Help with a key that popped off!

Hi! I was wondering if someone could help me. My dog jumped up on my lap and ripped my apple key off. How do you get these back in?? It is the apple key to the left of the space bar. Thanks!

Look at the underneath side of the key. Are all the little prongs intact and not bent out of position? If they are bent or broken, you will need to buy a new key.
You need to put the little ring back in first. (If you already have it in, you need to grab hold of the outside top and bottom and pull them up like pulling up an ironing board. Go on to the next paragraph about attaching the key.) If you don't already have the ring in, you pull it open like you would an ironing board. The front of the circle part should be down, and the outside frame on the front should come up. Take the two tabs that are now down in the back and hook them under the two metal pieces at the back of the hole on the keyboard. Take the flat front part of the circle part that is down and hook it under the metal tab on the keyboard at the front of the hole.
Next, snap the the key onto the ring part, attaching the front of the key first. Then rock it back and snap on the back part of the key. Pushing in the center of the key, push downward firmly to reseat the key.
Refer to the photos in this Knowledge Base article as you go, but, hopefully, this will help you understand the photos a little better.
Good luck!

Similar Messages

  • Can someone help with a div that pops up when you hover over a button?

    I made a div that pops up (stacked on the rest of the page) when you hover over a button (gigs). It works in the safari preview but when I test it online it doesn't. It's above the logo instead of blocking it and on the left site instead of the right. And when you open the page it isn't hidden like in the preview. Does someone know what is wrong?
    The test page: Stuff

    Below code, onclick of 'GIGS' shows pop-up window. You then have a 'close' button which when clicked closes it.
    <!DOCTYPE html>
    <!--[if lt IE 7]> <html class="lt-ie9 lt-ie8 lt-ie7"> <![endif]-->
    <!--[if IE 7]> <html class="lt-ie9 lt-ie8"> <![endif]-->
    <!--[if IE 8]> <html class="lt-ie9"> <![endif]-->
    <!--[if gt IE 8]><!--> <html> <!--<![endif]-->
    <head>
        <meta charset="utf-8">
        <title>Stuff</title>
        <meta name="description" content="">
        <meta name="viewport" content="width=device-width">
        <link rel="stylesheet" href="http://www.rockoco.be/stuff/css/main.css">
        <link rel="shortcut icon" href="favicon.ico">
        <link rel="apple-touch-icon" href="favicon.png">
        <!--[if lt IE 9]> <script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script> <![endif]-->
    <script type="text/javascript">
    function MM_showHideLayers() { //v9.0
      var i,p,v,obj,args=MM_showHideLayers.arguments;
      for (i=0; i<(args.length-2); i+=3)
      with (document) if (getElementById && ((obj=getElementById(args[i]))!=null)) { v=args[i+2];
        if (obj.style) { obj=obj.style; v=(v=='show')?'visible':(v=='hide')?'hidden':v; }
        obj.visibility=v; }
        </script>
    </head>
    <style>
    #popup {
        position: absolute;
        right: 0;
        z-index: 100;
    #popup img {
    display: block;
    #popup p {
    margin: 0;
    padding: 0;
    #popup a {
        text-decoration: none;
        display: inline-block;
        padding: 8px 12px;
        color: #fff;
        background-color: #000;
    </style>
    <body>
    <div id="popup">
    <img src="http://www.rockoco.be/stuff/img/Flyer-030315.png" alt="popup" width="426" height="605" class="png" />
    <p><a href="#" class="closeWindow">CLOSE</a></p>
    </div>
    <div id="content">
    <h1><img class="svg" src="http://www.rockoco.be/stuff/img/logo.svg" alt="Stuff" /></h1>
    <nav id="social">
        <ul>
       <li><a href="#"><img class="svg" src="http://www.rockoco.be/stuff/img/gigs.svg" alt="Gigs" /></a></li>
            <li><a href="https://twitter.com/36STUFF" target="_blank"><img class="svg" src="http://www.rockoco.be/stuff/img/twitter.svg" alt="Twitter" /></a></li>
            <li><a href="https://www.facebook.com/STUFF.isthebandname" target="_blank"><img class="svg" src="http://www.rockoco.be/stuff/img/facebook.svg" alt="Facebook" /></a></li>
            <li><a href="https://soundcloud.com/stuffmusic" target="_blank"><img class="svg" src="http://www.rockoco.be/stuff/img/soundcloud.svg" alt="Soundcloud" /></a></li>
            <li><a href="http://stuffmusic.bandcamp.com/" target="_blank"><img class="svg" src="http://www.rockoco.be/stuff/img/bandcamp.svg" alt="Bandcamp" /></a></li>
            <li><a href="https://www.youtube.com/user/duststuff/videos " target="_blank"><img class="svg" src="http://www.rockoco.be/stuff/img/youtube.svg" alt="Youtube" /></a></li>
            <li><a href="mailto:[email protected]"><img class="svg" src="http://www.rockoco.be/stuff/img/contact.svg" alt="Contact" /></a></li>
        </ul>
        <ul>
             <li><a href="[email protected]" target="_blank"><img class="svg" src="http://www.rockoco.be/stuff/img/remixes_@_ab_klein.svg" alt="Remixes" /></a></li>   
        </ul>
    </nav>
    </div>
    <footer>
        <a class="left" href="http://www.minguely.ch" target="_blank"><img src="http://www.rockoco.be/stuff/img/logo_minguely.png" alt="" /></a>
            <a class="right" href="http://www.martincramatte.com/" target="_blank"><img src="http://www.rockoco.be/stuff/img/logo_martincramatte.png" alt="" /></a>
    </footer>
    <script src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
    <script>
    $(document).ready(function() {
    $('#popup').hide();
    $('.svg').click(function() {
    $('#popup').show()
    $(document).ready(function() {
    $('.closeWindow').click(function() {
    $('#popup').hide()
    </script>
    </body>
    </html>

  • Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?

    Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?

    File icon with ? mark on it means it can't read from the hard drive. The hard drive is now wiped or bad. If just wiped then you will need to reinstall your operating system, OS X. If bad you will need to replace the drive.
    Start with booting the computer from the OS X install DVD that came with your system. If the Mac came with Lion Pre-Installed then you use the Lion internet recovery system to reinstall (Hold down Command+r keys or Command+Option+r keys to boot the computer from over the internet to the Lion recovery HD system).
    Good Luck.

  • HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

    I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

    If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it.  Also, try changing the password associated with the Apple ID that you were using for iMessage.

  • Replace a key that fell off keyboard

    Hi There,
    I can't seem to put back a key that fell off the keyboard of my daughter's graphite ibook. It doesn't seem broken but I wondered if there was a trick that I'm missing.
    Thanks
    macbook pro, imac, ibook   Mac OS X (10.3.9)  

    Sometimes these keys can be tricky to get back on. What you should be able to do is place the key exactly where it should go and then press down on it and it should snap into place without you even having to do anything. Unfortunately this doesn't always work, but with some attempts to get it back on you should usually get it.
    Sorry If I couldn't be of that much assistance.
    -Internet Wiz

  • Key Cap Popped off

    Does anyone know how to reinstall a key cap that popped off when the isight fell on it?
    Many thanks
    David

    Hi David,
    Check out this Apple article. It instructs in how to replace and remove keycaps.
    http://docs.info.apple.com/article.html?artnum=88106
    Ian

