Help, T420s display/video card issue!

Hi, all. I would appreciate for any input.
Recently it happened a lot with my T420s especially when I was on full-screen video playback. The screen suddenly became like the image I attach below and there was no response at all. Then after 30 seconds or so, the system would shut down. I suspect it a over-heat problem with my video card. BTW, the fan in my T420s is also running like crazy all the time, I have put up with this ever since I got my laptop
My last laptop was T61. With all the Nvidia video card problem before, I am so afraid this would hit me again. Should I return the laptop immediately to Lenovo. I am writing my thesis right now with this computer. Really cannot afford not having my computer for some time.
Solved!
Go to Solution.

rpitiger wrote:
Should I return the laptop immediately to Lenovo? I am writing my thesis right now with this computer.
Did the machine ship less than 21 days ago? If yes, yes to the question above. At least that is what would do.

Similar Messages

Two video cards issue

Any fix for the "Hardware cannot render at the requested size and depth" when having two video cards issue?

Now, the strange thing is: after a few initial issues one of the macs is doing fine. The second one, on the contrary, is a nightmare. Finalcut gives a green screen of death and hangs up suddenly while performing simple operations (like dropping a clip on the timeline).
I'm thinking of trying to replace the two video cards with an older single dual display card, and giving up the fancy lcd monitors (that i bought at vast cost), at least until apple issues an upgrade that adresses the two video card problem. <
If the machines are mechanically equal, it's obviously not the cards. Although you can only be absolutely certain if you swap the cards between machines and see if the green screen issue follows one or both cards.
However, that new LCD display and card combination doesn't have much time in the pipeline so there could be other issues and you're doing the beta testing for all of us. Blaming the reseller is pointless; no one can keep track of all of these issues. We only find out about them only because of reported failures.
You should research the "green screen" here on the forum. I do not recall if there are display or graphics cards issues associated with it. That seems unlikely. IIRC, it appears to be a QT issue.
bogiesan

Video Card issues in WinXP - Left 4 Dead

Just wanted to see if anyone was having issues like I'm seeing in these two pics.
This first pics shows what appear to be polygon regions appearing out of no where.
http://i44.tinypic.com/2v146ep.jpg
And this 2nd pic shows spikes that appear mostly out of characters but on some objects as well.
http://i44.tinypic.com/vqhafk.jpg
Usually when I start playing everything is fine but after a 20min or so they will start to appear. Changing some video settings in the game (such as anti-aliasing or resolution) will usually make them disappear for a few minutes but they will then re-appear. My best guess is that this is due to the video card overheating as it doesn't happen right away, but that's just a guess. I tried installing 'speedfan' to increase the fan speed but it does not seem able to control the speed on the video card.
Also, I only have the drivers that have come with the bootcamp installation. On the forums it seems that it is recommended not to install other versions of the drivers so I have not at this point.
I'm running bootcamp (windows xp 32bit) on my MacPro 10.5.5 / 4GB ram (quad core Xenon) with the ATI-X1900. I have the latest 2.1 bootcamp installed. The game runs perfectly beyond these issues, although I do get the occasional stutter or audio repeat.
I don't have any of these issues on TF2.
Does anyone have any suggestions on a possible solution? or does anyone know of a way to control the fan speeds in Windows? In OSX I use smcFanControl to keep the machine a little cooler.
PS. I also heard that some of the ATI-X1900 cards had issues. Can anyone confirm this? If this is the case, can anyone recommend another card for my MacPro? I do occasionally get video card issues in OSX too while doing 3d work.
Thanks for any help!
Message was edited by: JeffrySG
Message was edited by: JeffrySG

Upon inspection of the card it is totally loaded with dust. I found this article:
http://macsaregreat.com/?p=63
which has some pics and this thread:
http://discussions.apple.com/thread.jspa?threadID=1265166&start=0&tstart=0
which discusses many issues as well with the X1900 and Leopard. I first started seeing issues with the card during my 3d work after I installed Leopard.
I'm off to the computer store to pick up some compressed air to try to clean that vent now. I already use smcFanControl already, before using it I was getting card errors every day.
Thanks again for the info regarding the dust on that card.
Jeff

Video Card Issue? Seems atypical.

