Help required on different part of message in Messaging System
Hi Experts,
I request you to please provide me some detail information in the below points-
Suppose I am sending one mail with several attachments-
1) in Messaging System what I will receive?
is it payload with the attachments and these attachment will be different by the name like-
MailAttachment-1.xml
MailAttachment-2.xml etc?
2) what the below line will return to me what it will hold-
Message msg = (Message) inputModuleData.getPrincipalData();
3) What is Main document and main Payload?
if I do a setMainPayload(str) then what will happen to the Message?
4) What the getDocument method returns?
basically what is the difference between mainPayload and mainDocument ?
Thanks to all for their input and help
Thanks
Vinny.
> Suppose I am sending one mail with several attachments-
> 1) in Messaging System what I will receive?
Technically an email with attachments will be represented as multipart message.
When the multipart message arrives, the first part is taken as main body, the other parts as attachments.
Similar Messages
-
I cannot get my messages/text messages to work om my Hi. I am sending this thru my iPad. Respond and let me know you got it. Fun fun fun. . I did go and try to another Apple ID different from my iPhone but it still will not work. Can anyone help me?
chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do. -
Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart
What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.
-
Since installing FF4 my pages are all scrambled..... black squiggley lines that sometimes fills the whole page or different parts. It is driving me crazy! PLEASE HELP! If I can't figure it out i will have to unistall and that will suck!
Since installing FF4 my pages are all scrambled..... black squiggley lines that sometimes fills the whole page or different parts. It is driving me crazy! PLEASE HELP! If I can't figure it out i will have to unistall and that will suck!
-
Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
CheersHi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support -
Help required please. "Itunes can not read the contents of my iphone"
Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description: PC
IP Address: (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers: 10.143.147.147
10.143.147.148
Adapter Name: {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description: Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name: {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description: Broadcom 43225 802.11b/g/n
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection: PC
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number: 85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again -
I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties. -
Urgent help required: Query regarding LC Variables
Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AMLC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type. -
Urgent help required for update Plz help!!
Hi i am updating my E51 and its displaying updating software please wait estimated time left 15 minutes for the past 1 hour.
Please tell me what should i do....
Its really urgent pls help....Hi,
There might be a problem with either the NSU or the phone itself. Any updates on what happened?
Next time make sure you meet the certain system requirements before proceeding with the update.
Message Edited by nj15 on 01-Oct-2008 01:44 PM -
How to use "User Events" in different parts of an application
Hi,
"You programmatically can create and name your own events, called user events, to carry user-defined data. Like queues and notifiers, user events allow different parts of an application to communicate asynchronously. You can handle both user interface and programmatically generated user events in the same Event structure."
What you read was part of labview 7.1 user manual ( Chapter 9 - pg.12 ). I've some problems with the underlined sentence. I hope someone can help me.
When using Queues, the programmer may use a named queue everywhere in the application. there is no need to wire queue reference among VIs or using global variables to store queue reference. the name of the queue will be all that you need. I wonder if it is also possible with a event refnum that is the output of "Register for Event" node. As far as I've tested. the answer is Negative! I tried to copy-paste refnum in front panels and using the same name. but there is no connection between event refnums.
LV User manual claims that user events can be used like queues, but it doesn't seem so.
Does anybody have an idea?
Best Regards.I didn't look at Damien Gray's presentation recently, but if I remember it correctly, it is on a much higher level than what I meant, because it refers to LARGE application. This is a very simple one.
Using a functional global is not problematic CPU-wise, nor memory wise (unless you get into really big data structures, like hundreds of MBs), so you shouldn't be afraid to use it. I'm also not sure why you're afraid of the loop. The loop is only there to "hold" the USR. It only runs once. If you want, you can replace it with a for loop that runs once. I've recently learned that apparently, you can also get rid of the loop and use a local variable (look at the example called XY chart) instead of a USR. I don't think a local variable should have any more impact than a USR, but that needs to be tested. It can definitely be more convenient for some VIs where you don't have to wire the SR through the entire VI.
Anyway, you will need to have an "obtain ref" VI which will hold a 1D array of names and a corresponding array of refs. Then, you search the array for the name, and if it finds the name, it extracts the correct reference. You will also need a way to input references and names into the array and possibly a way to empty the array. You may need to have 2 levels - the inner VI will be the LV2 VI and the parent will be the obtain ref\fill array\close VI. You will need some error handling as well - what happens if you search for a name and it can't be found and so on...
Hope this helps.
Try to take over the world! -
Issue in running eCATT Scripts - Help required very urgently
Dear All,
We are running the eCATT scripts from Solman 7.0 by connecting it to ERP system R/3 4.6C. While running the scripts, we are facing some issue.
1. If we try to run the scripts then those are getting failed. The same scripts if we run after some time with out changing any code then those are running fine.
We are frequently facing this probelm.
Could you please let me know the solution. Your help is really appreciated.
Thanks,
Mahendra
Moderator Message: Urgently word is not allowed in this forum. Open a new thread without the "priority" word.
