Help with a Mac mini (Power PC) loading to a blue screen

Okay, I've been reading and it sounds like I need to put my install disc in and boot from the disc. However, there are 2 complications:
1. I already have a disc in the drive. Is there any way to eject it manually without starting the OS?
2. I don't know where my install disc is. Can I use any Mac OS install disc? Does it need to be from the same version of the OS, e.g. I had Tiger, but will a Leopard disc work?
Thanks in advance
- Phil

To get the disc out, reboot while holding the eject key down.
Depends on the Leopard disc, if it came with an iMac for instance, it will not work. The discs that you get with a machine are for that type of machine only. You can't even go back to a previous OS version for the same type machine. A retail OS upgrade disc will work fine.
Apple can supply you with a new disc or you could just buy a retail version of Leopard.

Similar Messages

HELP! I need help with my Mac Mini G4

I have Mac Mini, and it ha OSX 10.5.6 installed. The x,-,+ signs are the colors they should be, but they dont show what they are when I mouse over them.. I have no idea how to fix this, cause I just got the computer. ALSO, it didnt come with any restore media, and the HD is a 40gb and there is 13gb free. I looked for Pics and documents, and there are none.. What else can it be??
Thanks, and PLEASE HELP!
Sincerely,
Ryan (Mac Newbie)
Message was edited by: ryn_adamson18

If the computer is second hand, some sort of UI modifications could have been made which disabled or changed the behavior of the window control buttons.
To help make some drive space, you might need to clear out some caches on the system. The application OnyX can help you with tasks like that and many others (possibly including fixing your window button behavior). To clean a bit more space, I suggest using Monolingual to remove languages you don't need, and you can also remove processor architectures you don't need - but be sure which architecture you have before you use that function.

Need help with Intel Mac mini... potential logic board failure...

Hey everyone! For the past couple years, I've been using an Intel Mac mini which I was able to afford before rough times hit for me. It has been a champ for a long time, until recently. In the past week, the clock would lose time ever so often, and last week, whenever I'd try to power it up in the morning (as I shut it down every night), it wouldn't start up most times (meaning, you hit the power, nothing... no LED, no fan, nothing on screen, nada). After a while, I would somehow manage to get it to start. I assumed at this point, the lithium battery (coin type CR2032, not the traditional 1/2 AA purple battery) was shot. Since I'm in the middle of a job transition, I was waiting until I had time to put in a new battery, which I was planning to do this weekend. Then Wednesday happened...
I go to start it, nothing... A week before this, I started losing time and sometimes it would not boot. I figured eventually I would be able to start it since I was able to sometimes get it to start after a half hour or more. That didn't happen. So I decided to go ahead and swap in the new battery. I do that, power it up, nothing. I reset the SMC (same as PMU on the PPC Macs), to no avail. I reseated the RAM, and did everything I could think of, but it's deader than Elvis. I also had took the power supply to a guy who had a voltimeter. He said voltage was getting to all pins.
I went back and read some of the archives on this board. Someone mentioned something about a repair exception. It mentioned that sometimes if you call AppleCare (even if you don't have it) and ask for a repair exception, sometimes they'll agree to have the logic board replaced due to it being a documented problem. How true is this and who should I contact?
Can anyone suggest anything here? If I can't revive the mini, I may have to drag my iMac back out and try to set it up to run OS X. I can't no where near afford another computer at this point. I'm praying the mini can be fixed. I would appreciate any and all suggestions!
Thanks in advance!
Tommy

It does sound like the logic board has gone bad. However, there are no current repair extension programs open on the Mac Minis.
This page lists the open extensions:
http://www.apple.com/support/exchange_repair/
So that's not an option. I assume that the Mini doesn't have AppleCare (whoops.), so I would not count on Apple covering it, but it's always worth a shot. You can call AppleCare (1-800-275-2273) or visit your local Apple Store

Help with new Mac Mini dock not responding!