  • I need help with Creating Key Pairs

    Hello,
    I need help with Creating Key Pairs, I generate key pais with aba provider, but the keys generated are not base 64.
    the class is :
    import java.io.*;
    import java.math.BigInteger;
    import java.security.*;
    import java.security.spec.*;
    import java.security.interfaces.*;
    import javax.crypto.*;
    import javax.crypto.spec.*;
    import au.net.aba.crypto.provider.ABAProvider;
    class CreateKeyPairs {
    private static KeyPair keyPair;
    private static KeyPairGenerator pairGenerator;
    private static PrivateKey privateKey;
    private static PublicKey publicKey;
    public static void main(String[] args) throws Exception {
    if (args.length != 2) {
    System.out.println("Usage: java CreateKeyParis public_key_file_name privete_key_file_name");
    return;
    createKeys();
    saveKey(args[0],publicKey);
    saveKey(args[1],privateKey);
    private static void createKeys() throws Exception {
    Security.addProvider(new ABAProvider());
    pairGenerator = KeyPairGenerator.getInstance("RSA","ABA");
    pairGenerator.initialize(1024, new SecureRandom());
    keyPair = pairGenerator.generateKeyPair();
    privateKey = keyPair.getPrivate();
    publicKey = keyPair.getPublic();
    private synchronized static void saveKey(String filename,PrivateKey key) throws Exception {
    ObjectOutputStream out= new ObjectOutputStream(new FileOutputStream(filename));
    out.writeObject(key);
    out.close();
    private synchronized static void saveKey(String filename,PublicKey key) throws Exception {
    ObjectOutputStream out= new ObjectOutputStream( new FileOutputStream(filename));
    out.writeObject(key);
    out.close();
    the public key is:
    �� sr com.sun.rsajca.JSA_RSAPublicKeyrC��� xr com.sun.rsajca.JS_PublicKey~5< ~��% L thePublicKeyt Lcom/sun/rsasign/p;xpsr com.sun.rsasign.anm����9�[ [ at [B[ bq ~ xr com.sun.rsasign.p��(!g�� L at Ljava/lang/String;[ bt [Ljava/lang/String;xr com.sun.rsasign.c�"dyU�|  xpt Javaur [Ljava.lang.String;��V��{G  xp   q ~ ur [B���T�  xp   ��ccR}o���[!#I����lo������
    ����^"`8�|���Z>������&
    d ����"B��
    ^5���a����jw9�����D���D�)�*3/h��7�|��I�d�$�4f�8_�|���yuq ~
    How i can generated the key pairs in base 64 or binary????
    Thanxs for help me
    Luis Navarro Nu�ez
    Santiago.
    Chile.
    South America.

    I don't use ABA but BouncyCastle
    this could help you :
    try
    java.security.Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
    java.security.KeyPairGenerator kg = java.security.KeyPairGenerator.getInstance("RSA","BC");
    java.security.KeyPair kp = kg.generateKeyPair();
    java.security.Key pub = kp.getPublic();
    java.security.Key pri = kp.getPrivate();
    System.out.println("pub: " + pub);
    System.out.println("pri: " + pri);
    byte[] pub_e = pub.getEncoded();
    byte[] pri_e = pri.getEncoded();
    java.io.PrintWriter o;
    java.io.DataInputStream i;
    java.io.File f;
    o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pub64"));
    o.println(new sun.misc.BASE64Encoder().encode(pub_e));
    o.close();
    o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pri64"));
    o.println(new sun.misc.BASE64Encoder().encode(pri_e));
    o.close();
    java.io.BufferedReader br = new java.io.BufferedReader(new java.io.FileReader("d:/pub64"));
    StringBuffer keyBase64 = new StringBuffer();
    String line = br.readLine ();
    while(line != null)
    keyBase64.append (line);
    line = br.readLine ();
    byte [] pubBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
    br = new java.io.BufferedReader(new java.io.FileReader("d:/pri64"));
    keyBase64 = new StringBuffer();
    line = br.readLine ();
    while(line != null)
    keyBase64.append (line);
    line = br.readLine ();
    byte [] priBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
    java.security.KeyFactory kf = java.security.KeyFactory.getInstance("RSA","BC");
    java.security.Key pubKey = kf.generatePublic(new java.security.spec.X509EncodedKeySpec(pubBytes));
    System.out.println("pub: " + pubKey);
    java.security.Key priKey = kf.generatePrivate(new java.security.spec.PKCS8EncodedKeySpec(priBytes));
    System.out.println("pri: " + priKey);
    catch(Exception e)
    e.printStackTrace ();
    }

  • How can I get help with pending songs that have taken over 12 hours to fully download?

