Help with #2170 error: tried suggested solutions, still not working

Hi,
I have a xcelsius movie which calls a web service that is located (in the same directory) on the same server as the movie. The web service makes a call to a remote database. I have tried following the suggested solutions of changing the flash security settings on the web server and placing a crossdomain.xml file in wwwroot directory of the web server. Both have not fixed the error. Does calling a remote database have anything to do with my inability to fix this problem? The web server is running windows server 2008 and the database server is running windows server 2003 with sql server 2000 as the database. The movie and web service are in a virtual directory of IIS. Any help would be much appreciated.
Thanks,
Jacob

I did some more testing and seemed to have figured out my problem. In my movie I referenced my WSDL url using localhost. I changed this and the error went away.

Similar Messages

Help with the error message that ADE is not allowed to copy a book onto my Nook. I have tried authorizing and unauthorizing many times--at wits end with this issue.

Help with the error message that ADE is not allowed to copy a book onto my Nook. I have tried authorizing and unauthorizing many times--at wits end with this issue.

I too am having the same problem. I have a new hard drive that was imaged from the old one and I'm trying to side load a book to my Nook Simple Touch.. I first installed ADE 4 then borrowed and downloaded a book from Overdrive. I tried a few times to delete and reauthorize both the computer and the Nook and each time I get an authorization error when I try to side load the book. I then found on the Nook forum that the Simple Touch and ADE 4 don't get along. So I uninstalled ADE 4 and installed ADE 3.
I then followed this recommended procedure found on the forum: I deleted the Digital Editions folder from my Nook, launched ADE 3 and authorized the computer, then connected the Nook. For a few seconds, hovering the mouse over the setting icon for the Nook displayed everything on the context menu grayed out. But then it showed the context menu and I was able to display the Nook's authorization, which was the same as the computer's. Still get the same error side loading the book. Deleting and reauthorizing doesn't help. And the Digital Editions folder is still missing from the Nook.

Unable to view thumbnails in PSE13 only show as hourglass. Tried reinstalling software still not working.

Unable to view thumbnails in PSE13 only show as hourglass. Tried reinstalling software still not working.
Any suggestion?

Thanks Barbara - Tried that but still nothing. The only way I can view is by double clicking each image.

Unplug stopped working this past week so I downloaded 2.052 like suggested and still not working.

Have enjoyed Unplug and all of a sudden this past week it stopped working completely, not only on YouTube but Vimeo too. Updated like suggested but still not working.

Please contact the developer by email at [email protected] as this is an add-on and not a Firefox issue.

When I try to FaceTime somebody they will pick up but when it tries to connect it says FaceTime ended I've tried it with multiple people and it is still not working

Hi I have a iPod touch 4th generation an whenever I FaceTime somebody or I receive a FaceTime call and one of us answers it tries to connect but ends the call I have tried it with different people an I know that I am connected to wifi please help

Other people have made the same post you have made. You can also find more with a google search.
FaceTime Not Working for Many iOS 6 Users
FaceTime Suffers Outage For Countless iOS 6 Users, Apple ...
FaceTime connectivity issues reaching many iOS users
iOS 6 Users Suffer Major FaceTime Outage | Cult of Mac
FaceTime Not Working for Many iOS 6 Users - Mac Rumors
iOS 6 Users Are Reporting FaceTime Issues | MacTrast

Help with ipod classic 80gb 2nd new ipod not working

I need some help with my ipod, this is the second ipod I have had in the same number of weeks the first one worked fine for about 8 days and then when syncing one night it froze and then would not disconnect, I searched the support section and worked how to reset the ipod which | did many times, in the end I restored the ipod to the factory settings and synced again the end result of this was that the ipod would not turn on despite everything that I tried. The apple log would appear and the ipod would then try desperatley to switch itself on with the apple logo appearing and disappering all the time. Apple have replaced the ipod and I have fully charged the new ipod synced it this evening all was ok, the ipod synced and then told me to disconnect and the same thing is happening again I have tried to reset multiple times and all that happens now is the apple logo appears and disappers it will not switch on or off, itunes keeps telling me that it cannot recognise the ipod at this time and the safely remove section on my task bar on my computer is telling me that the ipod has malfunctioned. can anyone help? am I doing something wrong someone suggested that I should have downloaded itunes once I had my ipod and not before, I have about 20GB of music in itunes and I was not aware that you needed to use or own an ipod to use this music storage system
HELP
Thanks in anticipation

well it looks like you might have a tech issue here; try to return the ipod and choose a different store and buy one ... also try to uninstall itunes totally, back up your songs on a CD or DVD, and then re-install a fresh new copy of itunes ... this might work ... good luck!