Good day to you all. I took delivery of a shiny new Mac Mini on Friday and not having too many problems.....ish
The main problem is the dock not magnifying, it is set too, and having to click icons in the dock twice. All was working fine when I switched it off last night.
Any assistance gratefully accepted thanks
JIM

OK. I have installed flip for mac, firefox for mac, msn for mac, snapNdrag and real Player for mac. The keyboard and mouse are a non apple wireless usb kind, recognised straight away and working fine(I think)

HT1338 My new mac mini is freezing to a dark blue screen every time it goes into a sleep or inactivity mode.

If I leave the computer running with Safari open and walk away for 20 or so minutes it goes to the blank, dark blue video screen with the cursor still visible and movable. The only way i've found to get back to computing is to reboot the computer manually with the on/off button.
Thank you for your assistance...j

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

G4 power brick with Intel mac mini? is this possible just to test?

A friend gave me an Intel mac mini, 1.60GHz CPU model, but no power supply.
I tried using my G4 mac mini's 85W A1105 power supply on the intel mac mini but nothing happens. I have to unplug the power supply from the wall to get it to power on my G4 mac mini (it apparently doesn't like being plugged into the intel mac mini).
Is it possible to use the G4 2005 power supply with the Intel mac mini if only to just test to see if the intel computer works? I don't want to buy a MA407LL/A 110W intel mac mini power supply only to find that the computer he gave me is broken.
Just wondering if anyone had any tips/ideas how to tell if the Intel mac mini works at all or if I'm just going to have to find someone who has the 110W intel model supply to test it...

The G4 mini power supply is rated at a significantly lower current capacity than the Intel mini requires, thus while some have had marginal success in using an old supply with a newer system, almost any tolerance variation will mean the Intel box won't run with the G4 supply. Not only that, but since the Intel system will load the G4 supply at a level it was not designed to accommodate, you could damage your G4 supply by trying.
If you have an Apple store in your area, I would take the Intel mini to the genius bar there where it can be tested, thus avoiding you having to buy a new supply without knowing if it will work.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

Hello, since nobdy else has replied...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

I updated iTunes on my Mac mini power pc and it nolonger works with my ipod. I can no longer manage my music.

System SW said there was a new iTunes update so I updated and now I can't sync of manage my music on my iPod?
Mac min Power PC
Thanks,
Ken

In iTunes go to View>Show Sidebar.

Mac Mini will NOT Load

Hello Happy Mac People.
I am currently having issues with my Mac Mini.
Currently, in it's Superdrive Slot rests a disc that was meant to install a Microsoft Keyboard and Mouse combo that was wireless.
I know what you are going to say. Microsoft equipment. Yes, I know.
Anyway. After it asked me to restart said Mini to install the software, I do so....to a grey screen. No apple logo, no spindle. No nothing.
So I turn to my trusty Mac Mini guidebook!
Method 1: Restart. Tried. Didn't work.
Method 2: Restart while pressing Option and Apple and P and R. Tried. Restarted the mac with the second chime. Didn't work.
Method 3: Restart while pressing Option. Tried. Gave me the Macintosh HD to choose. Mouse happy to regain control of facilities. Pressed button under HD logo. Mouse hisses at me for being frozen again. No go.
Method 4: Unplug power cord. Press power. Replug power cord. Fan within Mac Mini becomes angry and goes full tilt. Turn off Mac Mini. Turn on Mac Mini. Fan still having words of anger with me. Turn off Mac Mini, unplug, turn on Mac Mini. Fan has reconciled it's differences, but still receiving grey screen at every step.
Please help. Need Mac. Windows Bad.
Lovingly,
John Martin
Mac Mini Intel Duo model.

