Help!! Seriously Frustrating Mouse Problem!!

I can't seem to figure out where the problem lies. It must be the computer or OS because I've tried different mouses and the same thing is happening:
Clicking the mouse seems to keep registering as 2 clicks! Its as if it is registering the release of the click as a second click because if I'm real careful and click and release slowly it doesn't happen. As I said, it happens no matter what mouse I plug in. I tried changing the mouse preferences and buying a new mouse pad which seemed to work for a while, but now its happening all over again for no reason.
Any ideas? Its pretty weird.

Were the different mice the same brand and model?
Try playing around with only the mouse and keyboard attached (disconnect all other USB peripherals) and with the mouse attached through the keyboard and directly to the eMac. If the mouse begins to behave normally, add USB peripherals back one at a time, checking to see if the problem recurs, in which case you can either replace or isolate (using a self-powered USB hub) the offending device.
If you create a new administrative user account (use it only for troubleshooting to avoid changing default preferences as little as possible), does the mouse problem appear in that account as well?
In your normal account, did you try moving the old preferences file to the desktop or trash to force creation of a new .plist file, then make your settings changes? (I think you want the Library> Preferences> com.apple.desktop.plist file for the mouse settings.)
If either the troubleshooting account or the new prefs file tests work, you can use Preferential Treatment to check your preferences files.
Did you install manufacturer's mouse software with any of the mice you've tried? This is one of those "whatever you've tried, try the opposite" things --- if System Preferences> Other shows any mouse-related extensions (e.g., Control Center), try removing that and restarting. Conversely, if you never installed anything from the mouse manufacturer (and for generic three-button scrollwheel mouse support under OS X you don't need to install anything), see if adding the latest software from the maouse manufacturer's website helps.

Similar Messages

Serious and Sudden Problem with Z10 NEED HELP PLEASE

I have a z10, one of the first that came out in Toronto (if it makes a
difference), a couple of hours ago I came across a serious and sudden
problem.
I was able to swipe left and right between pages of apps, even drop down
from the top, but I cannot open anything, not even make a call or settings
options.
Any time I try to, for a split second it looks like its about to load
something then nothing. (image slides to the right quickly and goes back on
every attempt)
So I first did a reset, same problem, then I did a battery pull (about 15 minutes) and problem presisted.
I tried through USB to do a backup on blackberry manager and perhaps do a
re-install of everything, however when I was prompted for the password of
my device on my PC it kept telling me it was an incorrect password (I use
this blackberry on my computer 4-7 days a week, twice a day sometimes for a
year and I have never miss typed my password nor have i changed it)
After trying everything to make sure the first letter maybe was upper/lower
case, even my other possible phone password, nothing worked..
On the 5th failed attempt my phone prompted me to type 'blackberry', which
i did, then i typed my password on my phone which i type in about 15 times
a day becuase I set my phone to a 5 minute lock and still said it was incorrect.... I am no on 9/10 attempts and lost
for options.
Please if anyone can give me any suggestions, or even how to backup my phone
and whipe it now, or I have an earlier backup form 4 months ago that I
wouldnt mind going back to in worst case scenario.
Thank you for your help in advance,
Solved!
Go to Solution.

Sorry, no I haven't experienced that. It could be from an app you downloaded but that's just a guess. Wiping the device will tell us a lot. If the device still doesn't work you'll want to reload the OS using BB Link. if it still doesn't work after that then warranty support will be necessary through Rogers.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

HT5622 hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem!

hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem! and in the billing info there is pop-up box saying i have accessed my account from didfferent computer but no i have been doing it from the same pc. please help me out.

Tap Settings > General > International. Make sure the Region Format is correct.
As for your Apple ID. Tap Settings > Store > Apple ID > iForgot
Resetting your Apple ID may help.
Congrats on your new iPad !!!

My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!

My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!

Go step by step and test.
1. Restart
2. Shut down the computer.
    Clean the trackpad with moist not wet microfiber cloth.
    System Preferences > Point & Click
    Try turning off three finger dragging and then turning it on after testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
4. Reset PRAM:   http://support.apple.com/kb/PH14222
5. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
    Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select Macintosh HD, then First Aid.
    Click Repair Disk Permissions button.
    Ignore the time remaining estimate.
    Last 1 minute may take longer.

