Help w/ E-mail and Director

Hey all. I need to find code for Director to access G-Mail. I
want to be able to recieve and send mail. And then take those
e-mails and take information from them and use it in the shockwave
file. Is there anyway I can do this?

I tryed the example from adobe but i can't get it to work.
They say it doesnt need usedID or password, but with or without it
i keep getting the message "Server Message: 550 Administrative
prohibition"
The full log is:
quote:
ConnectToNetServer sent to server
ConnectToNetServer successful
HELO message sent to server
MAIL FROM message sent to server
RCPT TO message sent to server
DATA message sent to server
Message content sent to server
Server Message: 550 Administrative prohibition
Can anyone help me on this one?

Similar Messages

Help! Mac Mail and Hotmail issues

Hello. I'm looking for help with Mac Mail. I am a new Mac owner and haven't had any trouble before with hotmail on my ipod and iphone. Upon setting up the new mac and mail account (using a hotmail account) it started receiving messages, approximately 30. During that time, we turned off our Century Link wireless and set up a time capsule as wireless with the Century Link router/modem combo now acting only as a modem. After that, the email account stopped receiving messages. We tried removing the account and readding it and now no messages show up in the inbox at all. (not sure if changing the wireless actually affected any of this, but the timing was coincidental) When I look at "get account info", I can see that there are 543 messages listed under the Hotmail account under the heading "all messages on POP server." However, these messages do not actually show up in the Inbox. I've tried other help sites and as far as I can tell, the incoming and outgoing servers are set right. Any help would be greatly appreciated!

http://answers.microsoft.com/en-us/windowslive/forum/mail-email/how-to-set-up-ma c-mail-to-sync-your-outlookcom/afdfe981-20c7-4d4a-b6b1-9329b27f018a?tm=137900934 3708

Please help on create files and directories in Session Bean

Hi,
I am trying to create files and directories at run time from a session bean. Since EJB 2.0 prohibit the use of the java.io.* package. The only thing that I know how is to use the URLConnection. After getting a connection through URL. I may use the getOutputStream() to get a output stream to write to the HTTP server. But the getOutputStream() returns an OutputStream object which is one of the package in the java.io package. Since I need to create file and directory, I need to use the FileOutputStream that is also under the java.io package.
Can someone give me a hint what should I do. Here is a directory and the file that I may need to create;
Directory1/Drictory2/myFiles.au
Thank you in advance, your help is greatly appreciated.

From 24.1.2 (Programming Restrictions) of the EJB 2.0 spec:
� An enterprise bean must not use the java.io package to attempt to access files and directories in the file system.
The file system APIs are not well-suited for business components to access data. Business components should use a resource manager API, such as JDBC, to store data.
You might want to look at the File System Service Provider in JNDI for an alternative approach. I have never used an FSSP though.

CAn anyone help me with MAIL and my earthlink account?

I've had DSL with Earthlink for several years now and never had connection problems. In the past two weeks, however, MAIL will sometimes fail to send email and sometimes fail to retrieve email from my Earthlink webmail account. The strangest thing is that this happens intermittently, even though no settings have been changed. Most of the time I can retrieve email, but other times I get the error message that "port 110 has timed out". Most of the time, I cannot send email, but other times the email shoots right through when I open mail.
I called Earthlink about this and we set up my MAIL program step by step according to Earthlink guidelines. Unfortunately, this did not help the matter.
My MAIL preference settings are as follows:
My incoming mail server is pop.mindspring.com on port 110.
My outgoing mail server is smtpauth.earthlink.net. The outgoing server port is 587. SSL is not checked. Authentication is by password.
All of these settings are correct according to the Earthlink tech.
If this matters, my G5 is connected wirelessly to an Airport Express base station.
Again, I'm puzzled that I've only just begun to have these issues and they seem to happen randomly.I also see that similar discussions have been had on this forum with Earthlink and MAIL, but I don't see any resolutions. Can anyone shed some light on this? Thanks.
Message was edited by: Kevin Robinson
Message was edited by: Kevin Robinson

I had problems with my Earthlink DSL quitting about a month ago. I went through some of the same Earthlink tech support troubleshooting hoops, hooking directly into my ethernet port not into the Airport etc. Eventually an Earthlink senior tech said my Netopia modem was defective. After some financial haggling they sent me a new Zycel modem, that didn't work either. Earthlink made an appointment and sent out an AT&T tech to the house. He hooked in and said it was a defective phone company circuit board. The AT&T tech called in for the phone company to change the circuit board now both the Netopia and Zycel modems work.
Note: while checking the line, the AT&T tech it my DSL line was sending one protocol it would work if my modem was set up to receive it. (protocol is my word I don't remember his exact word).
Another Note: Also when Earthlink wanted to replace my modem they wanted my to pay (the dollar amounts are approximate) $80 for an new modem, or get a free modem with an exorbitant $40 shipping fee and commit to an other year of service. I eventually bargained down to a free modem, free shipping and $20 off the monthly fee.

