Help Troubleshooting Flya Kite Integrated Case

A student of mine is having problems completing Assignment 2 Flya Kite Integrated Case. She has very detailed screen shots and explanation in a Word document, but, I see no way to attach it. In summary, here is what is happening:
In the Create Raw Material (Initial Screen) student enters Wood012 in the material field to before selecting viewsu2026 If she leaves it blank, a randomly assigned number appears in the material field with no authority to change itu2026
She then selects the Organizational Level Views, FKPT. After selecting the views, she tries to start over and create Wood012. She gets the error that material already maintained.
When she accesses Wood012 through the Change Material Option, she can go through all the views and the data she entered is there. However, when she tries to search, leaving the search value blank to view a list of all materials, Wood012 is not there in the list.
Any ideas as to what might be wrong?

Dear Lisa,
does the student search for the material number or material description?!
When entering transaction mm03 or mm02 and searching for a material, students often use the search field for material number but enter the material description (which can be completely different from the material number). and if the description differs from the number they won't get any results back. So please make sure the student uses the material number when the number is needed and uses the description when the description is needed.
HTH.
Regards
André

Similar Messages

Trouble-shooting Flya Kite: Instructor Exercises

I am encountering several problems with this case and can't seem to get help for resolution. My semester began 2 weeks ago. I punted on giving the quizzes because I couldn't get them in BB format, now, in following instructions for Instructor Exercises in Instructor Text that must be completed to prepare for student exercises, I am unable to complete them. Specifically,
For transaction code KB31N, There is no StatKFig with value of SQFT in the list. It is FKSQFT instead. I selected this option and hope it is correct.
Also, for Transaction Code KP26, there is no Cost Center group MFGFK. Getting an error here too as well. Couldn't figure this one out.
Would appreciate help from anyone who might have an answer to this.
Thank you for your help.

Heather,
Using the Integrated case. Problems are in the Instructor Exercises. Am just trying to set up the steps Instructor was required to do before students can begin work.
So, refer to the Instructor Text for Flya Kite Fully Integrated. Problems I've detailed are on pages 16 and 17 of that manual.
Also, am using Client 205 set up by Gino for us to use this semester.
Thanks for your help.
Lisa

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and geong straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and going straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Firefox crashes when I click help troubleshoot information, and it's not sending crash reports.

Firefox crashes when I click help > troubleshoot information. It's also not sending crash reports. I really can't be any more specific or straightforward than I am being right now. I have reinstalled multiple times. I've tried the same thing in safe mode. Cache and history and cookies are cleared. Hardware Acceleration is disabled. All of it.

Computer's clean, and this is my second clean uninstall and re-install of Firefox tonight.
I'm not having this problem with Chrome.

I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?

I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?

Please post your problem in the Final Cut Studio (Final Cut Pro 7) forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
You'll get the help you need in that forum.

Anyone help to provide some use cases of Oracle Cloud Computing?

Hi.
Anyone help to provide some use cases of Oracle Cloud Computing?
PaaS is preferred.
Thanks.

- small companies can deploy Oracle server as and when needed. Unlike hosting provider, you are paying for resources when you use
- Vendors can demo their database applications from anywhere without requiring hardware
- big companies can provision capacity on-demand (e.g. holiday season)
These are only few use cases, others might have more.

ISH-CO Integration (Case based order could not be created)

HI,
My name is Yael Jacobi; I am a CO implementer in SAP Project in Israel.
The project is for a hospital in Israel.
We are trying to implement the integration between the CO (Controlling) and the ISH module.
I haven't found any valuable information in the internet until now.
I will be grateful if you could send me any documentation regarding the ISH-CO integration
I am trying to create a case based order (internal order that should be created for a case in the ISH) but with no success.
I created an internal order type in CO and customize the relevant data ,in the basic settings for "SAP Healthcare-integration with controlling" ,but no case based order had been created .
The revenue posted to the profitability analysis segment instead of the case order.
Maybe do you have any idea why is that and what is missing?
I would really appreciate it if you could help,
Thanks in advance;
Best Regards,
Yael

