Help required - Recovery of a datafile that is lost in ARCHIVELOG mode
Hi:
This is related to Oracle 10G on windows 2003 Enterprise, and it is running on ARCHIVELOG mode.
The datafile 'C:\oracle\product\10.2.0\orcl\example01.dbf is lost. Most probably when I took a manual backup i missed it.
I am not using rman rather manual backup and restore.
I mounted the database (obviously it cannot be open since it is not finding the datafile) and took the datafile offline.
I cannot take a tablespace "example" offline in mount stage.
I tried "ALTER DATABASE CREATE DATAFILE <old path / old name> AS <old path / old name>.
Oracle is not allowing saying that the file is read-only.
I altere the database open and took the tablespace offline immediate and then tried the "ALTER DATABASE CREATE DATAFILE <old path / old name> AS <old path / old name>" command. But no luck.
_Please provide some steps so that I can bring it back._ I am looking many sites but everywhere is RMAN.
Thanks in advance - Caesar
>
I am looking many sites but everywhere is RMAN.
>
Yes and for a good reason. For example, RMAN would not have forgotten to backup this datafile :-)
Regardless, you messed it up. Look at DBA_TABLES for the owner & tables that resided in that example tablespace. Probably, it was just our demo schemas. You can recreate them without having to recover then. Look at
http://download.oracle.com/docs/cd/E11882_01/server.112/e10831/toc.htm
for a guide how to do that.
Also, rethink your refuse of RMAN, I would suggest
Kind regards &
Don't forget to backup the datafile :-)
Uwe Hesse
http://uhesse.wordpress.com
Similar Messages
-
Help required with pop up window that won't go away
I need to re-configure my network settings, but when I access 'network' in 'system preferences' a pop up window appears that states 'Your network setting have been changed by another application'. When I click 'OK', the window just re-appears and I cannot therefore access the network window. Help!
Look at this link. http://discussions.apple.com/thread.jspa?messageID=9372513
I did BDAqua's suggestion
To stop the pop-up, Go to System Preferences: Security. Check the box next to "Require password to unlock each secure system preference." Then lock Security.
Cheers, Tom -
Recover datafile using cold backup in archivelog mode
Hi,
I have lost one of my datafiles i.e New.dbf from the disk. I have full database cold backup of last sunday. Also I have the archives. Is it possible to restore and recover only the lost datafile? Please help.If you used RMAN to create the backup, then use RMAN again to restore that one datafile alone (RESTORE DATAFILE n) and then recover it (RECOVER DATAFILE n).
If you didn't use RMAN but you are sure that the backup was a COLD Backup, manually restore the datafile and then issue a RECOVER DATAFILE n from the SQLPlus command.
In either case you must ensure that the datafile is OFFLINE before you restore the file -- or take it OFFLINE with ALTER DATABASE DATAFILE n OFFLINE IMMEDIATE before doing the restore.
After the RECOVER is completed, you must bring it ONLINE with an ALTER DATABASE DATAFILE n ONLINE
Hemant K Chitale
http://hemantoracledba.blogspot.com -
Possible to show datafiles that require level 0 backup?
We have some large databases with many datafiles. Is there a command to list / report which datafiles dont have a level 0 backup?
From what I am seeing report need backup - ignores reporting datafiles that may just have a level 1 backup - even if there is no level 0 to base it from.
Is this correct?
Finding this out the hard way when creating a duplicate and finding out that the duplicate fails as it cant find the level 0 for some datafiles
(Linux 11gr1 100tb db Exadata)
Thanks for helping me make sense of this..
DarylI tried that .. it doesnt list any issues but I know there is..
RMAN> report need backup
2> ;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 89 days
Report of files that must be backed up to satisfy 89 days recovery window
File Days Name
Nothing..
but look at this.. there is no level 0 backup .. it fell off .. ie over 89 days old.
