Help required in  cursor key

Hi All
I have an requirement to implement the cursor key need to move accordingly in the textfields.
I have list of JTextFields in the JInternalFrame. When I press the up arrow key the cursor should move to top JTextfield and similarly for down arrow key.
Same need to be done for right and left arrow key.
Please suggest me how to implement this scenario.
Thanks in Advance

implement your own set of forward/backward traversal keys,
and your own FocusTraversalPolicy

Similar Messages

  • Help Required for Mapping Key figures from Cube to APO Planning area.

    Hello Experts,
    We have created cube in APO BW and now we want to map it to Planning area how we can map.
    Can any body explain how we can map keyfigures?
    What is the use of livechache how it will be updated?
    Regards
    Ram

    Hi,
    I am not very sure about the 9ARE aggregate (haven't used it in backups), but RTSCUBE is used to copy time Series (TS) KF data from cube to planning area (SNP or DP).
    Are you trying to restore some time series data from your backup cube to the planning area? If yes, then do a mapping of characteristic from cube to planning area in RTSCUBE, and also map the TS KF between cube and planning area.
    If your KF is not a time series KF, then you can't copy it from cube to planning area. You could get data to cube for some reporting, otherwise I am not sure what use the backup is for you. For SNP, most of the data would be received from R/3, so there's not much point in having a backup.
    Hope this helps.
    Thanks - Pawan

  • Frame accurate editing help required.

    Is there no iMovie 11 Help section that instructs you how to edit a movie (cut footage out you no longer require etc.), preferably to the frame.
    The Get Started section of help jumps from Lesson 3 adding video to Lesson 4 Enhancing your project.
    Is it me?

    Thanks, thumbnail slider helps but actual frame editing seems a bit hit and miss, sometimes works sometimes doesn't (sometimes cuts 2 frames rather than 1), I found it easier (and more accurate) to cut a few frames away from where i wanted and then select an individual frame and move this using the Left and Right cursor keys before deleting the unwanted frame(s) using Cmd+X to cut selected frames.
    BTW I eventually found some editing help in Browse help (there is none in the Get started section, although it is demonstrated in a video in lesson 3, 'Add video to your project') but it was well hidden!
    Browse help/Create an iMovie project/Trim video clips/Trim unwanted frames from a video clip.
    Why they hide it here i'll never know, surely everyone wants to trim their video, or is it just me,haha.

  • I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

    I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
    Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
    The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
    I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem.  I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
    I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
    I am in film competition overseas and need to have deliverables in less than a month's time.  I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
    Any assistance would be greatly appreciated.

    Still getting software freezes but found a way to mitigate for the mean time.
    Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
    You will want to highlight Adobe QT32 Server.exe
    Right click and select "End Process Tree"
    You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
    If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
    CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
    Right-click to "End Process"
    No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
    Hope this helps until the bug is fixed.

  • Excel 2013 not switching cells with cursor keys

    Hello
    I am currently having trouble with excel 2013 x64
    When i use the cursor keys like in earlier versions of excel, instead of navigating through cells, the whole sheet scrolls by that cell in one direction. I am not sure if I have changed the settings or not and any help making it work like older versions
    of excel and the 32 bit edeition.
    Thank you

    Maybe you have accidentally pressed the Scroll Lock key (sometimes the key says ScrLk. Most keyboards have a light to indicate that Scroll Lock is on. Pressing the key again turns it off.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Consistant Scrolling position between cursor keys and mouse - how to do it??

    When I read with Adobe Reader, I often use the mouse on my laptop and scroll the pages down with the scrollbar and then become engrossed  in reading the article.
    Being engrossed, however, I also sometimes press the cursor down key, with the expectation that it will scroll the page down from the current position I am reading from.
    Unfortunately it jumps to whereever it was 50 or so pages before, or to the start and I have to mess around trying to find my place.
    It's deeply, deeply irritating and slows down my reading significantly.
    I have read all the Adobe reader help and settings, but cannot find anywhere I can change this behavour. I
    Anyone else affected by this and if so how did you overcome it?

    I shoud be clearer and say that it jumps to wherever the cursor was last placed by the cursor keys.
    Can't believe its just me who has this problem....

