Help reqd to display the form output  without print preview

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one t-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Sankar,
Simply put a parameter statement .
for example.
parameters : vbeln type vbrk-vbeln .
when u ll execute.U ll get the selection screen asking u for the perticular parameter,U input that and execute.U ll get the output as print preview.In the above  query i ll input vbeln and ll get the o/p.Similarly u enter Ur getpass no and u ll get the printpreiview as o/p.
Reward if useful.
Regards
Rudra

Similar Messages

  • Help reqd to display the FORM without Print method.

    Hi all,
    I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as  a display by giving one Z-code.
    i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
    For example.ZGPOUT if i enter as a t-code.
    it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
    Pls post ur comment and reply me with examples,if possible.
    thanks & regards
    sankar.

    Hi Sankar,
    Its bit ambigious......but logic is very simple...........
    1. Create a Z.....report
    2. Inside this create your selection parameters
    3. Do your logic for the selection screen(use list box option or F4 help) to ask for the gate pass number.
    4. Call the required form. (For print preveiw assign 'X' to tdpreview of ITCPO)
    5. Finally assign your print program to the tcode which will finally do rest of the coding.
    Thanks,
    Mark

  • Help reqd to display the form without print preview call

    Hi all,
    I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
    i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
    For example.ZGPOUT if i enter as a t-code.
    it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
    Pls post ur comment and reply me with examples of code,if possible.
    thanks & regards
    sankar.

    the following code are suitable for SMARTFORMS print,please refer to the BOLD section:
    call function 'SSF_FUNCTION_MODULE_NAME'
        exporting
          formname                 = v_form_name
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
        importing
          fm_name                  = v_fm_name
       exceptions
         no_form                  = 1
         no_function_module       = 2
         others                   = 3.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
               with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    *Call Smart form
      <b>data: t_control like ssfctrlop.</b>
      if not p_fax is initial.
        t_control-device = 'TELEFAX'.
      endif.
    <b>  t_control-PREVIEW = ' '.    "space means no print preview.</b>
      call function v_fm_name
      exporting
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
        <b>control_parameters          = t_control</b>
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
        tables
          l_xcredit                = icredit
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.

  • How to display the Form output in multiple languages ? ------ Urgent

    How to display the Form output in multiple languages ? -
    Urgent

    Hi,
    Do u mean the Form output in 2-3 languages ...like form output will be having english russian etc...
    for the above case , what u have to do ...
    first have to get the transalations for all the fields
    say for example : if the english word is PO Number , then u have to get the transalation text for PO Number :
    after this , what u have to is ,,, Log on to SAP with russian language ,  then in the form o/p u have to paste that russian test ( translation text ) ...
    do like this for all the components in the form .
    Reward Points if it is Useful.
    Thanks,
    Manjunath MS

  • Display the form Without explorer

    I am using forms builder 10g .
    I want to display the form Without explorer.
    Is it possible ???
    thanks.

    Start your application using Java Web Start.
    [Java Web Start|http://www.bloggingaboutjava.org/2007/04/running-oracle-webforms-like-a-client-server-application/]
    It's not supported by Oracle, but it works well and looks good.

  • Jinitiator can't display the forms

    Hi GUYS!
    I HAVE SOME PROBLEM TO DISCUSS WITH YOU AND MAYBE YOU CAN HELP ME WITH IT.
    I HAVE:
    OS: WINDOWS 7 ULTIMATE 64-BIT
    ORACLE DB: ORACLE DATABASE 11GR2
    ORACLE DS: ORACLE DEVELOPER SUITE 10G
    JINITIATOR: JINITIATOR 1.3.1.22
    BROWSER: GOOGLE CHROME AND MOZILLA FIREFOX
    PROBLEM/S: - CAN'T DISPLAY THE FORMS ON CHROME AND FIREFOX
    - THERE'S NO PLUGIN (ACCORDING TO CHROME/FF) FOR THE JINITIATOR
    WHAT SHOULD I DO TO MAKE IT WORK?