RMAN> list backup of datafile 71;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
93363024 Incr 1 793.18G SBT_TAPE 10:39:55 14-OCT-12
BP Key: 93363042 Status: AVAILABLE Compressed: NO Tag: TAG20121013T210225
Handle: bk_PCINF_69501_1_796597627 Media: JW0536
List of Datafiles in backup set 93363024
File LV Type Ckp SCN Ckp Time Name
71 1 Incr 984352498996 09-OCT-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
93551429 Incr 1 10.60G SBT_TAPE 00:04:28 20-OCT-12
BP Key: 93551451 Status: AVAILABLE Compressed: NO Tag: TAG20121020T210951
Handle: bk_PCINF_72018_1_797202927 Media: JW5859
List of Datafiles in backup set 93551429
File LV Type Ckp SCN Ckp Time Name
71 1 Incr 984352498996 09-OCT-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
93978586 Incr 1 10.60G SBT_TAPE 00:07:03 27-OCT-12
BP Key: 93978613 Status: AVAILABLE Compressed: NO Tag: TAG20121027T211433
Handle: bk_PCINF_74209_1_797807878 Media: JW4007
List of Datafiles in backup set 93978586
File LV Type Ckp SCN Ckp Time Name
71 1 Incr 984352498996 09-OCT-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
94415892 Incr 1 10.60G SBT_TAPE 00:05:55 03-NOV-12
BP Key: 94415905 Status: AVAILABLE Compressed: NO Tag: TAG20121103T211332
Handle: bk_PCINF_76973_1_798412667 Media: JW5871
List of Datafiles in backup set 94415892
File LV Type Ckp SCN Ckp Time Name
71 1 Incr 984352498996 09-OCT-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
94725007 Incr 1 10.60G SBT_TAPE 00:06:13 11-NOV-12
BP Key: 94725015 Status: AVAILABLE Compressed: NO Tag: TAG20121111T000027
Handle: bk_PCINF_80432_1_799027731 Media: JF0177
List of Datafiles in backup set 94725007
File LV Type Ckp SCN Ckp Time Name
71 1 Incr 984352498996 09-OCT-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
95026253 Incr 1 973.96G SBT_TAPE 06:48:17 18-NOV-12
BP Key: 95026315 Status: AVAILABLE Compressed: NO Tag: TAG20121117T220628
Handle: bk_PCINF_83850_1_799626027 Media: JW4286
List of Datafiles in backup set 95026253
File LV Type Ckp SCN Ckp Time Name
71 1 Incr 984352498996 09-OCT-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
95819737 Incr 1 448.65G SBT_TAPE 07:56:00 02-DEC-12
BP Key: 95819747 Status: AVAILABLE Compressed: NO Tag: TAG20121201T221733
Handle: bk_PCINF_92173_1_800922570 Media: JW3707
List of Datafiles in backup set 95819737
File LV Type Ckp SCN Ckp Time Name
71 1 Incr 1016584342670 01-DEC-12
RMAN> -
ORA-10458: standby database requires recovery
hi
kindly help me... i got error when standby open in read only mode
SQL*Plus: Release 11.2.0.3.0 Production on Sat Jan 19 14:37:46 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 5344731136 bytes
Fixed Size 2237776 bytes
Variable Size 1275071152 bytes
Database Buffers 4060086272 bytes
Redo Buffers 7335936 bytes
Database mounted.
SQL> Alter Database Recover Managed Standby Database Disconnect;
Database altered.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
Database altered.
SQL> ALTER DATABASE OPEN READ ONLY;
ALTER DATABASE OPEN READ ONLY
ERROR at line 1:
ORA-10458: standby database requires recovery
ORA-01152: file 22 was not restored from a sufficiently old backup
ORA-01110: data file 22: '/archive/data/undo01.dbf'hi CKPT
I executed the action plan as you recommend and got below information;
SQL> recover standby database;
ORA-00279: change 5983485554580 generated at 01/01/2013 19:27:17 needed for
thread 1
ORA-00289: suggestion : /archive/PROD_1_750568044_45027.ARC
ORA-00280: change 5983485554580 for thread 1 is in sequence #45027
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
'/archive/PROD_1_750568044_45400.ARC'
ORA-00310: archived log contains sequence 45400; sequence 45027 required
ORA-00334: archived log: '/archive/PROD_1_750568044_45400.ARC'
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 22 was not restored from a sufficiently old backup
ORA-01110: data file 22: '/archive/data/undo01.dbf'
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01666: control file is for a standby database
SQL> alter system switch logfile;
alter system switch logfile
ERROR at line 1:
ORA-01109: database not open
---------------------------------- and some other activity but still not found any solution-------------
RMAN> recover database until sequence
2> 45026;
Starting recover at 23-JAN-13
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/23/2013 16:42:47
RMAN-06556: datafile 1 must be restored from backup older than SCN 5983484595990
RMAN> recover database until sequence 45027;
Starting recover at 23-JAN-13
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/23/2013 16:42:59
RMAN-06556: datafile 22 must be restored from backup older than SCN 5983485554580
RMAN> recover database until sequence 45025;
Starting recover at 23-JAN-13
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/23/2013 16:43:09
RMAN-06556: datafile 1 must be restored from backup older than SCN 5983484160276
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 01/23/2013 16:43:25
ORA-01666: control file is for a standby database -
Urgent help required: Query regarding LC Variables
Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AMLC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type. -
Help! Urgent help required for adjusting image
Hi - hoping someone can help.
