Help required for Computer idiot

I am unable to download any attachments from my email. It checks for viruses, says ok then nothing happens. Can anyone help ?
Thank you

It sounds like your Anti-Virus software is mal-behaving. Since AV software is not necessary on iMacs at this point in time (there has NEVER been a successful OSX based "Virus" in the history of Apple's OSX series) I would recommend removing your AV software and thus speeding up your computer and eliminating ongoing problems such as you are having.
Hope this helps

Similar Messages

Help required for unicode compatibilty

Dear All,
We are in a process of analyzing the impact of unicode compatibility for our environment.
Following is our scenario:
- ECC6.0 is non unicode systsem
- Need to buid unicode CRM 7, SCM 7, PI 7.1 and BI7
- Need to integrate the above systems to non unicode ECC system.
Our questions are :
1. Is there any performance consideration when using communication between an Unicode and non-Unicode system?
Is Unicode - Unicode faster than Unicode - non-Unicode communication performance wise?
2. Do we face any technical or functinal problems while trying to integrate
unicode BI/ NW Java Stack to non unicode systems.
3. Do we need to review our sizing estimations due to unicode implemenation?
5. what will be the storage consumption increase for unicode systems compared to non unicode?
It would be greatly helpful for me if you can clarify these doubts.
Thanks and Regards

Hi,
1. I think no one has really measured this. I expect a slightly higher requirement for Unicode <--> Non-Unicode interfaces.
2. Please have a look at SAP Notes 838402, 73606, 975768 and 1358929 for restrictions in Non-Unicode systems. SAP highly recommends to go for Unicode in the whole landscape.
3. and 5. If you use the SAP quicksizer (http://service.sap.com/quicksizing), then Unicode is integrated.
" Please note that the Quick Sizer results include Unicode requirements. For more
information on additional requirements caused by Unicode, see
http://service.sap.com/unicode -> Unicode Media Library -> Unicode information on
specific topics: SAP Business Suite Unicode Hardware Requirements"
Best regards,
Nils Buerckel
SAP AG

PCUI 4.0, Search Help Required for New field

Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
Asad

Hi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in <b>Entry Help/Check</b> of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad

Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).

Hi All,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
Regards

Hi Rickkk,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
/people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
2
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
Thanks,
Ram.

Help! Urgent help required for adjusting image

Hi - hoping someone can help.
I sent the attached PDF - http://www.sensecreative.co.uk/custUploads/SENSE-36-7977-95928/77317/SENSE-36-7977-95928-7 7317-2440.zip - to print with Sense Creative. The cards were printed and they've turned out quite visibly green on the reverse (where it should be white).
I've printed the artwork on several printers I have access to and it looks as it should, however SC are saying that the issue is with the artwork
"The green tinge you see on the reverse of these cards is prevalent in the artwork. The makeup of the background is approximately c-15 m-11 y-15 k-0. the predominant levels of the yellow and cyan will give you the green tint. Upping the levels of the artwork in or substituting the cyan, magenta and yellow levels with more black in Photoshop will likely give you the result you require. We are satisfied that in both instances, the artwork has printed correctly and the colours are well within tolerance given the nature of the artwork."
So, I'm in a bit of a pickle as the cards are needed for an event next week.
How do I change the image levels? Or are they talking nonsense and trying to pass the buck?
Help!

station_two,
Acrobat View> Tools> Print Production> Output Preview: Object Inspector will call out the objects' profiles if you click on each one individually (in this case all appeaar to be "Device CMYK" or Untagged CMYK)
untagged CMYK has the same pitfalls as untagged RGB... if one applys or assumes the wrong SOURCE PROFILE it doesn't CONVERT colors to Monitor RGB or Print Space correctly

