Help required to get Talk21 e-mails via Outlook

Although not that new to using Microsoft I'm a bit of a newbie to Windows etc I have MS Office Professional 2010.
I have always managed to set my Talk 21 address up in Outlook and iPhone but I have to concede defeat after about 3 hours of trying. (mind you it's taken a few minutes to work out this forum)
Suggestions from anyone who has succesfully achieved this would be appreciated.
Sadie
NB: This post has been dictated using voice activated software and may account for any errors in wording and/or context.
Solved!
Go to Solution.

Cleaninglady wrote:
Although not that new to using Microsoft I'm a bit of a newbie to Windows etc I have MS Office Professional 2010.
I have always managed to set my Talk 21 address up in Outlook and iPhone but I have to concede defeat after about 3 hours of trying. (mind you it's taken a few minutes to work out this forum)
Suggestions from anyone who has succesfully achieved this would be appreciated.
Sadie
NB: This post has been dictated using voice activated software and may account for any errors in wording and/or context.
Hi Sadie. Welcome to the forums.
If I may say so, you say you've set up your Talk21 email address via Outlook before, and now have Office 2010. The latest version of Outlook is perhaps slightly different to previous, but should be very similar.
Are you getting actual errors when setting up the account ? or trying to send/receive emails ?
I believe that the talk21 servers are still working, pop3 (for receiving) is in.talk21.com and smtp (for sending) is out.talk21.com - however if not then you will need to use the trick of adding .t21 at the end of the username, replace @talk21.com with @btinternet.com and use mail.btinternet.com for both servers.
The problem will be if you still want to use your talk21.com email address as the "From" address - you will need to go through address verification, but perhaps go through that later if required.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Similar Messages

Create Hyperlink when sending mail via Outlook

Hi all,
I want to mail a hyperlink from within function module via outlook. Creating the hyperlink and starting function <new mail> in outlook works just fine. But when the document (word, pdf, etc.) contains blanks, the hyperlink gets interrupted.
For example:
h:\temp\word1.doc (this will work just fine).
h:\temp\word 1.doc (error when displaying hyperlink in body of new mail).
I know that sometimes on the internet blanks are displayed as %20. But how to insert this in an ABAP statement using CONCATENATE?
Best regards,
Micky.

Hi Micky,
Try using replace command... to replace SPACE with %20
Regards,
Raj
See the example below:
REPLACE
Basic form
REPLACE f WITH g INTO h.
Addition
... LENGTH len (length specification for field f )
Effect
Replaces the first occurrence of the contents of field f in field h with the contents of field g . All fields are handled in their defined length; this means that closing blanks are not ignored.
The return code value indicates whether the string f was found in h and replaced by g :
SY-SUBRC = 0 String replaced.
SY_SUBRC = 4 String not replaced.
Example
DATA FIELD(10).
MOVE 'ABCB' TO FIELD.
REPLACE 'B' WITH 'string' INTO FIELD.
returns:
FIELD = 'AstringCB', SY-SUBRC = 0

Tables for Sent Mail via Outlook Integration Add-On

Dear All,
I am using Outlook Integration Add-On to send the mail via Microsoft Outlook. But I have noticed that whatever I sent using this add-on, the record is not saving in the database tables i.e. OALR, OAOB or AOB1. Can you please tell me whether it is the default behavior or SAP stores this data in other tables. ? I am using SAP 8.82 PL-09
Please help me. Any kind of help would be appreciated.
Thanks & Regards
Ankit Chauhan

Hi Nagarajan K,
I checked it with @BO_ but not able to find it. Still you can access my system.
Team ID is: 412 665 665
Password: 9286
Thanks & Regards
Ankit Chauhan

Delivery date not getting recalculated while approving via outlook

Hello,
After creating a shopping cart and if we approve after say 3 days via SRM portal the delivery date gets recalculated and takes into reconsideration these days and this is the value that gets populated in the purchase order
But if the approval is via "OUTLOOK", the delivery date is not recalculated and the old delivery date is sent into the PO.so sometimes the delivery date becomes in the past.
Although BAdI takes into consideration delivery time+lead time calculation for SRM portal approved shopping carts it is not taking into consideration for OUTLOOK.
Is there any solution for this
Regards