    Yes I followed all what you said...
    But still i can't run the forms.
    check this.. (sorry it's very long)
    # $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
    # formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
    # This section defines the Default settings. Any of them may be overridden in the
    # following Named Configuration sections. If they are not overridden, then the
    # values here will be used.
    # The default settings comprise two types of parameters: System parameters,
    # which cannot be overridden in the URL, and User Parameters, which can.
    # Parameters which are not marked as System parameters are User parameters.
    # SYSTEM PARAMETERS
    # These have fixed names and give information required by the Forms
    # Servlet in order to function. They cannot be specified in the URL query
    # string. But they can be overridden in a named configuration (see below).
    # Some parameters specify file names: if the full path is not given,
    # they are assumed to be in the same directory as this file. If a path
    # is given, then it should be a physical path, not a URL.
    # USER PARAMETERS
    # These match variables (e.g. %form%) in the baseHTML file. Their values
    # may be overridden by specifying them in the URL query string
    # (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
    # or by overriding them in a specific, named configuration (see below)
    [default]
    # System parameter: default base HTML file
    baseHTML=base.htm
    # System parameter: base HTML file for use with JInitiator client
    baseHTMLjinitiator=basejpi.htm
    # System parameter: base HTML file for use with Sun's Java Plug-In
    baseHTMLjpi=basejpi.htm
    # System parameter: delimiter for parameters in the base HTML files
    HTMLdelimiter=%
    # System parameter: working directory for Forms runtime processes
    # WorkingDirectory defaults to <oracle_home>/forms if unset.
    workingDirectory=
    # System parameter: file setting environment variables for the Forms runtime processes
    envFile=default.env
    # Forms runtime argument: whether to escape certain special characters
    # in values extracted from the URL for other runtime arguments
    escapeparams=true
    # Forms runtime argument: which form module to run
    form=test.fmx
    # Forms runtime argument: database connection details
    userid=
    # Forms runtime argument: whether to run in debug mode
    debug=no
    # Forms runtime argument: host for debugging
    host=
    # Forms runtime argument: port for debugging
    port=
    # Other Forms runtime arguments: grouped together as one parameter.
    # These settings support running and debugging a form from the Builder:
    otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
    # Sub argument for otherparams
    buffer=no
    # Sub argument for otherparams
    debug_messages=no
    # Sub argument for otherparams
    array=no
    # Sub argument for otherparams
    obr=no
    # Sub argument for otherparams
    query_only=no
    # Sub argument for otherparams
    quiet=yes
    # Sub argument for otherparams
    render=no
    # Sub argument for otherparams
    record=
    # Sub argument for otherparams
    tracegroup=
    # Sub argument for otherparams
    log=
    # Sub argument for otherparams
    term=
    # HTML page title
    pageTitle=Oracle Application Server Forms Services
    # HTML attributes for the BODY tag
    HTMLbodyAttrs=
    # HTML to add before the form
    HTMLbeforeForm=
    # HTML to add after the form
    HTMLafterForm=
    # Forms applet parameter: URL path to Forms ListenerServlet
    serverURL=/forms/lservlet
    # Forms applet parameter
    codebase=/forms/java
    # Forms applet parameter
    imageBase=DocumentBase
    # Forms applet parameter
    width=1024
    # Forms applet parameter
    height=768
    # Forms applet parameter
    separateFrame=false
    # Forms applet parameter
    splashScreen=
    # Forms applet parameter
    background=
    # Forms applet parameter
    lookAndFeel=Oracle
    # Forms applet parameter
    colorScheme=teal
    # Forms applet parameter
    logo=
    # Forms applet parameter
    restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
    # Forms applet parameter
    formsMessageListener=
    # Forms applet parameter
    recordFileName=
    # Forms applet parameter
    serverApp=default
    # Forms applet archive setting for JInitiator