Help Needed With Mail and Reminders Vs. To Do Apps

I am running Yosemite 10.10.3 and IOS 8.2 on a Late 2012 Mac Mini.
I have been all over the place trying to find a perfect To Do List App that fully integrates with Mac Mail. I have versions of Things, Todoist, and Wanderlist that will work, but I have trouble tying them into my ICAL for meetings and reminders.
I am the kind of person who looks all over for a solution to a problem, when it might already be in front of me.
So, how can I take a Email and send it as a to do item to Reminders, or better yet, a section of an email and send it to reminders. I know from there it will automatically sync up to my iCloud and everything else.
I do not need anything over complicated, or have to share with anyone, so I have been leery of investing in Todoist or Wunderlist pro because I cannot seem to get this going.
I am hoping that the geniuses here at the Support Forums can help me out. I am wasting too much time and effort, trying things and having it not work. I have to believe that Apple has the solution right in front of me.
Thanks,
John

Have a look at this page which Google turned u:http://www.uwc.edu/itresources/OutlookExpressConfig/OutlookExpressSetup.htm
Whilst it's obviously for Outlook Express it contains all the details you need to configure the mail client. Point 5 has the server details for IMAP access (you typically can't access a web-based email account in an email client).
Bear in mind changes you make on the +iPod touch+ will be reflected when you next log-on into your web-based email or desktop email client.
regards
mrtotes

HELP - My mail and safari don't work

Hello,
I need help. My Mail and Safari where very instable. Sudenly they stopped working. I click in the icons on the bar and they don't open.
yesterday night I did an "Archive and Install" instalation. This instalations just installs the operational system again and leave the rest intact.
It worked perfectly. I went to sleep at 3 AM with everything working.
I woke up and again the mail and safari don't launch.
I did the "Archive and Install" instalation again and the mail worked once and Safari didn't.
I just don't know what to do.
The system I have is OS X 10.3.5
yesterday after installing the system I did the update to 10.3.9
everything worked.
Today when I woke up and they wheren't working again I did the instalations again and didn't upgrade. Didn't work.
Does someone knows about this happening before?
HELP
thank you for any help you can give me
january river

january river,
Welcome to Apple Discussions.
Follow the troubleshooting checklist listed in Multiple applications quit unexpectedly or fail to launch, by Dr. Smoke and let us know what happens.
;~)

I have a mac mini server with leopard, macbook pro, imac and iphone 4 i would like to use the server as the host for all mail, contacts, directories, intranet etc i would like all devices to have mail pushed using outlook as the prefered mail client?

can anyone shed some light on how to do this i am currently using the server as a file storage system but feel it can deliver far more; ideally i would like the following;
email to push to all devices once sent form one device all devices have a copy of the sent item
accounting software that is shared on the server
access the files and directories securely form anywhere
create and host an intranet site
any ideas of how to setup easily or step by step guides
help would be greatly appreciated
regards
rd

Start by getting DNS properly configured. If DNS isn't properly configured, most other services won't work right.
http://labs.hoffmanlabs.com/node/1436
http://labs.hoffmanlabs.com/node/1594
Then, the OS X server documentation will provide a wealth of knowledge on configuring services.
http://www.apple.com/server/macosx/resources/documentation.html

HT5631 how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

I am from Bangladesh. I can't log in with my gmail Apple ID. When I put in the mail and password, and press sign in, it says it has to review on iTunes. Then I am directed to opening a new account. But why should I , since I have one. Plz help :(

I am from Bangladesh. I can't log in with my gmail Apple ID. When I put in the mail and password, and press sign in, it says it has to review on iTunes. Then I am directed to opening a new account. But why should I , since I have one. Plz help

Hi Ishrak,
I apologize, I'm a bit unclear on exactly what you are trying to log into with your Apple ID, or what exactly you are seeing (alert message, directions, etc) when you try to do so. If you continue to have issues with your Apple ID, you may find one or more of the articles linked from the following page helpful:
Apple ID - Apple Support
Regards,
- Brenden

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please!?