    How can I get help with pending songs that have taken over 12 hours to fully download?

    You can only suspend service for 3 months at a time (with or without payment) and only twice a year.

  • Need help with WMI code that will send output to db

    'm new to WMI code writing, so I need some help with writing code that we can store on our server. I want this code to run when a user logs into their computer
    and talks to our server. I also want the code to:
    * check the users computer and find all installed patches
    * the date the patches were installed
    * the serial number of the users computer
    * the computer name, os version, last boot up time, and mac address
    and then have all this output to a database file. At the command prompt I've tried:
    wmic qfe get description, hotfixid
    This does return the patch information I'm looking for, but how do I combine that line of code with:
    wmic os get version, csname, serialnumber, lastbootuptime
    and
    wmic nicconfig get macaddress
    and then get all this to output to a database file?

    Thank you for the links. I checked out http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx and
    found lots of good information. I also found a good command that will print information to a text file.
    Basically what I'm trying to do is retrieve a list of all installed updates (Windows updates and 3rd party updates). I do like that the below code because it gives me the KB numbers for the Windows updates. I need this information so my IT co-workers &
    I can keep track of which of our user computers need a patch/update installed and preferably which patch/update. The minimum we want to know is which patches / updates have been installed on which computer. If you wondering why we don't have Windows automatic
    updates enable, that's because we are not allowed to.   
    This is my code so far. 
    #if you want the computer name, use this command
    get-content env:computername
    $computer = get-content env:computername
    #list of installed patches
    Get-Hotfix -ComputerName $computer#create a text file listing this information
    Get-Hotfix > 'C:\users\little e\Documents\WMI help\PowerShell\printOutPatchList.txt'
    I know you don't want to tell me the code that will print this out to a database (regardless if it's Access or SQL), and that's find. But maybe you can tell me this. Is it possible to have the results of this sent to a database file or do I need to go into
    SQL and write code for SQL to go out and grab the data from an Excel file or txt file? If I'm understanding this stuff so far, then I suspect that it can be done both ways, but the code needs to be written correctly for this to happen. If it's true, then which
    way is best (code in PowerShell to send information to SQL or SQL go get the information from the text file or Excel file)?

  • Can i get help with 2 songs that i downloaded on my itunes? it didnt download, said there was an error and then is stuck at PURCHASED.

    can i get help with 2 songs that i downloaded on my itunes? it didnt download, said there was an error and then is stuck at PURCHASED.

    I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not downloading properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Mid 2011 macbook air. command key has popped off and is now missing the 2nd metal bar. can this be replaced?

    The command key popped off my mid 2011 macbook air. It is meant to have two metal bars but can't find the 2nd one. I have clicked it back into place but if I press the button at the bottom the top pops up and I'm worried that if I don't fix the problem I may end up losing the key altogether!
    Can you buy replacement metal bars? should I just remove the other bar completely?
    Thanks in advance.

    Sorry, must have been the crackpipe I smoked last night! LOL
    You won't see anything in the Application Support --> Bootcamp folder unless you have previously downloaded the Windows Support Software. Good find.
    ADDENDUM STEP:
    This step should be placed between 9-10.
    Open Bootcamp Assistant. Uncheck everything BUT, "DOWNLOAD THE LATEST WINDOWS SUPPORT SOFTWARE FROM APPLE". You will be prompted to burn the image to a CD/DVD or save to a USB Key. Save the image to a USB key. This will format your USB key properly in preparation for the files. The download commences and if you're lucky, the files will simply be saved to your USB key without having to manually copy them over to the key using the steps above.
    IMPORTANT - Even if the support software hangs when its being saved to the USB key, you should now be able to navigate to the directory and see the image. Follow the steps above.
    Apologies for missing this.
    Best,
    WBN

  • Help with Unique Key Insert!!!

