HELP! Trying to add two different movements to edit

Lets say I have an effect I have done. Like, bringing a character in from the bottom of the screen. It takes me 20 or so frames to do it. I have marked key frames along the way so that the footage will follow the line I have laid out.
Now, how the heck do you stop it there so you can add another movement to the end of the piece?
Here is an example...
http://guycon.com/postcards/qt/clown01.html
See how the clown glides in from the bottom, stops, delivers his line and then leaves again.
I cannot figure out how to add the end effect.
I can animate him in, he stops, does his line but when I add the end effect, it somehow happens to the WHOLE clip.
Make sense?
Any big brains out there want to help? i have been throwing IQ at this but i am heavily unarmed.
2 GHz G5   Mac OS X (10.4.7)  
2 GHz G5   Mac OS X (10.4.7)  

Have your object off screen.
Create Keyframe
Go to the frame where you want the object to be on screen. (ie: frame 20)
Create Keyframe
Move object to it's desired position
Go to the frame that corresponds to the amount of time you want your object on screen. (ie: 170 if the object is to be onscreen for 5 secs)
Create Keyframe
Go to the frame where you want the object to be completely off screen. (ie: frame 190)
Create Keyframe.
So in the above example:
KF at frame 1 = object offscreen
animates on
KF at frame 20 = object onscreen
KF at frame 170 = object onscreen
animates off
KF at frame 190 = object offscreen
Is that what you're looking for?

Similar Messages

  • How to add two different database connections on Model

    Hi,
    In my application, I need to create View Objects on different databases. So I need to add two different database connections on the Model.
    But it seems like Model can be connected to only one database. I tried adding another project to add the second db connection. But after I created a read-only View Object in the second project, it didn't generate corresponding data control in the Data Controls panel.
    Could anyone help me on this?
    Thanks!

    Do you mean adding the second project folder in ViewController->Project Properties->Libraries and Classpath?Yes, either that or: ViewController -> Project Properties -> Dependencies
    And I didn't see the first Model project in the ViewController classpath. Otherwise it wouldn't work. The first model project IS in 'classpath'. Here's how:
    ViewController -> Project Properties -> Dependencies
    I tried this and recreated the View Object. Still didn't generate the datacontrol. No idea why you had to recreate the VO.
    Is your VO in an application module inside the SECOND project?
    After you are sure that everything is in the ViewController's classpath, just try restarting JDeveloper.
    This is very basic. has to work.

  • How to make each playlist for each movie songs ? when i tried to add songs all movie songs comes in row , its very difficult to find which movie song belongs?

    how to make each playlist for each movie songs ? when i tried to add songs all movie songs comes in row , its very difficult to find which movie song belongs?

    Thank you! I put some self help hypnosis tracks to listen to on my iPod. I did not want to go to the next track automatically, I wanted to listen to them individually, one at a time. (If I fell asleep, I did not want to 'wake up' in the middle of a different track.) Your information helps me understand that I need to re-load this playlist onto my iPod from my  Mac computer, only first, I need to UNCHECK the boxes in front of each track so the iPod will STOP each time after playing the selected track. It is too bad that so many functions are not availabvle within the iPod, but that is probably why they can make it so compact.

  • How to add two different images on photoshop cs5?

    I was learning about the layers and masks and i seen that i have to have two images under each others under the layer option pannel, i tried many times to add images but it always shows in two different pannels as the folloing image I want to add two different images in this pannel to make any changes i want
    Thank you.
    image

    When you click on that icon Photoshop will add a revail all white layer mask and it will be the Photoshop target. Begin painting with black over the image part you wish to hide. Should you paint away something you want change to white paint and paint it back. Lower the brush opacity to fade in and out the image part.
    If you use ALT+Click on that icon a hide all black layer mask will be added as the current taget and hide all of the layer paint with whits to show.

  • How to add two different page numbers in a single page

    How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

    It's quite complicated, see
    Two Page Numbering Schemes in the Same Document.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Diversity and trying to conver two different areas

    So the whole purpose of diversity is to provide/improve coverage in a same area.  Basically two antennas placed with a reasonable distance from each other and the concept is that one antenna might receive a better signal than other and then both signals can be combined to get a single stream.  End result better communication.
    Now something I have noticed that people are doing is taking the two antennas and putting them like 25 to 50 feet apart with diversity enabled trying to cover two different areas.  At times two different rooms so like one antenna is in one room and second one is in another room with a concrete wall between them.  Apparently they are saying that it is working for them.  I'm trying to understand the logic behind that how something like that wouldn't cause issues unless they have clients only on one side?

    I've seen set-ups like this before and people at the site can (and will) say that it's "working".  
    Until I get a wireless sniffer out or do some scanning, it seldom works.  They will say that it's working purely for political (don't want to get themselves into trouble) and/or financial (they can't afford to put two APs) or both.  
    This may work (somewhat) in 802.11a/b/g but stick 802.11n/ac and I'm certain it won't work.  When I mean it won't work, I mean you won't see the full benefit of connection speeds of >155 Mbps. 

