Help with Allowing Multiple values Function

I am wondering if someone can help me with what I am doing wrong?
Basically I am trying to set up 4 parameters.
The first two say, if a 1 is selected then I want to pull back the full data set, if a 0 is selected then it should pull the department that is put in a parameter after that.
The same goes for a provider, if a 1 is selected then pull all providers, if a zero then select the providers that have been entered in the parameter below that.
I am using "Allow Multiple Values" for both the dept and provider if the 0 is selected for either.
Here is what I have been trying to use along with 4 parameters:
whilereadingrecords;
numbervar i;
numbervar j :=ubound({?Provider});
( (1 = {?AllDepartments})
OR
(for i := 1 to j do(
({Command.DEPARTMENT_ID} in {?Department}) ))
and
( (1 = {?AllProviders})
OR
(for i := 1 to j do(
({Command.PROV_ID} in Trim ({?Provider}<i>) )))))
Thanks you, any help would be appreciated.

Thanks for the advice Ian, I am trying to implement your code change with the following (this is just the first Department part)
IN SELECT
(IF {?AllDepartments} <> 0 THEN {Command.DEPARTMENT_ID} = {?Department} ELSE TRUE)
but I keep getting the following error:
"The remaining text does not appear to be part of the formula"
any thoughts?

Similar Messages

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

Allow multiple value in characteristic

I have created a characteristic with single value,but now i want to change it to multiple values.but it is not allowing me to do.how can i change??
Regards,
Vivek

Dear,
You need to remove he assignment from class, and then you can change the charectristics details.
Check where it is assigned like may be assigned to a class or MIC...first you have to remove the assignment, then remove the values, then only you can change it.

Won't let me change the "Allow Multiple Values" value

Iu2019ve run into a stumbling block regarding parameters tied to stored procedures. I am not able to change the u201Callow multiple valuesu201D field in the parameter option from FALSE to TRUE. The crystal reports developer only seems to want to allow me to change this value if I add a parameter field from scratch. However if I do this, then I end up with two parameter fields (one I added and one pulled in from my stored procedure). I am running Crystal Version 11.0.0.2495 (Crystal XI Release I)

Hi lisa,
You can't change allow multipul values option for stored procedure parameters. Since the parameters will come from your stored procedure and it will accept only one value.
You will be able to change this option when you create a parameter at report level.
If you want to pass multipul values to stored procedure parameter then you will have follow the following :
Create a main report and create a parameter at report level
Pass multipul values to creted parameter
Create a formula and pass the values to formula
Insert your report as sub report and link your sub report parameter with formul of your main report.
Thanks,
Sastry

Need help with turning multiple rows into a single row

Hello.
I've come across a situation that is somewhat beyond my knowledge base. I could use a little help with figuring this out.
My situation:
I am attempting to do some reporting from a JIRA database. What I am doing is getting the dates and times for specific step points of a ticket. This is resulting in many rows per ticket. What I need to do is return one row per ticket with a calculation of time between each step. But one issue is that if a ticket is re-opened, I want to ignore all data beyond the first close date. Also, not all tickets are in a closed state. I am attaching code and a sample list of the results. If I am not quite clear, please ask for information and I will attempt to provide more. The database is 10.2.0.4
select jiraissue.id, pkey, reporter, summary
,changegroup.created change_dt
,dbms_lob.substr(changeitem.newstring,15,1) change_type
,row_number() OVER ( PARTITION BY jiraissue.id ORDER BY changegroup.created ASC ) AS order_row
from jiraissue
,changeitem, changegroup
,(select * from customfieldvalue where customfield = 10591 and stringvalue = 'Support') phaseinfo
where jiraissue.project = 10110
and jiraissue.issuetype = 51
and dbms_lob.substr(changeitem.newstring,15,1) in ('Blocked','Closed','Testing','Open')
and phaseinfo.issue = jiraissue.id
and changeitem.groupid = changegroup.id
and changegroup.issueid = jiraissue.id
order by jiraissue.id,change_dt
Results:
1     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2008-07-16 9:30:38 AM     Open     1
2     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2008-07-16 11:37:02 AM     Testing     2
3     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2010-06-08 9:14:52 AM     Closed     3
4     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2010-09-02 11:29:37 AM     Open     4
5     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2010-09-02 11:29:42 AM     Open     5
6     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2010-09-02 11:29:50 AM     Testing     6
7     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2010-09-02 11:29:53 AM     Closed     7
8     23234     QCS-208     System Baseline - OK button does not show up in the Defer Faults page for the System Engineer role      2008-10-03 10:26:21 AM     Open     1
9     23234     QCS-208     System Baseline - OK button does not show up in the Defer Faults page for the System Engineer role      2008-11-17 9:39:39 AM     Testing     2
10     23234     QCS-208     System Baseline - OK button does not show up in the Defer Faults page for the System Engineer role      2011-02-02 6:18:02 AM     Closed     3
11     23977     QCS-311     Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks     2008-09-29 2:44:54 PM     Open     1
12     23977     QCS-311     Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks     2010-05-29 4:47:37 PM     Blocked     2
13     23977     QCS-311     Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks     2011-02-02 6:14:57 AM     Open     3
14     23977     QCS-311     Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks     2011-02-02 6:15:32 AM     Testing     4
15     23977     QCS-311     Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks     2011-02-02 6:15:47 AM     Closed     5