Hi JJ
BADI BBP_DOC_CHANGE_BADI- BUS2201 . while creating PO try to validate them if you are in ecs mode
i believe standard SAP dont recalculate delivery date while creation of PO.
regards
Muthu

Why can't i get my verizon mail on outlook? It just recently stopped getting my mail saying I have the wrong username or password. Both are correct.

recently cannot get Verizon mail on Outlook (ipad) - always could before - can send but that's all on Verizon?

There is no outlook on iPads.
Check your email settings.

Issues with incoming mail via Outlook

Hello,
I have setup several email accounts using Business Catalyst. Ican access all of them through Webmail. and most of them via Outlook.
one account hower shows issues via Outlook:
* I can access it via Webmail.
* I can send emails from Outlook
* But I cannot receive emails on Outlook.
Again, I can have the emails from other BC accounts, but not on this one. my incoming server port is 110, outgoing is 8025.
did someone face this issue once?

Thanks Sydney.
For your record, or for future treatment, the email address that had issues was [email protected]; while simultaneously, on the exact same computer and outlook software, the address [email protected] was working properly and as expected.
If you face similar type of issues, and remember my case (J), please do not hesitate to keep me posted: I hate not knowing what happened, question of trust.
Thanks,
Philippe

Help Required in getting personolization

Hi ,
I am new to OAF and need help in OAF personalizations. I have a few requirements below please let me know what fileds to be changed to acheive these.
1) While creating a supplier site by default purchasing, Payment flags to be check. I have tried to change the filed value (Initial Vlaue) to Y for purchasing check box and pay check box for address form. But changes are not reflecting. Am I updating the correct field?
2) when Void payment the reason should be mandatory. Here in this case I am not sure where exactly we need to make the personalization
3) for check payment printer name should be defaulted. Where we can do this setup
Please suggest.

Hi ,
U need tto get the URL of the called application through method
construct_wd_url and generate the popup window for the second application with the above URL .
in ur first app , crate an event on lead selection of the table and write the following piece of code :
   DATA:
      w_url   type string,
      w_value type string.
         call method cl_wd_utilities=>construct_wd_url
        exporting
        application_name              = u2018 u2018 // here specify the name of the called application
      importing
        out_absolute_url              = w_url.
   * make the Value type compatible that has to be passed with the URL
w_value = lv_ebeln.
* Attach the parameters and its value with the URL that
* have to be passed to the 2nd application
call method cl_http_server=>append_field_url
    exporting
      name = ' '   // input parameter here
      value = w_value
    changing
      url   = w_url.
* generate a popup window for the 2nd application with the above URL
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window         TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_external_window(
                   url = w_url ).
lo_window->open( ).
Now in the doinit of ur called application , u can get the value for that particular input parameter
[code}
DATA:
lv_param type string.
lv_param = wdr_task=>client_window->get_parameter( ' u2018 ). // paramtr name
Now select the appropriate values in internal table for this and bind it to ur context node ..
I hope this helps..

Help require to get the XML output to design template- JDE

Hi Friends,
I am asking this question from JDE perspective.I want to design XMLP Template for R40572 Check Printing.
When I upload an blank template and after attaching RD, When ever I initiate a check from P04572 Application.RThe Write Row exit will lead to check printing which in turn will call a batch R04571 and this batch will call R04572(Which I require the XML output) since it is the second report and we cant direct it to local server I am not able to get the XML output..
Another think is since its running in server i think its not taking the RD modification we done in loacl because it always fires PDF .

