Help with a JavaScript Warning

I have created a form that added fields into total fields. The total fields are then added together. In another part of the form there is addition and subtraction that gives another total. If these two totals do not equal then a number is plugged into one of two fields Over or Short according to which be the case. My problem is that all of these fields are set for the number format with 2 decimal places but as soon as you enter the last number the warning
"The value entered does not match the format of the field [Over] and if you click enter another message with the same wording just for Short comes up. This happens when there is no offage. It does not happen if there is a number to plug in the short or over fields.
At this time it does not recalculate and the numbers that should have changed to 0 stays in place. This causes the ending total to be off.
There is a custom validation to not show negative numbers. The validation that is keyed is as follows:
// null field if number is negative
if (event.value<0) event.value="";
This script is keyed into the over and short fields.

The fields involve are totals of currency. There are 4 columns that are added together to come up with a TotalCash sum. In another area I have a field named OldBalance that together with a field named CashIn(+) and CashOut(-) gives the sum of NewBalance. The sum of NewBalance should equal the Sum of TotalCash if not then either the Over or the Short field should have a sum plugged, therefore; Over or Short can not show a negative number or sum a negative number.
The calculations for the NewBalance is correct. The calculation for TotalCash is correct. The problem is that when you plug the number into CashOut the error messages comes up. If you answer ok to the 2 error messages and then delete the numbers in the over or short field the Total field is correct. If not the number that should have cleared when entering the CashOut field stays and caused the Total field to be out of balance. I should add that if the sheet is out of balance that it will not let you clear the field.
I tried changing the format to none and the same errors popped up.

Similar Messages

Help with message please: Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line