Finding on which line the error has occured! still not working~ desperate!

I have a problem with error handling when transforming XML with XSL file.
If I have XSLT file like below
<xsl:template match="/">
<html><body>
<xsl:apply-templates/>
</body></html>
</xsl:template>
and I just change the last line "</xsl:template>" to "</xsl:template" to allow the exception return the line number of where error is occurred (in this case error is missing '>' bracket)
What I want to find is the exact line number where the error has occured.
part of my java code looks like below
catch( TransformerConfigurationException tce )
// Error generated
JOptionPane.showMessageDialog( null, "ERROR1"+tce.getLocator().getLineNumber());
The above code does not work properly because getLocator() method returns a null value...
I also checked whether getLocator() really returns null so I did this
if( tce.getLocator() == null )
System.out.println( "it is null indeed" );
and found out it DOES return 'null'.
Could you please tell me why it is returning null and how I can get around to get the line number of where error has occurred? PLEASE!!!!!!!!!!!!!!!

The reason is probably that your exception
is TransformerConfigurationException i.e.
the transforming process has never been started
because your transformer is not configured properly.
That means that no SourceLocator exists...
Check what
System.out.println(tce.getMessage());
says.
Kullervo

Trying to put pics on a flashdrive and keep getting error that there is not enough free space when there is. I tried to empty trash with the flash drive in but still not working. Help!

Trying to copy photos in folder on desktop to a flash drive but keep getting error that there is not enough free space when there is. I read to delete trash with the flash drive in but that still doesn't work. Help!!

How is the flash drive formatted? Open Disk Utility (Applications>Utilities) and see how it's formatted - that might be the problem.
Clinton

I wanted to sync my ipod to my itunes but it went all black and then they say it is in recuperation mode ? then error 1604 appears and i tried everything and still not working what can i do ?

and now i can't use my ipod because there's this picture of itunes like i should connect it ...

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Itunes/Iphone/Ipod device driver issues - tried everything. Still not working.

After hours and hours of research, I'm completely stuck. Here's the basic problem.
When I plug in my Iphone to my laptop, windows pulls up a little window that says installing device driver software. After several minutes, the process fails and a message comes up that says windows found drivers for my device, but encountered an error and wasn't able to install them. In the device manager, the iphone is listed as an "other device" with a yellow triangle/exclamation point. Itunes never recognizes the device.
When I plug in my ipod nano 4th generation, the exact same thing happens, except it's listed in the device manager as an ipod. (same yellow triangle though.)
Up until today, both of these devices have been working properly, syncing without trouble. The iphone synced wirelessly and the ipod every time I plugged it in. I can't figure out what on earth happened to my laptop today that messed things up.
It's also worth noting that I have another older ipod nano... second generation, I think, that plugs in and is recognized immediately, works perfectly.
Here is what I've done so far:
1. I worked through every single troubleshooting guide that Apple has to offer. No change.
2. I did a complete clean install of itunes and all additional components, rebooted and reinstalled. No change.
3. I uninstalled/re-installed usb controllers in the device manager. No change.
4. reset both the phone and the ipod. No change.
5. I've tried various cables. No change.
6. I've run system checks and repair utilities for windows vista.
7. I've used selective start up to see if another program is interfering. I've stood on my head and counted to one hundred. I've only said seventeen swear words.
At this point I've done so much searching and troubleshooting, I can't imagine how anything is going to fix this issue. So this is my last hope. Please oh please be smart enough to tell me what to do...

Not sure if this is significant, but in a weird turn of events, when I tried plugging the ipod in this morning, the little message that pops up to install device driver software actually told me the drivers were installed successfully. However, in the device manager, it still says the drivers are NOT installed properly, the little yellow triangle is still there and the ipod still isn't registering in itunes, or my computer. So. Not really any improvement, but a different symptom none the less?
I'm desperate, guys. Someone help?