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts (it tries but then says call ended) but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please - is there something I need to do to the contacts because tehy came from Outlook? Thanks

Thank you for replying. Yes I deleted the old email address..

HT4623 During my update to the new operating system I am unable to get past Rescue EMail. I tried not putting in another e-mail as it says it is optional - that did nto work. I entered a Rescue E-Mail and it will not allow me to go to the next step. Help

During my update to the new operationg system I am unable to get past the Restore E-Mail. I first chose not to have an "optional" restore e-mail and was unable to get past this section. I then entered an alternate e-mail with the same results. I am unable to get past this section after I push the Next symbol. HELP!

I am having the same problem. I think I saw something about VPN and not being able to communicate with Apple web site. Do you have your protected company email on your phone?

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

Help Please...messed up imac Leopard OS 10.5.8. Lost all my mail and somehow am half in Cloud before realizing. How do I recover all? PLEASE HELP ASAP as I am 74 yrs old and NOT a techie.

I do not know where to start since I am unable to retrieve any mail and somehow, am half in and half out of Cloud. Don't kow what that is but am not so sure I want this at the moment. I simply wish to retrieve everything I cannot access. In other words, I want my old system back. PLEASE, can someone help. I don't know how I will be able to read answers since I do not have email at the moment. Can it be seen on this site? My system is an upgraded Leopard OS X, 10.5.8. What a mess. Can someone please guide me back? Thanks.
Linda

For starters, I don't know why iCloud, if that's what this is, should be at all available. It's meant to run on OSX 10.7/Lion and shouldn't be running on Leopard.
If it's not iCloud, is it a cloud service of some kind offered by your email provider? You'd really have to contact them to sort this out.
If that's not it, I really don't know what to tell you, since I don't understand what happened either.

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Welcome to Apple Communities
Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application

Basic Mail and DNS help

I'm sorry to ask something that I'm sure has been dealt with many times. I've searched all around and found many threads that seem very close, but I guess there's some little difference that always ends up confusing me. I also get confused by what seems to me to be ambiguous terminology. Anyway, I'm pulling my hair out, so I've finally decided to ask for help.
I'm sorry that this post is so long -- I just don't know what bit of info might be important. I'm trying to give a detailed description of my setup so experienced people can give me better advice.
Here's my situation.
EXTERNAL DNS
(1) I've purchased a domain name through my ISP. Let's call it mydomain.tld
(2) This comes with a very rudimentary control panel that allows me to define 10 A records, 10 CNAME records and 10 MX records.
(3) I have defined an A record pointing to my static WAN IP.
(4) I have deifined an MX record pointing to the same static WAN IP.
(5) This seems to be OK, because if I "dig mydomain.com" or "dig MX mydomain.com" I get my static WAN IP.
MY LITTLE NETWORK
(6) The Internet comes into a 4-port router/modem. (192.168.0.x) This is my "Outer LAN"
(7) One port goes to a Mini with SLS -- Say it's on 192.168.0.99
(8) Another port goes to another router (192.168.1.x) This is my "Inner LAN"
(9) I have forwarded port 80 through the outer router to the SLS. That seems to work fine.
(10) I have also forwarded port 25 through the outer router to the SLS. That does not work yet.
The SLS
(11) When I did the initial install, I gave the SLS the name mydomain.private (I some places, Server Admin gives the name mydomain.local ... I don't know why.)
(12) I set up the INTERNAL DNS on the SLS to handle all initial DNS queries from my LANs, with my ISP's DNS as a forwarder.
(13) I set up the DHCP on my routers to assign the internal DNS server on the SLS as the primary DNS, and my ISP's DNS server as the secondary -- so clients on my LANS are looking at the right DNS servers.
(14) DNS seems to work fine on both my LANs.
BEFORE GOING ANY FURTHER:
If anyone sees any problems with what I have done so far -- Please say so.
... and now THE MAIL
(15) I created a few network user accounts on SLS.
(16) Using squirrelmail, they were able to send and receive messages to each other -- using a browser on the SLS machine or a browser on any other computer on the LANs. But this is all resolved through the internal DNS, using mydomain.private
(17) Mail clients (Mail.app) on the LAN can also retrieve these messages. But I can't send mail using a regular mail client ... and squirrelmail only works internally with mydomain.private
Now, I want to get my mail server working normally for sending and receiving mail both within my LAN and over the Internet. And here is where I get confused. There's the EXTERNAL DNS server that clients on the Internet will use to find my server -- and there's the INTERNAL DNS server that clients on my LAN (?and possibly some services on the server itself?) will use. Then there are terms like HOSTNAME and DOMAIN NAME ... and I'm not really very clear as to the disnction (despite, or because of, reading so many articles). I don't know where I should be using mydomain.com and where I should be using mydomain.private)
in the Mail Service Configuration Assistant:
(18) I use mydomain.com for both the Domain Name (Enter the local Internet domain name) and for the Host name (enter the Internet host name of this mail system). These match the A and MX records of my EXTERNAL DNS (ie. what I see on my ISP's control panel).
(19) To try to make things easier to start with, I enabled all options for both secure and non-secure authentication.
(20) I added a host alias mydomain.private
(21) Setup appeared to go fine.
(22) Back on the LAN, "dig MX mydomain.com" gives my static WAN IP
(23) In the outer router, port 25 is forwarded to the SLS
(24) In SLS, in Server Assistant, In DNS, Mail Exchanger is set to mydomain.private -- this works for sending mail within the LAN only.
(25) I tried changing this to mydomain.com, and then nothing worked.
(26) The Nameserver for my primary zone is set to:
Zone: mydomain.private.
Hostname: mydomain.private
When I try to send a message FROM an account on the Internet TO an account on the SLS, I get an error: "Couldn't find a Mail Exchanger or IP address."
When I try to send a message FROM an account on the SLS TO an account on the Internet, the Mail Delivery System returns it to the sender.
Well, that's where I stand now.
I hope people reading will give me some ideas of some other paths to run down, and tests or experiments to try. I'm not afraid of the command line -- but I'm not very experienced with it either -- so maybe there are some useful diagnostic commands that I should know about.
My ISP is not blocking port 80.
Is there some way that I can tell if my ISP is blocking port 25? (Their customer support doesn't know anything.)
Thanks a lot for your attention and patience.
(Intentionally Blank)

