\ --- for files 1 to 4
D:\ --- for file 5
D:\ORA_DATA\ --- for files 6 to 8
>
Yep, I have doubled check the directory structure that get in the way, and they are all exist.
Would it be something to do with the folder permissions?
>
b) Apparently a RESETLOGS has been issued on 07-Nov. Which controflile backup do you have restored and mounted on the new server ? It should be the one after the RESETLOGS.
>
I restored the one included with the backup. Should I take another backup of controlfile seperately and restore from it instead?
>
(I assume that you did a RESTORE CONTROLFILE followed by sql "alter database mount" before the attempt to RESTORE DATABASE)
>
Yep, that's exactly what I did.
//executed @ RMAN prompt of the new host
startup nomount; 'the new host has the right SPFILE to start with so i didn''t bother to RESTORE SPFILE first.
restore controlfile from autobackup;
alter database mount;
restore database sequence 10 thread 1;
//get stucked here with RMAN-06026, 06023
//...the following is not executed yet.... :-(
recover database until sequence 10;
alter database open resetlogs;Edited by: HappyJay on 2011/11/08 13:25
I have made several attemps with your advice, but still get the same type of errors.
Here is the output:
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
+\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP+
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
as you suggested, this backup piece of controlfile should be right one to be restored.
RMAN> shutdown;
database dismounted
Oracle instance shut down
RMAN> startup nomount;
connected to target database (not started)
Oracle instance started
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 364907424 bytes
Database Buffers 121634816 bytes
Redo Buffers 2899968 bytes
RMAN> restore controlfile from autobackup;
Starting restore at 08-NOV-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
recovery area destination: C:\oracle\product\10.2.0\flash_recovery_area
database name (or database unique name) used for search: PRODDB
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AR
EA\PRODDB\AUTOBACKUP\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
channel ORA_DISK_1: control file restore from autobackup complete
output filename=D:\DBDATA\PRODDB\CONTROL01.CTL
output filename=D:\DBDATA\PRODDB\CONTROL02.CTL
output filename=D:\DBDATA\PRODDB\CONTROL03.CTL
Finished restore at 08-NOV-11
tried shutdown normally and mount again instead.
RMAN> shutdown;
Oracle instance shut down
RMAN> exit
Recovery Manager complete.
C:\>rman target /
Recovery Manager: Release 10.2.0.3.0 - Production on Tue Nov 8 13:49:42 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 369101728 bytes
Database Buffers 117440512 bytes
Redo Buffers 2899968 bytes
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
Starting implicit crosscheck backup at 08-NOV-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 3 objects
Finished implicit crosscheck backup at 08-NOV-11
Starting implicit crosscheck copy at 08-NOV-11
using channel ORA_DISK_1
Crosschecked 2 objects
Finished implicit crosscheck copy at 08-NOV-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP\2011_11_
08\O1_MF_S_766661651_7CJY84LK_.BKP
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATA\DATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
//however, still get the same results(ended up with errors)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 13:50:29
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Edited by: HappyJay on 2011/11/08 13:59
Similar Messages
-
Problem with Rescue and Recovery after installing Norton Internet Security 2010
Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
Speaker problem with t420i and adding a new graphics card question
I bought a t420i about a month ago and noticed that the speakers could not properly handle muliple sounds at once. What happens is that, say in a music video, the music plays loud and clear, but once the lyrics start the background music fades a bit to about 85% of it's original volume. I had returned the laptop because of this problem but the replacement I got has the SAME exact problem.
In case im not clear, try this example. You know the beeping noise you get when you press an incompatible set of keys? ( like g, h, and b). When I have this noise going simultaneously with a song, the song's sound fades a bit.
This does not happen with headphones, therefore i believe the problem is with the way the speakers are programmed.
Also, if I bought a t420 with just integrated graphics, could I still add a new graphics card? Or can you only add a new graphics card to a thinkpad that initially comes with discrete graphics?I think the main purpose of the nvs4200m is the ability to use three displays (internal + 2 external). Additionally, nVidia has better driver support for games so even though it is around the same speed, the drivers are better.