  • Cursor keys for scrolling in listbox (PnlTreeView)

    Hi everybody,
    I have developed a plugin for InDesign CS2 that is based on one of the examples included with the SDK, namely the PanelTreeView example. My plugin connects to an Oracle database, interacts with a remote file storage repository, exports documents in various formats - all things that I added to the example which are working really fine, but I've as of yet been unable to add something that should be really easy. The SDK docs and existing threads here haven't revealed much that would help me, so here's what I would like to do:
    If you've ever seen the PanelTreeView example, you'll know that it displays files (located in a folder) in a hierarchical tree (originally multiple levels deep, but in my own plugin only one level deep, though that doesn't matter). In order to scroll up and down in said tree, there is a scrollbar on the right of the treeView widget, just as you would expect, BUT: I'd like to be able to scroll up and down using the cursor keys. That is, when the user has selected an element in the tree and presses "Cursor Down", I want to selection focus to jump to the element below the one currently selected. And once I've reached the (visible) end of the treeView, I want it to scroll down as if the "down arrow" of the scrollbar was pressed. So all in all nothing special, only standard behaviour you have seen all over the place in zillions of apps.
    The only question is: How do I achieve that? Any pointers to specific sections and / or examples in the SDK docs? I figure I need to implement some sort of keystroke handler that is only active when the user has focussed my treeView (as the cursor keys have other functions otherwise, like scrolling in the currently open document of something). Sounds easy, but where do I start?
    Any hints would be very much appreciated! Big thank-you's to all of you in advance!
    Greetings,
    Nils

    Firefox Button > Options > Accessibility tab > Check Always use the cursor keys to navigate within pages.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • How can I get cursor keys to work properly in Excel under Mavericks?

    I recently upgraded from Snow Leopard to Mavericks on a 24" iMac, with  wired Apple USB keyboard and mouse. The cursor keys do not work properly in Excel 2011 - instead of navigating through the spreadsheet, they move the spreadsheet up, down, or sideways within the active window. Booting in safe mode did not help. All software is up to date. The cursor keys work as they should in other apps. I have also tried this with peripherals disconnected but that made no difference. Suggestions, anyone?

    Need more information. The drop down calendars are a custom JavaScript that has been developed by a number of different people and use many different methods so without which one and how you implemented it ion the form it hard to determine what is going on.

  • How do I remove scrolling from the cursor keys which was recently applied after downloading an 'Add-on'?

    I recently downloaded an add-on called 'easy scroll' or something similar. It has meant my cursor keys now scroll up and down in the browser. However I use a web application that requires the use of the cursor keys to select options not to move around on the page. Can you tell me how I can reset scrolling to not use the cursor keys?
    Thanks.

    See:
    * [[Troubleshooting extensions and themes]]

  • [Cp] Select object from the timeline and move it on slide with cursor keys ?

    Hello,
    I don't know if there's a shortcut for this :
    Sometimes, it's easier to select an object from the timeline but if you try to use cursor keys to move it, you're in fact moving IN the timeline.
    Is there a way to switch to Slide edition ?
    Thanks.
    PJ

    You can not only use the cursor keys, but also in combination with other keys. And indeed, you have to move the cursor over the stage:
    http://blog.lilybiri.com/shortcut-keys-part-1-moving-and-resizing-obje    about shortcut keys for the stage
    http://blog.lilybiri.com/tiny-timeline-tidbits    about shortcut keys for the Timeline
    There is a list with shortcut keys in the Help, but not complete.

  • Regarding closure of Help Screens on Escape Key.

    Hi
    I am using javax.help API to build help screens for my application.
    Everything is working fine now I have a requirement to dispose the help window on escape key.
    As soon as the help icon is clicked I am delegating the ActionEvent to CSH.DisplayHelpFromSource.
    Now I need the help window in my hand to add keylistener and dispose it on escape.
    Can anyone pleae help me out.
    Thanks In Advance
    Sharmila Tankala

    //  Handle escape key to close the dialog
    KeyStroke escapeKeyStroke = KeyStroke.getKeyStroke(KeyEvent.VK_ESCAPE, 0, false);
    Action escapeAction = new AbstractAction()
         public void actionPerformed(ActionEvent e)
               setVisible( false );
    getRootPane().getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW).put(escapeKeyStroke, "ESCAPE");
    getRootPane().getActionMap().put("ESCAPE", escapeAction);

  • Requires a network key Wepa?

    I am getting an error message
    The network "linksys_SafeAGD" requires a network key (Wep or Wepa key). 
    How can I disable this function on the setups for my Wireless - B Broadband Router?

    when it's asking for a network key (WEP or WPA), the security of your router is activated... you can disable the wireless network mode or better yet, you can check security of your router and take note of the key 1 or preshared key:
    click this
    Message Edited by 14firewall on 10-24-200610:23 AM
    "a helping hand in a community makes the world a universe"

  • XSLT mapping Help Required.