Hi Yael,
first of all good to hear that you solved the problem. Actually we have a couple of similiar processes where SAP Patient Management uses "standard" ERP functionality in the background. Sometimes it is a good strategy to first check out whether the "standard" functionality works as expected by invoking the respective transactions in ERP manually (using the values which you lateron expect IS-H to use automatically). If they work according to your expectations you can then focus on the IS-H configuration.
I'd like to come back to your point on the documentation. If you write that you think it was not good enough, I am sure you have some ideas how to improve it? As you may know we are moving more and more into collaborative documentation technology like Wikis. Would you be willing to maybe actively help improving parts of the documentation by sharing some of your experiences and knowlegde?
For example, we could jointly start a Wiki page on the topic of IS-H/CO integration.
Please let me know your thoughts.
Best regards
Claudius

I built a wordpress site with video and none of my video formats (including webm) will play in Firefox. Can you help troubleshoot?

The site is using a custom Wordpress theme. There are options to add different types of video for different browsers, and I've added webm for Firefox and MP4 for other browsers. The MP4 videos play great on all other browsers, but the webm doesn't seem to be working on Firefox. I get a blank screen on Firefox when I have only MP4 and also when I add the webm video. I'm pretty sure the MP4s were working in Firefox 19, but not on FF 20.
I added the troubleshooting info below. I have disabled my plugins and add ons as part of the troubleshooting process, but I don't think they're the problem. Please let me know if you have any leads!
Thanks,
Jeff

I am not sure, how much this code snippet will help - in any case you need to embed the file (ogv in the case below) into a wrapper as follows
<script type="text/javascript" src="http://s3.amazonaws.com/s3.www.universalsubtitles.org/embed.js">
"base_state": {
"language": "sl"
"video_url": "http://videos.mozilla.org/serv/brand/Mozilla_Firefox_Manifesto_v0.1.ogv",
"video_config": {
"width": 550,
"height": 310
</script>
The code is from mozilla.si (worpress-based) page.
Hope it helps.
Regards

Need help with LSMW fro specific case

Hello,
I am going to create project on lsmw for data migration from legacy system. In this specific case it is not just migration of the data to SAP system but its processing the data an dthen creating objects in SAP system. Hence its very perfomarmace critical.
I amn using Idoc and BAPI in lsmw.
My question how to improve performance here .
My options:
1. Call the API(which is processing the data) in side the BAPI with new task for each independent set.
2. No need of (1) if I am doing parallel processing in step idoc processing. Here lsmw itself provides parallel processing of Idoc.
3. Use FPP . but since FPP can be integrated only for data in database, I would need to first store the incoming data in a temp tables and then call API in FPP run where API reads data from temp tables .
Can you please suggest from your experience which is the best technique to improve the perfromance in this situation ?

Hello Suresh,
Thank you so much for resply.
My proiblem with lsmw is that I cannot call API in background job but it wil run in dialog process.
That was one reason to think of storing it temporarily and tehn processing it in FPP.
But just today I came across what is called as data transfer workbench help document where it says that you can process job in background . Can anyone confirm this ?
If yes then my next question is how to enable parallel processing using workbench

Weak Wi-fi signal from Actiontec GT704WG B modem/router - need help troubleshooting!

I have been using a Verizon-provided Actiontec GT704WG B modem/router for a few years as my Verizon DSL connection. I connect my main computer to the GT704WG B via one of the Ethernet ports - no problem with this. I also have a laptop that (usually) makes a wi-fi connection to the GT704WG B. However, the wi-fi connection frequently slows down enourmously or dies entirely, at random times. The laptop is located downstairs from the modem/router, which is about the farthest physical location in ther house from the GT704WG B.
This may be a distance problem that might be solved by bringing the modem physically closer to the laptop, but I'm puzzled why the problem is intermittent. It's also possible that there is something wrong with the GT704WG B, that is causing it to transmit a weak signal.
Any suggestions for troubleshooting this problem appreciated.
I'd also like to know if anyone can suggest a router or range extender that might relay a stronger signal downstairs. Or should I try getting a more current modem/router from Verizon? That GT704WG B is a bit old...