I would really appreciate some help with my search & results page that is now throwing up the following error:
Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line (the line number refers to the following code:
mysql_free_result($RSsearchforsale);
mysql_free_result($RsSearchForSale2);
mysql_free_result($RsSearchForSale3);
mysql_free_result($RsSearchForSale4);
I am new to php and am setting up a dynamic site in Dreamweaver (thanks to the Missing Manual – very helpful). I apologise in advanced for my lengthy description of the problem (perhaps get yourself a drink before continuing!)
I have a Search page with 4 list menus where the user can select an option from ANY or ALL of the menus, if a menu is not selected the value posted to the results page will be 'zzz'.
On the results page I have 4 recordsets, all getting the correct results, only one recordset is required to run depending on how many of the menus from the search page have been selected and a test is run before executing the sql using a SWITCH statement checking how many of the menus had passed the 'zzz' values from the Search page if you see what I mean. The results page has Repeating Regions, Recordset Paging and Display Record Count. The exact result that I require are generated by this method.
THE PROBLEM, when a user makes a selection the first page of 10 results is fine, but the error message above is shown at the bottom of the page, AND when the user clicks NEXT to go to the next page of results THERE ARE NO RESULTS.
This is exactly what happens depending on how many menus selected and which recordset is used:
4 menus selected from Search: runs RSsearchforsale, results correct but 3 error messages on 1st page relating to mysql_free_result($RsSearchForSale2),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct results found. NEXT page is empty of results and still shows the correct display record count as if it should be displaying the records, also has the same 3 error messages.
3 menus selected from Search: runs RsSearchForSale2, results correct but 3 error messages on 1st page relating to mysql_free_result($RSsearchforsale),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct number of results. NEXT page shows results from the DEFAULT setting of the recordset and the Display record count reflects this new set of results. Also still shows the 3 mysql_free_results for RsSearchForSale2, 3 and 4.
2 menus selected from Search: runs   RsSearchForSale3, results correct but 2 error messages on 1st page relating to mysql_free_result($RSsearchforsale) & mysql_free_result (RsSearchForSale4). The display record count is correct. NEXT page does exactly the same as described in above 3 menus selected.
1 menu selected from search: runs RsSearchForSale4, results correct but 1 error meaasge on 1st page, mysql_free_result($RSsearchforsale). Display record count is correct and again when NEXT page is selected does as described in above where 2 or 3 menus selected.
If you have gotten this far without falling asleep then thank you and well done! I have pasted my code below and I know its a lot to ask but please please can you give me an idea as to where or why I have gone wrong. I felt I was so close at perfecting this search and have been working on it for weeks now. I feel sure the problem is because I have 4 recordsets on the page but I could find no other way to get the exact results I wanted from the menus.
Looking forward to any help.
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RSsearchforsale = 10;
$pageNum_RSsearchforsale = 0;
if (isset($_GET['pageNum_RSsearchforsale'])) {
$pageNum_RSsearchforsale = $_GET['pageNum_RSsearchforsale'];
$startRow_RSsearchforsale = $pageNum_RSsearchforsale * $maxRows_RSsearchforsale;
$varloc_RSsearchforsale = "mpl";
if (isset($_POST['location'])) {
$varloc_RSsearchforsale = $_POST['location'];
$vartype_RSsearchforsale = "vil";
if (isset($_POST['type'])) {
$vartype_RSsearchforsale = $_POST['type'];
$varprice_RSsearchforsale = "pr9";
if (isset($_POST['price'])) {
$varprice_RSsearchforsale = $_POST['price'];
$varbed_RSsearchforsale = "b5";
if (isset($_POST['beds'])) {
$varbed_RSsearchforsale = $_POST['beds'];
switch (true) {
case ($varloc_RSsearchforsale != 'zzz' && $vartype_RSsearchforsale != 'zzz' && $varprice_RSsearchforsale != 'zzz' && $varbed_RSsearchforsale != 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RSsearchforsale = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s AND price=%s AND type=%s AND beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc_RSsearchforsale, "text"),GetSQLValueString($varprice_RSsearchforsale, "text"),GetSQLValueString($vartype_RSsearchforsale, "text"),GetSQLValueString($varbed_RSsearchforsale, "text"));
$query_limit_RSsearchforsale = sprintf("%s LIMIT %d, %d", $query_RSsearchforsale, $startRow_RSsearchforsale, $maxRows_RSsearchforsale);
$RSsearchforsale = mysql_query($query_limit_RSsearchforsale, $propertypages) or die(mysql_error());
$row_RSsearchforsale = mysql_fetch_assoc($RSsearchforsale);
if (isset($_GET['totalRows_RSsearchforsale'])) {
$totalRows_RSsearchforsale = $_GET['totalRows_RSsearchforsale'];
} else {
$all_RSsearchforsale = mysql_query($query_RSsearchforsale);
$totalRows_RSsearchforsale = mysql_num_rows($all_RSsearchforsale);
$totalPages_RSsearchforsale = ceil($totalRows_RSsearchforsale/$maxRows_RSsearchforsale)-1;
$queryString_RSsearchforsale = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RSsearchforsale") == false &&
        stristr($param, "totalRows_RSsearchforsale") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RSsearchforsale = "&" . htmlentities(implode("&", $newParams));
$queryString_RSsearchforsale = sprintf("&totalRows_RSsearchforsale=%d%s", $totalRows_RSsearchforsale, $queryString_RSsearchforsale); } ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale2 = 10;
$pageNum_RsSearchForSale2 = 0;
if (isset($_GET['pageNum_RsSearchForSale2'])) {
$pageNum_RsSearchForSale2 = $_GET['pageNum_RsSearchForSale2'];
$startRow_RsSearchForSale2 = $pageNum_RsSearchForSale2 * $maxRows_RsSearchForSale2;
$varloc2_RsSearchForSale2 = "mpl";
if (isset($_POST['location'])) {
$varloc2_RsSearchForSale2 = $_POST['location'];
$varprice2_RsSearchForSale2 = "p9";
if (isset($_POST['price'])) {
$varprice2_RsSearchForSale2 = $_POST['price'];
$vartype2_RsSearchForSale2 = "vil";
if (isset($_POST['type'])) {
$vartype2_RsSearchForSale2 = $_POST['type'];
$varbed2_RsSearchForSale2 = "b5";
if (isset($_POST['beds'])) {
$varbed2_RsSearchForSale2 = $_POST['beds'];
switch (true) {
case ($varloc2_RsSearchForSale2 == 'zzz'):
case ($varprice2_RsSearchForSale2 == 'zzz'):
case ($vartype2_RsSearchForSale2 == 'zzz'):
case ($varbed2_RsSearchForSale2 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale2 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s AND type=%s) OR (location=%s AND price=%s AND beds=%s) OR (location=%s AND type=%s AND beds=%s) OR (price=%s AND type=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"));
$query_limit_RsSearchForSale2 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale2, $startRow_RsSearchForSale2, $maxRows_RsSearchForSale2);
$RsSearchForSale2 = mysql_query($query_limit_RsSearchForSale2, $propertypages) or die(mysql_error());
$row_RsSearchForSale2 = mysql_fetch_assoc($RsSearchForSale2);
if (isset($_GET['totalRows_RsSearchForSale2'])) {
$totalRows_RsSearchForSale2 = $_GET['totalRows_RsSearchForSale2'];
} else {
$all_RsSearchForSale2 = mysql_query($query_RsSearchForSale2);
$totalRows_RsSearchForSale2 = mysql_num_rows($all_RsSearchForSale2);
$totalPages_RsSearchForSale2 = ceil($totalRows_RsSearchForSale2/$maxRows_RsSearchForSale2)-1;
$queryString_RsSearchForSale2 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RsSearchForSale2") == false &&
        stristr($param, "totalRows_RsSearchForSale2") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RsSearchForSale2 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale2 = sprintf("&totalRows_RsSearchForSale2=%d%s", $totalRows_RsSearchForSale2, $queryString_RsSearchForSale2);
}?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale3 = 10;
$pageNum_RsSearchForSale3 = 0;
if (isset($_GET['pageNum_RsSearchForSale3'])) {
$pageNum_RsSearchForSale3 = $_GET['pageNum_RsSearchForSale3'];
$startRow_RsSearchForSale3 = $pageNum_RsSearchForSale3 * $maxRows_RsSearchForSale3;
$varloc3_RsSearchForSale3 = "mpl";
if (isset($_POST['location'])) {
$varloc3_RsSearchForSale3 = $_POST['location'];
$varprice3_RsSearchForSale3 = "p9";
if (isset($_POST['price'])) {
$varprice3_RsSearchForSale3 = $_POST['price'];
$vartype3_RsSearchForSale3 = "vil";
if (isset($_POST['type'])) {
$vartype3_RsSearchForSale3 = $_POST['type'];
$varbed3_RsSearchForSale3 = "b5";
if (isset($_POST['beds'])) {
$varbed3_RsSearchForSale3 = $_POST['beds'];
switch (true) {
case ($varloc3_RsSearchForSale3 == 'zzz' && $varprice3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($vartype3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz' ):
case ($varbed3_RsSearchForSale3 == 'zzz' && $varloc3_RsSearchForSale3 == 'zzz'):
case ($varloc3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale3 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s) OR (location=%s AND type=%s) OR (location=%s AND beds=%s) OR ( type=%s AND beds=%s) OR (price=%s AND type=%s) OR (price=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"));
$query_limit_RsSearchForSale3 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale3, $startRow_RsSearchForSale3, $maxRows_RsSearchForSale3);
$RsSearchForSale3 = mysql_query($query_limit_RsSearchForSale3, $propertypages) or die(mysql_error());
$row_RsSearchForSale3 = mysql_fetch_assoc($RsSearchForSale3);
if (isset($_GET['totalRows_RsSearchForSale3'])) {
$totalRows_RsSearchForSale3 = $_GET['totalRows_RsSearchForSale3'];
} else {
$all_RsSearchForSale3 = mysql_query($query_RsSearchForSale3);
$totalRows_RsSearchForSale3 = mysql_num_rows($all_RsSearchForSale3);
$totalPages_RsSearchForSale3 = ceil($totalRows_RsSearchForSale3/$maxRows_RsSearchForSale3)-1;
$queryString_RsSearchForSale3 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RsSearchForSale3") == false &&
        stristr($param, "totalRows_RsSearchForSale3") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RsSearchForSale3 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale3 = sprintf("&totalRows_RsSearchForSale3=%d%s", $totalRows_RsSearchForSale3, $queryString_RsSearchForSale3);
} ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale4 = 10;
$pageNum_RsSearchForSale4 = 0;
if (isset($_GET['pageNum_RsSearchForSale4'])) {
$pageNum_RsSearchForSale4 = $_GET['pageNum_RsSearchForSale4'];
$startRow_RsSearchForSale4 = $pageNum_RsSearchForSale4 * $maxRows_RsSearchForSale4;
$varloc4_RsSearchForSale4 = "mpl";
if (isset($_POST['location'])) {
$varloc4_RsSearchForSale4 = $_POST['location'];
$vartype4_RsSearchForSale4 = "vil";
if (isset($_POST['type'])) {
$vartype4_RsSearchForSale4 = $_POST['type'];
$varprice4_RsSearchForSale4 = "p9";
if (isset($_POST['price'])) {
$varprice4_RsSearchForSale4 = $_POST['price'];
$varbed4_RsSearchForSale4 = "b5";
if (isset($_POST['beds'])) {
$varbed4_RsSearchForSale4 = $_POST['beds'];
switch (true) {
case ($varloc4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varprice4_RsSearchForSale4 =='zzz' && $varbed4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varbed4_RsSearchForSale4 =='zzz' && $vartype4_RsSearchForSale4 == 'zzz'):
case ($varbed4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale4 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s OR price=%s OR type=%s OR beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc4_RsSearchForSale4, "text"),GetSQLValueString($varprice4_RsSearchForSale4, "text"),GetSQLValueString($vartype4_RsSearchForSale4, "text"),GetSQLValueString($varbed4_RsSearchForSale4, "text"));
$query_limit_RsSearchForSale4 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale4, $startRow_RsSearchForSale4, $maxRows_RsSearchForSale4);
$RsSearchForSale4 = mysql_query($query_limit_RsSearchForSale4, $propertypages) or die(mysql_error());
$row_RsSearchForSale4 = mysql_fetch_assoc($RsSearchForSale4);
if (isset($_GET['totalRows_RsSearchForSale4'])) {
$totalRows_RsSearchForSale4 = $_GET['totalRows_RsSearchForSale4'];
} else {
$all_RsSearchForSale4 = mysql_query($query_RsSearchForSale4);
$totalRows_RsSearchForSale4 = mysql_num_rows($all_RsSearchForSale4);
$totalPages_RsSearchForSale4 = ceil($totalRows_RsSearchForSale4/$maxRows_RsSearchForSale4)-1;
$queryString_RsSearchForSale4 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RsSearchForSale4") == false &&
        stristr($param, "totalRows_RsSearchForSale4") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RsSearchForSale4 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale4 = sprintf("&totalRows_RsSearchForSale4=%d%s", $totalRows_RsSearchForSale4, $queryString_RsSearchForSale4);
}?>