    I need help with this <<removed by moderator>>
    When i try to do an insert "A" into a DB table, the transaction fills the info on creation mode, but is not doing the same at modification mode.
    Here i send the insert, i don't if the problems comes from sintaxis:
    INSERT zpsprctr_det FROM TABLE it_planif ACCEPTING DUPLICATE KEYS.
    tabal base datos es la zpsprctr_det
    Any ideas please let me know
    Moderator Message: Gun-to-the-head-deadline removed
    Edited by: kishan P on Mar 31, 2011 12:24 PM

    Hi,
    with
    INSERT dbtable FROM TABLE itab ACCEPTING DUPLICATE KEYS.
    you will insert several lines in a database table from an internal table. Duplicate keys are ignored, the 1st entry is written.
    To update them, you should use
    MODIFY dbtable FROM TABLE itab.
    This updates all lines that are existing or inserts all lines that are still missing.  If you have duplicate keys here, the last entry will do the last update.
    Regards,
    Klaus

  • Need help with generating keys from xml

    Hello,
    I am just learning about JCE and am haveing some problems with implementing a basic program.
    I have the following information:
    <RSAKeyValue>
    <Modulus>Base64EncodedString</Modulus>
    <Exponent>Base64EncodedString</Exponent>
    <P>Base64EncodedString</P>
    <Q>Base64EncodedString</Q>
    <DP>Base64EncodedString</DP>
    <DQ>Base64EncodedString</DQ>
    <InverseQ>Base64EncodedString</InverseQ>
    <D>Base64EncodedString</D>
    </RSAKeyValue>
    From which I need to construct a public and private key. I am using RSA algorithm for the encrypting and decrypting. I am using the org.bouncycastle.jce.provider.BouncyCastleProvider provider. Any help would be greatly appreciated.
    My questions are:
    1) Is it possible to create the public and private key from this data?
    2) How can I construct a public and private key from this data.
    Thank you in advance.
    Sunit.