  • Is it possible to run two different apple tv units on the same network and play two different movies off of my iTunes library

    Is it possible to play two different movies on two seperate apple tv units on two tvs at the same time using the same itunes library

    AC is corret you can do that.  It might work a bit better for you if you use a wired connection vs a wireless one for the ATV's.

  • After downloading two different movies the cover page artwork has vanished?

    After downloading two different movies the cover page artwork has vanished?

    This is indeed a sign of the code not being threadsafe.
    There is only one fact that you need to keep in mind: there will only one instance of a servlet class be created in the beginning of application's lifetime and it will be shared among all requests and sessions in the application's life. Knowing that fact, it should indeed be obvious enough that an instance variable will be shared among all requests/sessions as well. Solving this problem is also obvious enough: declare request and session scoped data threadlocal (inside the method block).

  • Help - Trying to add a Homehub 2 to extend my Home...

    Hi All
    I've recently acquired a Homehub 2 (type A) and I'm trying to add it to my network to extend my Wifi.  My primary router is a Homehub 3 (type A).  I'm using TP Link Powerline adapters around my house to extend my wired network, and plugging my HH2 into a gigabit switch from one of the Powerline adapters (I know this works as I have a working Xbox and WDTV both networked from the switch via the Powerline adapter).
    I've followed the guide here (http://www.filesaveas.com/jarviser/repeaterhubswired.html) to set up the HH2 as a WAP.
    I've successfully reset to HH2 back to the factory defaults, accessed the HH2 via the preset admin password, reset the admin password, renamed the SSID to a unique SSID, given the SSID a password, disabled DHCP, disabled the firewall, and reset the IP address to 192.168.1.175.
    Currently I can locally browse to the HH2 web client and login at 192.168.1.175.  I can also see the HH2 via wifi on my network.  However, the issue is that when i attempt to connect to the HH2 via wifi it never manages to assign the device an IP address.
    Anyone any ideas as to the problem / solution?
    Thanks!
    Solved!
    Go to Solution.

    I got the same problem at the weekend (albeit between two HH 2 type a routers) when the power line adapters weren't connecting to each other.  If you have changed the DHCP settings in the "slave" router - the IP addresses will be allocated by the master router.  If the slave cannot connect to the master then it can't assign an IP address.
    Anyway that's what seemed to have happened to me - immediately the two routers were connected the IP addresses resolved immediately.
    You may want to try resetting the powerline adapters and make sure they are connecting to each other (on the BT supplied adapters that means the top "data" light is displaying green on both adapters).  I also found that sometimes after a disconnection or the master router being switched off, I had to restart the "slave" router after the master router was available again.
    I hope this helps.

  • Hi in need of help trying to add a live voting system

    i am trying to add a live voting system to my website basically two buttons one dislike and like its quite hard to explain a good example is www.truelad.com they have the set up that i want and i am quite confused on how to do this.
    any help would be mch appreciated
    oyea and i want it to be live and login feature

    Which server-side programming languages and databases are you using for your site? 
    There are several voting widgets (plug-ins) available for WordPress, Joomla! & Drupal. If you're using one of those frameworks to build your site, that's probably where you should begin searching. 
    Nancy O.

  • Is it possible to add two different audio tracks to a clip which can be selected separately in the final clip?

    I'm trying to edit a short clip with two different audio tracks (audio in two different languages). The tracks are not supposed to overlap but rather should be able to be selected individually in the final clip. Do I need special software or is iMovie actually able to accomplish that?

    I seriously doubt that this is possible. I think when you get this kind of option on a DVD, the audio and video streams are encoded separately and you run the language of your choice by choosing it from a menu.

  • Help with subtracting from two different rows

    Hello everyone..beginner here.. :)
    I have a table wherein I need to subtract two different dates to get the idle time.
    I need to subtract evnt_end from evnt_start to get the difference for the idle time...
    Thanks for your help..
    Here is a sample of the table:
    EVNT_ID..........*EVNT_START*....................*EVNT_END*
    .....1..........6/22/2010 12:34:30 PM..........6/22/2010 6:36:06 PM
    .....2..........6/22/2010 9:58:38 PM...........6/23/2010 4:02:11 AM
    .....3..........6/23/2010 5:10:43 AM...........6/23/2010 11:08:13 AM
    .....4..........6/23/2010 12:22:24 PM..........6/23/2010 6:21:17 PM
    .....5..........6/23/2010 10:29:03 PM..........6/24/2010 4:28:11 AM

    When the evt_start and evnt_end columns of your table are in DATE format,
    you can use
    select (evnt_end - evnt_start) difference_in_days from <yourtable>;you will receive the difference in days.
    To receive the difference e.g. in seconds you could use:
    select (evnt_end - evnt_start)*24*60*60 difference_in_seconds from <yourtable>;or if you also want to see your orignal data:
    select EVNT_ID,
             EVNT_START,
             EVNT_END,
             (evnt_end - evnt_start)*24*60*60 difference_in_seconds
    from <yourtable>;Edited by: hm on 12.10.2010 23:09

  • Trying to add two AP's to the AEBS(n) - no luck - any ideas?