The shared ram is still used, unless you disable the HD3000 in the BIOS and run with only the nvs4200m at all times.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3. -
Problem with Javascript and opening a new page
Hi,
I'm developping a website with Java Server Faces.
I've a problem with JavaScript.
I have a table, and each row of that table, has a button, to display more information about that specific row. I want to display this information in a new window. For this I want to use JavaScript.
The new window, of course, needs some information of the other window, to show the right data.
The first time I click the 'more-information-button', it works perfectly, but from than on, he keeps showing the same information...
Here is my jsp-page of the first page (the one with the table):
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
<f:view>
<f:loadBundle basename="languages.MessageBundle" var="bundle"/>
<html>
<head>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<title>- UCV-Period -</title>
<link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
</head>
<body style="-rave-layout: grid">
<h:dataTable binding="#{UcvPeriod.dataTable1}" headerClass="list-header" id="dataTable1" rowClasses="list-row-even,list-row-odd" rows="5"
style="left: 24px; top: 168px; position: absolute" value="#{UcvPeriod.dataTable1Model}" var="currentRow">
<h:column binding="#{UcvPeriod.column1}" id="column1">
<h:outputText binding="#{UcvPeriod.outputUcvPeriod}" id="outputUcvPeriod" value="#{currentRow['UCVPERIOD']}"/>
<f:facet name="header">
<h:outputText binding="#{UcvPeriod.outputText2}" id="outputText2" value="#{bundle.ucvPeriod_columnHeader_ucvPeriod}"/>
</f:facet>
</h:column>
<h:column binding="#{UcvPeriod.column11}" id="column11">
<h:commandButton action="#{UcvPeriod.btnDetails_action}" binding="#{UcvPeriod.btnDetails}" id="btnDetails" value="+" onclick="window.open('Details.jsp')"/>
<f:facet name="header">
<h:outputText binding="#{UcvPeriod.outputText21}" id="outputText21" value=""/>
</f:facet>
</h:column>
</h:dataTable>
</h:form>
</body>
</html>
</f:view>
</jsp:root>Here is my action, when someone clicks on the 'more-information-button':
public String bthnDetails_action() {
Object s = outputUcvPeriod.getValue();
BigDecimal ucvPeriod = (BigDecimal)outputUcvPeriod.getValue();
this.getSessionBean().setUcvPeriod(new Integer(ucvPeriod.intValue());
return "detail_ucvperiod";
}Here is my constructor of the Detailspage.
public Details() {
this.txtUcvPeriod.setValue(this.getSessionBean().getUcvPeriod());
}Here is the navigation part for this part of my faces-config.xml .
<navigation-rule>
<from-view-id>/UcvPeriod.jsp</from-view-id>
<navigation-case>
<from-outcome>detail_ucvperiod</from-outcome>
<to-view-id>/UcvPeriod.jsp</to-view-id>
</navigation-case>
</navigation-rule>Thx a lot....
AnnekeSee the tutorial "Sharing Data Between Two Pages" at http://devservices.sun.com/premium/jscreator/standard/learning/tutorials/data_sharing_twopages.html and the FAQ "How can I pass data between pages without creating SessionBean variables in Creator?" at http://devservices.sun.com/premium/jscreator/standard/reference/faqs/technical/javasource/passing_data.html. Since you can open a new window when your button is clicked, the tutorial and FAQ will explain ways to pass your data to the new window.
-
Problems with ARD and headless MacMini (new 1,66 DualCore)
Hi,
i would like to set my brandnew MacMini 1,66 as webserver.
And there the problem starts: when the MacMini runs headless (without monitor attached) it thinks that there is a television attached and i get a very distorted screen when connecting via ARD 2.2. Attaching the DVI-VGA adapter does not help!
How can i tell the Mini to switch to a "normal" resolution without attaching a monitor?
I seems not to be very useful to connect a monitor to a computer that is supposed to run headless...
HELP!!!
1.66GHz Intel Core Duo processor Mac OS X (10.4.7) ARD 2.2I have the exact same problem with two PowerMac G5's. I need to have full resolution on the remote G5 which has no monitor connected, but only get to choose between PAL and NTSC TV resolution. This is really annoying, and in my opinion a major bug in ARD 3.1 and below. Why is the user forced to see such a small remote window if the remote computer is capable of much more?
