HELP when i turn on my n86 8mp suddenly asked the ...
when i turn on my n86 8mp suddenly asked the security code that doesn't matches with original.
i changed the defaul security code with mine, but now the phone does not recognize it.
I made no mistakes, I remember exactly the code I changed.
is possible that the phone has forgotten the code?
The new code I entered, was 16 characters, so very long.
Now how i can unlock my nokia n86 to turn it on?
ITALIAN TRASLATION
HELP AL RIAVVIO CHIEDE IL CODICE DI PROTEZIONE CHE NON E' PIU QUELLO DA ME MESSO:
no , non l'ho dimenticato..e non è quello di default 12345 o 0000.
come posso accendere il telefono ora?
al nokia point mi hanno chiesto 35 euro (ovviamente li ho mandati a **bleep**...) per sbloccarlo mi hanno detto che probabilmente io ho pensato di mettere un codice ma in realtà ne avrei inserito un altro che non ricordo , magari digitando un carattere per un altro ma non può essere cosi perchè il codice che ora non è riconosciuto l'ho usato già altre volte senza problemi .
ci sarà una soluzione piu economica o fai da te??
il mio codice di protezione è un codice di 16 caratteri è possibile che il telefonino perda qualche dato in caso di pwd cosi' complesse dimenticando il codice?
per favore aiutatemi , questo n86 inizia davvero ad essere un telefono troppo incasinato
Your Nokia device is equipped with one or more codes to protect it against unauthorized use. Note that the security code, which protects the Nokia device itself, differs from the PIN code, which protects the SIM card.
If your Nokia device prompts you for a security code and you have not changed it before, enter the default security code: 12345. If it still requests a security code, bring it to the nearest Nokia Care point for inspection.
Note:
• Some operators configure Nokia devices so that they only work with their brands' SIM cards. if you enter the wrong code three or more consecutive times, the device may lock permanently. If this happens, contact your operator or service provider for assistance.
• In other cases when you enter the wrong code three or more consecutive times, the device switches to a sleep mode and does not accept any entries for the next 15 minutes. Power the device off and then back on, keep it in idle state or untouched for 15 minutes, try again or bring it to a Nokia Care point.
Similar Messages
-
i bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!
You need to Set Up the iPad... Connect it to iTunes...
See here for Getting Started...
http://www.apple.com/support/ipad/
and here...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf -
when i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!
Try:
iOS: If you can't back up or restore from a backup in iTunes -
WHEN I TURN MY IPHONE 3S ON IT ASKS ME TO CONNECT TO ITUNES AND RESTORE. I HAVE DONE THIS 10 TIMES AND STILL GET THE SAME SCREEN. CAN ANYONE PLEASE HELP??
Has your phone been jailbroken? If so, you will likely never get it to work again.
You can try placing your phone in DFU mode (search google) and restoring. -
need help , when we turn on the mac i can hear the fan and there is a picture of the world flashing for about a minute or 2 on start up . But the fan I can hear non stop ?
A flashing question mark or globe appears when you start your Mac
-
My iphone 4 turned off yesterday very randomly. I had 88% battery when it turned off. I plugged it into the wall and it said i had no battery, then the apple came up as if it was turning on. It went black again and this keeps repeating over and over. Any help please ?
Battery could be at EOL. Try getting it replaced.
-
when I turn on my MacBook Pro, I hear the startup chime, and the fan running. The screen is black and there are no lights on the keyboard. I tried resetting PRAM, but still will not start. Running OS X Mavericks 10.9.1 and recently download new OS. Serial number is C0****W47. How do I bring my screen back?
<Peronal Information Edited by Host>After a while I heared something about pressing the return key for english. But when I pressed the ruturn key, nothing happened.
-
when i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ??? please i need help with this and how can i fix it
Here is some pertinent information and how-to's from Apple:
http://support.apple.com/kb/TS2570
Post back if these troubleshooting steps do not work. -
I accedantly fomated my iphone using find my iphone app, now when i turned it on it keeps giving me the massage ( your iphone culdnot be acctivated coz the activation server is temporarily unavailable... ext)
HELP ME PLEASE!!!!If you don't have a SIM in it, insert a SIM. A SIM is REQUIRED to activate it.
If it was hacked to unlock it previously, go buy a phone you can use. -
Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo. Tried reset option/troubleshoot several times. Also wont show up on computer at all when I plug in to USB.
Any tips are very much appreciated.Place the iPod Touch into DFU mode. This will be similar to what the factory would do to install the iOS onto new iOS devices.
Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
To place your iOS device into DFU mode.
First connect you iOS device to you computer.
Open iTunes if not already open
Now turn off your iOS device using the power swipe.
Press the home and sleep button on your iOS device for 10 seconds.
Release the sleep button but carry on holding down the home button. For another 10 seconds.
Your iOS device should now be on DFU. Click on restore and iTunes will download the latest iOS for your device.
Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it) Or go into an Apple Store. -
Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over.
Hi The next thing to do is to Restore back to Factory Settings this will get rid of any bugs . After Restore use same Apple ID /Password then you should get all your Apps & data back If you still have this problem make an Appointment at Apple Store . Cheers Brian
-
Hello everyone, My iphone 5 runs IOS7. It can only rotate when the iphone is already in the sideways, but can not rotate up itself when I turn iphone up. I must tap the assistive touch button to rotate it. This is inconvernient for me.How can I fix?
Took my phone to the Apple store this week and they told me it was a hardware/screen malfunction. They replaced the screen for free since it was under warranty. Now it works fine again!
-
If I sent an iMessage, then it told me it didn't deliver so I pressed send as text then I turned iMessage off.. When I turn it on will it re send the iMessage that was undelivered or not?
Turn off iMessage and Facetime. Put phone on airplane mode. Turn on iMessage then facetime and retry sending. You can also try turning off your phone instead of airplane mode as well.
Make sure for imessage to work there must be data such as cellular data on or wifi. -
When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David
Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H. -
I have an imac 27" 6 months old. When i turn it on after 20-25 mnts the screen gets vapourized. After an hour it gets cleared. How serious is it ?
Contact Apple Service, iMac Service or Apple's Express Lane and get it repaired/replaced. I had the display on my 27" iMac go south three months after buying it and they replaced it due to a similar fault. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.
Maybe you are looking for
-
Accessing a public array from extra class.
I am trying to access a public array that I declared in my main class from a separate class. I am a bit confused about why this is not working. The method search in the extra class is called in the extra class in part one of the nextKeystream method.
-
Ipod formatted windows need to use on a mac
I recently purchased a used ipod 4th generation 20 gb and it doesn't show up on my mac. I noticed it is formatted to windows and I will just be using it on a mac. I tried to restore it to factory setting but when I do I get a warning the "The iPod co
-
Int dereferencing error when transforming 2d array
Int WorkArray = new Int[9]; WorkArray.set( new int[] { 6, 3, 0, 7, 4, 1, 8, 5, 2 } ); for( Tloop = 0; Tloop <= 8; Tloop++ ) TransForms[0][Tloop].set( WorkArray.getValueAt( Tloop ) ); }I get the "Int Cannot be Derefe
-
TS1474 iTunes/USB sync problem with iPhone 5
Syncing my iPhone 5 to iTunes via USB has gotten very, very slow in the last few days and since yesterday my calendar hangs and does not sync. Possible solutions?
-
How to view the employee image in Selfservice?
Hi firends, I'm trying to view the employee image in Selfservice. The idea is the following: - When we enter in Preferences Menu --> Person Search Menu - Then Customize for HR User --> Level : Responsability (we choose a responsibility associed to Pr