You're welcome. I suspect there may be some confusion on which is which going on here. Repeaters and Access Points are two different things. Repeaters are single radio devices in most cases where the repeater takes the signal it is receiving from your router, and then re-broadcasts it. When this is done, half of the radio bandwidth goes towards receiving or sending data to and from your router. The other half of the radio bandwidth is spent transmitting to or receiving data from your devices that are connected to the repeater. It's similar to the game of Telephone. A direct connection to the network is faster, but if you must repeat the message over a medium you introduce delay. So, in more technical terms, a Wireless connection that operates at 20Mbps download or upload (Wireless is half duplex by nature) will operate at 10Mbps download or upload when attached to a repeater, since 10Mbps of the 20Mbps the repeater's radio can do is being used to transmit the message to one end.
In some additional terms since this part of my post got chopped off, what an Access Point is would be essentially another wireless radio with a direct, wired connection to your network. It can be thought of as an Expressway. Each device chooses the best wireless signal to use in your network (Router or Wireless Access Point) and then has a connection directly into the network. Both radios can run at 20Mbps and a single device will be able to get 20Mbps from either unit. These require more work but in heavy wireless usage environments, it makes sense to use access points.
===========================
jduesenb wrote:
Thanks for the advice re. changing the channel. I'll try that. Since there seem to be about a dozen networks around here that mayne causing interference, that might help.
Verizon tech support advised me that an access point would cut my bandwidth, but that a range extender would not. (????) I have installed a range extender but I'm not sure it has made any difference. The problem has not happened since I did that, but since it is intermittent, I don't think that proves that the problem is solved. AFAICS, the wireless speed has not changed in any significant way.
=========================
========
The first to bring me 1Gbps Fiber for $30/m wins!

Help needed in writing SQL CASE or DECODE statement

Hi experts,
I need to write a SQL to select order_num, cntry_cde, prod_id and Qty by joining order_num on PROD_ORDER and PROD_ORDER_TXT.
Here is my sample data
PRODORDER_
order_num     cntry_cde     Prod_id     Qty
100     US     A1     5
101     US     A2     10
102     AU     A3     4
103     AU     A4     9
104     IN     A5     3
PRODORDER_TXT_
order_num     cntry_cde     Prod_id
100     US     A1
101     US     A2
102     NZ     A3
103     AU     A4
104          A5
Here is the requirement,
1) If the cntry_cde in PROD_ORDER is same as cntry_cde in PROD_ORDER_TXT then select PROD_ORDER.cntry_cde (orders 100, 101, 103)
2) If they are different, pick the country code from PROD_ORDER_TXT (order 102, AU <> NZ)
3) If they are different and PROD_ORDER_TXT.cntry_cde is NULL, I cannot use it as cntry_cde in my report (order 104). It happenend just because of the bad data at source.
I cannot avoid it. Then simply use the cntry_cde from PROD_ORDER
Output expected
100     US     A1     5
101     US     A2     10
102     NZ     A3     4 -- AU changed to NZ
103     AU     A4     9
104     IN     A5     3 -- IN retained as PROD_ORDER_TXT.cntry_cde is null
sample table creation and insert statements are below
create table prod_order
(order_num number,
cntry_cde CHAR(2),
prod_id VARCHAR2(6),
qty number)
create table prod_order_txt
(order_num number,
cntry_cde CHAR(2),
prod_id VARCHAR2(6))
insert into prod_order values (100, 'US', 'A1',5);
insert into prod_order values (101, 'US', 'A2',1);
insert into prod_order values (102, 'AU', 'A3',4);
insert into prod_order values (103, 'AU', 'A4',9);
insert into prod_order values (104, 'IN', 'A5',3);
insert into prod_order_txt values (100,'US','A1');
insert into prod_order_txt values (101,'US','A2');
insert into prod_order_txt values (102,'NZ','A3');
insert into prod_order_txt values (103,'AU','A4');
insert into prod_order_txt values (104,NULL,'A5');
commit;
Thanks for your help in advance
Edited by: sarvan on Mar 28, 2012 1:39 PM