Hi,
I assume you're Using XMPOSA for generating the files locally. What I suggest is, you set the application to run with the report definition by default. That way, even when it is called, it will be called along with the report definition. You can take the resultant XML file from P95630
hope this helps,
-Domnic

Help required: Splitting up complex script logic via *LOGIC_BY

Hello experts,
I have a very long and complex logic which I am trying to split up into different sections. I am using *LOGIC_BY within the default logic whereas the ACCOUNT dimension is my trigger. Hence I have created a new property called "LOGIC" for every base level account.
I am using BPC MS 7.0 (release 7.0.110)
Simple example to explain:
ACCOUNT description - LOGIC property
PRICE1 - LOGIC_DEMAND
PRICE2 - LOGIC_DEMAND
AMOUNT1 - LOGIC_DEMAND
AMOUNT2 - LOGIC_DEMAND
REVENUE1 - LOGIC_DUMMY (is calculated via LOGIC_DEMAND by =PRICE1 * AMOUNT1)
REVENUE2 - LOGIC_DUMMY (is calculated via LOGIC_DEMAND by =PRICE2 * AMOUNT2)
REVENUE_PL - LOGIC_DUMMY (is calculated via LOGIC_DEMAND by =REVENUE1 + REVENUE2)
Default logic (default.lgf) just contains the following:
*LOGIC_MODE = 2
*LOGIC_BY = ACCOUNT
Data entry:
PRICE1 = 10
PRICE2 = 20
AMOUNT1 = 10
AMOUNT2 = 20
REVENUE1 (to be calculated/expected) = 100
REVENUE2 (to be calculated/expected) = 400
REVENUE_PL (to be calculated/expected) = 500
Result:
As I am sending data, all revenue accounts are calculated to ZERO.
If I change my default logic manually to
*INCLUDE LOGIC_DEMAND
then everything works. REVENUE1 and REVENUE2 are calculated to 100 / 400, and REVENUE_PL is 500.
What did I do wrong? Can anybody help? If there is someone who can post a short example, I would be very grateful.
Best regards,
Stefan

Hi BI,
hmm i guess there is no tools to debug line by line is SAP BPC.. guys is there any third party software that can do this??
Thanks, hope helps

Help required in getting the header details.

Hi All ,
In my first WDA , I am showing the header details of Purchase Order for a input parameter in table
and now I want to show the items details for that particular PO on lead selection of the the PO details
in my second application . How can I achieve the desired functionality .
Please help , any pointers regarding this ..
Thanks in Advance.

Hi ,
U need tto get the URL of the called application through method
construct_wd_url and generate the popup window for the second application with the above URL .
in ur first app , crate an event on lead selection of the table and write the following piece of code :
   DATA:
      w_url   type string,
      w_value type string.
         call method cl_wd_utilities=>construct_wd_url
        exporting
        application_name              = u2018 u2018 // here specify the name of the called application
      importing
        out_absolute_url              = w_url.
   * make the Value type compatible that has to be passed with the URL
w_value = lv_ebeln.
* Attach the parameters and its value with the URL that
* have to be passed to the 2nd application
call method cl_http_server=>append_field_url
    exporting
      name = ' '   // input parameter here
      value = w_value
    changing
      url   = w_url.
* generate a popup window for the 2nd application with the above URL
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window         TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_external_window(
                   url = w_url ).
lo_window->open( ).
Now in the doinit of ur called application , u can get the value for that particular input parameter
[code}
DATA:
lv_param type string.
lv_param = wdr_task=>client_window->get_parameter( ' u2018 ). // paramtr name
Now select the appropriate values in internal table for this and bind it to ur context node ..
I hope this helps..

Help required to get GR and IR Detaisl based on PO

HI,
I need some help in developing BAPI to get GR and IR details based on PO. Could anyhow help me out in getting this. I need to pass PO as import parameter and should get all the GR and IR values for the same. Pls send me the flow to get these details..Also the tables related in developing this..
Regards,
Ramesh

Hi,
By passing the PO number, GR details can be obtained from the following, MSEG, MKPF, PO number is found in MSEG table,
IR details can be obtained from RKPF & RSEG, you find the PO number in RSEG table,
Rgds,

Help required to get data from Cash Mgt

Hi
I need help to get following data from cash managemment .
Bank Name
Branch
Account#
Date
cheque#/Ref
Amount Direct Debited by bank
Amount Direct credeted by bank.
Kindly help
Regards