-
Problems with Rescue and recovery
Hi,
I have a T500 (2082 52G) with XP running. Having had problems with some software I tried to use Rescue and Recovery 4 to recover from an earlier backup. However, the Recovery still is at 0 % after 3 hours. Do I have an opportunity to shut down the system or cancel the recovery without crashing anything? I read "Dont shut down during the process" at the beginning. As I am business user it is _most_ important not to loose any data.
Any reply is much appreciated!
Regards,
PeterHi,
any advice please ?
thx -
T43 problem with Rescue and Recovery
Hello
I have a small problem with the portable one t43, when i try to install the Rescue and Recovery, it gives me the following error:
Free sufficient space does not exist in the sector of starter to install the agent of Rescue and Recovery
there it is known solve someone like
thank yo in advance
Javier ArrattaI have the same problem with my T41. Is it possible to increase the size of the MBR?
Jim -
Please help meeee!! Problems with library and syncing on new laptop
Hi I've bought a new laptop and want to start using itunes on the new one, however:
Problem 1- Even though I've enabled both devices and have clicked on the home sharing, only the songs I have purchased from itunes show in my library and playlists (I managed to import my playlist titles by copying the file and emailing it to myself but it won't show songs other than those purchased from itunes) How can I get the library to show the 500 odd songs I've painstakingly spent importing to itunes on my old, slow laptop? If I have to do them all again I may just have a breakdown!!!
Problem 2- Have imported a CD into itunes library using my new laptop but it won't show on my ipod after syncing it. I think I have enough space cos the bottom bar says 3.26 GB free!
I'm really not very techie and don't use itunes much so there may be something glaringly obvious that I'm doing wrong. If anyone can help I'd really appreciate it
Thanks
CherylHome Sharing doesn't really matter, if you plan to stop using the old computer for iTunes.
Apple has this document
http://support.apple.com/kb/HT4527
You should use the method titled External drive. If you use this method, you can ignore the rest of the document.
The details are in the document, but to summarize this process (so that you have the "big picture" before reading the details)...
You are copying your iTunes folder from the old laptop to the external drive, and then copying that iTunes folder from the external drive to the new laptop. When you copy the iTunes folder to the new laptop, you are replacing the existing iTunes folder. The next time you start up iTunes on the new laptop, it will use the iTunes folder from the old laptop, and it should look like iTunes running on the old laptop.
When you read through the document, it may be easier to understand if you keep my "overview" in mind. Please ask any questions you may have about the "details" in the document.
NOTE: If you have new songs on the new laptop that are not in your old laptop's iTunes library, you need to keep the existing iTunes folder on the new laptop. After you have successfully transfered your iTunes folder from the old laptop to the new laptop, and everything is OK when you run iTunes on the new laptop, THEN add the new songs. This is in the document.
You should put Problem 2 aside until the above is completed. -
Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...
I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson -
Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!
I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.
-
Problems with SwingWorker and classes in my new job, ;), can you help me?
Hi all, ;)
First of all, sorry about my poor English.
I have a problem with Swing and Threads, I hope you help me (because I'm in the firsts two weeks in my new job)
I have two classes:
Form1: Its a JPanel class with JProgressBar and JLabel inside.
FormularioApplet: (the main) Its a JPanel class with a form1 inside.
I have to download a file from a server and show the progress of the download in the JProgressBar. To make it I do this:
In Form1 I make a Thread that update the progress bar and gets the fole from the server.
In FormularioApplet (the main) I call to the method getDownloadedFile from Form1 to get the File.
THE PROBLEM:
The execution of FormularioApplet finishes before the Thread of Form1 (with download the file) download the file. Then, when I call in FormularioApplet the variable with the file an Exception: Exception in thread "AWT-EventQueue-1" java.lang.NullPointerException is generated.
First main begins his execution, then call to Form1 (a thread) then continues his execution and when the execution is finished ends the execution os Form1 and his thread.
How can I do for main class call the function and the Thread download his file after main class assign the file of return method?
How can I pass information froma class include an a main class. Form1 can't send to main (because main class made a Form1 f1 = new Form1()) any information from his end of the execution. I think if Form1 can say to main class that he finishes is job, then main class can gets the file.