Was the software for windows or OSX?
Software was for OSX. Was even in a .dmg
where you in Boot camp when this all occured, or are you trying to load the drivers for OSX?
Drivers for OSX
Sounds like something really crapped out. Did you try booting into single user mode
Never heard of. Will try. Rebooted. Pressed Command and S. Nothing. Pressed option and S just to make sure. Nothing. Mac Mini has appearantly become box that is silver and white that just so happens to be labeled with the apple logo. Not happy that computer has just become paperweight.
Here's the KB article that tells you how (basically hold the S key down when it boots up.
If you succesfully get into single user mode try running fsck (/sbin/fsck -fy)
Also try running the disk utility from the install disc, and/or the Apple Hardware Test also on the install disc.
To start AHT, reboot the computer and hold the option key down and select The Apple Hardware Test.
Something may have hosed your system, if that is the case you may need to reinstall OSX, if that is the case (I cannot imagine it is) just do an archive and install. This will preserve your home folder and user settings so you shouldn't lose anything. This of course should be your last resort.
This would work, if the install disc were not still in. Tried restarting to click mouse button to release prisoner disc. Mac Mini would not agree to terms. Install disc misses it's family.

I am having trouble with my Mac Mini's ethernet connection. Defining a new network interface shows no ethernet adaptor. Reloading SL from DVD repaired. But SL update lost ethernet again. Will Lion Fix?

I am having trouble with my mac mini ethernet. It had been working for weeks after an update to SL 10.6.8.
Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
But yesterday, after a power up. my ethernet was not working again. I tried this old trick to repair it, but the interface choices
listed for '+' a new service did not include Ethernet any more. And the Utilities->System Profiler->Ethernet Cards shows
no ethernet available.
As a last ditch effort i reloaded my original SL from DVD. (I think it was version 10.6.4 but i could be mistaken on the version).
The ethernet worked! But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
Now the Ethernet is not working again. I see the same symptoms as before with the Ethernet seeming not installed.
Is this a problem seen by others?
Would going to Lion fix the problem?
Could AirPort actually be the culprit and not SL?
If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?

Have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

My Samsung Sync Master 225UW's camera (webcam) won't work with my Mac mini

Hi,
I need help making my monitor's webcam work with my Mac mini. I have Mac OS X 10.5. When the computer launches the screen turns on, everything's perfect but the webcam will not turn on when I launch Photo Booth or iChat....what should I do?

That camera doesn't work with my mac either (I'm using it right now with a g4 powerbook, but will try again with my new power mac coming in... though I doubt it will make a difference)
The 225UW is specially made for Windows Vista, and I wonder if it needs a mac driver for the camera or something. We may be S.O.L. I knew that was a possibility when I ordered this monitor. Oh well... pay yer money... take yer chances.

Sleeping issue with new mac mini

i have a new c2d 2.0 mac mini all software is up to date. the first night i was able to put it to sleep without any problems but since then when i try to put it to sleep by eithre the apple menu or hitting (eject,apple,option) the dvd drive clicks and the mini wakes up all in 5 seconds.
another sleep problem is with both mac mini's (the c2d and g4 1.42) neither will go to sleep with an external harddrive connected (mounted or not and still powered on) I have looked for an answer to this problem for a while and have found nothing. i thought i saw a thread on this very subject but have yet to find it again
thanks for help
Nick

Hello,
It's nothing to really start worrying about, it's most likely down to a communication error between your hardware and your software. The simple solution is:
1) Unplug all cables from the computer, including the power cord.
2) Wait 15-20 seconds.
3) Press and hold the power button on the back of the computer
4) Whilst holding the power button, plug the power cord back into the machine
5) Release the power button
6) Press the power button once more to start up your Mac mini.
Everything should be sorted! (if not, call back here)
Good luck
-Pos

Mac Mini Power PC G4 1.5GHz issue

I received a Mac Mini Power PC 1.5GHz and for some reason it has an earlier OS X installed on it then what it originally came with. Right now it is running 10.3.9. Originally it came with a version of 10.4. I managed to get the original install DVD's for it but I cannot install them because they are bundled software and the Mac Mini doesn't realize it is a Mac Mini anymore because of the older OS being installed on it I believe. When I go to the "about this mac menu" it states that the computer is a PowerMac 10.2 and not a Mac Mini. I would really like to put the original software on it and get it sorted out but when I put the original install DVD in it says, "this software cannot be installed on this computer" and it is the right software, not the intel based software. Any ideas on how to restore this Mac Mini?