    archive_jini=frmall_jinit.jar
    # Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
    archive=frmall.jar
    # Number of times client should retry if a network failure occurs. You should
    # only change this after reading the documentation.
    networkRetries=0
    # Page displayed to Netscape users to allow them to download Oracle JInitiator.
    # Oracle JInitiator is used with Windows clients.
    # If you create your own page, you should set this parameter to point to it.
    jinit_download_page=/forms/jinitiator/us/jinit_download.htm
    # Parameter related to the version of JInitiator
    jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
    # Parameter related to the version of JInitiator
    jinit_exename=jinit.exe#Version=1,3,1,22
    # Parameter related to the version of JInitiator
    jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://www.oracle.com/technetwork/java/javase/downloads/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0016-0000-0045-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,43
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_43
    # EM config parameter
    # Set this to "1" to enable Enterprise Manager to track Forms processes
    em_mode=0
    # Single Sign-On OID configuration parameter
    oid_formsid=%OID_FORMSID%
    # Single Sign-On OID configuration parameter
    oracle_home=C:\JASEL_ORA\Dev_Suite
    # Single Sign-On OID configuration parameter
    formsid_group_dn=%GROUP_DN%
    # Single Sign-On OID configuration parameter: indicates whether we allow
    # dynamic resource creation if the resource is not yet created in the OID.
    ssoDynamicResourceCreate=true
    # Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
    ssoErrorUrl=
    # Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
    ssoCancelUrl=
    # Single Sign-On parameter: indicates whether the url is protected in which
    # case mod_osso will be given control for authentication or continue in
    # the FormsServlet if not. It is false by default. Set it to true in an
    # application-specific section to enable Single Sign-On for that application.
    ssoMode=false
    # The parameter allow_debug determines whether debugging is permitted.
    # Administrators should set allow_debug to "true" if servlet
    # debugging is required, or to provide access to the Forms Trace Xlate utility.
    # Otherwise these activities will not be allowed (for security reasons).
    allow_debug=false
    # Parameter which determines whether new Forms sessions are allowed.
    # This is also read by the Forms EM Overview page to show the
    # current Forms status.
    allowNewConnections=true
    # EndUserMonitoring
    # EndUserMonitoringEnabled parameter
    # Indicates whether EUM/Chronos integration is enabled
    EndUserMonitoringEnabled=
    # EndUserMonitoringURL
    # indicates where to record EUM/Chronos data
    EndUserMonitoringURL=
    # Example Named Configuration Section
    # Example 1: configuration to run forms in a separate browser window with
    # "generic" look and feel (include "config=sepwin" in the URL)
    # You may define your own specific, named configurations (sets of parameters)
    # by adding special sections as illustrated in the following examples.
    # Note that you need only specify the parameters you want to change. The
    # default values (defined above) will be used for all other parameters.
    # Use of a specific configuration can be requested by including the text
    # "config=<your_config_name>" in the query string of the URL used to run
    # a form. For example, to use the sepwin configuration, your could issue
    # a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
    [sepwin]
    separateFrame=True
    lookandfeel=Generic
    # Example Named Configuration Section
    # Example 2: configuration forcing use of the Java Plugin in all cases (even if
    # the client browser is on Windows)
    [jpi]
    baseHTMLJInitiator=basejpi.htm
    # Example Named Configuration Section
    # Example 3: configuration running the Forms ListenerServlet in debug mode
    # (debug messages will be written to the servlet engine's log file).
    [debug]
    serverURL=/forms/lservlet/debug
    # Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
    # DS but not AS and is also available for download from OTN.
    [webutil]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=oracle
    Edited by: Jiel on May 21, 2013 7:42 AM