I put in bold the important lines.
Note: My level of JAVA, you can see, is not elevated.
THANKS A LOT
Form1 class:
package es.cambrabcn.signer.gui;
import java.awt.HeadlessException;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.MalformedURLException;
import java.net.URL;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
public class Form1 extends javax.swing.JPanel {
//Variables relacionadas con la clase original DownloadProgressBar
private InputStream file;
private int totalCicles;
private int totalFiles;
private int currentProgress;
private SwingWorker worker;
private ByteArrayOutputStream byteArray;
private boolean done;
/** Creates new form prueba */
public Form1() {
initComponents();
this.byteArray = new ByteArrayOutputStream();
progressBar.setStringPainted(true);
//this.totalFiles = totalFiles;
currentProgress = 0;
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
private void initComponents() {
label1 = new javax.swing.JLabel();
progressBar = new javax.swing.JProgressBar();
statusLabel = new javax.swing.JLabel();
setBackground(new java.awt.Color(255, 255, 255));
setMaximumSize(new java.awt.Dimension(300, 150));
setMinimumSize(new java.awt.Dimension(300, 150));
setPreferredSize(new java.awt.Dimension(300, 150));
label1.setFont(new java.awt.Font("Arial", 1, 18));
label1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
label1.setText("Barra de progreso");
statusLabel.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
statusLabel.setText("Cargando");
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(this);
this.setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(org.jdesktop.layout.GroupLayout.LEADING, statusLabel, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, progressBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, label1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(label1)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(progressBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(statusLabel)
.addContainerGap(73, Short.MAX_VALUE))
}// </editor-fold>
// Declaraci�n de variables - no modificar
private javax.swing.JLabel label1;
private javax.swing.JProgressBar progressBar;
private javax.swing.JLabel statusLabel;
// Fin de declaraci�n de variables
public byte[] getDownloadedFile(String documentToSign){
//Variables locales
byte puente[] = null;
try{
//Leemos el documento a firmar
StringTokenizer st = new StringTokenizer(documentToSign, ";");
Vector<URL> fileURL = new Vector<URL>();
HttpSender sender = new HttpSender(null);
//Introducimos la lista de URLs de archivos a bajar en el objeto Vector
for(; st.hasMoreTokens(); fileURL.add(new URL(st.nextToken())));
//Para cada URL descargaremos un archivo
for(int i = 0; i < fileURL.size(); i++) {
file = sender.getMethod((URL)fileURL.get(i));
if(file == null) {
Thread.sleep(1000L);
throw new RuntimeException("Error descarregant el document a signar.");
System.out.println("Form1 Dentro de getDownloadFile, Antes de startDownload()");
//Fijamos el valor del n�mero de ciclos que se har�n seg�n el tama�o del fichero
this.totalCicles = sender.returnCurrentContentLength() / 1024;
this.progressBar.setMaximum(totalCicles);
//Modificamos el texto del JLabel seg�n el n�mero de fichero que estemos descargando
this.statusLabel.setText((new StringBuilder("Descarregant document ")).append(i + 1).append(" de ").append(fileURL.size()).toString());
statusLabel.setAlignmentX(0.5F);
*//Iniciamos la descarga del fichero, este m�todo llama internamente a un Thread*
*this.startDownload();*
*System.out.println("Form1 Dentro de getDownloadFile, Despu�s de startDownload()");*
*//if (pane.showProgressDialog() == -1) {*
*while (!this.isDone()){*
*System.out.println("No est� acabada la descarga");*
*if (this.isDone()){*
*System.out.println("Thread ACABADO --> Enviamos a puente el archivo");*
*puente = this.byteArray.toByteArray();*
*System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);*
*else{*
*Thread.sleep(5000L);*
*// throw new RuntimeException("Proc�s de desc�rrega del document a signar cancel�lat.");*
catch (HeadlessException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("UI: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (MalformedURLException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (HttpSenderException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (InterruptedException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
//System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);
return puente;
public void updateStatus(final int i){
Runnable doSetProgressBarValue = new Runnable() {
public void run() {
progressBar.setValue(i);
SwingUtilities.invokeLater(doSetProgressBarValue);
public void startDownload() {
System.out.println("Form1 Inicio startDownload()");
System.out.println("Form1 Dentro de startDownload, antes de definir la subclase SwingWorker");
System.out.println(done);
worker = new SwingWorker() {
public Object construct() {
System.out.println("Form1 Dentro de startDownload, dentro de construct(), Antes de entrar en doWork()");
return doWork();
public void finished() {
System.out.println("Form1 Dentro de startDownload, dentro de finished(), Antes de asignar done = true");
System.out.println(done);
done = true;
System.out.println("Form1 Dentro de startDownload, dentro de finished(), Despu�s de asignar done = true");
System.out.println(done);
statusLabel.setText("Completado, tama�o del archivo: " + (byteArray.size() / 1024) + "KB");
System.out.println("Form1 Dentro de startDownload, antes de worker.start()");
worker.start();
System.out.println("Form1 Dentro de startDownload, antes de salir de startDownload");
System.out.println(done);
System.out.println("Form1 Dentro de startDownload, despu�s de worker.start()");
* M�todo doWork()
* Este m�todo descarga por partes el archivo que es necesario descargar, adem�s de actualizar
* la barra de carga del proceso de carga de la GUI.
