Help using cc on macbook pro
I have downloaded and installed photo shop from the creative cloud app manager. It will not launch and I can't seem to get it to work. What am I doing wrong
Also... JUST FOR MAC USERS - Some 10.9.3 links
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0
Similar Messages
-
Need some help using BootCamp on MacBook Pro 2011
Hello,
I have just bought a CD which is not compatible with MacBook's, and can only use Windows operating system. I have been direceted to use the BootCamp application, when I load the app, it comes up with two options, to download something or buy Windows 7, which I dont have, therefore I chose the first option. I was told to put in a USB drive in, which I have done, and a load of files have been downloaded to my USB drive, but what do I do next?
Thanks.As you are using OS X Mountain Lion and looking at the MacBook Pro you are using, you can install a 64-bit Windows 7 or 8 version, but you can't use Windows XP or Windows Vista. If you haven't got Windows yet, buy Windows 7 on a DVD in Amazon or eBay, or Windows 8 from the Microsoft Store or Amazon (make sure that you buy it on a DVD).
What you have downloaded to your USB drive are the Boot Camp drivers. Those drivers are for all the hardware of your Mac, because Windows doesn't detect everything, so you need those drivers to run Windows properly and get the maximum performance of the MacBook Pro. You have to install them just after installing Windows.
If you need help installing Windows with Boot Camp, see > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf -
I have two macbooks, one is my old one which my wife uses and my macbook pro. When either of us make changes in Safari it changes it on the other's computer...please help.
You're both synchronizing Safari with iCloud while signed in with the same Apple ID. On one computer, sign out of iCloud in its preference pane and sign in with a different ID.
-
I have two macbook pros a 2.4ghz and a 2.2ghz. Is there a way to use the other macbook pro to help with any cpu intensive apps like audio and video apps. I haven't had much luck on finding anything about sharing resources. It would be awesome if you could link up two macs and use both of them to power through processor intensive tasks.
Yep here you go.
http://www.youtube.com/watch?v=vLujLtgBJC0 -
I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS6. Well, InDesign is the only one that works and I have a ton of work due! I don't have a serial number for Photoshop or Illustrator except for CS3, and they don't work. InDesign gave me no problems. Illustrator says it can't work on this machine. Photoshop needs a serial number. I'm stumped and getting anxious and freaked out. Can anyone help? Adobe Chat is down right now.
if you have a cc subscription, close ps > sign out and then back in to your cc desktop > open ps.
ai cs6 requires:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X v10.8 and v10.9 when installed on Intel-based systems.*
2 GB of RAM (8 GB recommended)
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024 x 768 display (1280 x 800 recommended) with 16-bit video card -
I had a new MacBook Pro that was damaged and I am now using a different MacBook pro as my primary computer (running yosemite 10.10.1).
I did uninstall the Creative Cloud off the old MacBook before I stopped using it.
I have downloaded the Creative Cloud and signed in using my adobe username and password, but when I went to download the Photoshop App it is only giving me the TRIAL VERSION.
How do I make sure that the apps are the full version that I have already paid for? (I do know that my subscription is still current)
Thanks for your help
- ShawnShawn I would recommend utilizing the steps in Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html to resolve the connection error which is likely preventing the software from authenticating.
-
How do I set up my AT&T Beam USB modem to use on my MacBook Pro?
I purchased the AT&T Beam after the salesperson at AT&T told me it wouldn't be a problem to use with my MacBook Pro. When I received it, the instructions were bare minimum which didn't help me at all. So, I plug it into my USB and nothing happens. How do I get my MacBook to recognize it?
It is all a bit confusing. AT&T product pages for the AT&T Beam (AC340U) do not appear to say anything about Mac OS X support, but a "Device How-To Center" page does. The latter also mentions Netgear as the manufacturer. At a Netgear site, the following page could be found:
http://kb.netgear.com/app/answers/detail/a_id/23444
I do not know whether or not the web page above (or the problem/procedure described) is at all relevant to your very modem and the network operator in question. I agree with LowLuster, do contact AT&T tech support and ask them to sort things out.
Generally speaking, I do also agree with Linc Davis about USB mobile broadband modems. The need for special driver software often leads to difficulties. A mobile broadband hotspot (3G or 4G), using Wi-Fi for the local wireless connection, is usually a better solution. An added advantage is that the hotspot location can be changed for optimal radio reception from the mobile tower.
Jan -
i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
What RAID Setup do you use for your Macbook Pro Scratch Drive?
Is there any benefit to using an Express-ESata Raid Enclosure vs a single esata drive as the scratch drive?
If so, is there any benefit to using a 4 drive Raid 0 vs a 2 drive raid 0?
What Raid setups are any of you all using with your MacBook Pro's? Is there a significant performance difference between using a E-Sata drive and a FW800 drive. Is RAID the right way to go?
Sorry I'm not making a lot of sense right now, but I've searched through 20 or so pages of the forum and didn't see that anyone had addressed this question yet.OK, just to give you a frame of reference, I just performed the following tests -
I hooked up my Sony AVCHD camera to my Mac Book Pro 2.4 ghz with 4 GB ram - (pretty close configuration to yours) - and imported a 26 second clip into FCP 7 with the following drive configurations:
Capture to internal Mac Drive, no externals: 26 Second clip takes 44 seconds
Capture to external WD USB2 drive: 26 Second clip takes 44 Seconds
Capture to external CalDigit 2 Sata Drive Array, Raid 0, via Firewire 800: 26 Second clip takes 42 seconds
OK, so now I move the camera over to my Mac Pro 8-Core, 2 x 3.2 Ghz Quad Core Xeon with 14 gigs of ram, and capture *to the same external CalDigit 2 Sata Drive Array,* Raid 0, via Firewire 800: 26 Second clip takes 11 seconds
My conclusion would be the drives and drive throughput is not as consequential as the CPU horsepower in doing the conversion from AVCHD to Pro Res. However, there are many very knowledgeable people who look at these threads, and I would be interested to hear what they have to say.