Urgent help required for network configuration

sir
i have a mixed scenario right now.
I have only three computer on home network.
1.vista accer travelmate 4720 laptop loaded with vista sp1 ultimate
2.normal pc : Core2 duo with XFX ATI REDION graphics card and this pc is loaded with OEL 5.3.x linux but this pc has 2 NICs(eth 0,eth 1) I have connected both with a switch and the switch is connected to a modem for internet.can I use one NIC as private and another NIC as public to access internet?
3. normal pc : P4 HT and its loaded with win xp sp2 having eth 0
how to set my network.
I have connected each NIC with a D-Link switch.And the D-Link switch is connected with DataOne Nokia Siemens network c2110 modem.
But problems are that
1) each time i can connect only one PC at a time.
2)OEL 5.3.x is not connected to the specified modem ever....by [adsl seup|http://forums.oracle.com/forums/thread.jspa?threadID=832112&tstart=0] command.should i configure it during installation?is there any easy shell scriot avilable to do this stuff?
please help as soon as you can.......
regards
Edited by: mango_boy on Sep 7, 2009 4:44 AM

ifconfig output:
eth1      Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:1 errors:0 dropped:0 overruns:0 frame:0
          TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:243 (243.0 b) TX bytes:9406 (9.1 KiB)
          Interrupt:16 Base address:0xec00
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:3779 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3779 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6124500 (5.8 MiB) TX bytes:6124500 (5.8 MiB)
virbr0    Link encap:Ethernet HWaddr 00:00:00:00:00:00
          inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b) TX bytes:8360 (8.1 KiB)
xenbr0    Link encap:Ethernet HWaddr 00:00:00:00:00:00
          UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)adsl-setup output
[root@localhost ~]# adsl-setup
Welcome to the ADSL client setup. First, I will run some checks on
your system to make sure the PPPoE client is installed properly...
LOGIN NAME
Enter your Login Name (default root): kris_9929
INTERFACE
Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): eth1
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no):
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: server
PASSWORD
Please enter your Password:
Please re-enter your Password:
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): yes
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
          for ensuring the security of your machine. You are STRONGLY
          recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
                for a LAN
Choose a type of firewall (0-2): 1
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):no
** Summary of what you entered **
Ethernet Interface: eth1
User name:          xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Activate-on-demand: No
DNS addresses:      Supplied by ISP's server
Firewalling:        STANDALONE
User Control:       yes
Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
(But first backing it up to /etc/ppp/chap-secrets.bak)
(But first backing it up to /etc/ppp/pap-secrets.bak)
Congratulations, it should be all set up!
Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status.Edited by: mango_boy on Sep 7, 2009 9:02 AM
added adsl setup output
Edited by: mango_boy on Sep 7, 2009 9:15 AM

Urgent help required for update Plz help!!

Hi i am updating my E51 and its displaying updating software please wait estimated time left 15 minutes for the past 1 hour.
Please tell me what should i do....
Its really urgent pls help....

Hi,
There might be a problem with either the NSU or the phone itself. Any updates on what happened?
Next time make sure you meet the certain system requirements before proceeding with the update.
Message Edited by nj15 on 01-Oct-2008 01:44 PM

Urgent Help Required for Connect Four Game

Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
     int player1;
     int player2;
     public PlayGame()
          //this.player1 = player1;
          //this.player2 = player2;
     public void StartGame()
     try{
     // int X = 0, Y = 0;
     //int value;
     int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
     int[][] ConnectFourArray = new int[6][7];
     int num1, num2;
     for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
     //Player player1;
     //Player player2;
     public ClassConnectFour()
          //this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end class
I am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda
//

Hi,
Thanks for your help but I really don't understand the table lookup algorithm. Could you please send me some code to implement that.
I will send you the formatted code as well
Thanks for your help.
looking forward to your reply.
Koonda
Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
int player1;
int player2;
public PlayGame()
//this.player1 = player1;
//this.player2 = player2;
public void StartGame()
try{
// int X = 0, Y = 0;
//int value;
int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
int[][] ConnectFourArray = new int[6][7];
int num1, num2;
for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
//Player player1;
//Player player2;
public ClassConnectFour()
//this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end classI am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda

Help required for Payment Term change report in SAP BI

Dear Experts ,
I have got a client requirement to develop a report to present all the purchase orders for which there has been a change in Payment Term. Could any one provide his input as which extractor can give me this information or where can I get this data to capture changes in Payment Term in ECC.
Any suggestions welcome !
Regards
Anurag Krishna Dev