public Object doWork() {
System.out.println("Form1 doWork() this.byteArray.size(): " + this.byteArray.size());
try {
byte buffer[] = new byte[1024];
for(int c = 0; (c = this.file.read(buffer)) > 0;) {
this.currentProgress++;
updateStatus(this.currentProgress);
this.byteArray.write(buffer, 0, c);
this.byteArray.flush();
this.file.close();
this.currentProgress = totalCicles;
updateStatus(this.currentProgress);
} catch(IOException e) {
e.printStackTrace();
System.out.println("Form1 doWork() FINAL this.byteArray.size(): " + this.byteArray.size());
//done = true;
System.out.println("AHORA DONE = TRUE");
return "Done";
public boolean isDone() {
return this.done;
FormularioApplet class (main)
package es.cambrabcn.signer.gui;
import java.awt.Color;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.net.URL;
import java.security.Security;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
import netscape.javascript.JSObject;
import org.bouncycastle.jce.provider.BouncyCastleProvider;
import sun.security.provider.Sun;
import be.cardon.cryptoapi.provider.CryptoAPIProvider;
public class FormularioApplet extends java.applet.Applet {
//Variables globales
int paso = 0;
private static final String JS_ONLOAD = "onLoad";
private static final String JS_ONLOADERROR = "onLoadError";
private static final int SIGNATURE_PDF = 1;
private static final int SIGNATURE_XML = 2;
//private String signButtonValue;
private int signatureType;
private String documentToSign;
private String pdfSignatureField;
private Vector<String> outputFilename;
private Color appletBackground = new Color(255, 255, 255);
private Vector<byte[]> ftbsigned;
* Initializes the applet FormularioApplet
public void init(){
try {
SwingUtilities.invokeLater(new Runnable() {
//SwingUtilities.invokeAndWait(new Runnable() {
//java.awt.EventQueue.invokeAndWait(new Runnable() {
public void run() {
try{
readParameters();
initComponents();
catch(FileNotFoundException e){
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch(IOException e) {
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (Exception e) {
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
javascript(JS_ONLOAD, null);
/** This method is called from within the init() method to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
private void initComponents() {
this.setSize(350, 450);
appletPanel = new javax.swing.JPanel();
jPanel1 = new javax.swing.JPanel();
jTextField1 = new javax.swing.JLabel();
jPanel2 = new javax.swing.JPanel();
label = new javax.swing.JLabel();
jPanel3 = new javax.swing.JPanel();
jButton1 = new javax.swing.JButton();
jButton2 = new javax.swing.JButton();
setLayout(new java.awt.BorderLayout());
appletPanel.setBackground(new java.awt.Color(255, 255, 255));
appletPanel.setMaximumSize(new java.awt.Dimension(350, 430));
appletPanel.setMinimumSize(new java.awt.Dimension(350, 430));
appletPanel.setPreferredSize(new java.awt.Dimension(350, 430));
jPanel1.setBackground(new java.awt.Color(255, 255, 255));
jPanel1.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
jTextField1.setFont(new java.awt.Font("Arial", 1, 18));
jTextField1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
jTextField1.setText("SIGNATURA ELECTRONICA");
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
.addContainerGap())
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 24, Short.MAX_VALUE)
.addContainerGap())
jPanel2.setBackground(new java.awt.Color(255, 255, 255));
jPanel2.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
label.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
label.setIcon(new javax.swing.ImageIcon("C:\\java\\workspaces\\cambrabcn\\firmasElectronicas\\logo.gif"));
org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(label, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
.addContainerGap())
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(label)
.addContainerGap(229, Short.MAX_VALUE))
jPanel3.setBackground(new java.awt.Color(255, 255, 255));
jPanel3.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
//this.jButton1.setVisible(false);
//this.jButton2.setVisible(false);
jButton1.setText("Seg\u00fcent");
jButton1.setAlignmentX(0.5F);
//Cargamos el primer formulario en el JPanel2
loadFirstForm();
//Modificamos el texto del bot�n y el contador de pasos.