Hi David,
Thank you for your reply and patience, we are getting closer in spite of me!
Of course i needed to change the name of the recordset, i did that the first time i did it (when i got the error), the when i re did it i forgot, in my defense i was also trying to get a full understanding of the code using the W3Schools php reference and writing by the side of the code on a piece of paper what it meant in English.
Anyway after re doing the code correctly it still displayed all the records of my database but i realised that was because i was POSTING from the search form and when i changed it to the GET method I now get results when all 4 list menus are selected from and the paging works. After reading about the POST / GET method i chose the POST option, is the GET method a better option in my circumstance?
On my site now if the user selects from 1,2 or 3 of the menus rather than selecting the relevant records it displays the NO RESULT page, I would like my users to be able to select from all of the menus or ANY combination of the menus and find exact results for their search, for example if they only select a location and a price i want it display all records that match that location and price with any number of bedrooms and any Type of property: Perhaps this is due to how my list menus are set up, for each menu the first Item label is Location (or Beds or Type or Price) and the value i have left blank which i believe means that it will use the item label as the value, the second Item label for all menus is Any and again the value has been left blank. All other item labels have values relevant to database records.
I do look forward to your reply and cannot thank you enough for following this through with me, please continue to bare with me just a little more,
best regards
Tessimon
Date: Wed, 11 Nov 2009 06:56:24 -0700
From: [email protected]
To: [email protected]
Subject: Help with message please: Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line
You're not adding the WHERE clause to the SQL query. My example code uses $query_search. You need to change that variable to match the name of your recordset, i.e. $query_RSsearchforsale.
Moreover, the WHERE clause needs to go before ORDER BY.
$query_RSsearchforsale = "SELECT trueprice,`desc`, `propid`, `bathrooms`, `location`, `type`, `price`, `beds`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid ";
// Set a flag to indicate whether the query has a WHERE clause
$where = false;
// Loop through the associatiave array of expected search values
foreach ($expected as $var => $type) {
if (isset($_GET[$var])) {
    $value = trim(urldecode($_GET[$var]));
    if (!empty($value)) {
      // Check if the value begins with > or <
      // If so, use it as the operator, and extract the value
      if ($value[0] == '>' || $value[0] == '<') {
        $operator = $value[0];
        $value = ltrim(substr($value, 1));
      } elseif (strtolower($type) != 'like') {
        $operator = '=';
      // Check if the WHERE clause has been added yet
      if ($where) {
        $query_RSsearchforsale .= ' AND ';
      } else {
        $query_RSsearchforsale .= ' WHERE ';
        $where = true;
      // Build the SQL query using the right operator and data type
      $type = strtolower($type);
      switch($type) {
        case 'like':
          $query_RSsearchforsale .= "`$var` LIKE " . GetSQLValueString('%' .
$value . '%', "text");
          break;
        case 'int':
        case 'double':
        case 'date':
          $query_RSsearchforsale .= "`$var` $operator " .
GetSQLValueString($value, "$type");
          break;
        default:
        $query_RSsearchforsale .= "`$var` = " . GetSQLValueString($value,
"$type");
$query_RSsearchforsale .= ' ORDER BY detailstable.trueprice ASC';
>