HI,
Purchase relavant information will be getting from
2LIS_02_ITM     - item level information
2LIS_02_HDR   - Header level information
2LIS_02_SCL   - schedule level information
find the below link hope it will help you get more idea...
http://help.sap.com/saphelp_sm32/helpdata/en/1d/f4383fdb800804e10000000a114084/frameset.htm
Regards
BVR

Help required for SSO

Hi,
I am looking for a single sign-on solution for Tomcat platform. This solution should work on Active Directory-Internet Explorer 6-Tomcat 5 combo.
The requirement is - When a user requests a certain page from his browser, the web server must be able to identify the (active directory domain name/domain user name) from his request.
I tried a product by appliedcrypto.com, which works on Kerberos/SPNEGO, but it doesn't seem to be working.
I am running on a very tight schedule, please help me out.
Thanx and Regards
Vibhor

Have you checked out the Oracle Single Sign On Application Developer's Guide that comes with the Portal Services documentation? Here's a link to it on OTN.
http://technet.oracle.com/docs/products/ias/doc_library/ias102/portal.102/a86782/toc.htm
You may find it helpful.

Help required for the users report requirement

Hello,
User requirement is to get the report as follows
Period            planned order     Production order      Backlog
Feb2008          15                           3                      18
March2008      4                            11                     15
Backlog is the formula for planned order & production order.
My problem is that, In the cube the data for planned order is the char value 'X' or a blank.
It has to count the total of planned order for the entire month of feb,& print the value counting the number of 'X',here as shown as 15.
Planned order, Production order are in rows & are chracteristics.
Is thr any solution to count master data which has a char value(X).
I have tried using the formula variable.I had created the new formula.Then using the data functions as count(Formula variable),using the replacment path.But it did not work
Help me out to find the total for the char value of the master data.
Help would be rewarded!

Hello,
For BACKEND:
1) Create a normal KF say counter and include it in the cube.
2) Now you can populate the value for this KF via end routine in transformation.
3) You need to check whether the value for planned order is X. If yes then update KF with value 1.
4) I hope you can take care of this routine part. Once this is done the data in the cube might look in below manner:
Month Planned-Order Counter
Feb 2007 | X | 1
Feb 2007 | X | 1
Feb 2007 | | 0
Feb 2007 | X | 1
Feb 2007 | | 0
Mar 2007 | | 0
Mar 2007 | X | 1
Mar 2007 | | 0
Mar 2007 | | 0
Mar 2007 | X | 1
Now in the report if you include month and counter the report will look like
Month Counter
Feb 2007 | 3
Mar 2007 | 2
If you see the counter is getting aggregated to give you the sum against the value of planned order as X against month.
I think this should work.
If this dosent work let me know i will let you the alternate solution for frontend. but for that too you need to make the above backend changes.
So do the backend changes and try to use counter KF for showing planned orders and i think it should work fine.
Regds,
Shashank

Input help required for parameter on the selection screen

hi all,
i have created two parameters on the selection screen.
1. deptno
2.empname
so my requirement is if i input any deptno then i should get all
the empname corresponding to that deptno in the parameter empname
ie for deptno 10 there should be f4 help for empname.
here i am pasting my code plz check where i am doing wrong--
*& Report ZTEST10
*& Developer
*& Date:   &DATE
REPORT ZTEST10.
tables: zemployee1.
parameters: p_deptno like zemployee1-deptno,
            p_empnam like zemployee1-empname.
Data: begin of itab occurs 0,
       deptno like zemployee1-deptno,
       empname like zemployee1-empname,
       empno like zemployee1-empno,
       end of itab.
At selection-screen on value-request for p_empnam.
select empname
        from zemployee1
        into corresponding fields of table itab
        where deptno = p_deptno.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
      DDIC_STRUCTURE         = ' '
        retfield               = 'empname'
      PVALKEY                = ' '
       DYNPPROG               = sy-repid
       DYNPNR                 = sy-dynnr
      DYNPROFIELD            = 'p_empnam'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
      VALUE_ORG              = 'C'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = ' '
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
      MARK_TAB               =
    IMPORTING
      USER_RESET             =
      tables
        value_tab              = itab
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
I will award ur efforts.
Thanks
sanjeev