Hello.
See if this helps. When the Amount column shows a negative number it represents a Debit.
select b.bank_account_name "Bank Account" ,
bb.bank_branch_name "Branch",
b.bank_account_num "Bank Acc Num",
l.trx_date "Date",
l.trx_type "Type",
l.trx_text "Description",
l.amount "Amount"
from ce_statement_headers_all h,
ce_statement_lines l,
ap_bank_accounts_all b,
ap_bank_branches bb
where b.bank_account_id = h.bank_account_id
and l.statement_header_id = h.statement_header_id
and bb.bank_branch_id = b.bank_branch_id
and b.bank_account_id = <bank_account_id>
and h.statement_number = <'statement number'>
Octavio

Help required in Getting XML output as Required

Hi All,
I have below xml
INSERT INTO XMLTABLE VALUES (4,'<?xml version="1.0"?>
<Node_1 empID="202" empName="Pro1" oper="Update">
<Node_2 empID="20" empName="Pro2" oper="Update">
<Bode_3 empID="2" empName="Pro3" oper="Update">
<Bode_4 empID="22" empName="Pro4" oper="Update">
<Bode_5 empID="12" empName="Pro5" oper="Delete"/>
<Bode_6 empID="223" empName="Pro6" oper="Insert"/>
<Bode_7 empID="201" empName="Pro7" oper="All"/>
<Node_3 empID="21" empName="Pro71" oper="ll">
</Bode_4>
</Bode_3>
</Node_2>
</Node_1>');
I have a sequence seq_i
seq_i start with 1 increment by 1
am able to display output as below,
Node|EMPID|OPER|EMPNAME|MGRID
Node_1|202|Update|Pro1|Null
Node_2|20|Update|Pro2|Node_1
Bode_3|2|Update|Pro3|Node_2
Bode_4|22|Update|Pro4|Bode_3
Bode_5|12|Delete|Pro5|Bode_4
Bode_6|223|Insert|Pro6|Bode_4
Bode_7|201|All|Pro7|Bode_4
Node_3|21|ll|Pro71|Bode_4
Now I want below one as output
All nodes starting with Bode_, I need to replace that with sequence, seq_i
so for the seq_i (starting with i and incrementing by 1)
Please note when ever node changes to sequence, corresponding mgrid also changes,
Node|EMPID|OPER|EMPNAME|MGRID
Node_1|202|Update|Pro1|Null
Node_2|20|Update|Pro2|Node_1
1|2|Update|Pro3|Node_2
2|22|Update|Pro4|1
3|12|Delete|Pro5|2
4|223|Insert|Pro6|2
5|201|All|Pro7|2
Node_3|21|ll|Pro71|2
Please let me know your thoughts on this to acheive the same,
Thanks,

Well you've already said you can get your XML into the initial flattened hierarchy structure, so you just need to manipulate that to assign a sequence (row number) as appropriate.
Something like...
SQL> ed
Wrote file afiedt.buf
1 with t as (
2 select 'Node_1' as node, 202 as empid, 'Update' as oper, 'Pro1' as empname, Null as mgrid from dual union all
3 select 'Node_2', 20, 'Update', 'Pro2', 'Node_1' from dual union all
4 select 'Bode_3', 2, 'Update', 'Pro3', 'Node_2' from dual union all
5 select 'Bode_4', 22, 'Update', 'Pro4', 'Bode_3' from dual union all
6 select 'Bode_5', 12, 'Delete', 'Pro5', 'Bode_4' from dual union all
7 select 'Bode_6', 223, 'Insert', 'Pro6', 'Bode_4' from dual union all
8 select 'Bode_7', 201, 'All', 'Pro7', 'Bode_4' from dual union all
9 select 'Node_3', 21, 'All', 'Pro71', 'Bode_4' from dual
10 )
11 -- end of test data obtained from flattening XML - just use query below against own data
12 select rpad(' ',(level-1)*2,' ')||coalesce(bode_no, node) as tree
13        ,coalesce(bode_no, node) as node
14        ,empid
15        ,oper
16        ,empname
17        ,case when bode_no is not null then prior coalesce(bode_no, node) else mgrid end as mgrid
18 from (
19    select node
20          ,case when node like 'Bode%' then
21                     to_char(row_number() over (partition by case when node like 'Bode%' then 1 else 0 end order by node))
22                else null
23           end as bode_no
24          ,empid
25          ,oper
26          ,empname
27          ,mgrid
28    from t
29    )
30 connect by mgrid = prior node
31* start with mgrid is null
SQL> /
TREE                 NODE                                EMPID OPER   EMPNA MGRID
Node_1               Node_1                                202 Update Pro1
Node_2             Node_2                                 20 Update Pro2 Node_1
    1                1                                       2 Update Pro3 Node_2
      2              2                                      22 Update Pro4 1
        Node_3       Node_3                                 21 All    Pro71 Bode_4
        3            3                                      12 Delete Pro5 2
        4            4                                     223 Insert Pro6 2
        5            5                                     201 All    Pro7 2
8 rows selected.