Need help with a JavaScript to generate random number

Hi
First things first. I don't know the J of JavaScript.
When I was thinking of some readymade solution to generate a random number in Captivate, I found this on a LinkedIn forum.
1) Add a user variable to your project called "randomNumber". It's value can be zero.
2) Add a Text Caption with "$$randomNumber$$" in it, to check whether your script is working.
3) Add a button to the slide. Give it an On Success Action of Execute JavaScript. Turn off it's "Continue Playing the Project" checkbox.
4) Add the following text in the button's Script_Window:
var objCP = document.Captivate;
var rand = 1 + Math.floor(Math.random() * 10);
function onButtonClick(){
objCP.cpEISetValue('randomNumber', rand);
onButtonClick();
However, this is (as the poster in the forum warned) not working for Captivate 7. Can somebody please help?
I am open for any other methods of getting the same result.
Thanks in advance,
Sreekanth

Hi Sreekanth,
When testing, make sure you are testing from a web server where the web address begins with http or https. When setting the captivate variable "randomNumber" try this instead:
objCP.cpEISetValue('m_VarHandle.randomNumber', rand);
That will only work for SWF output. If you want it to work for both HTML5 and SWF output, try this code:
window.onButtonClick = function(){
          var rand = generateRandomNumber(1, 10);
          setCpVariable('randomNumber', rand);
window.generateRandomNumber = function(min, max){
          var randomNum = 0;
          if(!isNaN(parseFloat(min)) && !isNaN(parseFloat(max))){
                    min = Number(min);
                    max = Number(max);
              randomNum = Math.floor(Math.random() * (max - min + 1)) + min;
          return randomNum;
window.setCpVariable = function (cpUserVariableName, variableValue) {
          /* Check for HTML5 vs. SWF output */
          if (typeof window.cp === 'undefined') {
                    /* We have SWF output, so Get the Captivate Object */
                    var objCp = document.getElementById('Captivate');
                    if (objCp && objCp.cpEISetValue) {
                              /* Set the Captivate User variable with the JavaScript variable, variableValue */
                              objCp.cpEISetValue('m_VarHandle.' + cpUserVariableName, variableValue);
          } else {
                    /* We have HTML5 output */
                    /*If variable does not exist off of the window object, then use the variables manager*/
                    if (typeof window[cpUserVariableName] === 'undefined') {
                              if (cp.vm && cp.vm.setVariableValue) {
                                        cp.vm.setVariableValue(cpUserVariableName, variableValue);
                    } else {
                              window[cpUserVariableName] = variableValue;
window.onButtonClick();
Be sure to test this from a web server or else local security will prevent the javascript from executing.
Best,
Jim Leichliter