Hi,
Welcome to the forum!
StblJmpr wrote:
... I am attempting to do some reporting from a JIRA database. What is a JIRA database?
I am attaching code and a sample list of the results. If I am not quite clear, please ask for information and I will attempt to provide more. Whenever you have a question, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and the results you want from that data.
Simplify the problem as much as possible. For example, if the part you don't know how to do only involves 2 tables, then jsut post a question involving those 2 tables. So you might just post this much data:
CREATE TABLE     changegroup
(      issueid          NUMBER
,      created          DATE
,      id          NUMBER
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2008-07-16 09:30:38 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2008-07-16 11:37:02 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-06-08 09:14:52 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:37 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:42 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:50 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:53 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
INSERT INTO changegroup (issueid, created, id) VALUES (23234, TO_DATE ('2008-10-03 10:26:21 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (23234, TO_DATE ('2008-11-17 09:39:39 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (23234, TO_DATE ('2011-02-02 06:18:02 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2008-09-29 02:44:54 PM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2010-05-29 04:47:37 PM', 'YYYY-MM-DD HH:MI:SS AM'), 30);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2011-02-02 06:14:57 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2011-02-02 06:15:32 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2011-02-02 06:15:47 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
CREATE TABLE     changeitem
(      groupid          NUMBER
,      newstring     VARCHAR2 (10)
INSERT INTO changeitem (groupid, newstring) VALUES (10, 'Open');
INSERT INTO changeitem (groupid, newstring) VALUES (20, 'Testing');
INSERT INTO changeitem (groupid, newstring) VALUES (30, 'Blocked');
INSERT INTO changeitem (groupid, newstring) VALUES (90, 'Closed');Then post the results you want to get from that data, like this:
ISSUEID HISTORY
21191 Open (0) >> Testing (692) >> Closed
23234 Open (45) >> Testing (807) >> Closed
23977 Open (607) >> Blocked (249) >> Open (0) >> Testing (0) >> ClosedExplain how you get those results from that data. For example:
"The output contains one row per issueid. The HISTORY coloumn shows the different states that the issue went through, in order by created, starting with the earliest one and continuing up until the first 'Closed' state, if there is one. Take the first row, issueid=21191, for example. It started as 'Open' on July 16, 2008, then, on the same day (that is, 0 days later) changed to 'Testing', and then, on June 8, 2010, (692 days later), it became 'Closed'. That same issue opened again later, on September 2, 2010, but I don't want to see any activity after the first 'Closed'."
The database is 10.2.0.4That's very important. Always post your version, like you did.
Here's one way to get those results from that data:
WITH     got_order_row     AS
     SELECT     cg.issueid
     ,     LEAD (cg.created) OVER ( PARTITION BY cg.issueid
                                      ORDER BY      cg.created
              - cg.created            AS days_in_stage
     ,       ROW_NUMBER ()     OVER ( PARTITION BY cg.issueid
                                      ORDER BY      cg.created
                           )    AS order_row
     ,     ci.newstring                     AS change_type
     FROM    changegroup     cg
     JOIN     changeitem     ci ON   cg.id     = ci.groupid
     WHERE     ci.newstring     IN ( 'Blocked'
                       , 'Closed'
                       , 'Testing'
                       , 'Open'
--     AND     ...          -- any other filtering goes here
SELECT       issueid
,       SUBSTR ( SYS_CONNECT_BY_PATH ( change_type || CASE
                                                         WHEN CONNECT_BY_ISLEAF = 0
                                       THEN ' ('
                                          || ROUND (days_in_stage)
                                          || ')'
                                                     END
                                , ' >> '
           , 5
           )     AS history
FROM       got_order_row
WHERE       CONNECT_BY_ISLEAF     = 1
START WITH     order_row          = 1
CONNECT BY     order_row          = PRIOR order_row + 1
     AND     issueid               = PRIOR issueid
     AND     PRIOR change_type     != 'Closed'
ORDER BY issueid
;Combining data from several rows into one big delimited VARCHAR2 column on one row is call String Aggregation .
I hope this answers your question, but I guessed at so many things, I won't be surprised if it doesn't. If that's the case, point out where this is wrong, post what the results should be in those places, and explain how you get those results. Post new data, if necessary.