[SOLVED] Frustrating mouse behaviour

Hey guys
I'm having a problem with my mouse interactions on my desktop. I'm running 64-bit arch with Openbox, tint2, cairo-compmgr, gmrun and conky.
I can consistently reproduce the following problem:
Fire up Chromium, and open two tabs with web pages. Click on one of the tabs (to switch tabs), and move the mouse down into the body of the webpage. The cursor no longer responds to changes in the context (ie it never switches from cursor to hand for links, or the text selection tool for text), and left-clicking or middle-clicking is totally fruitless (ie nothing happens). If I use the scroll wheel in this state, then chromium scrolls through the list of available tabs instead of the web page (remember, my cursor is off the tab bar and in the page at this time) To get "back" my cursor, I have to right-click somewhere in the web page and then cursor control resumes as normal.
Other programs show even worse behaviour, for example tintwizard. If I try to select the font for tint2 (using the wizard), I can't use the mouse to interact with the font dialog (separate window) at all - I have to use the escape key to cancel the dialog.
The programs listed aren't the only ones showing problems, they're just the ones I can report a consistent problem for. Others are so frustrating I can't even begin to describe what's going on (aside from "my mouse is driving me insane")
This problem was vexing me on my previous setup (fluxbox), which is why I "burned down" my system (complete uninstall of X11 and all graphical systems) and then rebuilt it, but the problem has followed me apparently.
I've checked over my Xorg.0.log file and there's no errors or warnings related to my mouse or input devices. My mouse for fluxbox was an MX1000, I'm now using a Saitek RAT7 for openbox and the problem is persisting, so I think this isn't a hardware issue.
Could someone help me out with this one? Without any error messages or leads to follow up on, I think my only way out at this time might be a complete reinstall of my OS.
Woogie
Last edited by woogie (2010-10-26 00:05:40)

Weird problem. Some ideas:
- Did it start after some update or change? if so use the pacman logs to determine which update was the culprit and downgrade it
- Do you use any custom xorg settings, or some custom HAL policies in /etc/hal/fdi/policy/ (depreciated btw)? Try setting it all to default
- Comb through the other logs with my error combing script
- Perhaps helping in isolating the problem is the 'xev' commandline app. With this you can check if (and which) keyboard/mouse events are are registered.
- Does it also occur with a fresh home folder, I.e. is it caused by some setting in your homefolder?
Last edited by rwd (2010-10-25 20:16:48)

HT4972 the apps weve downloaded are not working. please help, extremely frustrated with our ipod 4

the apps we have downloaded are not working, please help, extremely frustrated with our ipod 4

See my previous reply for for the apps closing.
For the wifi problem:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect OK before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

In order to help me solve my problem

Hello
I'm Lana Zwain ...
I would like to help me ...
Sent several requests to you to help me change the secret questions for my account
But I was not getting any email you sent nonsmoker message in order to change my password for my account your not getting any message in this regard
I hope to help me as soon as possible
Please help me solve my problem as soon as ...
With thanks
<Personal Information Edited by Host>

Hello
I'm trying for several days to recover security questions for my account iTunes
And the country in which it was held not exist among the countries mentioned
I hope to help the serious and rapid restoration of confidential Questions
Thank you

I have a serious contacts redundancy problem. First I have multiple email account formats, e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contact

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

Z10 not working at all please help in solving this problem

Z10 has been stuck in "Preparing Blackberry HUB" mode for hours despite several restarts and battery pulls. Five swipe solution to restarting HUB only results in screen flashing on and off. Frustrated. Any ideas appreciated. Phone calls too not working, cant receive email, text messages or launch applications although preview screen seems to be working.
Have reviewed other threads for solution with no success. Would rather not use security wipe option.
Please help in sloving this problem

I would start with a Security Wipe:
To perform a Security Wipe please follow the instructions below. Be sure and use BB Link to make a full backup before proceeding with the wipe:
http://www.blackberry.com/btsc/KB33591
Once the wipe is complete you can restore your backup. Keep in mind that data in the backup may be the source of the original problem and restoring it may restore the problem, as well. To alleviate this I recommend not restoring the Settings portion of the backup.
If that doesn't work then use an autoloader to reload the OS:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