Oops. Sorry for the delay getting back to you.
Thanks David_x. That was really helpful information. It opened up more questions, but it gave me some good ideas of things to try.
I reinstalled SLS. This time I used my FQDN and accepted the installer's
David_x wrote:
Firstly, remove the secondary from DHCP. Otherwise clients will 'randomly' use info from either inside or outside DNS. You want them to use the internal DNS so use that alone.
I see. So "secondary" doesn't mean "in case the primary fails" -- it means something more like "another one in the pool of possible DNS servers". Doesn't that present a problem in the event that my server is down? Why is this preferred as opposed to clearly defined prioritized list? (Then there is another issue of some services using mDNSResponder in some cases and resolv.conf -- at least that's fairly well documented.)
DNS & Hostname, etc...
If you want to be able to access services from inside and outside your LAN, using the server's hostname (same one inside and out), then set up your internal DNS using your .com domain, same as is used externally.
Okay. Got it. I did that with the reinstall.
DNS is only an "IP lookup" system so you want the hostname inside to resolve to your LAN IP and the hostname outside to resolve to your WAN IP. Forget about the .private stuff - it just confuses things.
Okay. Thanks.
Public MX Record…
(3) I have defined an A record pointing to my static WAN IP.
(4) I have deifined an MX record pointing to the same static WAN IP.
The above may not be what you meant to say but just to check… Your public MX record should resolve to your A record hostname. Then the hostname resolves to an IP address. Your MX record should not be pointing directly to an IP address.
Yes. You are right. That's very good of you to point that out. I did have it pointing to an IP address. (My ISPs simplistic DNS control panel is in Spanish, and I was confused about whether "nombre" referred to a name or number.) I had discovered this through brute force trial and error. This sort of thing was very difficult to test, since I don't have control over many of the DNS parameters (like TTL). That was probably my main problem. Now I can send and receive mail from my server to outside accounts, and from outside accounts to my server.
At the moment, I can't retrieve mail on my server from a computer outside of my network. I suppose that's an authentication problem, or a hostname alias or something. I'll continue trying different things.
Testing Port 25...
To see if port 25 is blocked, get an outside computer and "telnet your-wan-ip 25". If you can switch on logging at the firewall for your port-forwarding rule, all the better as this will be only sure way to see that it is reaching the WAN firewall.
By "logging at the firewall", I suppose you mean at the router? Alright. I still have to try this. From my point of view, this kind of suggestion is great advice.
Instead of using an outside computer, would it be possible to do this sort of checking using an anonymizing proxy? I suppose they usually don't allow telnet.
...any chance this could be tested from my "inner" LAN? (My guess is that it needs to be from a computer that is "upstream" relative to the "outer" router. I'm under the impression that routers handle upstream connections differently than downstream connections, this wouldn't work.)
After that, test at server... open Terminal and enter: "tcpdump -v tcp port 25"
Tcpdump will listen on port 25. When the telnet session gets port-forwarded, you will see a listing of information about the packet received. If you get nothing then the port-forwarding is not working.
So, to make sure I've got this straight:
Turn on logging on port 25 in my outer router.
Go to Terminal on my server.
Start tcpdump listening on port 25.
Take my netbook out to some WiFi hotspot (for example).