How to allow multiple values in a single blank cell in WebI report

Hi
I am working in BO XIR2. I have a scenario as follows.
In a single cell (blank cell from template) i need to display multiple contact persons. When I drag the contact person name into the blank cell, I am getting an error: MULTIVALUE). Please let me know how to use a function so that I can show two or three contact person names in a single blank cell.
I tried to use Replace and Char function as follows to bring Carriage Return functionality to the cell.
Replace([Contact Person]; ";" ; Char(13)) but this did not work.
Thanks in Advance.

BOUser11:
I know this thread has been answered. I recently came across a scenario where I happen to populate multiple values in a single blank cell(from templates). But the only catch being that if user enters multiple values for a prompt you can show them in a single cell eg: =UserResponse("Enter value(s) for Branch:"). would be the formula for the blank cell. Afetr the user selects three values say A, B,C, webi puts it in the format of A;B;C. in a single cell.
In your case try giving that as a prompt to the user or answer that multi prompt some how and when u use the above formula it should suffice your requirement.
Let me know if you have tried.
Thanks,
karthik

Help with running multiple threads

I'm new to programming with threads. I want to know how to run
multiple threads at the same time. Particularly for making games
in Java which I'm also begining to learn. For running multiple
threads at the same time, do you have to put two run() methods
in the source? If not then how do you make two threads or more
run at the same time?
Thanks for helping.

For running multiple
threads at the same time, do you have to put two run()
methods
in the source? Hi there,
Each thread is presumably performing a task. You may be performing the same task multiple times or be performing different tasks at once. Either way, each task would typically be contained within the run() method of a class. This class would either be a subclass of java.lang.Thread (extends Thread) or would be an implementation of java.lang.Runnable (implements Runnable). In either case, you would define a method with signature (public void run()...). The difference comes into play when you wish to actually perform one of these tasks. With a subclass of Thread, you would simply perform:
new MyTask().start();
With an implementation of Runnable, you would do this:
new Thread(new MyTask()).start();
This assumes you don't need to monitor the threads, won't be sending any messages to your tasks or any such thing. If that were the case, you would need to tuck away those returns to new MyTask() for later access.
In order to launch two threads simultaneously, you would have something along the lines of:
new MyTask().start();
new MyOtherTask().start();
Now it is perfectly possible that MyTask() would complete before MyOtherTask() managed to start in which case it wouldn't appear as if you had actually had multiple threads running, but for non-trivial tasks, the two will likely overlap. And of course, in a game, these tasks would likely be launched in response to user input, which means that you wouldn't have any control over when or in what order they executed.
Anyhow, it's as simple as that. You should also consider following the Java Threading trail which shows a simple example of using multiple threads. You can find it at:
http://java.sun.com/docs/books/tutorial/essential/threads/index.html
Regards,
Lynn

Derived Column : for Lookup type column with 'Allow Multiple Selection' : True in sharepoint list

Hello,
I have one column where field type is Lookup but 'Allow Multiple Selection' is true in SharePoint List.
So, in this scenario data from the SharePoint list is being exported as below.
1;#Red;#3;#Blue;#4;#Black;#5;#Green
Now resultant text exported to SQL Table should be :
1,3,4,5
OR
Red,Blue,Black,Green
Either way it is fine. How can we get this using Derived Column and Data Conversion?
I am able to do this for single occurrence using below expression.
(DT_STR,100,1252)(SUBSTRING([BusinessUnit],FINDSTRING([BusinessUnit],"#",1)+1,LEN([BusinessUnit])-FINDSTRING([BusinessUnit],"#",1)))
Please suggest.
Thank you,
Mittal.

