How does the S_NQ_AACT table gets written when working with Usage Tracking?

Hi,
We want to monitor the performance of each subject area so we have implemented the Usage Tracking.
We have followed the steps mentioned on the link http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/usage_tracking/usage_tracking.htm
But now the table S_NQ_ACCT is not getting written, whenever any user logs into OBIEE and runs a request his entry is not logged into that table.
Anybody has encountered such a type of issue help would be appreciated.
Regards,
Apoorv

The part of NQSConfig,ini goes like this:
[ USAGE_TRACKING ]
ENABLE = YES; //DEFAULT: NO
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT" ; // "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
The User has the previleges to write to the table, I am not sure where I have gone wrong?
Regards,
Apoorv

Similar Messages

How does the MDKP table gets updates

Dear PP Guru's,
I am new to SAP PP,
We have a query that how does the MDKP table gets updates,
Some time If we create new material by coping the material which is showing in table MDKP,
But new material is not showing in table MDKP,
Based on table MDKP we are fetching some data, due to above problem we are not able to fetch the data for some materials,
Please suggest what could be the reason,
Any help will be highly appreciated,
Thanks in advance,
Sachin.

Thanks Thaila,
I have checked the same by doing MRP through MD02 & the entry is getting update in MDKP,
But for some of our materials MRP (MD02) is done earlier, but these materials are not showing in MDKP,
Please suggest, when the entries in MDKP are removed, are there any conditions for removing the entries from MDKP.
please pour some light on the issue,
Thanks once again,
Sachin.

HT201209 ive sent a gift how does the other person get it

ive sent a gift how does the other person get it

Resending iTunes Gifts and Gift Certificates
http://support.apple.com/kb/HT1541

How does the ituns app on my ipad2 work?

How does the itunes app on my 1pad2 work?

The iTunes app on your iPad is just a portal to the iTunes Store. To play music or videos, use the Music App and the Videos App.
Here's a link to iPad iOS5 User Guide

How does the fade in or fade out works on a apple loop

how does the fade in or fade out works on a apple loop

What does the manual say about it?
http://help.apple.com/logicpro/mac/10/#lgcpf7c0ee6c

Does the QT MPEG2 Playback Component install & work with QT X ?

I am installing a new iMac with Snow Leopard.
Does the QT MPEG2 Playback Component install & work with QT X ?
(btw, I have already done the optional install of QT7 from the SN DVD).

Does the QT MPEG2 Playback Component install & work with QT X ?
I cannot get "muxed" MPEG2 content (e.g., VOB) file to load in QT X but both QT 7 Pro (with usual audio limitations) and MPEG Streamclip still function normally under Snow Leopard. (Since I don't normally use QT X, I had to actually run a quick test to see what would happen and haven't really performed any real tests. So take my comments with a grain of salt at this time.)
with such files on my PB Pro.

Does the new command 2 binary format work with Apple Push Notification Service? I receive an invalid response status code of 128.

Does the new command 2 binary format work with Apple Push Notification Service? I am sending 2 messages with the same payload to 2 different devices. None of the messages display on either of the devices. It seems that at least 3 should have been displayed. For my first device, I received a response with an invalid status code of 128 and the message identifier is 2 indicating that the first message was OK. However no message was displayed on the phone. For the second device, I did not receive any error response, but no message was displayed on the device.
Does ANS perform any validation on the message identifier? The Local and Push Notification Programmin Guide says the message identifier is:
An arbitrary, opaque value that identifies this notification. This identifier is used for reporting errors to your server.
I know that the device tokens are valid because the same tokens work when I use the legacy basic or enhanced formats. The phones display the messages correctly when I send to ANS using the old ANS message format.
Here is the data and the response:
Sent to ANS: 2 0 0 0 158 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 119 141 5 0 1 5 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 119 141 5 0 1 5
ANS returned an error: 8 128 0 0 0 2
Sent to ANS: 2 0 0 0 158 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 5 4 0 4 83 7 119 147 5 0 1 5 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 6 4 0 4 83 7 119 147 5 0 1 5
ANS did not return a response.