Telnet into my server.
Come home and check my logs.
(Maybe I should check out this VPN stuff.)
I'm looking to see that the router forwarded the port correctly.
That's great trouble shooting advice.
Now you'll see how slow I am. I'm reading along, running through all of this in my head, imagining all of my steps ... And only now do I realize that if (as of my latest experiments) my server has been able to receive mail from outer accounts -- then the router must be forwarding things and the mail server is, to some extent, working fine. Okay. I'm still going to go through these steps anyway to see what it should look like.
Server Admin: Domain Name & Hostname...
The Domain Name is just your domain name... e.g., mydomain.com
The Hostname is ideally the same as your external MX hostname... e.g., mail.mydomain.com
The main thing about the Hostname is that this is what your server will report as it's HELO name to other connecting mail servers. Some will check this against the public MX record and use any discrepancy to increase likelihood of spam filtering.
Is there really any reason that a small setup like mine should use "mail.mydomain.com" instead of just "mydomain.com". Since I don't have a separate machine dedicated to mail, maybe it's just an unnecessary complication. I was just copying what I've seen around (configuration for mail and articles I've read).
Under Advanced-> Hosting, tick the "Include server's domain as local host alias".
Okay. What exactly does this do? I understand the words, but not the sense of the phrase. (I find this happening a lot.)
Checking Server Settings…
Use a terminal session to debug any basic configuration issues on the server. The error responses are much more informative than just using a mail client. Open Terminal in a local computer… "telnet server-lan-ip 25" and carry out following…
I could connect with telnet to port 25 on the server:
(1) From a remote computer.
(2) From a local client.
(3) From the server
As we step through the experiment, you will see that we have a few problems.
Server Response:
Trying...
Connected to fqdn.or.ip.
Escape character is '^]'.
220 fqdn.or.ip ESMTP Postfix
#1. Declare where you are sending the email from:
HELO something.name
You can use a real hostname but the mail server has no choice but to accept whatever you type.
Response: 250 servers.hostname
So far, so good.
On remote computers, I couldn't get any further than this.
I'll try again tonight.
#2. Give senders address:
MAIL FROM:<mail@senderdomain>
Response: 250 Ok
I could get this to work for either a local email account or a remote email account, from telnet sessions initiated either on the server itself or on a local client.
#3. Give recipients address:
RCPT TO:<mail@otherdomain>
Response: 250 Ok
Here, I did not get consistent results.
From a local account to a remote account, I could get "Relay access denied".
From a local account to a local account, I could get "Recipient address rejected. Service is unavailable. But this was not consistent. I used three different local accounts, and all could send or receive at one time or another.
#4. Start composing the message:
DATA
Response: 354 End data with <CR><LF>.<CR><LF>
#5. Type a message. Finish with a single "." on a line on it's own.
Response: 250 Ok: queued as dah,de,da
#6. Close the connection by typing: QUIT
Response:221 Bye... Connection closed by foreign host.
suggestion for hostname.
Were you going to add something else here?
Well, any comments or insights that you might add will be very much appreciated. I'm going to continue sending and receiving and making little tweaks. It's really pretty confusing for a newbie. I thank you a lot for all the time you spent reading and helping me.
(Intentionally Blank)

Help w/ E-mail and Director

Similar Messages

Maybe you are looking for