2012 Macbook Pro 15" Mountain Lion Bootcamp Win 7 Pro. While idle in Windows, screen went to gray and fans went high gear. Goes to gray on reboot after Windows startup logo. Goes to gray after initial spinning wheel on Mac side. In Mac Safemode, after the loading of the progress bar, the screen cycles through about 3 seconds of fast moving lines and distortion then goes to a gray screen with hard to see verticle pinkish lines. BUT the computer still boots into Windows safemode with Networking and works fine, so this does not seem to be the dreaded 2012 video card issue. Am stumped!

Welcome to the forum!
What machine and OS are we discussing here to begin with?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Help! Video card issues- Slow during games

Hey everyone, so heres my problem. I just got a brand new mbp 13" with 4 gigs ram with the new battery and everything. I have the game monkey island and spore on my mac. I also have windows xp installed on the other partition of my hard drive. I just need windows for one piece of software I use that I accidentally bought for my pc that died so now I'm stuck running it on my mac in windows. I also have modern warfare 2 on the windows side. Up until a couple days ago all the games were running really great, however yesterday something popped up on my windows saying something about malware (ughhh) and then call of duty on the windows side was running completely sluggish and when I restarted the computer in mac and tried to run spore or monkey island both of them are running slow too. What is weird is that it is only sluggish when running these games, never when watching movies or anything else that requires a video card. Could I have got a virus thats also affecting my mac os. Could this be a hardware issue? I'm just not sure. Would appreciate any help

If you got a virus on your Windows partition, that in itself wouldn't affect Mac OS X partition directly. If you have a Windows partition you should take all the usual Windows related measures to ensure your system is protected against Virus/ Trojans/ Malware etc by installing Anti Virus software.
Have you reset your PRAM (and/or Permissions)? Did this have any effect?
Since your MBP is so new, if a PRAM (& permissions) reset didn't help, I'd make an appointment to see a Genius at your local Apple Store and get them to check your MacBook Pro over.

My 27" imac won't boot in normal mode. The screen stays white. I have upgraded to Yosemite. However, the computer does boot in safe mode. Could this be a virus related issue or possibly a video card issue?

My 27" iMac will not boot in normal mode. The screen stays white. The computer will boot in safe mode. Could this be virus related or is it possibly an issue with my video card. Before this happened, my computer screen was flashing weird things and the computer would unexpectedly power down.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Video card issue

I am currently running Photoshop CS5 and my video card is an ATI Radeon HD5400, when I open Photoshop and check the prefrences I see the graphics card listed and Enable OpenGL Drawing is ticked. However as soon as I open an image or new document, and check the prefrences (performance) the GPU settings are greyed out, I have downloaded the latest drivers for the card (as at 13 December 2011). Prior to opening the initial image I have gone to the advanced settings in the GPU settings and changed to basic, this had no effect!, everything works fine in PS except the GPU functions, any help wopuld be much appreciated.

Hm, I got mixed results.
Catalyst 11.12 seems to support OpenGL okay for Photoshop on my video card, and my own apps seem to work fine with it.
But...
I did manage to get Photoshop to drop out of OpenGL mode during editing under some conditions... The checkbox was still checked in the Edit - Preferences - Performance dialog, but the display of the open document actually reverted to GDI operation. What I normally do to test is select the Zoom Tool and click and hold the left mouse button. If the screen zooms in smoothly, OpenGL is active.
Thing is, in EVERY case where I could reproduce this behavior, I opened an image through Camera Raw.
In EVERY case where I DIDN'T open an image through Camera Raw (even the very SAME image I had opened before, which I had also saved as a PSD), I could NOT get Photoshop to drop out of OpenGL.
Having updated Camera Raw to 6.6 just yesterday, and for that matter having taken about a dozen Windows Updates, as well as updating the ATI Catalyst drivers to 11.12, things may be a bit muddled. Plus, I'm not sure whether going through these same gyrations might have done the same thing before.
More testing is needed.
-Noel

X58 PRO won't boot (memory or video card issue???)