Hello, can you please help me ?
You specified sample payload here:
TerrellFromLockhart wrote:
I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
About to read response at Thu Feb 20 15:40:20 CST 2014
SocketTimeoutException
2 - is clearly command
0 0 0 77 - frame length
1 - item Id
what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
Item id should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
About Mini DisplayPort to HDMI adapters

Does the Wacom Intuos Creative Stylus 2 work with Adobe Draw

Does the Wacom Intuos Creative Stylus 2 work with Adobe Draw?

IP,
I believe you should ask over here:
Adobe Illustrator Draw

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

How does the Class javax.security.auth.Subject work?

Hi,
i don't understand how does the class Subject work.
First i will describe how do i understand u can use the class Subject
This is the way you can create a Subject(i think):
1. create a LoginContext, where u can tell over its parameter which
Module to use
2. a LoginModule will be used
3. now the LoginModule create a Subject
if this steps right--> ok, else--> please write how it really works
Now the questions:
1. Where do the LoginModule get the username and stuff like this from
to fill the Subjects? Principals?
2. Where will be the Subject save, at server or at client side?
when save on server: how to reference a Subject is belong to the
right Client?
when save on client: how to ensure the client do not modify it?
3. In the documentation of JavaTM 2 Platform Std. Ed. v1.4.1, there is
no advice, that the class have any FIELDS, but then where the
principals are saved?
4. The Class Subject do not have any methodes to modify the principals,
so how to modify it if necessary?
i think this is enough for the beginnig :)
thanx,
edo

Hi
Let me try to answer. I am a bit confused too.
Hi,
i don't understand how does the class Subject work.
First i will describe how do i understand u can use
the class Subject
This is the way you can create a Subject(i think):
1. create a LoginContext, where u can tell over its
parameter which
Module to use
2. a LoginModule will be used
3. now the LoginModule create a Subject
Correct.if this steps right--> ok, else--> please write how it
really works
Now the questions:
1. Where do the LoginModule get the username and stuff
like this from
to fill the Subjects? Principals?
The Loginmodule does not need the user name. The username is
only relevant to your application not to JAAS. Consider a standaalone
application. Whoever starts the application, becomes the user.
After you start the application, and login (whatever way), your subject
is created. This subject pertains to the person who is executing the application, not the application specific userid/username. So the user id or name is not required. There is only one user, who is running the application. The JAAS architecture is more relevant for UNIX like
permission/grant structure, which determines who can execute what.
>
2. Where will be the Subject save, at server or at
client side?
Again the Subject has nothing to do with your application specific userid. It will be there in the LoginContext. So in a sense a LoginContext is actually a user, not a Subject.
when save on server: how to reference a Subject is
is belong to the
right Client?
when save on client: how to ensure the client do
do not modify it?
In a client server mode, usually the login is done twice. You have to find a way to communicate the subject to the server.3. In the documentation of JavaTM 2 Platform Std. Ed.
v1.4.1, there is
no advice, that the class have any FIELDS, but then
en where the
principals are saved?
4. The Class Subject do not have any methodes to
modify the principals,
so how to modify it if necessary?
I think you can add Principals. That is definitely there.i think this is enough for the beginnig :)
thanx,
edo
Hope this helps. As of now I do not think JAAS provides a very good architecture for authorization.
cheers
Projyal

How does the Daubechies-4 wavelet VI actually work?

Hi,
I'm a student currently working on my final year project, of which one of the objectives are to detect peaks of ECG signals (R-peaks) using the Daubechies-4 wavelet transform VI in LabVIEW. I'm current using LabVIEW 2013 student edition (6 months trail), if that makes any difference.
I am quite confused about how the Daubechies-4 wavelet works:
1) How many levels does it decompose the signal into?
2) Is there a way to set the level of decomposition?
3) Are filters already applied in the VI or do I actually need to design a filter myself?
4) What is the main difference between a Db4 PtByPt and a normal Db4 transform in terms of LabVIEW?
5) Finally, how does the VI actually superimpose the wavelet onto the signal? Does it take the entire signal into consideration or does it take each pulse into consideration when superimposing the wavelet?
Thanks in advance for the answers.
Regards,
Derren
Solved!
Go to Solution.