Need help with adjusting Javascript code to work in Adobe Edge (Countdown)

Hello
Im a newbie when it comes to working with Javascript and Adobe Edge and need a bit of help with adjusting some javascript code to work with Adobe Edge. A friend of mine helped me with making this javascript code: Edit fiddle - JSFiddle
Its a simple countdown which counts down to a certain time at a certain date. What I aim to do is to add this code as a trigger on a text-element called "countdown" (within a symbol called "count").
I have tried to do this as the code is, but it does not work. Anyone have any suggestions?
Thanks!
Mvh,
Øyvind Hermans

Hello again
I have stumbled upon a problem with these animations; They crash the browser after viewing them a little while, usually less than 30 seconds in.
Is this problem also occuring when you watch the animations?
Is the countdown-code to much for the browsers to handle?
Thanks in advance for your answers.
Sincerely,
Øyvind Hermans

Help with PDF Javascript calculation involving checkboxes

Hello Everyone,
I have a PDF Form, and need help with a calculation.
For the sake of simplicity, Lets say I have 5 fields. FSA1 and FSA2 are checkboxes. TotalClaimed1 and TotalClaimed2 are text fields which allow only a numerical input.
The last box, FSA_Total, should add the value from TotalClaimed1 if FSA1 is checked, and it should also add the value from TotalClaimed2 if FSA2 is checked.
The code is malfunctioning, however. Something is causing it to add to the total every time the box is checked. Its almost like the checking off of the box is what causes the addition.
It seems like the code is being read as "When the box is checked, add the value to the total", so each time the box gets checked, it adds to the total again.
and it should be "IF the box is checked, add the value to the total" so if there is a value in the field, and the box is checked, that value is passed on to the total; and if the box is not checked, the value is ignored.
Can anyone spot what might be causing this? Code is below.
var claim1 = parseInt(this.getField('TotalClaimed1').value),
    claim2 = parseInt(this.getField('TotalClaimed2').value),
    fsabox = parseInt(this.getField('FSA_Total').value);
if (this.getField('FSA1').value == 'Yes') {
    fsabox += claim1;
if (this.getField('FSA2').value == 'Yes') {
    fsabox += claim2;
event.value = fsabox;
Thanks
Thisguy1234

This is a custom calculation script for FSA_Total, correct? The code is working correctly, it's just not what you want. Assuming this is a custom calculation script in the FSA_Total field, it should be something like:
var sum = 0;
var claim1 = parseInt(getField('TotalClaimed1').value, 10),
    claim2 = parseInt(getField('TotalClaimed2').value, 10),
// Add field values if corresponding check boxes are selected
if (getField('FSA1').value !== "Off") {
    sum += claim1;
if (getField('FSA2').value !== "Off") {
    sum += claim2;
// Set this field value
event.value = sum;
Why are you using parseInt, exactly?

Help with embedding Javascript for Lightbox Photo Gallery in Muse!

Hi all:
I am fairly new to Muse and I have been having trouble finding relevant information for embedding Javascript in order to get a lightbox to work in Muse. Would anyone be able to walk me through embedding the Javascript for the Lightbox Photogallery for Picasa in Muse?
This is the code I want to use: Lightbox Photo Gallery and Slideshow for Picasa
And this is the look I am trying to accomplish within my Muse site: Cycling Around The World / January 2006 / Picasa Template by www.paulvanroekel.nl
Any help would be appreciate. Thanks much,
Alexis

Hi,
I have tried inserting the script that you have pasted above as HTML on my test site and it worked.
What happens is whenever you insert something as HTML, Muse by default creates a div tag and places the content within the div tag. What I have done differently is I have inserted the JS with in the <script> tag and it has inserted the Javascript in this manner,
I beleive that since this a browser re-direct script that you are using, you would like to place this in the head section and not in the body tag, however, that is certainly not possible using Muse as it does not allow access to the code it generates as a muse file.
You, can still export the pages as HTML and make the appropriate changes there before uploading to the server.
Hope that helps.
Regards,

Help with T61 monitor warning

Whenever I use Adobe Photoshop Elements 5, or just recently installed Elements 7, I keep getting a warning at the start of the editing option that says "The monitor profile "Lenovo ThinkPad LCD Monitor" appears to be defective. Please rerun your monitor calibration software. It also has buttons to click "Ignore Profile" and "Use Anyway." I don't know what this means. I usually click the Ignore Profile button. Can someone tell me what I need to do to resolve this warning. And is there a Lenovo monitor calibration software? What do I need to do to calibrate the monitor. Thanks for any help you can give.

I think this is just to warn you regarding your colour profile of your monitor doesn't match with that of the software, which may result in colour inconsistencies.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Need help with this Generics Warning

Hi All,
I could not understand what the following Generics Warning means
Type safety: The cast from Object to HashMap<String,Object> is actually checking against the erased type HashMap
Could anyone please help me with this.
Here is the erring line of Code :
HashMap<FDTColumInfoKey, ColumnInfo> designMap = (HashMap<FDTColumInfoKey, ColumnInfo>)wdContext.currentContextElement().getColumnInfoMap();
Thanks !