Hi all,
this is my first message here.
I have recently bought a X58 PRO motherboard to which I have connected the following devices: one HD, one DVD, the CPU (i7 950), one Video Card (GeForce 6600 pci-express) and three DDR3 modules from Corsair (named CMT6GX3M3A2000C8). According to Corsair website the modules CMT6GX3M3A2000C8 run on thie X58 PRO.
I have turned on the system, but the screen remains black and the motherboard issues an intermittent buzz sound.
Besides:
The led close to the pci-express (where the video card is connected) is on.
The 5 CPU leds are all turned on.
The led close to the memory socket is off.
As far as I know, usually the intermittent buzz means that the motherboard doesn't recognize either the RAM or the video card, but I don't know if the buzz is different case by case (can be buzz be different according to the issue?) and in the manual I didn't find a troubleshotting chapter.
Is there a way which allow me to better identify where the issue would be (in memory or in Video Card... or something else)?
I have not tested neither the memory nor the video card on another system, thus I don't know if one of them is faulty.
Can anyone please help me?
many thanks in advance!
Lorenzo

Quote from: Bernhard on 27-April-11, 16:06:04
Do a CMOS clear>>Clear CMOS Guide<<
Only insert one mem module. Check all your power connections to the board/s again that they are secure. You may want to reseat your CPU and check carefully that all the contact pads on the CPU do have imprints.
Ok, I'll try it this evening!
In the meanwhile, I thank you.

Need help on MS8808 video card

I have a Vanta / TNT2M64 video card (MS8808 Ver 1A) purchased from Techtronics here in western Canada. I accidentally shorted the card against my metal computer case while re-installing the card ..and now its dead. I put the old video card back in my computer, so I know the computer is still working fine, so I apparently caused an electrical problem on the MS8808 card. Can anyone suggest which component I may have fried, and if it can be replaced? Does anyone have a detailed component schematic for this card ..one that lists the details of each component? Thanks in advance for any help!!

Im running Hybrid SLI (Geforce Boost) on my Acer Aspire X1200 SFF with a Geforce 8200 (integrated) and a Geforce 8400 GS (add in) and notice no instability issues. (230 watt psu)
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Please help in selecting video card

I have an older 500 MHZ (single cpu) G4. I just bought a 23" Apple display. I use the comp. for graphics applications (photoshop, illustrator, etc)
The video card I have in the G4 currently is an ATI Rage 128 Pro. I need to upgrade for the new monitor. I need an AGP card with at least 128 MB and a DVI connection for the new Apple display.
Also, right out of the box, the display does not work. I had it all hooked up and plugged in and the display never turns on. The LED light doesnt even light up. Is this a bad transformer or a video card problem.
I am sending the display back.
Please help me pick out the correct video card. All of the ones I have seen are either for the G5 or not for certain generation G4. I will be upgrading to G5 sometime next year but I have to work with this one for now.
Thanks for your help.
Paul

Quote from: BONBON3 on 08-November-07, 17:34:10
i dont connect the card yet because i am afraid to shourt the circus...
nope such materials are not electric condictives

Issues with games, video card issue?

Hi,
I have been having issues with games lately. Mostly they are hidden object games from Big Fish, but they start up then minimize, it doesn't crash completely just minimizes, I click on it again and it works for a few seconds and minimizes itself again and again. I am unable to play the games because it keeps minimizing. could this be an issue with my video card? I have attempted updating it but it doesn't seem to help. Any ideas?