Help Required to get Age of an Item at fix day of every week

Hi Friends suppose i am having following table structure
INVSTOCK
Entcode
ItemCode
Entdt
Enttype
Qty
Rate
Invitem
ItemCode
Group Name
Item Name
Where invitem.itemcode =invstock.itemcode
Now i want to create a report based on user input of month. (If i have given month as Aug)
It has to show me Closing Stock as in following format
0-30 Days 31-60 Days > 60Days
W1_Qty, W2_Qty, W3_Qty, W4_Qty W1_Qty, W2_Qty, W3_Qty, W4_Qty W1_Qty, W2_Qty, W3_Qty, W4_Qty
Division
Where
W1_qty : Quantity of Division as on first Monday
W2_qty : Quantity of Division as on Second Monday
Calculation Used to get Weekday : TO_NUMBER(TO_DATE (next_day(trunc(sysdate, 'MONTH')-1, 'Monday')+21)
Thanks in advance
Mahesh Sinha

Thanks David
In any of the above mention
In fact i am facing problem while joining in OLAP
Table
Invstock
Entcode
Entdt
Enttype
Barcode
Qty
Table
Invitem
Barcode
Division
Section
Invstock.barcode = Invitem.barcode
Now what I want is as follows
Week1
Week2
Week3
Week4
0-30 Days
30-60 Days
>60 Days Old
0-30 Days
30-60 Days
>60 Days Old
0-30 Days
30-60 Days
>60 Days Old
0-30 Days
30-60 Days
>60 Days Old
Division
I am having formula to get age and that I am getting on FIFO Basis
Now the problem Is
1. either I have to create four different queries for four weeks
2. It could be that an item which was available in First week is not available in other week so how to join?

Help required to get around iTunes problem

Does anyone know of a way of running iTunes on a windows machine where the program is not allowed to install.
The problem is that we have corporate laptops and as end users we do not have 'administrators rights' so if we run the install program it will not install.
The IT department locally have limited admin rights, and it will not allow them to install iTunes.
Therefore if anyone out there knows of a way of running iTunes without having to have it installed as a program on the PC it would be gratefully appreciated.

Hello.
See if this helps. When the Amount column shows a negative number it represents a Debit.
select b.bank_account_name "Bank Account" ,
bb.bank_branch_name "Branch",
b.bank_account_num "Bank Acc Num",
l.trx_date "Date",
l.trx_type "Type",
l.trx_text "Description",
l.amount "Amount"
from ce_statement_headers_all h,
ce_statement_lines l,
ap_bank_accounts_all b,
ap_bank_branches bb
where b.bank_account_id = h.bank_account_id
and l.statement_header_id = h.statement_header_id
and bb.bank_branch_id = b.bank_branch_id
and b.bank_account_id = <bank_account_id>
and h.statement_number = <'statement number'>
Octavio

Help required to get Talk21 e-mails via Outlook

Similar Messages

Maybe you are looking for