So I need what you have. These bundles seem pretty hard to come by. I have searched the web and haven't really found any sources for them.
If you call Apple support, they'll sell you a set for around $50. You may still be able to find a retail Tiger package for less than before Leopard came out, if you want to go that route. If you qualify for an educational discount, you might find a copy at a local university computer store.
I don't know if this additional information helps ... on the outside of the envelope containing the two discs, it says 2Z603-8387-A Mac mini Media; Multilingual. There's one other number on the other side of the bar code: PD11302005

Is there a USB 3.0 Hub that really works with the Mac Mini?

My Mac Mini's four USB 3.0 ports work fine with my four USB Seagate GoFlex 3.0 hard drives. The drives mount at startup, and perform at expected USB 3.0 speeds. But, when I connect the drives to a USB 3.0 HUB to free up the Mac's USB ports for other devices, typically two of the USB Seagate drives will mount at startup, but two won't. There's a fix for this: after startup, I simply disconnect AC power from the drives that didn't mount, and reconnect the power a few seconds later. Now all my drives are mounted, they perform properly, and other USB devices connected to other Mac Mini USB ports (a mouse, a USB midi interface) work just fine as well. It's annoying, though, to have to perform this extra disconnect-reconnect step every time. I've tried two different USB 3.0 HUBs -- one from Uspeed and one from Satechi -- and I have exactly the same problem with both. Question: Is anybody else experiencing the same thing with a late 2012 Mac Mini and a USB 3.0 Hub? Has anybody found a 3.0 Hub that doesn't have this issue with the Mac Mini?