Edited by: kishan P on Sep 6, 2010 11:18 AM
Edited by: kishan P on Sep 6, 2010 11:21 AMDear Ananth,
Scripting is getting failed at different lines of code at different runs.
Thanks,
Mahendra -
Help required in Weblogic 6 - Creation & Configuration of Web Application
Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
MoinForum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin -
Help required...very urgent !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help required with an error message.
"Table Z0CL_BATCLA for object class CHARGE does not exist"Hi
It means your Z0CL_BATCLA is not assigned to object CHARGE, you have to create the linke between object and table in the table TCDOB.
You can do it by trx SCDO, but in this case you have to change in standard object.
Max -
Different parts for the same ID
Hi,
TABLE1 contains informations about programs, these include:
PROGRAM_ID (fk of program table), PART_NO, MEDIA_ID
A program can be made of different parts (PART_NO i.e., part 1, 2, 3, 4, or 5).
The media_id is the unique identifier or a VHS tape where the program is recorded on.
Parts of a program will have the same Media_id as long as the sum of their lenght does not exceed the VHS length, if that happens, the media_id for the part which does not fit the VHS will be different:
i.e. Program1 has 4 parts of 1 hour each. Part 1 and 2 will be on the same VHS (2 hours), hence will have the same media_id; part 3 and 4 will have a different media_id associated to program1.
TABLE2 contains information about the media:
MEDIA_ID (pk), MEDIA_NAME
If one program has more than one media associated to it, I need to be able to display both media_names on the same row as the program_id under the same column called VHS_Number (I asssume by using concat).
Can anyone suggest anything so that I can move in the right direction?
thanks
Message was edited by:
user564568create table table1(program_id number(2),part_no number(2),media_id varchar2(3));
insert into table1 values(1,1,'m1');
insert into table1 values(1,2,'m2');
insert into table1 values(1,3,'m2');
insert into table1 values(1,4,'m1');
insert into table1 values(2,1,'m3');
insert into table1 values(2,2,'m2');
insert into table1 values(3,1,'m1');
insert into table1 values(3,2,'m2');
table1
program_id part_no media_id
1 1 m1
1 2 m2
1 3 m2
1 4 m1
2 1 m3
2 2 m2
3 1 m1
3 2 m2
create table table2(media_id varchar2(3),media_name varchar2(9));
insert into table2 values('m1','media1');
insert into table2 values('m2','media2');
insert into table2 values('m3','media3');
insert into table2 values('m4','media4');
insert into table2 values('m5','media5');
table2
media_id media_name
m1 media1
m2 media2
m3 media3
m4 media4
m5 media5
select program_id,distinct media_name
from table2 A,(select media_id,program_id,part_no,dense_rank() over ( partition by program_id order by media_id) rn from table1) B
where A.media_id=B.media_id
is this kind of data you are looking for -
Copy and paste - can't copy parts of a SMS message
I'm getting really frustrated with the copy part of copy/paste within a SMS. In the SMS - If I tap on any number or word = nothing happens (if nothing is underlined), If I tap on a number underlined = I get the option to phone or skype?? If I double click = nothing happens, If I do a long press I the options to:COPY MESSAGE TEXTFORWARD MESSAGECOPY MESSAGE TO SIM CARDDELETE MESSAGEVIEW MESSAGE DE TAILSADD STAR If I want to copy some text (e.g. phone number, address, anything else) but not the whole SMS I cannot find a way to do it. Anyone else having this problem with SMS messages? Sometimes you need to extract info from the SMS to paste into an entry box on a website for example or to add to contacts etc. Can anyone help?
Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Unfortunately, it's not possible to copy parts of a text message in the pre installed messaging application. But if you press a number, you can open it with the phone application and copy the number from the dialer. And if you want to copy an URL, you can open the page and copy it from the URL-field.
If you want parts from a text message, my best suggestion would be to copy the text into a notepad or similar and edit the text. Thereby, you can copy it with the text you want included.
Maybe you are looking for
-
Media Encoder CC specify file output location doesn't work?
Hello everybody! When i render a video from Media Encoder CC the "specify output file location" only works if i go to preferences then select the folder,then when i reboot the PC it still says it's going to that location but doesn't. Does this happen
-
I want to show world map in regions using mapbuilder
Hi, I have uploaded obiee_navteq dump in our database.could you please let me know to spilt in world map in different regions like Europe,Africa,Middle East,Australia,Nroth America....In one map. Thanks VB
-
SQL Server std 2008 R2 SP2 upgrade to 2014 std fails, SSRS issue?
I'm trying to make an in place upgrade from 2008 r2 sp2 to sql 2012. With old installation everything (including Reporting Services) works fine, there is only one instance named MSSQLSERVER and all stuff is on one server, ssrs is native mode, compati
-
Photoshop Elements 10 - trial version - uninstall
I have downloaded a trial version of Photoshop Elements 10 in order to see if there are things I could not do with my CS3. After see the program I saw I was not interested on it so I try to uninstall but I have not found any uninstall file. I have go
-
My daughter changed the password to our ipod touch and cannot remember it. What do I do to reset it?
My daughter changed the password to our ipod touch and cannot remember it. What do I do to reset it?