    Hi everyone, here's my situation. I ran a network in my house on Belkin routers (7230-4 and 2 7231-4's) for a while now. One router was the main router, the other two were Access Points to enable my TiVo's (not wireless capable by themselves) to become wireless by using USB-to-Ethernet adapters between the TiVo's and the AP's, and then the AP's "made" them wireless. I had no problems with everyone "seeing" each other on the network.
    I bought an AEBS(n) with the intention of replacing my main router, and keeping the 2 AP's as they are. I want to keep the same setup as above.
    I went in and reset one of the AP's, since I needed to change the MAC address of the main router that was needed in the setup. Plugged it back in, changed the settings on the AEBS to enable WDS, added the MAC addresses of both AP's, and I was a happy camper. Everything worked, I had access to both the AP and the TiVo, so I figured I would do the same thing on the second AP.
    I made the exact changes on the second AP, but this one doesn't work - or, a better description would be that it is incredibly slow. If I want to access the second AP (from my computer, wirelessly) or the second TiVo, I very rarely get a connection - nost of the times it tells me I can't open the page. Not only that, but it slows down my accessing the first AP or TiVo. If I unplug the second AP, everything goes back to normal, zooming along.
    My question is: is there a problem with the AEBS handling more than 1 AP on WDS? I can't believe the problem would be the second AP, since it's setup exactly like the first one. They should all "play" together nicely, and yet they don't. If I look at the logs on the AEBS, it looks like it constantly connects and disconnects with the AP's - like every 6-10 seconds there's an entry undoing the previous one (connect - disconnect - connect - disconnect etc). Is there another setting that I should make to enable more than one AP, or to let them be connected to the main station for more than a few seconds?
    Also, how can I see what computers are connected to the AEBS at one time by IP? It seems like it shows some by MAC address, but I can't really see an updated list on the DHCP screen (I turn off my computer, and it's still being shown in the list).
    A third question is (last one, I promise) why does the AEBS asign IP addresses all over the place? I would expect it to start with 2 and move on from there, but it assigns them like 2, then 200, then 3, then 199 - and that's a problem since my TiVo's are supposed to be 200 and 199, and it doesn't seem to release these IP's even after the computers to which they were assigned are turned off.
    Any help on the above would be highly appreciated.
    Thanks.
    Macbook   Mac OS X (10.4.9)  

    Update: I just made sure that the AP's go through the main router (AEBS) and do not talk to each other directly (which is what they were trying to). I managed to restrict access to them so that only that AEBS (and the other computers through the AEBS, not directly) talks to them. After this everything was smooth sailing.

  • How can I add two different hyperlinks to a banner ad?

    I have a banner ad that cycles back and forth between two ads, and am trying to set it up so that when the first ad is up (5 seconds or so) and the viewer clicks on it, it goes to one URL, and when it changes to the second ad and the viewer clicks, it takes them to a different URL.
    I've attached the .fla file I'm trying to build. Thanks for any help you can provide!

    Wow- thanks a lot! I didn't expect you to take my file and make it 
    work...I just wanted to learn how to do it.
    I set the frames per second back to the original 12, but otherwise 
    this works perfectly. Thanks so much!
    Dan

  • HELP Trying to add a printable image to a pdf Acro Prof 6

    I've already spent 4 days too many on this project. I've been asked to take this pdf and create one identical for the company. It's a fillable form also so instead of trying to recreate everything from scratch I was able to edit the text and change over everything that I needed to, which wasnt much.
    Except.... I can not get our company logo on the top of the page. I have Acrobat Professional 6. Yesterday I finally thought I solved the problem going under Tools -> Advanced Commenting -> Attach -> Paste from clipboard. But because its just a "comment" when I go to print it wont show up.
    I've been told to just add an image to the Header, yet I am unable to figure out how... Once I'm under this section it only allows for Text, not an image.
    I'm really pulling my hair out here over this... If anyone can please tell me how to add an image to a pdf (which is a fillable form) that when printed will actually show up as well PLEASE HELP.

    I just opened the watermark tool in AA8. I don't have AA6 handy. It has a scaling and location on the page after I select a graphic file to import. It also shows a sample page so I can see how it will display. I do not remember how watermarks worked on AA6. Will try in a bit.
    For AA6, it looks like you can only put in a PDF file. In that case, use a word processor to create the desired result you want for the background (the entire page, not just the logo. Then create a PDF to use for the watermark or background. Open the watermark/background tool and insert your new PDF (not sure if you should use background or watermark - might give both a try and see if that does the job. At least it appears to be what my system suggests. You need to be sure you use the same paper size since AA6 places the whole page you create. You might be able to use other sized, but then you have to deal with centering and such. Unless you have time to play a bit, I would create it the one the same size paper as I have suggested and then it is one less thing to have to work out.

Maybe you are looking for