  • Displaying the report output in excel format

    Please help me in getting the report output in excel format.
    thnks

    I ran into a BIG problem after passing from 6i rep server to 9i rep server.
    On 6i rep server I used to set DESFORMAT='DELIMITED', and that produced reasonable tab-delimited output for reports that did not have group above (all the query groups were from left to right, not a single group having fields displayed above some other group). When deployed on rep server 9i, the same reports produced some unexplainable output: some of the rows were duplicated, but I couldn't figure out any rule.
    So, the best thing to get the reports into something that fits in .xls would be to have the output in .xml, that may be imported in Excel.

  • Hi, after submission of the form, can the respondents make changes to their answers and submit the form again without completing every single question?

    Hi there,
    After submission of the form, can the respondents make changes to their answers and submit the form again without completing every single question?
    Thanks for your help
    Paline

    Hi Paline,
    Unfortunately this cannot be done.However, being the author of the form you can make the required changes in the response file.
    Thanks,
    Vikrantt Singh

  • Proble with the form  output

    Hi
    Im using oracle forms.when i run a basic form which contains a button im getting the form output but with the menu bar just above the output window with the menu items like Action,Edit,Query,block,record etc....But i dont want it to be displayed in the output. Is it possible to do like that.
    Thanks in advance.

    Thanks its working........
    and i ve another doubt regarding this...
    i can see some error messages at the bottom of the window like frm :1020
    its something like status bar of the form..
    i don't want it to be displayed...
    i want a clear out put of a form just like a web page..that's it..
    thanks in advance

  • Adobe Form Print Problem - Header is cut off without print preview

    We are currently experiencing a problem when trying to print Adobe forms.  We have created several forms and are experiencing the same issue with all forms.  The issue occurs when we are trying to print a form.  If we choose a print preview prior to printing, the form looks normal and prints fine.  However, if we do a direct print (i.e. no print preview), then the top part of the form is cut off.  It's almost like all of that data on the form gets shifted upward, cutting off about 1/2" to an 1" from the top of the form.  We have tried printing to different printers and are ending up with the same results each time.  We do not experience this issue with SAPScript.
    I have searched several threads and haven't been able to find an issue quite like the one we are experiencing.
    Has anyone ever exeperienced a problem like this before? 
    Currently using Adobe LiveCycle Designer 8.1.2 and are on Netweaver 7.00 EhP1.
    Thank you for any help.

    I am going to go ahead and close this thread as I believe we have found a solution.  Sai is correct that there is an issue with the design.
    If anyone else runs into this problem, take a look at note 968394 that talks about differences between print preview and printing from spool.  When you are in the print preview dialog box, under "Page Scaling," the default is "Shrink to printable area."  So if your form went outside the margins, it would shrink to fit giving you the impression that the problem is not with the print preview rather than the form itself. 
    After moving the header stuff down a bit everything is printing normal both through the spool and via print preview.
    Thank you!

  • Please help me out with the function code of print option in module pool

    please help me out with the function code of print option in module pool, along with CASE condition.
    regards,
    asif

    Hi
    you can use the Function module
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        destination            = 'LP01'                       "'Printer name
        list_name              = 'TEST'
        list_text              = 'SUBMIT ... TO SAP-SPOOL'
        immediately            = ' '
        line_size              = '2000'
        no_dialog              = 'X'             "pass space to Pop screen for Print option
      IMPORTING
        out_parameters         = wa_pri_params
        valid                  = w_valid.
    "next call below things
      NEW-PAGE PRINT ON NO DIALOG PARAMETERS wa_pri_params.
         "and try to Print the values inside the new-page
      NEW-PAGE PRINT OFF.
    Prabhudas

  • I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

    I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

    Hi Crushed,
    Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
    Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
    Regards,
    Ian.

  • Query on display the Alv output,...................its urgent pls help

    hi friends,
        Here is my query on a Alv Report output display
      I have two internal tables i_vbak and i_vbap
    i_vbak contains the fields and value as
    vbeln     kunnr    auart  audat                   bstnk   vkorg
    1000066         1000071  ze0r   20070918       Itest1     PA11
    1000067         1000072  ze0r   20070919       SLA-Test1  PA11
    i_vbap contains the field and value as
    VBELN             MATNR             ARKTX
    1000066    SAMPLE MATERIAL1   Sample Material for reports
    1000066    SAMPLE MATERIAL    Sample Material for reports
    1000066    TEST   MATERIAL       Test Material for reports
    1000067    SAMPLE MATERIAL    Sample Material for reports
    1000067    TEST MATERIAL         Test Material for reports
    1000067    SAMPLE MATERIAL1   Sample Material for reports
    I have a another internal table called inv_final which contain all these fields and respective values to display in the alv output.Here i am giving only two field how it whould come in alv output.
    Sold to Patry(kunnr)  Sales Doc No(vbap-vbeln)    Material Name(matnr)
    1000071                  1000066                  Sample Material1
    1000071                  1000066                  Sample Material
    1000071                  1000066                  Test Material
    1000072                  1000067                  Sample Material 
    1000072                  1000067                  Test Material
    1000072                  1000067                  Sample Material1
    If anybody have done similay kind of repore than help me with the code,or else if anybody having any idea to solve this out than help me.I have only prob with the logic bofore the final table display in the alv output.
    Helpful answer will be rewardad generously.
    Thanks a lot
    mrutyun^

    Hi
    Put all the fields in to an internal table and disply only your required fields.
    Kuntal