The USB 3.0 hub instability problems extend beyond the Mac-Mini, as addressed below.
At long last we're seeing progress in getting 2012 Macs to work with USB 3.0 hubs. As discussed on this and other discussion groups I've had a horrible time with my MacBook Pro Retina being unstable with USB 3.0 hubs. I know many of you have also or you wouldn't be reading this posting.
In June 2012 I bought one of the first 2012 MacBook Pro's with a Retina display. It's been a battle since with Apple selling what appears to be an incompatible or unstable system to effectively communicate with the USB 3.0 hubs. You'll see vendors now making comments that Apple is the source of the problem.
I've been through USB 3.0 issues with two MacBook Pro Retina laptops. I've also tested a Uspeed hub, with 3 portable USB 3.0 drives connected, at the Apple Store. This was on a newer model MacBook Pro Retina, and also on a 27" iMac. All had instances where drives failed to mount during the short period allowed for testing. (Because of time constraints, we were unable to test at the Store for spontaneous and unprovoked unmounting of drives connected to the hub. These problems have existed since the beginning on my rMBP.)
I am now on my 20th hub that has been purchased, or provided for testing. They varied from 4-Port to 10-Port powered hubs and involved 11 brand names. Comments were posted on Amazon, Tiger, and others for most of the ones purchased, and some that were tested. Some, like the HooToo specifically warned against use with Macs in the manufacturer's manual and, as I learned, for good reason. That was reflected in my comments for the drive on Amazon.
The Plugable 7-Port USB 3.0 powered aluminum-finish hub that I have been testing since October 13 was provided by Plugable after the first one, purchased through Amazon, was returned as unreliable. This 3rd, and newer generation Plugable hub uses the VIA VL812 chipset with the new version 90.81 firmware. My experience over the last 4+ weeks with this hub has been solid. While there have been problems with Eject errors, none were traced to the hub electronics. (Problems with intermittent connections at the cable connectors appeared to be the cause of the disconnect errors. Almost all of the failures were traced to intermittent Micro-B connectors, but that's another story.)
In addition to the greatly improved reliability of this hub, I find several features of this Plugable to be a plus including:
The plug engages fully to the "hilt" when plugged into the hub giving a solid connection, as occurs on the MacBook Pro Retina USB 3.0 ports. Others hubs typically had a gap between the "hilt" of the connecting end, and the hub allowing for lateral movement. With some hubs this allowed for intermittent connections if the cable was disturbed.
The on/off switch on the hub allows the hub to be powered down when not in use.
The full size Type-B connectors on the cable at the hub end engage solidly. Hubs with Micro-B connectors have presented intermittent connections in the cable connector.
The aluminum case looks attractive with Macs, IMO, but not a reason to buy.
Overall, Plugable's support is the best I've encountered. I've found their response to questions to be prompt and thorough. This, coupled with their online support articles has put them at the top of my list. They provide news and information that I've not found with other hub vendors.
The article titled "Plugable USB 3.0 7 Port Hub Firmware History" at the below link gives insight into the history of the problems that we've been having with the USB 3.0 hubs on Macs and the firmware updates, regardless of the brand of hub you have. Apparently, if you have the VIA VL 812 chipset, firmware version 85.81, you're in safe territory.
http://plugable.com/2013/10/30/plugable-usb-3-0-hub-firmware-upgrades2
(One of the Plugable hubs appears identical to the black 7-Port Uspeed hub, and both use the VIA VL 812 chipset. They appear to be from the same manufacturer with the real difference appearing to be in the VL812 version of the firmware in the hub.)
Some of the firmware can be upgraded, and some can't. Contact Plugable or Anker if you're affected.
Uspeed has made improvements, but they were still unstable as of the last one I received for testing. In her last reply on 10/13/13 Sunnie with AnkerDirect Customer Support stated:
Unfortunately, the new Firmware version (908x) does not work with the model "68UNHUB-B7U" you have. The hub bellow has much less complaints about Mac issue. We suggest that you order this one.
http://www.amazon.com/gp/product/B009Z9M3DY
AnkerDirect Customer Support
Note that the above hub recommended by Anker has an 8th port just for charging iOS devices. Some will see this as a plus. However, the lack of such a port is not seen as a big problem. It's easy and relatively inexpensive to purchase extra 5V power adapters for charging, which is my preference. Plugging and unplugging devices on a hub that is powered "On" presents the potential for movement of the cables. This could interrupt a cable connection and disconnect a drive during data transfer resulting in corrupted files. With 7 and 10 port hubs, and all the cables needed, this gets risky.
I believe the USB 3.0 hub issues we're having are the result of poor design of the Mac's USB 3.0 implementation at the start. Unstable hubs that I've had a friend with Windows 7 test, said they "performed like a dream" on his PCs. This indicates the problem is with Macs, not the (twenty) hubs I've used.
A statement from a support person dealing with USB 3.0 hubs tells what's I've long suspected: " -- the evidence is pointing to something specific to the Apple design (perhaps external to the chipset, like the signal re-driver….."
If you're having USB 3.0 problems, be sure to let Apple know by sending in a Feedback comment to Apple at:
http://www.apple.com/feedback/
I'm told they read and treat the feedback seriously (although the duration of this USB 3.0 problem makes me wonder if Mavericks and iOS 7 haven't had a higher priority and distracted from this. Microsoft got USB 3.0 right, how about it Apple?)

My Apple blue tooth keyboard will not pair with my mac mini

My Apple wireless keyboard was paired with my Mac Mini. It is no longer paired. I have put in new Batteries. I have pressed the button on the top right hand section of the keyboard, the green led lights up briefly. The Blue Tooth set up assistant appears on screen and searches for the keyboard. I has brifly seen it but does not make a connection. The Magic moose is doing the same thing.

Hi Darrell,
If your Apple Bluetooth and keyboard are not paring to your Mac Mini, then take a look at the article below to walk you through some general troubleshooting to get it to pair and start working again. If you have not done so already, try looking form anything could be causing interference like cordless phones as well and thing metal between the keyboard and the Mac Mini.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/en-us/TS3048
Let me know if this helps or if you need further assistance,
-Norm G.

Help with a Mac mini (Power PC) loading to a blue screen

Similar Messages

Maybe you are looking for