Hello
Thank you for posting all of the ddl and test data along with your expected output - very helpful!. One small point would be to remember to type {noformat}{noformat} before and after any section of code or data in your post so that formatting is retained. Anyway, this should be a simple join and a combination of CASE and NVL...Select
po.order_num,
CASE
WHEN po.cntry_cde != NVL(pot.cntry_cde,po.cntry_cde)
THEN
pot.cntry_cde
ELSE
po.cntry_cde
END cntry_code,
po.prod_id,
po.qty
FROM
prod_order po
JOIN
prod_order_txt pot
ON
( po.order_num = pot.order_num
ORDER_NUM CN PROD_I QTY
100 US A1 5
101 US A2 1
102 NZ A3 4
103 AU A4 9
104 IN A5 3
5 rows selected.
HTH
David
Edited by: Bravid on Mar 28, 2012 8:32 AM
corrected !=

Help on converting query with case into decode

Hi Can anyone help me to revise my plsql query? Below is a portion og the procedure I am changing to meet Oracle 8i.
SELECT SUM(NVL(CASE WHEN (weeks='wk1' ) THEN qty END, 0)) wk1,
SUM(NVL(CASE WHEN (weeks='wk2' ) THEN qty END, 0)) wk2,
SUM(NVL(CASE WHEN (weeks='wk3' ) THEN qty END, 0)) wk3,
SUM(NVL(CASE WHEN (weeks='wk4' ) THEN qty END, 0)) wk4
FROM TABLE1
Thanks in advance.

pls try this....(code not tested as no create table etc provided).
select dt
from (select decode(is_tbd,
'yes',
decode(is_tbd_order,
'no',
'tbd',
decode(sign(ex_fac_date - (v_asofdate + 131)),
1,
'tbd',
null),
decode(sign(ex_fac_date - (v_asofdate + 131)),
1,
'tbd',
null)),
null) dt
from dual
union all
select decode(sign(ex_fac_date - (v_asofdate - 1)),
1,
decode(sign(ex_fac_date - (v_asofdate + 5)),
0,
decode(is_tbd, 'no', 'wk1', null),
null),
null)
from dual
union all
select decode(sign(ex_fac_date - (v_asofdate + 6)),
1,
decode(sign(ex_fac_date - (v_asofdate + 12)),
0,
decode(is_tbd, 'no', 'wk2', null),
null),
null)
from dual
select decode(sign(ex_fac_date - (v_asofdate + 13)),
1,
decode(sign(ex_fac_date - (v_asofdate + 19)),
0,
decode(is_tbd, 'no', 'wk3', null),
null),
null)
from dual
union all
select decode(sign(ex_fac_date - (v_asofdate - 1)),
0,
decode(is_tbd, 'no', 'past_due', null),
null)
from dual
where dt is not null
Regards

Please Help PI Data Dependent Integration Builder Authorizations NOT Workng

Dear Friends / Experts,
I had spend many days and explored all Weblog and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
Our Environment - PI 7.0 SP 16
Created a new role in the Integration Builder Design
u2013Add Object Types of any Software Component and Namespace
- Enable usage of Integration Builder roles in Exchange Profile
Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
Assign users to the newly created Integration Builder roles
u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
u2013Assign users to these roles
u2013Assign the Integration Builder roles to the above groups in Web AS Java
u2013Assign unrestricted roles to Super Users
Please help - How to validate whether Data Dependent Authorizations are Activated?
I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
Thanks a lot
Satish

Hello,
so to give you status of our issue.
We were able to export missing business component .
But we also exported some interfaces after that and we had some return code 8, due to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
Also recommending to read that, which is pretty good.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
Thanks all,
S.N

Adobe abandons help. no follow up on case numbers

just thought i'd enlighten new users/purchasers of the ps/lr photographers bundle of the creative cloud.
new choice on the phone tree press two if you wish to cancel your membership.
apparently they are overwhelmed or short handed or otherwise clueless on the tech hellp as they never got back to me on my first and only case number. multiple times left on cheezy music hold...