I sent the attached PDF - http://www.sensecreative.co.uk/custUploads/SENSE-36-7977-95928/77317/SENSE-36-7977-95928-7 7317-2440.zip - to print with Sense Creative. The cards were printed and they've turned out quite visibly green on the reverse (where it should be white).
I've printed the artwork on several printers I have access to and it looks as it should, however SC are saying that the issue is with the artwork
"The green tinge you see on the reverse of these cards is prevalent in the artwork. The makeup of the background is approximately c-15 m-11 y-15 k-0. the predominant levels of the yellow and cyan will give you the green tint. Upping the levels of the artwork in or substituting the cyan, magenta and yellow levels with more black in Photoshop will likely give you the result you require. We are satisfied that in both instances, the artwork has printed correctly and the colours are well within tolerance given the nature of the artwork."
So, I'm in a bit of a pickle as the cards are needed for an event next week.
How do I change the image levels? Or are they talking nonsense and trying to pass the buck?
Help!station_two,
Acrobat View> Tools> Print Production> Output Preview: Object Inspector will call out the objects' profiles if you click on each one individually (in this case all appeaar to be "Device CMYK" or Untagged CMYK)
untagged CMYK has the same pitfalls as untagged RGB... if one applys or assumes the wrong SOURCE PROFILE it doesn't CONVERT colors to Monitor RGB or Print Space correctly -
Help required - Sales order item is partially delivered but the item grayed
I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
Item 1 confirmed qty 1 and delivered qty is 1
Item 2 confirmed qty 10 and delivered qty 10
Item 3 confirmed qty 1 and delivered qty is 1
Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
even if I do ATP the qty is not confirming for the remaining 11 pieces.
Why is that? How to make that item out from GRAY.
How to confirm the remaining 11 qty for that item.
Help required as early as possible.
Appreciate ur help guys
Radhahi Radha, how are you ?
---the partial deliveries in master data must have not been mentioned.
---the deliveries should be upto target quantity.
---check order type, item category and schedule line category.
---check unrestricted stock availability.
thank you
regards
Khera. -
HELP - I deleted an adobe file that I saved to a memory stick and I need it back really badly
Try this Google search:
http://www.google.cl/#hl=es&tbo=d&sclient=psy-ab&q=free+data+recovery+software+for+flash+d rives&oq=recovery+software+for+flash+drives&gs_l=hp.1.3.0i30j0i5i30l3.9708.24161.0.34539.3 4.26.0.8.8.0.378.7320.2-21j5.26.0...0.0...1c.1.lb0o4diaEEU&pbx=1&bav=on.2,or.r_gc.r_pw.r_q f.&bvm=bv.1355534169,d.eWU&fp=ff7a879957bf69ba&bpcl=40096503&biw=1112&bih=865
It gave me plenty of hits, but be a little careful. I would suggest using the free trial of one of the paid products. As I have never used one, I cnnot recommand any.