SloMoe wrote:
Hi Malcolm,
tnx for taking time to answer my query, but doesn't Generics give an exception during compile time as opposed to Run Time ? I mean if the attributes type in the Generic definition does not match with the type of the attributes during Compile time, An exception will be thrown. So why the warning ?Because, in this case, there's no way that the compiler can check the correctness of the generics. You're telling the compiler that the object you retrieve is of the relevant generic types but the compiler can't verify it.
That's also true with an ordinary cast from Object, of course, but if with an ordinary cast at least the run time will verify that the object is actually of the required type where the cast is made and throw a CastClassException immediately. So it's easy to debug.
With generics the run time doesn't have access to the generics data. This is what is meant by "erasure". So it can check that the object is a HashMap when casting, but not that it contains the right type of entries. This means that, at some later point in the code, it might retrieve an object from the map and discover that it's of the wrong type, thus causing a ClassCastException in a statement with no explicit cast.

Help with "Unresolved Component" warning

I know this was asked recently, but I think the poster had different set of circumstances, because the advice offered in that thread didn't lead me to a solution. Or else I'm incompetent! Hopefully someone can help me with the issue I'm having.
Here's the scenario:
I get a "Unresolved Component" warning for syntax like this: "createObject('component', 'ss_components.application_methods')"
- 'ss_components' is a mapping on the CF Server, and the application works fine when tested
- My CFBuilder Project folder is located in a different place than the wwwroot. Wwwroot is where all the CF scripts/application files are. Within the CFBuilder project, i have a Linked Folder to the wwwroot folder.
I have the following settings in CFBuilder. Some of these settings are the way they are because I was trying various things out to try and fix this 'Unresolved' problem.:
-Preferences>ColdFusion>Server Settings> (all checked)
-Preferences>ColdFusion>Startup> Index all CFCs... (unchecked)
-Properties>ColdFusion Project>(I have my linked folder here, when I created it, I unchecked the 'Use Link Folder to Resolve CFCs)
-Local Server Settings: blank entry for "Document Root"
I'm aware of the inheretence for finding components and I don't fully understand it since I'm new to CFBuilder, but all I know is that the first place CFBuilder looks for components is Mappings defined by CFServer.... I only want it to look there, since that's the only way I ever refer to components
- Running CF Builder 2, trial on my dev machine which has:
     CF9 installed
     IIS7.5
     RDS Enabled (and works because i can browse the db in CFBuilder)
     CFBuilder was installed as an Eclipse plugin, not standalone.
Please if anyone can help me with this, i would really appreciate it. I've been trying to fix this all day! :-S
Thanks
Dan

I'm having the same problem. If I look in the Services Browser, the component shows up correctly, but in CFB2, I get the Unresolved Component message. Here is my code:
component output="false" extends="appname.extensions.components.core.Framework" {...}
I have a CF mapping "appname\extensions" to the folder where the code is. I've tried just about everything with the server settings in CFB2 as well as the Project settings. When I click on the error in the gutter, "Quick Fix" suggests to me to create "appname.appname.extensions.core.Framework", but I'm not sure why. Any help would be great!
Thanks,
Tyler

Need help with CF8 Javascript error dealing with cfdiv

Ok, so I'm currently working with CF8 because that is what my employer has...I'm having a problem with this error in IE:
Error pocessing Javascript markup in element xxxxx.
I had the error on two pages, but I fixed the first page by adding bindonload = "false"
Here is the code for the second page:
function(){return A.apply(null,[this].concat($A(arguments)))}
<cflayout type = "tab" tabposition= "left">
      <cflayoutarea title = "General Information">
      <cfdiv bind = "url:getforms.cfm?people={people.value}" bindonload = "false" style = "padding: 0 10px;" />
      </cflayoutarea>
      <cflayoutarea title = "Degree Infomation">
      <cfdiv bind = "url:getdegforms.cfm?people={people.value}" bindonload = "false" style = "padding: 0 2px;" />
      </cflayoutarea>
      <cflayoutarea title = "Documentation Infomation">
      <cfdiv bind = "url:getdocforms.cfm?people={people.value}" bindonload = "false" style = "padding: 0 2px;" />
      </cflayoutarea>
      </cflayout>
</td>
<td width="233" align="center" valign="top" class = "contenttd">
<h3>Current Employees</h3>
<cfajaximport tags = "cfform" />
<cfajaximport tags = "cfgrid" />

<cfquery name="getPeople" datasource="#sacsds#" username="#sacsuser#" password="#sacsuser#">
SELECT b.LastName + ', ' + b.FirstName AS FullName, p.IDNum FROM faculty.dbo.SACS_Person p, faculty.dbo.budPerson
b WHERE p.DeptCode = '#session.deptcode#' AND p.IDNum = b.ID ORDER BY b.LastName,
b.FirstName
</cfquery>

<cfform>
<cfselect name="people"
        query="getPeople"
        display="FullName"
        value="IDNum"
        />
</cfform>
That is only a piece of the code, but basically I want a form where I can select an employee off a list and then their information + forms come up in the cflayoutarea tabs.
An editable form is being called to these cfdivs... :\ i'm sure what else to do here...