    XSLT mapping Help Required.
    Hi Experts,
    I am New to XSLT Mapping. I am practising the below Example:
    InputXML File:
    <?xml version="1.0" encoding="UTF-8"?>
    <?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
    <ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
    <Person>
    <FirstName>Anshul</FirstName>
    <LastName>Chowdhary</LastName>
    <Gender>Male</Gender>
    <Address>
    <Street>2nd Main</Street>
    <Houseno>83/b</Houseno>
    <City>Mysore</City>
    </Address> </Person>
    </ns0:MT_XSLT_Source>
    XSL StyleSheet File:
    <?xml version='1.0' encoding="UTF-8"?>
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
    Xmlns:ns1=”http://XYZ.com/Test”>
    <xsl:template match="/">
    <ns1:MT_XSLT_Target>
    <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
    <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
    </Name>
    <Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
    ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
    <City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
    </ns1:MT_XSLT_Target>
    </xsl:template>
    </xsl:stylesheet>
    The Desired Output shuold be:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
    <Title>Male</Title>
    <Name>Anshul Chowdhary</Name>
    <Street>83/b 2nd Main</Street>
    <City>Mysore</City>
    </ns1:MT_XSLT_Target>
    I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
    Anshul Chowdhary Male 2nd Main 83/b Mysore
    I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
    Regards,
    GIRIDHAR

    Hi,
    I have used below for testing.
    Input xml:
    <?xml version="1.0" encoding="UTF-8"?>
    <?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
    <ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
    <Person>
    <FirstName>Anshul</FirstName>
    <LastName>Chowdhary</LastName>
    <Gender>Male</Gender>
    <Address>
    <Street>2nd Main</Street>
    <Houseno>83/b</Houseno>
    <City>Mysore</City>
    </Address> </Person>
    </ns0:MT_XSLT_Source>
    xsl code:
    <?xml version='1.0' encoding="UTF-8"?> 
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen" 
        xmlns:ns1="http://XYZ.com/Test"> 
        <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/> 
        <xsl:template match="/"> 
            <ns1:MT_XSLT_Target> 
                <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title> 
                <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/> 
                </Name> 
                <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '), 
                    /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street> 
                <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City> 
            </ns1:MT_XSLT_Target> 
        </xsl:template> 
    </xsl:stylesheet>
    For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
    Regards
    Venkat

  • Urgent help required: Query regarding LC Variables

    Hi All
    Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
    I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
    export LC_COLLATE=en_US.ISO8859-1
    export LC_MESSAGES=C
    export LC_MONETARY=en_US.ISO8859-1
    export LC_MONETARY=en_US.ISO8859-1
    export HZ=100
    export LC_CTYPE=en_US.ISO8859-1
    export LANG=en_US.UTF-8
    Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
    1. Can someone please tell me, what each of these variable mean and how these values make a difference.
    2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
    As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
    Appreciate your help in this regard.
    Thanks
    Amit
    Hi All
    A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
    Request everyone to please give their inputs as it's a bit urgent.
    Thanks for all the help in advance.
    Thanks
    Amit
    Some help required please...
    Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
    Edited by: amitsinhaengg on Jul 22, 2009 2:06 AM

    LC_CTYPE
    Controls the behavior of character handling functions.
    LC_TIME
    Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
    LC_MONETARY
    Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
    LC_NUMERIC
    Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
    LC_COLLATE
    Specifies a collation order and regular expression definition for the locale.
    LC_MESSAGES
    Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
    You can use command
    # locale -k LC_CTYPE
    to see more detail about each type.

  • I had a problem with my mouse double(multiple) clicking when I didn't want it to, now pressing enter in a window like this will close the current window and open one of my Taboo sites, and the cursor keys don't work.

    This happens in any text entry window, but there is no problem with Wordpad or Word or other apps, just in Firefox. It's like the keyboard mapping has gotten fouled up in Firefox, but I can't find where I might check what is going on.

    You may have '''Switched ON Caret Browsing'''. press '''F7 (on Mac: fn + F7)''' to toggle '''Caret Browsing ON/OFF'''
    * click '''Firefox''' button and click '''Options''' -> Advanced -> General -> remove
    Checkmark from '''Always use the cursor keys to navigate within pages'''
    * http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * http://kb.mozillazine.org/Accessibility_features_of_Firefox
    Check and tell if its working.

Maybe you are looking for