Your best bet would be to do this in sql using a string parsing udf as below
http://visakhm.blogspot.com/2010/02/parsing-delimited-string.html
You can make it into procedure and call it from oledb command task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

OVS Value help with a preallocate value

Hi everybody,
i use a OVS Value Help whitch contains one field and a button for search.
Now i want to preallocate this field with a default value and execute the search automatically when the OVS View appears.
How can i do it?
Regards,
Sid
Edited by: Sid on Nov 7, 2011 1:05 PM

Hi Sid,
You can set default value to the field in value help within the method applyInputValues() and within this method, call onQuery() method which contains the logic for fetching the search results. Please find below the sample code for applyInputValues():
public void applyInputValues(IWDNodeElement applicationNodeElement, IWDNodeElement queryInputNodeElement)
     // On clicking Value help pop-up icon, get all the records from database
     wdContext.nodeDemoOutput().invalidate();
     queryInputNodeElement.setAttributeValue(IDemoInputElement.NAME, "<default_value>");
     onQuery(queryInputNodeElement, wdContext.nodeDemoOutput());
Hope this helps.
Regards,
Pavithra

Help with using multiple hard drives

Is there a way to install the OS on an "external" (expresscard SSD) drive, but have all of the library and data files on the primary hard disk? I LOVE the speed on my SSD, but it's a pain finding stuff now. Is this something a RAID configuration could help with?

mwmmartin wrote:
I have a 1 TB hard drive; but I have a 500GB and 250GB usb external hard drives.
Wouldn't it be cool if I could make the two external hard drives a RAID drive and use Time Machine to use all the 750GB of external memory to do my backups???
You can, but I would +*strongly recommend against+* it. See +Concatenated RAID+ in the Help for Disk Utility.
There are several potential problems:
Depending on how much data is on your 1 TB drive, 750 GB may not be enough to back it up. See #1 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
To set up a +Concatenated RAID+ set, both drives will be erased.
When (not if) either drive fails, you'll lose all the data on both.
Both drives must be connected any time you do a backup or want to browse your backups.
Especially with USB, if one drive wakes from sleep, or spins up, quickly enough, but the other one doesn't, the backup may fail and/or your backups may be corrupted.
For now, it looks like my only solution is to go buy a bigger external hard drive and spend more money,,,
That's your best solution +*by far.+* Anything else is taking a large risk with your backups.

Noob help with creating a new function module

Hi everyone,
I'm just learning SAP and trying to integrate a WMS system towards it and I'm losing hair over it hehehe
The scenario is that I want to extract Purchase Order Rows details and that's not a hard thing to do since there are multiple BAPIs that can be invoked, for example BAPI_PO_GETDETAIL.
I'm using .NET Connector 3 to talk to SAP.
The problem however is that I want to see how many articles that have already been delivered into the warehouse using BAPI_GOODSMVT_CREATE. There is no information returned when using BAPI_PO_GETDETAIL that specifies that a Purchase Order Row has a quantity of 30 and that 20 has already been delivered.
That information can be retrieved by using BAPI_GOODSMVT_GETITEMS.
The problem with using BAPI_GOODSMVT_GETITEMS is that it returns all of the rows and I am only interrested in retrieveing the rows with quantity for a specific purchase order.
So i decided to create my own BAPI or Function Module (or whatever it's called) that would take a PO_NUMBER and PO_ITEM and return the quantity of already delivered items. For example if one of the PO Rows (10) has 100 items and there has been 2 partial deliveries of 20 and 30. The function should return the value of 50 because it's the sum of 20 and 30.
My code looks like this:
FUNCTION ZBAPI_GOODSMVT_GETITEMS.
""Local Interface:
*" IMPORTING
*"     VALUE(PO_NUMBER) TYPE BSTNR
*"     VALUE(PO_ITEM) TYPE EBELP
*" EXPORTING
*"     REFERENCE(ENTRY_QNT) TYPE ERFMG
SELECT SUM( MENGE ) INTO ENTRY_QNT FROM MSEG
WHERE
EBELN = PO_NUMBER AND
EBELP = PO_ITEM.
ENDFUNCTION.
The problem is that when i try to Activate it it says:
REPORT/PROGRAM statement missing, or program type is INCLUDE.
What am i missing? Is there an easier way to extract already delivered quantities when extracting PO information?