    Thanks for your help...I am still having problems.
    I am now creating the public and private keys. I am generating the public exp, modulus, private exp, and the encrypted text from another source.
    so my questions are:
    1) How do I verfiy that the private and public keys that I generate are valid?
    2) How do I get the decrypted text back in a readable form?
    3) the decrypted text should read "ADAM"
    Here is a test I wrote:
    _________________STARTCODE_____________________
    import java.security.*;
    import java.security.spec.*;
    import javax.crypto.*;
    import javax.crypto.spec.*;
    import java.math.BigInteger;
    import org.bouncycastle.jce.provider.BouncyCastleProvider;
    public class CryptTester
         protected Cipher encryptCipher = null;
         protected Cipher decryptCipher = null;
         private KeyFactory keyFactory = null;
         protected PublicKey publicKey = null;
         protected PrivateKey privateKey = null;
         private RSAPublicKeySpec publicKeySpec = null;
         private RSAPrivateKeySpec privateKeySpec = null;
         public CryptTester()
              /* Create Cipher for asymmetric encryption (
              * e.g., RSA),
              try
                   encryptCipher = Cipher.getInstance("RSA", "BC");
                   System.out.println("Successfully got encrypt Cipher" );
                   decryptCipher = Cipher.getInstance("RSA", "BC");
                   System.out.println("Successfully got decrypt Cipher" );
                   keyFactory = KeyFactory.getInstance("RSA" , "BC");
                   System.out.println("Successfully got keyFactory" );
              }catch ( NoSuchAlgorithmException nsae)
                   System.out.println("Exception1: " + nsae.toString() );
              catch ( NoSuchPaddingException nspe)
                   System.out.println("Exception2: " + nspe.toString() );
              catch ( java.security.NoSuchProviderException nspe)
                   System.out.println("Exceptiont6: " + nspe.toString() );
              /* Get the private and public keys specs
              BigInteger publicMod = new BigInteger ("86e0ff4b9e95bc6dcbfd6673b33971d4f728218496adcad92021923a9be815ddb7ecf17c06f437634c62fa999a293da90d964172a21d8ce74bd33938994fbd93377f7d83ce93d523782639c75221a3c91b53927a081b2b089a61770c6d112d78d5da8a6abc452d39a276787892080d6cf17dd09537c1ec5551d89567345068ef", 16);
              BigInteger publicExp = new BigInteger ("5");
              BigInteger privateExp = new BigInteger ("50ed65fa2bf3710ead980a456b88dde62de4e0e9", 16);
              publicKeySpec = new java.security.spec.RSAPublicKeySpec( publicMod, publicExp );
              privateKeySpec = new java.security.spec.RSAPrivateKeySpec( publicMod, privateExp);
              try
                   privateKey = keyFactory.generatePrivate(privateKeySpec);
                   publicKey = keyFactory.generatePublic(publicKeySpec);
              }catch ( InvalidKeySpecException ivse)
                   System.out.println("Exception3: " + ivse.toString() );
              try
              * initialize it for encryption with
              * recipient's public key
                   encryptCipher.init(Cipher.ENCRYPT_MODE, publicKey );
                   decryptCipher.init(Cipher.DECRYPT_MODE, privateKey );
         }catch ( InvalidKeyException ivse)
                   System.out.println("Exception4: " + ivse.toString() );
         public String getPublicKey()
              //return new String(publicKey.getEncoded());
              return publicKey.toString();
         public String getPrivateKey()
         //          return new String(privateKey.getEncoded());
              return privateKey.toString();
         public String encryptIt(String toencrypt)
              * Encrypt the message
              try
                   byte [] result = null;
                   try
                        result = encryptCipher.doFinal(toencrypt.getBytes());
                   catch ( IllegalStateException ise )
                        System.out.println("Exception5: " + ise.toString() );
                   return new String(result);
              }catch (Exception e)
                   e.printStackTrace();
              return "did not work";
         public String decryptIt(String todecrypt)
                        * decrypt the message
              try
                   byte [] result = null;
                   try
                        result = decryptCipher.doFinal(todecrypt.getBytes());
                   catch ( IllegalStateException ise )
                        System.out.println("Exception6: " + ise.toString() );
                   return new String(result);
              }catch (Exception e )
                   e.printStackTrace() ;
              return "did not work";
         public static void main(String[] args)
              try
              Security.addProvider(new BouncyCastleProvider());
              CryptTester tester = new CryptTester();
              String encrypted = "307203c3f5827266f5e11af2958271c4";
              System.out.println("Decoding string " + encrypted + "returns : " + tester.decryptIt(encoded) );
              } catch (Exception e)
                   e.printStackTrace();
    _________________ENDPROGRAM_____________________

  • Help with working script that won't convert på higher version player (As2)