Keyboard & Mighty Mouse problems

Hi all,
I am using the new style keyboard with my MBP and for some reason I keep losing the bluetooth connection & the message " keyboard connection lost " the keyboard is next to my MBP so I cannot understand why I am getting this message ? Also when I receive this message my Mighty Mouse seems to move across the screen very slow ?
If anyone has a clue why this is happening and could give me some help in solving this problem I would be very great full.
Thanks Clinton

Edit: You may want to ignore the below. I just realized it was pertaining to the Mac Pro, and not the MBP...
Try reading through this thread and see if it helps:
http://discussions.apple.com/thread.jspa?threadID=633522&tstart=0
In a nutshell, it could be a Bluetooth-related wiring problem. Some people have gone and fixed the problem by opening up their machines and following the instructions here:
http://www.thelocale.org/files/howtos/mac-pro-bluetooth-howto.pdf
Since tampering with the innards of your computer will probably void your warranty, I would suggest that you NOT do this yourself unless you have to. If you're still under warranty, perhaps you could go to an Apple Store to get it looked at, showing them the above to sort of nudge them in the right direction...
Message was edited by: roguemodron

Mouse problems with v10.7 Lion and VMWare Fusion 3.1.3; reboot of Lion temporarily fixes it

Since installing Lion, my VMWare Fusion 3.1.3 Windows 7 and XP virtual machines have very strange mouse problems. I thought it might have been caused by 3rd party software on my iMac (Mouse Zoom), because it seemed to work after removing the software, but I have now discovered that it is actually the reboot of OS X v10.7 (and now v10.7.1) that temporarity removes the problem. However, after a while the problem comes back, requiring another reboot of Lion.
The problem is strange behavior of mouse button clicks inside the virtual machine, e.g. unable to double click on a folder or program in Windows because it jumps back to the higher folder tree, as if I had hit the ESC key. In addition to my USB and BlueTooth mice, the Mac touchpad also has the problem. I have confirmed that the problem is probably in how VMWare maps the iMac human interface devices (HIDs) to the virtual mouse inside the VM, because I am able to get correct mouse function by attaching one of my mice directly to the Virtual Machine (there is an edit to the VMX file that enables HID devices).
I have deleted and reinstalled VMWare Fusion 3.1.3 per suggestions on the VMWare support site and/or various forums, but that did not help.

According to: http://roaringapps.com/app:61 Version 3.1.3 has issues with Lion. There is a 2011 beta that works better.