Hope this helps.
Message was edited by: Meg The Dog to correct typo -
What is the best external battery to use with a macbook pro retina?
Looking for the best option here. What is the best external battery to use with a macbook pro retina?
You should check your date of purchase against the manufacturer's warranty
or guaranty since some of those better brands have some recourse should
they fail within a specified time period. A good reason to save dated receipts.
Since solid-state USB drives probably don't (all) use a wear-leveling software
to equally utilize their recordable space evenly, it is possible that some of these
may exhibit a failure in some sector areas due to excessive over-writing. If the
ones you use do not have such a technology or an undercounted total capacity
with a means to automatically write in other sections, you may have to consider
manually using a disk utility to zero-overwrite and reformat them occasionally.
Even so, that may only help a marginal flash or thumb drive work a little longer.
Should a camera memory card fail you still may be able to attempt with margin of
success, to +recover image files+ from it. re: http://www.cgsecurity.org/wiki/PhotoRec
The standard default format they ship with works well for most file types; so if
you aren't moving OS X or Mac app specific files around on a USB flash drive,
the original format should be fine. Oh, you can use Disk Utility to attempt to do
a repair; but in some cases you may have to reformat them, etc.
{Some of the flash drive warranties or guarantees may vary from between regions;
so if you have one with a '5 Year' guarantee in the US, other rules may apply in EU,
or when you seek to replace an item under warranty outside of where it was bought.}
Good luck & happy computing! -
Monitor HP w2448hc needs a driver to be used with my Macbook Pro, but HP only offers download to Microsoftprograms,... My screen behave unstable, waves, and I need to do something. Waht do I do?
Monitor HP w2448hc needs a driver to be used with my Macbook Pro...
Highly doubtful (see next response.)
...but HP only offers download to Microsoftprograms,...
The software is likely for the built-in webcam. The monitor/screen portion of the w244hc would NOT need drivers unless it had some funky non-standard amount of pixels. But the monitor is a standard 1920x1200 which the Mac should detect if you're using the HDMI or DVI connector.
...My screen behave unstable, waves, and I need to do something. Waht do I do?
Are you using the VGA connector? VGA, being an analog signal is more likely to cause the symptoms you describe (compared to the digital signals DVI or HDMI.) Often reseating the VGA connector can help. (IOW, push the VGA connector in harder...on BOTH ends of the cable.) But VGA would also be more susceptable to signal degradation with anything greater than 1600 pixels. So if you are using the VGA connector, get the appropriate DVI adapter for your Macbook Pro as soon as you can. -
Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID?? For example, I have an IPAD and a Macbook Pro. Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????
I have also tried changing the contact emails(you can contact me by) in Facetime(diff email for IPAD and Macbook Pro). Facetime tried the call, I see the accept buttom appear and it goes away as the call never connects? Any ideas??
-
I have had a series of Macs. They have been backed up with Time Machine. I am trying to restore TM backup files from the older Macs using my new MacBook Pro. No go. What do I do ?
I am trying to restore TM backup files from the older Macs using my new MacBook Pro. No go.
Migration Assistant (Finder > Applications > Utilities > Migration Assistant) is the tool that you would use to restore backups from older Macs to another Mac.
Details are here: http://pondini.org/OSX/MigrateLion.html The same info applies for Mavericks and Yosemite. If you are saying that this is a "no go".....where are you getting stuck? What error messages do you see? -
Can I use my old Macbook Pro as an external disc drive while installing Windows 7 through boot camp?
I want to install the Windows 7 CD on the newest version of the 2013 Macbook pro 10.9.2 running OSX Mavericks, through Boot Camp. It does not have a disc port, nor do I have an external disc drive....but I do have an older macbook that does have a disc drive and I know you can supplement it for an external disc drive.
My question is can I use my old Macbook pro's as an external disc drive for the installation of Windows 7 in Boot camp? Will this be a problem? Or do I have to buy an external disc drive separately.http://support.apple.com/kb/HT5287
Maybe you are looking for
-
How to call a Oracle Stored Procedure from Excel?
Hi, I am new to Oracle database programming.I have an application in excel which has to update info in every row to the database.I am calling a stored procedure in excel for this.The stored procedure is as follows which is executing without a hitch i
-
Can the role info be passed from portal to ABAP web dynpro application
Hi, We have some roles in the portal. We call the ABAP web dynpro applications from the portal. Is it possible to pass on the role from the portal to the Web dynpro ABAP application so that we can use this role information in the application. Thanks,
-
Half of my IPhone 5 is broken.
I dropped my Iphone 5 and the left hand of the screen isn't responding to touch and its dark, the glass is cracked but I was wondering what exactly is wrong with it like what parts may be messed up.
-
HT204074 I'm not seeing the manage devices option under my account information.
I only have the Apple ID summary, iTunes in the Cloud, Purchase History, Settings...what am I missing??? I am trying to remove an iPad from my account. Thanks!
-
Teouble with audio becoming out of synce with video.
Hello, I'm using final cut to edit my videos but for some reason, FCP has been giving me some issues. In my work flow I often layout two long video track in the timeline, then I will chop up the top track to create transitions from the top to the bot