A document was produced for Designer 7.1 and the principles still apply.
http://partners.adobe.com/public/developer/en/pdf/lc_designer_perf_guidelines.pdf
You can poke around here as well....
http://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm
Steve

Noob needs help with hosting multiple sites

Hello I am new to this multi hosting. I have looked on the forum for answers but haven't found any. I am trying to figure out how to host multiple sites. I have my dns working for my default site "example1.com", but need to know if I need to add another dns record for my second site. "example2.com". Also when I point to the new fold that has the second site in it and I assign it port 82 for testing purposes I get an error message saying 403 access forbidden. I need to find out how get permission to view the site for the public. Its in a separate folder on an external hard drive right now for testing purposes. Can any body help me or point me in the right direction? Thanks so much!!!
-Kcam1999

{quote}
While what you are telling him is technically functional, it is not correct
I beg to differ, Paul. You are the one that is not correct.
CNAMES have been deprecated as of some years ago
What? huh? really?
Please show me any official document that states this (and not someone who just started a rumor because he didn't understand them). Indeed, the DNS RFC makes no such claim.
{quote}
I stand very much corrected. CNAMEs are not officially deprecated. Interestingly, your post cites precisely what happens when CNAMES used carelessly. How many transactions are needed to resolve Apple's CNAME chain below? RFC1912 (http://www.faqs.org/rfcs/rfc1912.html) has some recommendations that suggests Apple's own network folks have, like me and perhaps even others here, some learning to do. Is that a 'best practice?'
{quote}> Then make sure you tell Apple since this site depends on the use of CNAMEs:
dig discussions.apple.com
discussions.apple.com. 492 IN CNAME discussions.apple.com.edgesuite.net.
discussions.apple.com.edgesuite.net. 4427 IN CNAME a1399.b.akamai.net.
a1399.b.akamai.net. 2 IN A 128.241.220.82
a1399.b.akamai.net. 2 IN A 128.241.220.72
In fact, it uses TWO CNAMES in a chain. Oh my.{quote}
From RFC1912 (which I'm sure many have now read here), section 2.4 is as follows:
{quote}... having chained records such as CNAMEs pointing to CNAMEs may
make administration issues easier, but is known to tickle bugs in
some resolvers that fail to check loops correctly. As a result some
hosts may not be able to resolve such names.{quote}
{quote}> It is not valid to say "don't use these because they could cause problems'. A records can be just as problematic, as can PTRs. Let's not even talk about MX.{quote}
How, exactly, does is an A record problematic? No chains, no additional lookups, no wasted cycles...
We differ here -- and if we are dealing with a newbie, we don't need to enter into unnecessary complexity UNTIL it is a requirement for their solutions.
{quote}> There are many valid reasons to use CNAMEs in DNS, not least of which is the ease of moving a service if it uses CNAMEs. For example, if you have 10 A records all pointing at the same server and you want to migrate to a different machine you have to locate and update all 10 records. If they used a CNAME to the physical server you could move them all at once using a single change. This is especially important in cross-domain links where you may not control all the origin zone files.
{quote}
You're somewhat reaching here, and it is well beyond the scope of the OP's post or needs (well, until they tell us more about their needs, I suppose). There is nothing difficult about 'finding' and updating the necessary records. The final example you gave is a good one and I'll say THAT is an appropriate use of a CNAME, 'though there are other workarounds for it.
Thanks for keeping me honest.

Help Required - Upload Multiple Documents functionality sometimes disappears in SharePoint 2010

Hi All,
We have a web application created in SharePoint 2010 & there we were facing an issue of not able to Upload multiple documents. After doing search on google, we have found that
pre-requisites for this functionality to be working properly are as follows:
Client Integration needs to be enabled for the web application.
The STSUpld.UploadCtl IE add-in must be enabled. (located in C:\Program Files (x86)\Microsoft Office\Office12)
The 32 bit version of Internet Explorer. The 64 bit version does not support it and neither do other, non IE, browsers.
Office 2003 or newer on the client.
After meeting all the above requirements, We are now able to see the Upload Multiple Documents link but we are failing in below 2 scenarios:
On some machines it is working fine & on some it is not.
On some machines, this option is available for sometime & sometimes it disappears.
If any one of you have experienced the same problem, then please help us with your valuable suggestions & possible solution for it.