    HI have an issue with a file that was created some time ago to Fplayer v6 and when I now “upgrade” it to 8-9 or 10 it does not load the xml links ;/
    I have no idea why, the file(s) works fine in the old player 6
    I have a set of xml files (note: one file for each country on a map,and the possible solution should not include to put all links in the same xml file)
    the xml looks like this (example is for Denmark file called dk.xml):  [code]
    <broadcast>
    <story>
    <lead>www.alink.com</lead>
    <URL>http://www.alink.com/</URL>
    </story>
    </broadcast>
    So in the flash file I have a set of buttons the does a few actions
    one action is to call/go to a specific frame in a MC in that frame I put the Xl loading stuff for each frame (lable)
    [code]
    headlineXML = new XML();
    headlineXML.onLoad = myLoad;
    headlineXML.load("be.xml");
    function myLoad(ok) {
                                 if (ok == true) {
                                 Publish(this.firstChild);
    function Publish(HeadlineXMLNode) {
    if (HeadlineXMLNode.nodeName.toUpperCase() == "BROADCAST") {
    content = "";
    story = HeadlineXMLNode.firstChild;
    while (story != null) {
                                 if (story.nodeName.toUpperCase() == "STORY") {
                                 lead = "";
                                 URL = "";
                                 element = story.firstChild;
    while (element != null) {
    if (element.nodeName.toUpperCase() == "LEAD") {
    lead = element.firstChild.nodeValue;
    if (element.nodeName.toUpperCase() == "URL") {
                                 URL = element.firstChild.nodeValue;                                                                                                                   
    }                                                         element = element.nextSibling;
    content += "<font size='+2' color='#3366cc'><a href='"+URL+"'>"+lead+"</a></font><br>"+body+"<br><br>";
    txt.htmltext=content;
    story = story.nextSibling;
    the button (main stage)  that calles the MC frame lable with the xml that loads the load thex and a link into a dynamic txt box (called “txt”), has this code on it: [code]
    on (press) {
                                 infoon("DK");
    on (rollOver) {
                                 DK._alpha = 50;
    on (releaseOutside, rollOut, dragOut) {
                                 DK._alpha = 100;
    so as said it works fine in FP 6 (as2)  but when published to FP 8 -9 or 10 only the XML does not load at all
    What could be the issue (I know that it is old code and it is pretty poor and should be fully upgraded but my
    skills is not on that level, I managed to make the above work from some tutorials but understanding the publishing issues
    is a bit over my head J
    I would be extremely gratefull if anyone could help me out it is really frustrating especially since the file actually works fine
    in the old player ;/
    best
    OrsonB

    the two most common issues when converting from as2 vp 6 to as2 vp 6+ are:
    1.  failure to initialize some variable.  (if not explicitly initialized in vp 6, understood to be zero.  in vp+, it's undefined.)
    2.  vp6 is not case-senstive.  vp 6+ is case- sensitive.
    you have both.
    body is undefined and htmltext is not the same as htmlText.  fix those and retest.

  • Problem with restricted key-figure using off-set variable

    Hello Gurus,
    I have created a query in Bex Query Designer with a key figure restricted. This key figure shows me the 0amount value for the last month. When I select 003.2009, the key figure brings the 002.2009 values. I used an off-set variable to do this
    It works!
    But when I show this key-figure in Webi, no value shows up on the table.
    Any suggestions?
    tks
    Edited by: Allisson Valverde on Jul 23, 2010 12:12 AM

    Which variable are you using in BEx and in WEBI to restrict the month/year?

Maybe you are looking for

  • Updated Batch Characteristics on Order Release is not available in MSC3N

    Hi All, I have maintained the Class (023) and characteristics for Finished Material. When I am releasing the production order, I am assigning the values for batch characteristics (Custom defined characteristic) after that, If I go and see the corresp

  • Using odc:tabbedPanel   : event handling ?

    Hi , I am using <odc:tabbedPanel> for tabs , need some help on event handling when we click on any tab by using <odc:tabbedPanel> When tan is getting loaded want to do some server side coding , Any body has any idea on this ? Thanks, ....

  • INVALID OR MISSING .DLL INSTALLING NEW ODP 10.2 BETA

    Hi, We've been trying to install the new ODP beta and having a vairety of problems, some look like a corrupted .exe but my problem is 'invalid or missing dll' when I click on the beta .exe. No .dll is specified and I've changed the path, reinstalled

  • Report file path

    Hi, I inherited TestStand 3.0 code, which has been restored in new PC (old PC is completed gone, no settings, etc). The problem I'm having is that when the step completes, it prompts to select .XPS file (which I believe is the report file). I disable

  • BPELProcess_eng_wf_bpel_qtab

    Hi I am trying to use apps business event I am going thru the apps user guide and at certain point it says 'make sure that BPELProcess_eng_wf_bpel_qtab is deployed' i dont know what that process is ? any help