Hi Derren,
Firstly, can you clarify the exact name of your 'Daubechies-4 wavelet transform VI' and in which pallette you find it in LabVIEW (i.e. which module / toolkit it is from)? It is also possible that the VI you mentioned is not from NI. For example, maybe you inherited that from your senior who was in the project last year.
Nevertheless, the closest match I can find is WA Discrete Wavelet Transform VI found under the Advanced Signal Processing toolkit. You can choose db04 in the wavelet terminal. This is a bit different to what you described as the VI can work for different kinds of wavelet, not just Daubechies type. Suppose you will use this, then the answer to your questions are:
1) How many levels does it decompose the signal into?
2) Is there a way to set the level of decomposition?
You can set this by wiring the value to the level terminal of the VI.
3) Are filters already applied in the VI or do I actually need to design a filter myself?
Both options are possible. Some commonly used filters are included and you can choose this by wiring the wavelet terminal. You can design your own filter using Wavelet Design Express VI and wire the output to the analysis filters terminal of WA Discrete Wavelet Transform VI.
4) What is the main difference between a Db4 PtByPt and a normal Db4 transform in terms of LabVIEW?
I can not find these VI you mentioned. Please clarify.
5) Finally, how does the VI actually superimpose the wavelet onto the signal? Does it take the entire signal into consideration or does it take each pulse into consideration when superimposing the wavelet?
I am not sure if I understand this question correctly. You can open the WA Discrete Wavelet Transform VI to see how it works inside up to the decimation filtering, in which it is protected as a DLL. From what I see it takes the entire signal (modified with the chosen extension) for this main process.
As a last note, your LabVIEW Student Edition does not include Advanced Signal Processing toolkit, hence you will not find above VIs I mentioned. Try checking with your school if they have purchased Academic license of LabVIEW, which usually includes the toolkit.
Hope this clarifies.
Regards,
A. Yodha
NI Singapore

Does the Digi@nywhere A/D Plus work with PCI Express ?

Hi guys!
I am planning to purchase a Digi@nywhere A/D Plus for my PC,
but all PCI slots on my K9N Diamond mainboard are already busy,
only the second PCI Express slot which can be used for a second
graphic card in SLI mode (my mainboard uses nForce 590 SLI chipset)
is free to use.
Can the Digi@nywhere A/D Plus work with my PCI Express slot,
which is primarily intended to be used for a second graphic card in SLI mode,
or not ?

you cannot put a pci device in a pcie slot

How does the ping command get the IP address?

I am running Windows 7 and when I do a ping command using a host name, the ping command works fine and returns the correct IPV4 address and is able to send and receive data using that address.
On the other hand, if I write my own program and use either GetAddrInfo or GetAddrInfoEx. neither of them give me the result I expect. GetAddrInfo fails with a host not found error and GetAddrInfoEx gives me back a return code of zero, but the ai_addr field
of the returned structure is garbage.
Do any of you out there know how ping does it? Because if ping can do it, I should be able to also.
Sid Schipper GA/RSG/Network Engineering Software Developer

Never mind! The question came about because of my stupidity. GetAddrInfoEx was returning the correct IP address, but it was being returned as a double-byte character string and I was interpreting it as a single-byte character string, Oops!, my bad!, sorry
to bother all of you and Thank you for your responses.
Sid Schipper GA/RSG/Network Engineering Software Developer

Does the route list gets reset when adding route pattern in version 9 of CUCM?

Hi All,
I created a new route pattern in call manager version 9 and then associated it to an existing route list. But when I was trying to save the route pattern. I was prompted with the message saying " Any updates to this Route Pattern automatically resets the associated gateway or Route List"
I was not able to see this message on CUCM version 8.6 however on CUCM version 9 it is there.
Does that mean that the route list/gateway will be reset and the existing calls will be dropped?
Or is it a bug?
A response will be greatly appreciated.
Thanks

Hi Farhad,
It does pop up when we modify the Route Pattern in CUCM 8.6 too.
If you asociate the GW/Trunk directly to Route Pattern, yes, it will reset them and calls will be interrupted. To avoid that, we need to associate the Route List to Route Patterns.
//Suresh
Please rate all the useful posts.

How does the S_NQ_AACT table gets written when working with Usage Tracking?

Similar Messages

Maybe you are looking for