Ok OK, Update...
the games work perfectly on my father's HP which runs windows 7...so it definatly is NOT because of not updated stuff....I really dont know what else to do at this point....no suggestions from anyone?!?!?!

Help - Need OpenGL Video Card for G4 with ADC

OK, I've got a G4 with 1.8 GHz Dual Processors. I just upgraded from FCP 5.1 to FCP 6.0 and it tells me that FCP 6.0 doesn't like my video card because it "doesn't support OpenGL." So I need a new video card - problem is, my G4 Quicksilver utilizes an Apple Flat Screen with ADC connector. I really like the Studio Display and don't want to change it. Does anyone know of a video card with "OpenGL" (that will work with FCP 6.0) that also has a ADC connector????
Thanks, Gilbert

As far as I'm aware, the Radeon 9000 is ATI's most powerful card with an ADC connector and the GeForce4 Titanium is nVidia's, although I don't think either supports Tiger's Core Image etc.
The following utility can monitor VRAM usage, which may help decide whether the 128MB version of the 9000 would be noticeably better:
http://www.macupdate.com/info.php/id/15566

Video Card Issues

Hello.
I am bit of a newbie at this PC building game and I am having some issues I was hoping you could help out with.
I am running:
AMD 3500+
MSI K8N Neo Platinum/SLI
ATI x600 All in Wonder (PCI-Express)
1 GB DDR Dual Channel RAM
Window XP SP2
Initially, Windows would boot fine, but when I attempted to run a DVD or a game (BF 1942), the video card would choke and the PC would reboot. I realized I didn't have enough power from my PS, so I upgraded.
Things are much better now, however, after a certain amount of time running, I get either a matrix style green pattern interlaced in DVD or a purple checkerboard pattern in my game. Everything still runs OK, so I am assuming I just don't have a setting right somewhere.
I have the latest listed BIOS from MSI (Dec 2004). I am running the Catalyst 5.3 drivers from ATI.
Does anyone have any suggested video card setting to try? BIOS settings? Could it be temperature?
Thanks in advance for your help.

Thanks for the replies, I will answer as many as I can now and hopefully more later.
Power Supply - Rosewill AP600X
12V-35A
5V - 50A
3.3V - 30A
I am not overclocking and I installed the Catalyst 5.3 first, so I didn't do a driver clean.
I will try to check my temps although I believe I have ample ventilation.
I will try the AA and AF settings. Any suggestion on a screen resolution?
Thanks for the help!

IMac Display/Video card "error"

Hey ppl, just had the most random thing happen to my new iMac Core Duo 20" today. ive had it for under a month, and its the standard model from Apple. I had a few Apps open, and was using VLC to play a video file.... suddenly, the entire display goes washed out(very bright white/yellow) with a few colored bands going from top to bottom. I could hear the audio from the video playing...but i couldnt make the display get back to normal (force quit, etc). So i had to do a manual reboot of the system and all was fine.
Anyoneelse here experience anything like this ? or anyone here know why something like this would happen ?
Cheers

this could be caused by any number of things. i would reset the pram holding apple-option-p-r and that might help. but i would also run the apple hardware test. you can do that by booting to your install disk holding the d key. could be the logic board. but could also be inverter, or video card. it could even be software related. i would definitely run apple hardware test though and see if everything checks out. [ 8 ) ]

Horizontal lines on imac display, video card going bad?

I have horizontal lines and a triangular shaped artifact on my 24 inch Imac display. This happens after quite awhile of use, so I am thinking it might be the video card is about to go. Also, have issues with viewing flash videos, the browser (safari) will just quit responding, sometimes it will recover. Most times I have to reboot the machine. I believe all these syptoms are related. Any ideas?

Welcome to the Apple Support Communities
Your graphic card is damaged. Unfortunately, the only thing you can do is to take the Mac to an Apple Store or reseller to get the computer repaired.
Both problems may be related, because Flash uses the graphic card and it often fails

Help, T420s display/video card issue!

Similar Messages

Maybe you are looking for