Help install Adobe Air tried the terminal fix- Not working

I own a lot of Adobe products including Creative Suite Design Premium. I have tried downloading Adobe Air to no avail.
I eventried
manual solution to Adobe AIR not installing: Didn't work. Can anyone help? Here is the log file from the attempt.
Sep 24 21:09:27 macintosh /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[2532]: Launching subprocess with commandline /bin/chmod -fRP +rw "/Users/tanya_mac_laptop/Library/Application Support/Adobe"
Sep 24 21:09:28 macintosh /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[2532]: Starting silent runtime install. Installing runtime version 2.7.1.19610
Sep 24 21:09:28 macintosh /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[2532]: Error occurred during copy operation; beginning rollback: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #1" errorID=1]
Sep 24 21:09:28 macintosh /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[2532]: Error during rollback ignored: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #3003" errorID=3003]
Sep 24 21:09:28 macintosh /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[2532]: Rollback complete
Sep 24 21:09:28 macintosh /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[2532]: Exiting due to error: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #3003" errorID=3003]
Sep 24 21:09:28 macintosh /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[2523]: Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Error #3003" errorID=3003]
Sep 24 21:09:28 macintosh /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[2532]: Runtime Installer end with exit code 7
Sep 24 21:09:31 macintosh /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[2523]: Runtime Installer end with exit code 7
Sep 24 21:09:31 macintosh com.apple.launchd.peruser.501[151] ([0x0-0xd30d3].com.adobe.air.Installer[2523]): Exited with exit code: 7
Thanks in advance.
Tanya Metaksa

Could you try manually deleting the following folder: /Library/Frameworks/Adobe AIR.framework ? Once deleted, try installing again.
Thanks,
Chris

HT5569 Tried this but still not working and unable to load Itunes iOS: Wi-Fi settings grayed out or dim Symptoms In rare instances, the setting to turn on Wi-Fi on your iPhone, iPad, or iPod touch may appear grayed out or dim. You may see the following w

Tried the below and still no good - any suggestions
iOS: Wi-Fi settings grayed out or dim
Symptoms
In rare instances, the setting to turn on Wi-Fi on your iPhone, iPad, or iPod touch may appear grayed out or dim. You may see the following when you tap Settings > Wi-Fi.
If this occurs, you can't turn Wi-Fi on, and when you try to turn Wi-Fi on, your device won't respond. If you're using iOS 7, Wi-Fi may appear to turn on and off in Control Center, but Wi-Fi won't respond.
Resolution
Follow these steps to resolve the issue:
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
Last Modified: Dec 9, 2013

Your device has a hardware failure and only replacement or repair will fix it. Take it to an Apple Store or an Apple authorized service provider.

TS1277 I've followed these steps to fix this issue with windows vista but it's still not working...any other ideas to fix this?

little help?

I've followed all the Apple support steps
Uninstalled & reinstalled iTunes
Tried to change all my permissions & deleted re-added users
I keep getting this message when ever I open iTunes:
"The folder iTunes is on a locked disk or you do not have write permission for this folder".

Erratic mouse on brand new Air - tried other advise still not working

Hi
I have a brand new MacBook Air which has worked fine for last 48 hours - but thsi morning I have the erratic behaviour seen in others posts. I have followed advise posted by Linc Davis in other posts - but no luck .. I have a wonderful new Air which is unusualable !! .. really not used to this with Macs, thats why I stopped using Windoze!!
Help !
Thanks
Simon

Your MBP is under warranty, bring the MBA to be fixed at an Apple store genius bar. Also if you purchased it from Apple and are within 14 days from the purchase date you can have it exchanged.
Ciao.

How do I embed a pdf document into an existing pdf so that the user double clicks on the pdf object within the pdf and it opens? i've looked everywhere on various forums and tried attachments - but still not working. Thanks

I've tried various methods but to no avail. I have a pdf document and within the pdf I'd like to embed a couple pdf documents so that all the user has to do is double click on the pdf object inside the pdf and it opens in a new window. I've tried using attachments to do it and linking it...but to no avail. Anyone know how to do? I'm using Acrobat Pro Version 11. Thanks

The "embed" feature common to MS Office applications is not applicable to PDF (for the why and wherefore of PDF get comfortable and read the ISO Standard for PDF - ISO 32000-1:2008).
You can insert other PDF files' pages into any given PDF.
You can attach files of supported formats to a PDF (of course a PDF is supported).
You cannot "embed". So, nothing is broken.
Be well...

Help with #2170 error: tried suggested solutions, still not working

Similar Messages

Maybe you are looking for