Hi Manish,
We've just been experiencing your initial issue with Office 2007 clients not being able to use the multi-file upload functionality. Sure enough....turning on presence information in Central Admin fixes the issue. The strange thing is though that
when presence is turned off, Office 2003 and 2010 clients still work fine and it's only 2007 clients that fail. Also this issue appeared to only exist for us inside applications that have been upgraded from MOSS2007 to SP2010. Any new applications
of even new site collections within an upgraded application worked fine across all 3 Office versions.
Coincidently, we're also experiencing the more recent issue you've come across with files not uploading after clicking OK in the ActiveX. Nothing happens. Office 2010 clients work fine but 2003 and 2007 clients just don't upload the selected
files. We've found a workaround which "fixes" the issue but brings it's own set of problems so it's not ideal. Here's what we've done...
1. Open IIS, and navigate to the web where you want to use multi-file upload
2. Select Handler Mappings and Add Script Map
3. Set Request Path - shtml.dll
4. Set Executable - C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI\SHTML.dll
5. Set the name to something meaningful - Multi File Upload
6. Leave the Request Restrictions as default
This should fix the issue with files not uploading but unfortunately it also prevents SharePoint Designer from accessing the site. For the application where we desperately need multi-file upload we can manage without SPD access so it's not the end
of the world but not ideal. We've actually got an outstanding incident logged with Microsoft to resolve this issue but they've yet to find a solution for us. We suggested to MS that we update authentication to Kerberos from NTLM and retry as we
seem to be getting 401 errors in the call stack so thought that could be related. We've not yet configured Kerberos so I'm not sure whether this is a solution or not.
One other point worth mentioning is that SharePoint Designer 2010 (which is free) installs the latest version (14) of the Upload ActiveX and with this installed the uploads work as expected. Also if you have Silverlight and SPD2010 installed then you
get a Silverlight control to do the upload which also works fine. Again, not ideal as rolling out SPD 2010 to affected clients isn't really a suitable solution.
Sorry I can't be any more help. Hopefully my findings might point you in the right direction. If you do find a solution (other than the IIS handler mapping) then please re-post here,
Good luck,
Ben

Help with loading multiple images via LoadVars

Hello everybody.
I need a hand loading multiple images using the LoadVars
method with a text file. I can get it to load 1 image but not
anymore than that. I am aware of other methods like using
components but I am looking for a method where I can access and
change all data from 1 text file (there will be text variable text
within the file aswell to, but I am more concerned with the images
at the moment).
Anyway on to the issue. I have created a much simple .fla
file that outlines my problem.
The movie contains 3 layers:
- top layer contains AS
- middle layer contains an empty movie clip with the
instance name of mcImage1
- bottom layer contains an empy movie clip with the instance
name of mcImage2
The AS layer contains the following code:
imagedata = new LoadVars()
imagedata.load("data.txt")
imagedata.onLoad = function(ok){
if(ok){
mcImage1.loadMovie(this.Image1)
mcImage2.loadMovie(this.Image2)
} else trace("Problem Loading")
In the same folder of my .swf file I have a text file called
data.txt which contains the following
&Image1=image1.gif
&Image2=image2.gif
Also in the same folder of my .swf file I have two images
image1.gif and image2.gif.
When I run the flash the image2.gif is imported correctly.
image1.gif does not appear.
You can download my source files and all images here
http://www.myrealpage.com/projects/var_test/var_test.zip
Any help that can be shed on this problem is much
appreciated.
Thanks
Matt