//this.jButton1.setText("Siguiente");
//this.jButton1.setVisible(true);
//this.jButton2.setVisible(true);
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
jButton2.setText("Cancel\u00b7lar");
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton2ActionPerformed(evt);
org.jdesktop.layout.GroupLayout jPanel3Layout = new org.jdesktop.layout.GroupLayout(jPanel3);
jPanel3.setLayout(jPanel3Layout);
jPanel3Layout.setHorizontalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
.addContainerGap()
.add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 94, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 112, Short.MAX_VALUE)
.add(jButton2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 102, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
jPanel3Layout.setVerticalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jButton2)
.add(jButton1))
.addContainerGap())
org.jdesktop.layout.GroupLayout appletPanelLayout = new org.jdesktop.layout.GroupLayout(appletPanel);
appletPanel.setLayout(appletPanelLayout);
appletPanelLayout.setHorizontalGroup(
appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
.addContainerGap()
.add(appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel3, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
.addContainerGap())
appletPanelLayout.setVerticalGroup(
appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
.addContainerGap()
.add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
add(appletPanel, java.awt.BorderLayout.CENTER);
}// </editor-fold>
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt) {
this.destroy();
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
changeForms(this.paso);
// Declaraci�n de variables - no modificar
private javax.swing.JPanel appletPanel;
private javax.swing.JButton jButton1;
private javax.swing.JButton jButton2;
private javax.swing.JPanel jPanel1;
private javax.swing.JPanel jPanel2;
private javax.swing.JPanel jPanel3;
private javax.swing.JLabel jTextField1;
private javax.swing.JLabel label;
// Fin de declaraci�n de variables
* M�todo readParameters
* M�todo que inicializa los valores de los par�metros internos, recibidos por par�metro.
private void readParameters() throws FileNotFoundException, IOException {
???????????????? deleted for the forum
addSecurityProviders();
* M�tode loadFirstForm
* Aquest m�tode carrega a jPanel2 el formulari que informa sobre la c�rrega dels arxius
private void loadFirstForm(){
//Form1 f1 = new Form1(stream, i + 1, fileURL.size(), sender.returnCurrentContentLength(), appletBackground);
//Form1 f1 = new Form1(fileURL.size(), sender.returnCurrentContentLength());
Form1 f1 = new Form1();
//Lo dimensionamos y posicionamos
f1.setSize(310, 150);
f1.setLocation(10, 110);
//A�adimos el formulario al JPanel que lo contendr�
this.jPanel2.add(f1);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Descarreguem l'arxiu a signar
*System.out.println("FormularioApplet Dentro de loadFirstForm(), antes de llamar a getDownloadFile()");*
*byte obj[] = f1.getDownloadedFile(this.documentToSign);*
if (obj == null){
System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) es NULL");
else{
System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) NO es NULL");
System.out.println("obj: " + obj.length);
this.ftbsigned.add(obj);
System.out.println("FormularioApplet Dentro de loadFirstForm(), despu�s de llamar a getDownloadFile()");
//Indicamos que el primer paso ya se ha efectuado
this.paso++;
* M�tode changeForms
* Aquest m�tode carrega a jPanel2 un formulari concret segons el valor de la variable global "paso"
private void changeForms(int paso){
/*A cada paso se cargar� en el JPanel y formulario diferente
* Paso previo: Se realiza en la inicializaci�n, carga el formulario, descarga el archivo y muestra la barra de carga.