And remeber: every time you write something on that flash drive, you risk overwriting your lost file, thus decreasing your chances of recovering it. -
Help required regarding webCenter Portal Development
Hi Sir ,
I'm a Student doing Software Engineering and Developing Software Project Portal (automation of Institutional(university Final Year Software Projects Process)
Previously My university was not allowed me to develop Final Year Degree project on PLATFORM.. so I've tryed to develop it using Java Portlet AAI and other methodologies .. but unfortunately I've fielded to develop that Portal
now my university has allowed me to develop on WebCenter Portal Development Framework... I've little know ADF ... now I only have 12 day to develop and deliver .I'm following
Yannick Ongena website www.yonaweb.be/using_multiple_navigation_models_template_webcenter_11g_ps3_0
and following multiple blogs
BUT THE PROBLEM IS THAT
these blogs and website are not very much responsive .. I've very less time .. I need urgent reply for my problems that I'm facing throwout development
I've Installed
Jdeveloper 1.1.1.1.6.0
Xe 11g db 11.2.0.2.0
WebCenter Portal Development Framework
As I mention I've NOT MORE THAN 12 days, Please respond to My REQUEST .. Also Refer me To a PERSON WHO CAN HELP ME FOR ABOUT 10 days
and
share me BLOGS / WEBSITE / REFERENCE MARTIAL .. that will help me
one of problem is that I think DEV schema is Created when we install RCU , I've Created UCM and PORTAL schema through RCU .. But mistalenly I've Removed the DEV schema as well
and facing the below problem
I’ve Created DEV , UCM and PORTAL schema from RCU. and Then try to install UCM ,when schema password screen appear for LOGIN and Create weblogic domain , It tell me INCORRECT PASSWORD, SO , I’ve DROP these 3 schema using RCU , during DROP schema, different errors appeared , and I’ve DELETED the middle ware\rcu_Home folder and Unzip the rcu.rar fresh file to the same directory
NOW
when I RUN rcu.bat and selected CREATE SCHEMA then RCU WOULD NOT ALLOW ME TO CREATE SCHEMA FOR PORTAL , DEV , UCM ..and also they appear in combo box to select
BUT I’ve ALREADY DROP THAT
I think it only droped not DELETED
tell me the sqlplus commands fro DELETE schema. and also tell if it is DANGEROUS to delete some schema(example DEV schema) as I’m developing portal via WEB CENTER -Jdeveloper(integrated weblogic) , Xe , RCU, UCM )
WAITING FOR REPLY
BEST REGARDS
]|_|(¯`·._)a¿])@ngsankar @Nasir thanks for Reply
NO Sir I have to deliver some functionality (basic functionality) on 5 Nov. and then they'll give us 1 more month if our work is satisfactory
AND I'm not a very Beginner to ADF and WebCenter ..I've Installed the environment and Following Yanic website and parallel implementing my requirement .. It is rapid app dev. I think I cant develop satisfactory app in hours if any I can tell me that HOW TO IMPLEMENT THAT SPECIFIC Requirement AND FEATURE .. its easy I think ..and I will InshaALLAH .. its do or die for me
Sir in 1 day I can finalize and develop UI ..(JSF pages and this bindings and template )
for its Content I was Started UCM and then I stuck ,
I Basically need to provide JSF Pages and portlets for Users (Student groups - Project Supervisors - Project Coordinator )
I have to create Users and their Pages(Project Coordinator - Project Supervisor and STUDENT Group's)
1)Project Coordinator is the Head Who Allocated Project Supervisors to the Student Group in response to Messages(sent from the portlet at home page)from the students that desire to make group and want desire supervisor . in response to this message the Supervisor can Reply and ASK FOR MEETING and the the coordinator has the authority to ALLOCATE
2)Project Coordinator Create PLAN (1 year Plan) in tabular form (for example Project Group Supervisor and Its STUDENT GROUP has to Deliver 20 MILESTONE Deliverable throughout the year(Project group Supervisor can Divide Each MILESTONE into TASK and SUB TASKS...and Student Group has to Upload )
Supervisor can give the task to student group and student group has to upload /Submit the required Deliverable /(task file ) supervisor within the given period MARK THIS TASK AS AN OK AND GIVE ANOTHER TASK OR ASK FOR METING
in this way We achieve/provide
Provide Central Repository for the Whole Software Projects that are Valuable ..
ALSO DOCUMENT TRACEABILITY is achieved
Workflow management (Task given and submission and meetings and attendance etc)
This Functionality plus Basic ADF and WebCenter built in Functionality can also improve Collaboration and Productivity and Performance
I've very less time AND willing to work.... waiting for Help and suggestions -
Help required in Weblogic 6 - Creation & Configuration of Web Application
Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
MoinForum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin -
hello,
i have just downloaded oracle 10g softwares ...
i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
a friend of mine told me that i need to install application server in order to run forms ...