worriedshrimp wrote:
so what next?
I understand your frustration, but you need to understand something as well: Other people won't want to help you if you insist on giving attitude.
I'm a software engineer with 37 years experience and a published Windows expert, as well as a Photoshop expert. If you insist on not accepting what I say I do actually have better things to do.
However, if you really do want to resolve your problem, I'm going to try one more time.
What we know so far is the following:
You have Windows 7 Pro on a Dell Precision Workstation. You haven't said whether it's Windows 7 Pro x64, but I'll assume you have the 64 bit OS.
Photoshop CC worked for you as recently as 2 weeks ago, after which it stopped working.
You've apparently been able to remove and reinstall Photoshop via the Creative Cloud Cleaner tool, then presumably you installed the Photoshop CC (2014) software via the Creative Cloud application.
Photoshop won't start. I don't know if it's crashing and emitting an error message or just silently not starting.
Correct me if I'm wrong so far, and please be very specific.
What you need to do next is to go into your Windows Application event log and look for error messages (with red icons) that describe what actually happened the last few times you tried to start Photoshop. Specifically, to do this, do the following:
Click your Start button.
Type event
When Event Viewer comes up, click it.
Expand Windows Logs by clicking the little arrow to the left of it, then click on Application.
Scroll down through the list looking for the next message that starts with a red icon followed by "Error" and says something like "Application Error" the Source column, which corresponds in time to a failure to start Photoshop.
Copy the data shown in the General tab, and post it here.
Repeat the above two steps for several recent Error messages corresponding to Adobe software failures.
-Noel

HELP! Form-Report integration problem!

Hi all, I have a problem in integrating report in dev10i. I used to use Dev6i and have no problem in using run_report_object in 6i. I have posted this in Report for few days but haven't got response.
I got the REP-0503 You did not specify the name of the report and FRM-40738 Argument 1 to builtin Report_Object_Status can not be null. The report run OK in report builder and I create the paper only layout. Also, I save the report as *.rdf and create a report object in form that point to this *.rdf file.
This is my PL/SQL code:
PROCEDURE P_PRINT_REPORT_OBJ(vc_reportoj Varchar2, vc_reportserver Varchar2, vc_runformat Varchar2) IS
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id := FIND_REPORT_OBJECT(vc_reportoj);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESFORMAT, vc_runformat);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_SERVER, vc_reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_OTHER, XXX='||:XXX.XXX||' paramform=no');
vc_ReportServerJob := RUN_REPORT_OBJECT(v_report_id);
vjob_id := substr(vc_ReportServerJob,length(vc_reportserver)+2,length(vc_ReportServerJob));
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||vjob_id||'?server='||vc_reportserver, '_blank');
ELSE
message('Report failed with error message '||vc_rep_status);
END IF;
END;
What gives? Do I miss something here? Do I have to set up other thing??? Also what is the name of report server in Dev10i? I am under impression that this is not needed so I put blank '' when I call this procedure in WHEN-BUTTON-PRESSED trigger like this:
P_PRINT_REPORT_OBJ('myreportobj','','HTML');

Hi all, I created simple report from 1 table and save it as *.rdf. I then make a simple form consisting 1 block and a button that have WHEN-BUTTON-PRESSED trigger that call P_PRINT_REPORT_OBJ. I create a report object in the form that point to my *.rdf report file and name the object MYREPORT. This time it gives Rep-0110 Can not open file '%n~<intangible character>' and REP-1170 Error while opening or saving a document. After that other message popup with REP-0110. It seems that FIND_REPORT_OBJECT could not find the file at all/giving the wrong filename as argument. Do I have crooked installation? I have tried it on 2 diff machine running XP2. Is this because of Win XP2? I have admin privilage user account for winXP2. Please help, this is not making a sense at all. I have no problem in Dev6i.
PROCEDURE P_PRINT_REPORT_OBJ IS
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
BEGIN
v_report_id := FIND_REPORT_OBJECT('MYREPORT');
vc_ReportServerJob := RUN_REPORT_OBJECT(v_report_id);
END;

Help Troubleshooting Flya Kite Integrated Case

Similar Messages

Maybe you are looking for