  • How to display the ALV output in a Group format

    Hello Experts,
    I have my current ALV report output like this:
    GROUP DESCRIPTION
    group1 adsfadsfadsfa
    group1 lkjadsfjlajdsfla
    group1 adsfadsfadsf
    group1 adsfadsfadfa
    group2 adsfadsfafaa
    group2 oiueworuowe
    group2 zxvzcxvzvcsd
    group2 oiuqoewruqw
    And I need to display the output of my ALV report in a group format like this:
    GROUP DESCRIPTION
    group1 adsfadsfadsfa
           lkjadsfjlajdsfla
           adsfadsfadsf
           adsfadsfadfa
    group2 adsfadsfafaa
           oiueworuowe
           zxvzcxvzvcsd
           oiuqoewruqw
    Can anybody please let me know if there is any sample program/thread/help etc.
    I grealty appreciate your help.
    Thanks.

    Hi Rainer,
    Thanks for the reply. I am using container for the ALV Display.
    So I wrote my code lie this:
    sort t_data by zgroup zdesc  ( t_data is my output internal table) .
    I have my ALV layout delcared like this:
    data: alv_layout type lvc_s_layo.
    So I have modified my code like this:
    alv_layout-NO_MERGING  = 'X'.
    But it did'nt work. Please let me know if I need make any other changes.
    Thanks again.

  • How to display the form of time statement, which was created in trans. PE50

    Hi to all!
    I have created the salary statement with the PE50 and I want the form to be displayed in the ESS.
    How to display this form?
    Thank.

    Dear Siddharth,
    I am getting this error for Time Statement here also we have used PE50 to create time statement for r/3 purpose, Which would be feasible one to work with for getting the display of Time Statement.
    Form TH_TIME_ST does not exist
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form TH_TIME_ST does not exist
         at java.lang.Throwable.<init>(Throwable.java:194)
         at java.lang.Error.<init>(Error.java:49)
         at com.sap.pcuigp.xssfpm.java.FPMRuntimeException.<init>(FPMRuntimeException.java:34)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:357)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
         at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
         at com.sap.xss.hr.tim.per.selection.VcTimPerSelection.onInit(VcTimPerSelection.java:238)
         at com.sap.xss.hr.tim.per.selection.wdp.InternalVcTimPerSelection.onInit(InternalVcTimPerSelection.java:246)
         at com.sap.xss.hr.tim.per.selection.VcTimPerSelectionInterface.onInit(VcTimPerSelectionInterface.java:162)
         at com.sap.xss.hr.tim.per.selection.wdp.InternalVcTimPerSelectionInterface.onInit(InternalVcTimPerSelectionInterface.java:144)
         at com.sap.xss.hr.tim.per.selection.wdp.InternalVcTimPerSelectionInterface$External.onInit(InternalVcTimPerSelectionInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:467)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:359)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:755)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:278)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:722)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:623)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:215)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:113)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:70)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:818)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1265)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:750)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:715)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:113)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:107)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:278)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:623)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:215)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:113)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:60)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:332)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:0)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:335)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:963)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:249)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:0)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:92)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:30)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:35)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:101)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Appreciate your help on this.
    Regs,
    Raj

Maybe you are looking for

  • No 'privacy' button in Safari on iPad

    When using an iPad Air, Safari does not present a "private" button. I have access to another iPad of the same variation and can see where the "private" button is supposed to appear, but it isn't there. I have checked under settings and can see nothin

  • ActiveDirectory module, how to authenticate to an outside AD environment?

    I have an interesting problem and I'm not sure how to work around it. My AD environment is Windows 2008 R2. My workstation in Windows 8.1 NOT joined to active directory. I need to run/develop some PS scripts that use the ActiveDirectory module, howev

  • Programmatically creating postscript files for office documents

    Hi All I am in the process of experimenting with vb.net to open up a word document in the background and create a postscript file, which i would then use to create a pdf. This currently is a windows service and seems to run ok when the same code runs

  • Cannot play a TV show on TV or ipod.

    Hi, I have purchased a HD TV Show episode from iTunes store canada. It plays on my itunes. But whenever I hook up my MacBook to my Sony LCD TV it says that the display is not authorized. In addition, I tried putting it on my iPod Video and play it fr

  • Record a narrated slideshow for YouTube?

    Can Keynote do this? I want to take some photos, record some narration, and turn it into an audio slideshow that I can upload to YouTube. The images would automatically be displayed in order as the narration plays. If Keynote can't do this, perhaps a