You might want to try a JavaScript forum. This one is for Java, which has nothing to do with JavaScript.

Need some help with button JavaScript for Save As event.

Hi,
I'm using Adobe Acrobat X Pro and am completely new to scripting forms in Adobe (completely new to Adobe Acrobat as well!). On a form there is a save button that opens the Save As dialog by using a trigger (Mouse Up) and action (Execute a menu item - File>Save As...>PDF...) and this works fine, however, I want to now use javascript to modify this button's behavior so that is uses a trigger (Mouse Up) and action (Run a JavaScript), and I want that JavaScript to combine the text values from two form fields (a location Dropdown and a date Text field) and use this concateneated string + ".pdf" as the filename when it opens the Save As dialog. Make sense?
This is what I have added to the button as a JavaScript so far I am using a test string at the moment ("NewFile.pdf") and will add the concatenated string to the script after I know the script is working as it should.
var newFileName = "NewFile.pdf";
var pathArray = this.path.split("/");
pathArray.pop();
pathArray.push(newFileName);
this.saveAs(pathArray.join("/"));
Two issues so far:
1. When I click the button nothing happens, no Save As dialog or anything.
2.When I check the button properties under the Actions tab the Select Action property shows "Execute a menu item" even though I previously selected "Execute a JavaScript"
Thanks for any help!

Thanks guys, I appreciate the response! If I can bypass the Save As dialog and save the file to a default location using a file name that is contructed from two form field values then that would be perfect. I definitely think it is feasible to have a script file installed locally on each users workstation. I don't quite understand about folder-level security, etc. yet but am eager to learn how to do this stuff if you can give me gentle push in the right direction! Thanks!

Help with "unchecked conversion" warning

Hello,
following line
Vector devices = SomeDeviceManager.getDeviceList();
gives a warning (when compiled in java 1.5 with -Xlint):
found raw type: java.util.Vector
missing type parameters for generic class java.util.Vector<E>
When I change code to
Vector<DeviceInfo> devices = SomeDeviceManager.getDeviceList();
warning turns into "unchecked conversion" warning. SomeDeviceManager is from some old .jar library, so it's not possible to change getDeviceList signature.
How can I eliminate this warning?
Thanks.

@SuppressWarnings("unchecked")
- Saish

Help with PS Javascript.

Hey,
So I have compiled a script (with a lot of help from the community here!) and it works half the time and the other half it doesn't and I can't seem to isolate the problem.
Basically, i have lots of different images with irregular filenames and they all have duplicates with a lower exposure. The script loops through open documents, looks for the duplicate image by compareing the shoot time in the EXIF data, works out which one is lighter by getting the mean value and pastes the lighter one ontop of the dark image, closes the light document and moves.
Like I said it works perfectly half the time and then other times it does nothing!
Here is the script;
var docRef = activeDocument;
var alldocs = app.documents;
for (var i = 0; i < app.documents.length; i++) {
try {
var thedoc = alldocs[i];
var thedata = thedoc.info.exif;
var thetime = thedata[12];
////// get mean
var histo = thedoc.histogram;
var mean = 0;
var total = 0;
for (var n = 0; n < histo.length; n++) {
total = total + histo[n];
for (var m = 0; m < histo.length; m++) {
var thisValue = histo[m];
mean = mean + (m * thisValue / total);
var alldocs = app.documents;
     for (var i = 0; i < alldocs.length; i++) {
       if (String(thedoc) == String(alldocs[i])){
           /////alert (alldocs[i]);
       else{
            var tempdata = alldocs[i].info.exif;
            var temptime = tempdata[12];
            ////// get mean
        var histo = alldocs[i].histogram;
        var tempmean = 0;
        var total = 0;
        for (var n = 0; n < histo.length; n++) {
        total = total + histo[n];
        for (var m = 0; m < histo.length; m++) {
        var thisValue = histo[m];
        tempmean = tempmean + (m * thisValue / total);
            if (String(temptime) == String(thetime)){
                try{
                    if (tempmean > mean ){
                        activeDocument = alldocs[i];
                        var tempdoc = activeDocument;
                        activeDocument.activeLayer.name = "light";
                        newlayermask () ;
                        var thelayer = activeDocument.activeLayer;
                        thelayer.duplicate(thedoc, ElementPlacement.PLACEATBEGINNING);
                        activeDocument = tempdoc;
                        tempdoc.close(SaveOptions.DONOTSAVECHANGES);
                        break;
                else if (tempmean < mean ){
                        activeDocument = thedoc;
                        activeDocument.activeLayer.name = "light";
                        newlayermask () ;
                        var thelayer = activeDocument.activeLayer;
                        var tempdoc = alldocs[i];
                        thelayer.duplicate(tempdoc, ElementPlacement.PLACEATBEGINNING);
                        activeDocument = thedoc;
                        thedoc.close(SaveOptions.DONOTSAVECHANGES);
                        break;
                catch (e){}
   catch(e){alert(e);
       break;}
   ///////////////// FUNCTIONS
function newlayermask () {
var idMk = charIDToTypeID( "Mk " );
    var desc124 = new ActionDescriptor();
    var idNw = charIDToTypeID( "Nw " );
    var idChnl = charIDToTypeID( "Chnl" );
    desc124.putClass( idNw, idChnl );
    var idAt = charIDToTypeID( "At " );
        var ref88 = new ActionReference();
        var idChnl = charIDToTypeID( "Chnl" );
        var idChnl = charIDToTypeID( "Chnl" );
        var idMsk = charIDToTypeID( "Msk " );
        ref88.putEnumerated( idChnl, idChnl, idMsk );
    desc124.putReference( idAt, ref88 );
    var idUsng = charIDToTypeID( "Usng" );
    var idUsrM = charIDToTypeID( "UsrM" );
    var idRvlA = charIDToTypeID( "RvlA" );
    desc124.putEnumerated( idUsng, idUsrM, idRvlA );
executeAction( idMk, desc124, DialogModes.NO );
If anyone can show me where I could be going wrong or point in the right direction that would be much appreciated!
Thanks,
Mark