* Case 1: Se carga el formulario de selecci�n de tipo de firma.
* Case 2: Se carga el formulario de datos de la persona que firma.
this.paso = paso;
switch(paso){
case 1:
//Creamos un objeto de formulario (seleccion de tipo de firma)
Form2 f2 = new Form2();
//Lo dimensionamos y posicionamos
f2.setSize(310, 185);
f2.setLocation(10, 110);
//Quitamos el formulario 1 y a�adimos el formulario 2 al JPanel
this.jPanel2.remove(1);
this.jPanel2.add(f2);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Modificamos el contador de pasos.
this.paso++;
break;
case 2:
//Creamos un objeto de formulario (seleccion de tipo de firma)
Form3 f3 = new Form3();
//Lo dimensionamos y posicionamos
f3.setSize(310, 175);
f3.setLocation(15, 130);
//Quitamos el formulario 1 y a�adimos el formulario 3 al JPanel
this.jPanel2.remove(1);
this.jPanel2.add(f3);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Modificamos el texto del bot�n y el contador de pasos.
this.jButton1.setText("Finalizar");
this.paso++;
break;
default:
//Finalizar el Applet
//C�digo que se encargue de guardar el archivo en el disco duro del usuario
break;
private void addSecurityProviders() throws FileNotFoundException, IOException {
Security.addProvider(new CryptoAPIProvider());
if (signatureType == SIGNATURE_PDF) {
Security.addProvider(new BouncyCastleProvider());
else {
Security.addProvider(new Sun());
private File createOutputFile(String filename, int index) {
return new File((String)outputFilename.get(index));
protected Object javascript(String function, String args[]) throws RuntimeException {
//Remove
if (true) return null;
try {
Vector<String> list = new Vector<String>();
if(args != null) {
for(int i = 0; i < args.length; i++) {
list.addElement(args);
if(list.size() > 0) {
Object objs[] = new Object[list.size()];
list.copyInto(objs);
return JSObject.getWindow(this).call(function, objs);
} catch(UnsatisfiedLinkError e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
} catch(Throwable e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
return JSObject.getWindow(this).call(function, new Object[0]);
Edited by: Kefalegereta on Oct 31, 2007 3:54 AM
Edited by: Kefalegereta on Oct 31, 2007 4:00 AMLook at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?
Whinston,
I live in Azerbaijan. Recently I bought apple tv in New York. When I come back to my country tried to rent movies from my country but couldn't find my country name on apple tv menu, so there is a problem I don't know how to fix it. is there have another way to take a rent movies? -
Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
JerryThanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry -
I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much?
iOS: Importing personal photos and videos from iOS devices to your computer
Maybe you are looking for
-
Mapping to simplify structure of XML for File Adapter
Hi everybody Here is a short question regarding the restructuring of an incoming IDoc message to an outgoing file. The IDoc has the structure: -IDoc ___-->Segment A1 ______--> Segment B1 _________-->Segment C1 _________-->Segment C2 _
-
When I sign in on my windows pc I get the response server error. What do I do?
When I sign in on my windows pc to I cloud I get the response -- server error. What do I do?
-
There Should Be Software Rollback Option!!!
Is it just me or is there anyone else thinks that there should be a software or firmware rollback option, after all it is our mobile phone. All i am trying to say is Nokia is kind enough for them to give us firmware upgrades why not also a rollback,
-
Will Anchors refresh a cgi page automatically?
Hello all: I have a cgi form that is not passing data consistantly. I have an anchor link on the page to basically, "GO TO BOTTOM OF FORM". Could that link be causing the form to refresh thus losing all the cgi data the user has already put in? Can I
-
Syslogd filling up var adm messages
I am having a problems with the system log daemon constantly filling up my messages file. Whenever something gets logged, it will repeat itself many times until the file is very large. The syslogd daemon also starts using 20-30%+ CPU. For instance Ap