Hi Sanjeev,
If you input any deptno and you should get all the empname corresponding then first you need to use CALL FUNCTION 'DYNP_VALUES_READ'.
EXPORTING
    DYNAME                         = sy-repid
    DYNUMB                         = sy-dynnr
TRANSLATE_TO_UPPER             = ' '
   REQUEST                        = 'A'
PERFORM_CONVERSION_EXITS       = ' '
PERFORM_INPUT_CONVERSION       = ' '
DETERMINE_LOOP_INDEX           = ' '
TABLES
    DYNPFIELDS                     = gt_dynp
declare: DATA : gt_dynp LIKE dynpread OCCURS 0.
loop at gt_dynp into wt_dynp where fieldname = 'P_SUPRID-LOW'.
lv_low = wt_dynp-fieldvalue.
endloop.
Then while selecting use this p_superid-low instead of p_deptno.
Then :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
After this funtion module:
write:
IF sy-subrc = 0.
    READ TABLE itab
INDEX 1.
    'p_empnam' = return_tab-fieldval.
Declare return_tab as:
    DATA: return_tab   LIKE ddshretval OCCURS 0 WITH HEADER LINE.
Thanks,
Shweta
ENDIF.

Help required for Excel Pivot.

Given below my data table with sample data.
I have a requirement to create a pivot template as shown below. Data should be displayed group by Year and Allowance name. For each year, I have to get the sum of points earned by each allowance and the balance points exists for that particular year.
How can I achieve this using Pivot in Excel? Please help me on this.

Hi,
In BOM, there is onr item category "R", variable size item is there. Using this you can achieve this. By exploring the Variable size item you can get some idea.
Regards,
V. Suresh

Help Required for Adobe Forms.....

Hello All,
I have a very unique requirement as such we have a form and in the "TO" string field where we specify the email address of the receivers, now we want to send address memo to multiple users, however in our search window we can search only one name at a time & need to open search window every time for every new user to be included in the address field. We need to have AJAX type of functionality such as AJAX does asynchronous calls to the back-end and get help values dynamically even when the user is entering help values.
In my case if I start typing S in the manager filed, an event should get triggered and return back the names of all managers who start with the letter S,
If we go to Google.com and start typing, as you type,e Google gets help values and displays them below the input field. This is based on making asynchronous calls to the back-end.
We want to send interactive adobe forms to the multiple users for their approval or information. while entering email ids of multiple users, we need to have functionality as described above.
I'll appreciate if anyone can help with some clear steps, document link or working code sample etc.
Regards,
Moderator message: sorry wrong forum, please have a look in the forum for "Adobe Interactive Forms".
Edited by: Thomas Zloch on May 25, 2011 10:49 AM

Dear Sunitha,
Thanks for your reply.
Can you please specify how to create a virtual table and Associated dataset in Adobe Forms.
Our scenario is to create a Sales Order in SAP via Adobe Forms through Offline.
Please find the below image.
Data for Company Code and Plant is available in 2 Internal Table.
Please assist in the following
How to combine these 2 Internal tables inside Adobe Forms.
Filter the values of Plant based on Company Code.

Help required for Page Customization test

Hello all,
Could anyone assist with a test on Page Customizations? I am interested in testing a specific Page Customization on Version 7 (any SP) or Version 9 (pre SP5).
Test case:
1. Create a Page Customization on MasterAgreement (or any other business document with Document Links) as follows:
2. Check effect in Master Agreement (requirement is to check if Add/Delete buttons have been disabled by the PageCust)
I think that this type of Page Customization was working in either 7 or 9 but we don't have any instance to check.
Any help would be highly appreciated.
Regards,
Bogdan

Hello Bogdan,
I tried to reproduce it in a 7.0 system and I still see the Add button enabled on the Doc Links collection. I believe this was the behavior all along. My understanding is that this is on product management backlog for consideration for a future release.
Regards,
Vikram

Help required for Computer idiot

Similar Messages

Maybe you are looking for