1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
2ndly i m facing problems in installation of Oracle AS 10g ...
i have studied online documentation but it ain't so helpfull for me ...
it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
what should i do ... urgent help required ...
regards,
yasir ([email protected])@ brusardl and rkogelhe
thanx for replying ...
brusardl
i didn't changed da port while installing Oracle AS ...
inspite i stopped all services using/listening from dat port ...
now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
rkogelhe
can u plz tell me what is BI version of Forms ...
and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
Another Problem:
I re-installed Database, Developer suite and then Oracle AS infrastructure ...
everthing went fine ...
when i installed Oracle AS Middle Tier - Business Intelligence & Forms
during installation ... some configuration assistants failed/skipped ...
da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
is dis a installation useless ... can i fix dis ?
regards,
yasir -
Help required from JDeveloper Development Team.
HI there,
I Download the JDeveloper 10.1.2 (1811) from OTN, But the downloaded archive file is unable to open. I did the download once again but I am facing same problem. I want to JDeveloper 10.1.2 for the installation of BI Beans 10.1.2.
Help required from JDeveloper Development Team
Thanks For Your Time,
Regards,
ViSHAL.Please use an informative Subject line, there is more chance that people will read the post.
All we can suggest is that you try the download again. -
Help required integration opensso with OAM
Help required integration openssowith OAM
Edited by: user13111258 on Mar 24, 2011 5:58 AMYou will need quite a lot of help so you might consider hiring someone who knows both OpenSSO and OAM. Anyway, which version of OAM are we talking about here as this is very important to know, as well as what types of agents that are involved and whether this is a single domain or cross domain solution.
-
Pricing Error (help required)
Is there any routine which includes the tax value in R100 as well ,currently the problem is that the 100% Discount condition is only including the net price
And in the pricing procedure i m using two prices one price of tax calculation and the other is consumer price first i calculate the tax from base price then i deduct the tax from the consumer price this calculation is working fine through standard routines.
Only problem is that when i enter NRAB and R100 at end it only includes Net Value which is calculated through Formual using condition type NTPS
Kindly Help Required ASAPHi ABAPAR,
I m not getting the exact picture of what U desired, from your pricing procedure.
As you r using multiple free goods condition type...anyway.
If you wanted to make the calculated tax "amount + "as a basis for the calculation of particular condition type.you can use the functionality of subtotal.
That mean go and assign one subtotal no. to subtotal column in your pricing procedur to all condition type to which you wanted to make as a basis for furthur calculation.(this settings allow the total of all values in one subtotal).
And finally U can assign this subtotal no.to the "alt.cal.B.value "of pricing procedure for the calculation of particular condition type.
If you r using any std condion type that come up with certain routine like NRAB or somthing...possibly that will not allow u to do this settings. so in this case clear your free goods requirement or use any new condition type. i.e . Z creation.
consult your SD consultant.
karnesh
Maybe you are looking for
-
I have an iPad Air (wifi only) and iPhone 5s. I'm wondering if the following features exist in iOS 8.1.1 and maybe I've missed it? #1- Raise to speak for Siri. I know there is "Hey Siri" but in order to use that it requires you to be a wall-hugger. I
-
How can I get a picture to display the date it was taken?
How can I get a picture taken by my z10 to display the date it was taken?
-
Latest Version of Player not playing YouTube videos to end.
Version 11,4,402,287 on Chrome and Safari play YouTube video short of end. 1080p is like 15 sec from end, 720p plays to 10 sec from end, 480p to end or just short of end. Seems like a buffering problem. But Version 11,5,31,101 on Chrome Canary plays
-
Ins. WebDynpro handling with tables form backend which are packed into List
Hi! How can I basically handle a List inside WebDynpro which has been populated by a RFC FuntionModule's table from backend. With iterate() I can't acces its values like a table. What is the standard procedure for these cases ? Even I have tried to
-
What's going on -- when save Japanese charcters to database?
From this Oracle Forum discussion, I learned that when you get the input value(from html form), you have to do a 'translation', because of Servlet design behavior, for example: translatedParameter = new String(request.getParameter ("param").getBytes(