My PS/2 mouse problem :(

for some time now i boot up the computer and every other time the mouse works, i now use a usb keyboard and before when i had a ps2 keyboard it was that that wouldnt work, sometimes the mouse wouldnt work and when i restarted with pressing Ctrl+Alt+Delete twice and tabbed to the shutdown in the box that came up when it was time for windows to let me log in my keyboard wouldnt work and i had to use the mouse to restart, eventually the mouse and keyboard would work together after a few restarts using this method.
well now i have a usb keyboard and it works all the time so the mouse now works every other boot or reboot, i am guessing maybe i should of gotten a usb mouse along with the keyboard but the keyboards that came with mice together were kind of ugly and small so i got the Gigaware usb keyboard, plus four of the five usb slots in the back of my computer are currently being used(one for this keyboard, one for my gigaware headphones, one for my webcam, and one for my printer) the only one empty is the one connected to the D-link Bracket thing that has the four lights that light up a certain pattern to tell you if any problems, i had my ipod shuffle hooked up to it once recently and when i opened or restarted my computer nothing would load up, really not sure why so i dont leave the ipod shuffle connected to my computer, just that time to test it because i just got it not too long ago, been trying to resolve my computer issues so no time to do anything with it lol
so back to the main issue....my mouse works but every time i restart it doesnt or if i start up my computer it doesnt work and then when i restart it then it works. I have searched for the passed month with google looking for similar issues with this mouse problem and i have seen a few people with the same problem but no solution, i personally will be getting in more detail than any of these people have been in those forums i have visited.
so i have tried a few different things to try and correct this problem and none have worked so far. I have looked in the BIOS for any setting related to the mouse and have found nothing, i have uninstalled the mouse in Device Manager and restarted my computer still with the mouse being detected and sometimes not until reboot
the last thing i did was most interesting to me, i had my computer shut down and thought to try and see what happens if i have no mouse physically installed so i unplugged it and turned on my computer and when the screen came up for me to log into windows there was the pointer in the middle of the screen just the same as the times my mouse would be frozen and i need to restart to make it work.
now further into my observatory skills hehe i happened to eventually get really curious at the boot up screen after the detecting of my drives and before the microsoft windows logo and i got more near to what i think is causing this mouse issue yet i dont know how to correct it, i pressed Pause/Break to read what was there because it was to fast to read in the first place and i finally notice it is PCI listing devices and there is a list of devices and IRQs that each one is using, before all that though i noticed in my readings that the mouse IRQ was 12 always and this part of the screen that i saw really confused me was that after many tests i noticed that each time the mouse didnt work i had seen when i froze the screen to read that IRQ 12 was being used by SMBus Cntrlr and also Multimedia device and when i restarted then those two were using IRQ 11 and my mouse worked
this was really strange and i do believe that this is part of the source of my mouse not working, i am stuck and have been for some time now on this and i dont know what i need to do from here, i was also thinking maybe i need a new power supply because sometimes when i first start up my computer i can tell my processor fan struggles to spin a little even after it is clean and i do clean out dust on a regular basis, but i dont know about the power supply thing, its just a guess because i think it may be pushing out as much juice as it can to power up all four of my usb connections, my processor, my fan, my video card, and my mouse which has that frozen in the middle of the screen problem when i boot up my computer before i can log into my windows account
also i am more moving away from my power supply hypothesis because i can leave my computer open for a long period of time and my mouse never freezes up, i really need some help with this, thank you for the time spent in reading all this and any help i may be offered to correcting this issue, i have a couple more questions but they are not related to this issue so i will submit this one and send my other questions in a different message, thank you again

ok first of all i would like to thank all those who have read and given input and helped me with everything, thank you all so much
second is the story i have left out from the start of my blue screen of death problem and what it may have to do with the RAM.......
two days ago i started to put together my motherboard in my new case and new RAM and power supply, first i started with the motherboard transfer, i unscrewed it all fine and put inside the new case, but before i had it laying on my bed while i prepared the screws inside the new case, i put in my cd drive and hard drive, then i installed the power supply and connected everything, when it got to the RAM i took out the one 512 and the 256 and left the other 512 as it was and if you know about the K7N2-L motherboard then you know that two RAM slots are side by side and one is a little further off, well the one that was a little further off had the 512 so i put the 2x1Gb Patriots in the slots that were together
then i started installing more of the power connectors from the power supply and i noticed on my bed one little piece and had no idea where it came from, i started looking and thinking where have i seen a similar piece before and then saw that it was a RAM clip and how it came of the slot eludes me even to this moment, i didnt think it a big deal so i took the 512 out of the slot it was in and put the 1gb in its place and the 512 in the middle of the two 1gb chips, so one 1gb and the 512 were in the slots side by side and the other 1gb chip was in the slot further away from the other two and that was the one with the broken clip, yet it ran through the memory tests and even showed up in Sandra but i am thinking now that maybe it is the reason why i have gotten 26 blue screens of death since yesterday when i first started up my system
so now i removed the 512 and put in its place the 1gb from the broken clip slot and i started it all up and went in bios and see the timing are automatically set at 2.0-3-2-5 and so i also set the frequency voltage at 2.7V just as a test and so far since i have been typing this message i see no blue screen
the broken clip slot is broken at the clip but i had it in there and when the chips was installed i tugged a little to make sure it was being held in there and the fact the memory showed up on my system lets me know that it registered but i think that because they are two different types of RAM they may not have been compatible so i was getting the blue screens, the patriots are stock timed at 2.0-3-2-5 @ 2.7V and the Corsair is 2.5-3-3-8 @ 2.5V but then i think again it is because of the broken clip slot now because before when my system had the two 512 and the one 256 chips and no broken slot clips and i had the voltage set at 2.6 and also 2.7 with no BSOD issues............
so now here i am Single Channel Ram with timings of 2.0-3-2-5 at 2.7V and no blue screen so far but that extra 512 would have been nice but oh well i guess, maybe 750 mb more RAM than i had before is not so bad.......but i am power hungry just as are the rest of you when it comes to the computer system
i wish i had one more 1bg patriot chip to test my theory but then again if it didnt work i will have an extra chip to look at which will make me go
well i guess that is it for now, it is just a time issue now to see how this 2gb works out for me, but i want 2.5 gb
my next project is new motherboard and new processor and new ddr2 or ddr3 RAM but by the time i need that upgrade ddr5 or 6 may be in use i hope in that time the prices are good and for some reason AMD gets my attention more than intel, i dont know why
well ok i have been typing this for quite some time now and no blue screen so this is good news, i guess the question now is do you think the problem was due to the broken RAM slot clip or because the Corsair RAM was timed to run at 2.5-3-3-8 at 2.5V and the Patriots' are timed at 2.0-3-2-5 at 2.7V and together they are just not compatible?
thanks again for everything