Have you read the Acrobat JS API reference abouth this method?
>app.mailMsg(true,"a&b.com");
The call above will open your mail client and insert "a&b.com" in the to box. If you want to use this code, you should include the full recepient's email address like "[email protected]".
app.mailMsg(true, "[email protected]", "", "", "Your Subject Goes Here", "Your message goes here.");
or
app.mailMsg({bUI: true,
cTo: "[email protected]",
cSubject: "Your subject goes here",
cMsg: "Your message goes here."
The example from the Acrobat JS API reference for this method, has the following example:
var cMyMsg = "Below are the current budget figures:\n\n";
cMyMsg += "Date Compiled: " + this.getField("date").value + "\n";
cMyMsg += "Current Estimate: " + this.getField("budget").value + "\n";
app.mailMsg({
bUI: true,
cTo: "[email protected]",
cSubject: "The latest budget figures",
cMsg: cMyMsg

Help with Coding and Warning/Error Messages

Can someone help me with Java Language to get SAP to enter through soft warnings and errors?
I am working to record/write a script to change orders but am hitting a road block when error messages pop up. I need to get it to enter through if the message pops up or move to the next step if not... there can be 1 error or multiples depending on the number line items.
THANKS!

I'm guessing that your computer is too slow to record
real-time audio.
Of itself it should be fine - I still use a G3 desktop to record stereo with no problems at all - though GB may add an overhead. Still, this shouldn't be happening.
If you have other tracks playing
while you are recording this could be an issue,
especially if there are a lot playing.
Yes...
If this is the
case then you can lock the tracks playing by pressing
the lock icon.
This won't make any difference to audio tracks, only to MIDI tracks, and in that case it reduces demands on the processor but increases demands on the disk - which appears to be the trouble in the first place.
I agree that you should consider
getting an external hard drive. You can set the
record path to the external hard drive
Since laptop disks are usually slower than external ones this might help - particularly if your internal drive is very full.
which will
free up working memory to your computer.
No it won't, but it will take the strain off the internal disk, if that's what you mean. The memory might be an issue, which would be resolved by installing more RAM if possible.

Help with a JavaScript email submit button taking word null out if blank

     First of all I dont know much about java, but I wanted to create a submit button and I did alot of research. I want a button that will email some pdf files I have created in LiveCycle. So far everyting works but my code needs help.
     There are a few fields I want to be place in the body of the e-mail, but if left blank I dont want null to apear on the email subject or body.
Here is what I have so far *this is a work around, but it not very good.
strSubject= "Account "+DropDownList1.rawValue+" For: " +last.rawValue +", " +first.rawValue +" " +mi.rawValue;
if (mi.rawValue ==null || mi.rawValue =="")strSubject = "Account "+DropDownList1.rawValue+" For: " +last.rawValue +", " +first.rawValue;
     The 4 fields am working on are First name, last name, Mi and comments. First and last are alwasy used, but if MI is not I dont want Null in there, with what I have above it works but its messy. I wanted to do the same with Comments if its left blank I like for it to read "Comments: None" not null
On the If statement I just re did the whole deal with out the mi.rawvalue but i now that is not right way... any help would be great.
Thanks

May be you can try like below..
var strDropDownListValue,strFirstName, strLastName, strMI
if(DropDownList1.rawValue == null || DropDownList1.rawValue == "")
       strDropDownListValue = "";
else
     strDropDownListValue = DropDownList1.rawValue;
if(first.rawValue == null || first.rawValue == "")
strFirstName = "";
else
     strFirstName = first.rawValue;
if(mi.rawValue == null || mi.rawValue == "")
     strMI = "";
else
     strMI = mi.rawValue;
if(last.rawValue == null || last.rawValue == "")
     strLastName = "";
else
     strLastName = last.rawValue;
strSubject = "Account "+ strDropDownListValue +" For: " + strLastName +", " + strFirstName +" " + strMI;
Thanks
Srini

Help with a JavaScript Warning

Similar Messages

Maybe you are looking for