Glad to help. It is just that I see so many folks who have
two different parts of a problem smushed together – each
problem isn't so hard on its own, but together they are difficult
to wrap your head around. Always try and break down each step of
the problem and it will help you in the end.
That being said, I'm not quite so sure on this next problem.
I don't do so much timeline stuff along with the Actionscript. I
can get tricky. So this I don't quite have as much of clear mental
picture of what you are describing. But here are some questions
that I would ask – either of myself if I was doing it or of
you.
Is there a stop() on frame one to wait for the
LoadVars.onLoad? Does the onLoad then say to play?
If not, what happens if we get to Frame 10 before the
LoadVars has even finished? That could be a problem.
Remember that the LoadVars object is an actual object that
will exist until it is deleted or removed in various ways. You can
access it at any time after it is loaded. The onLoad event handler
is just that thing you want to happen immediately after it is
loaded.
So my design would probably be.
LoadVars on Frame 1.
Where I am stopped.
In the onLoad handler load the first image and tell the
timeline to play
On frame 10, the LoadVars object will still exist (unless
you've deleted it)
Get the variable out of the LoadVars and load the image.
If you want to check this. Put a stop() in frame 10 and run
it in the testing environment. When it gets to that frame, go to
the debug menu and List Variables. You should see that your
LoadVars object is still there.
Does that answer your question or am I totally missing the
point?

Help with hosting multiple versions of the same schema

Hi Allâ¦
I have a problem that I need some help/advice on how to manage it. I have scoured the forums here but only found bits and pieces of what Iâm trying to do.
Basically I have a small application that I am hosting the database for. As each client comes online I need to create a schema for them. I have written the application so that it does not reference the schema name (assumes ownership or public/private schema). If you log in as the owner then everything is fine. However I am at the point now that I would like to start overhauling the security so that I can support and manage the different users logging in. I currently have after update triggers on all tables that sets the user_id/timestamp for auditing issues.
I have a few different scenarios that I need to be able to support as far as clientele.
1)     I host database: 1 client = 1 schema
2)     Client hosts database: 1 client = 1 schema
3)     Client organization hosts database: 1 dept = 1 client = 1 schema (same as 1 except client organization is hosting database). The department are so different (budget, staff, different support contract) that they are different customers but their organization is so big they have large outsourced databases.
4)     There is also the chance that 1 client might allow the same user (single oracle account) access to two versions of the application.
I also have two versions of my software, client/server and an under development distributed/web-based. I need a single solution that works best across both platforms
Anyhow I have been warned that creating private synonyms will become a nightmare once there are lots of users. I also donât want to log in as the schema owner as that too will become very difficult to manage security/rights (especially on a web based system).
I also need a solution that is simple to manage and will fit with the âgenericâ client that hosts their own database.
These are the solutions I see right now:
1)     new instance for each schema â not cost effective and probably not satisfactory for large clients
2)     Re-write all sql statements to use a master stored proc that then dynamically forwards to appropriate schema â sounds gross
3)     Somehow altering my sql statements at runtime to âmodifyâ the schema name dynamically â lot of re-work and difficult to debug
4)     FGAC â sounds perfect but competing clients arenât going to accept that for security/privacy etc no matter how safe I tell them it is.
5)     Using some sort of ALTER SESSION SET CURRENT_SCHEMA and tricking the database to thinking someone else is logged in? â this is the one I found in the forums but havenât found much else on. How is this different than just logging in as the owner?
In my perfect world I think I would want to be able to point roles at certain schemas. But Oracle doesnât seem to support that. Then I could have companyOneReadOnly = company1schema + all the read-only privileges.
Anyhow any help is greatly appreciated.
Thanks
jack

Hi Kim,
May be you can try this and see if this works for you. I am not 100% sure if it will work for you, but worth a try I guess. Create a Test WebDynpro project and try the following steps on this project. If they work out correctly and serve the purpose for you only then try them on your actual Web Dynpro project.
1. Create a test Web Dynpro project say "TestWDProject" with Component say "Comp1" and the default views and windows etc.
Also create some working application our of this component and Windows using the Context.
2. Right click the "Comp1" and select Copy.
3. Right click 'Components" node in the project structure and select "Paste"
4.This step will try to paste the copy of Comp1 as a new Component.
5. You can change the Name and Package of the Component.
6.Similarly you'll get the prompts for views,windows etc.
7.Once you have copied everything, Just check if everything looks good.
8.Now you can create a new Application using this new component and the Component Interface View and Deploy it.
9.Test whether the Application created out of this copy works same as the original component.
You can also try to create another Web Dynpro project and paste the Comp1 in the Components node of that new project and perform the same steps.
Again, try with these Test Projects and see if this serves your purpose before applying the steps on actual projects.
Regards,
Ajay

Help with Allowing Multiple values Function

Similar Messages

Maybe you are looking for