I need help with a browser problem

I am was given a new iMac G3 (from 2001) which was really never used.I have not yet had any serious problems with it, but really could use some help with a browser problem.
I have 4 different web browsers that needs the macro media flash player update. The browsers I use are internet explorer, iCab, Netscape, and the original Mozilla Firefox.
It would be of great appreciation for the readers of this post to answer my question.
I am also having the problem with installing the plug - ins for the browsers. Thank You For Taking the Time To read This!

Hi, rynodino -
As Tom has suggested, plugins need to be installed in the Plug-Ins folder for the browser.
Typically each browser will have its own Plug-Ins folder, usually located in the same folder containing the browser itself. In order for each of several browsers to access the same plugins, the plugins must be replicated and placed in each of the Plug-Ins folders for each of the browsers. The easy way to do that is to hold down the Option key while dragging a plugin to the new location - a copy (not an alias) of the plugin will be generated at the location it is dragged to.
Most plugins will display a Netscape icon regardless of where they are located - this is normal.
It is not unusual for the installer for a plugin to default its install to the Plug-Ins folder for Internet Explorer. So be it. Just replicate the new plugin to the other Plug-Ins folders as needed.
Note that some plugin installs will involve more than one item. For those, be sure to replicate all items for it. Using labels can help identify what is new, what has been most recently added, in a Plug-Ins folder.

Nightmare Mouse Problem

OK, this one is baffling me and has become a nightmare.
Since this past weekend I have had a mouse problem that I cannot resolve on my own and no matter what I've tried, nothing has resolved the issue.
When using the mouse, it is not responding to mouse clicks. Moving a window takes repeated tries and does not move to where I want it to go. Most times, trying to move a window minimizes it to the dock. Clicking on items takes multiple attempts to select them or highlight them. Highlighting text is near impossible to do accurately, as is relocating the cursor. Selecting items on the desktop is hit or miss and sometimes the items will launch without double-clicking them.
I also have a Wacom tablet and this device works perfectly, although I have dual displays and it only is mapped to one display.
Things I've tried:
Since I am on a dual-bootable (2 drives/2 OS's) Mac and have dual user accounts on each drive, I've tried using each user account on each startup disk. The mouse behaves exactly the same way on all of them.
Tried using a different mouse.
Removed the tablet from its powered USB port on the rear of the Mac and tried the mouse in that port. This improved the ability to select an item on the desktop but in doing so, the item launches with one click.
Checked System Preferences/mouse settings and they have not changed.
Verified and repaired permissions using the OS 10.4 installer CD.
Scoured the Net for info as to why no mouse is working but a Wacom Tablet would be in the same port.
The mouse was originally connected to the right side of my keyboard. Tried the left side port, as well as the powered USB port on the back of the Mac where the tablet was connected as mentioned above - and I also tried the other powered USB port.
I'm at a loss now as to what to do.
Can somebody please help?
THANKS

I've got a Logitech two button scrollweel mouse.
Contact Logitech tech support and check their website to see if you need to update the mouse drivers http://www.fixya.com/support/logitech
Or post in their forums http://forums.logitech.com/logitech/

Help!! Seriously Frustrating Mouse Problem!!

Similar Messages

Maybe you are looking for