OVS Value help with a preallocate value

Hi everybody,
i use a OVS Value Help whitch contains one field and a button for search.
Now i want to preallocate this field with a default value and execute the search automatically when the OVS View appears.
How can i do it?
Regards,
Sid
Edited by: Sid on Nov 7, 2011 1:05 PM

Hi Sid,
You can set default value to the field in value help within the method applyInputValues() and within this method, call onQuery() method which contains the logic for fetching the search results. Please find below the sample code for applyInputValues():
public void applyInputValues(IWDNodeElement applicationNodeElement, IWDNodeElement queryInputNodeElement)
     // On clicking Value help pop-up icon, get all the records from database
     wdContext.nodeDemoOutput().invalidate();
     queryInputNodeElement.setAttributeValue(IDemoInputElement.NAME, "<default_value>");
     onQuery(queryInputNodeElement, wdContext.nodeDemoOutput());
Hope this helps.
Regards,
Pavithra

Similar Messages

Need help with NULL values in Crosstables

Hello everybody,
I need some help with NULL values and crosstables. My issue is the following:
I have a query (BW - MDX-Query) that gives me turnover measures for each month. In Crystal Reports I choose crosstable to display this whereby I put all month in columns and all turnover-measures in rows. Each month that has a value (measures are not empty) is chown in the crosstables rows. So far so good. The problem occures when there are month that actually have no values (measures are empty). In that case these months are not chown in columns. But I need CR to display these columns and show the value 0. How can I do that?

Hi Frank,
Cross tab shows the data based on your column and these column fields are grouped and based on the group it will show your summaries.
If there is no data for any of your group it will not display that group. In this case you will have to create a standard report which should look like cross tab and to get zero values you need to write formulas .
Example if you want to display Moth wise sales :
if Month() = 01 Then
sum() else 0
Now this formula will check if your month is Jan, then it will sum up the values else it will display zero value.
This is possible only through standard report not with Cross Tab.
Thanks,
Sastry

Ovs value help in adobe forms

Hi all,
I am able to get the standard value help from sap on interactive form..
But how to get the ovs value help for any field created in webdynpro on interactive forms..
Pls help me reg this..
Thank you

Have a look at this link from the online help:
[http://help.sap.com/saphelp_nw70/helpdata/EN/42/fb2fe500553ee4e10000000a1553f7/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/42/fb2fe500553ee4e10000000a1553f7/frameset.htm]
You have to be sure you are using the ZCI form type, but then it allows you to link the value help trigger within the adobe form to the Web Dynpro value help. The same functionality is simply not available in the older ACF form type.

Need help with LikeFilter for querying the keyset instead of value

Hi,
I'm looking for help with the LikeFilter.
I need to query the cache to get all entries with key starting with a particular string.
I could see samples using LikeFilter for querying the values in the cache but not the keyset.
Can someone help?
E.g:
Cache Entries:
abc123 - value1
abc234 - value2
bcd123 - value3
I want to get all entries with key starting with 'abc'.
thanks,
rama.

NJ, thanks for the quick reply.
I tried something similar (as below) but this code gives me 'java.lang.NoClassDefFoundError: com/tangosol/util/ValueExtractor'.
KeyExtractor extractor = new KeyExtractor("getKey");
Filter filter = new LikeFilter(extractor, id+":%",'-',false);
-rama.
Edited by: 911950 on Feb 2, 2012 1:18 PM

Need help with the session state value items.

I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?

You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM

How to read the 'Input help with fixed values' of domain .

How to read the 'Input help with fixed values' of domain .
The domain has a Value range i want to read those values .
Are these values stored in any table ?
Plz help me i need it ver badly...
Thanks in Advance...

Hi Chandra Shekhar,
To read the 'Input help with fixed values' of domain , you can use the function module : HR_P_GET_FIXED_VALUE_TEXT.
iIf you enter the domain name, you will find the fixed values entered in the domain.
These values are stored in a table DD07L(DD zero 7 L). Here the values are stored based on domain name.
See if it works for you.
Award points if its helpful.
Regards,
Bhanu

Value help with short text

Hi gurus,
I'm trying to create a input value help with the records from my internal table but I woulkd like also to put the short when the popup displays.
Actually I only have the records.
SELECTION-SCREEN BEGIN OF BLOCK ref WITH FRAME TITLE text-t03.
SELECT-OPTIONS:
                s_kstar FOR i_cska-kstar.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_kstar-low.
PERFORM search_kstar USING s_kstar-low.
FORM search_kstar
                 using kstar type cska-kstar.
SELECT * FROM cska
               INTO CORRESPONDING FIELDS OF TABLE i_cska
               WHERE kstar LIKE '08%'
               OR    kstar LIKE '008%'
               OR    kstar LIKE '0008%'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield    = 'KSTAR'
      dynprofield = 's_kstar'
      dynpprog    = sy-cprog
      dynpnr      = sy-dynnr
      value_org   = 'S'
    TABLES
      value_tab   = i_cska.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'HELP_VALUES_GET'
       EXPORTING
            fieldname        = 'KSTAR'
            tabname          = 'i_cska'
       IMPORTING
            SELECT_VALUE     =   kstar.
ENDFORM.                    " SEARCH_KSTAR
Anybody would a solution.
Thx in advance for your help.
Mohamed.

Hi Mohamed,
Check the Following.
" Implement your own search Help as below
PARAMETERS : carrid TYPE spfli-carrid,
             connid TYPE spfli-connid,
             fldate TYPE sflight-fldate.
DATA : itab TYPE TABLE OF sflight WITH HEADER LINE.
DATA : fmap TYPE TABLE OF dselc WITH HEADER LINE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR carrid." If it is a selection Screen
else in PROCESS ON VALUE REQUEST
SELECT * FROM sflight INTO TABLE itab.
SORT itab BY carrid connid fldate.
DELETE ADJACENT DUPLICATES FROM itab
COMPARING carrid connid fldate.
fmap-fldname = 'CARRID'.
fmap-dyfldname = 'CARRID'.
APPEND fmap.
fmap-fldname = 'CONNID'.
fmap-dyfldname = 'CONNID'.
APPEND fmap.
fmap-fldname = 'FLDATE'.
fmap-dyfldname = 'FLDATE'.
APPEND fmap.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
     ddic_structure         = 'SFLIGHT'
      retfield               = 'CARIID'
*     PVALKEY                = ' '
     dynpprog               = sy-repid
     dynpnr                 = sy-dynnr
     DYNPROFIELD            = 'CARRID'
*     STEPL                  = 0
*     WINDOW_TITLE           =
*     VALUE                  = ' '
     value_org              = 'S'
*     MULTIPLE_CHOICE        = ' '
*     DISPLAY                = ' '
*     CALLBACK_PROGRAM       = ' '
*     CALLBACK_FORM          = ' '
*     MARK_TAB               =
*   IMPORTING
*     USER_RESET             =
    TABLES
      value_tab              = itab
*     FIELD_TAB              =
*     RETURN_TAB             =
     dynpfld_mapping        = fmap
*   EXCEPTIONS
*     PARAMETER_ERROR        = 1
*     NO_VALUES_FOUND        = 2
*     OTHERS                 = 3
            ." Just Execute this pilot program and verify
IF sy-subrc 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Cheerz
Ram

SVS, EVS, and OVS, Value Help and Search Help

what and how to use SVS, EVS, and OVS, Value Help and Search Help in abap webdynpro...Can anyone please give example link or document...As i am able to get on ovs but unable to get rest of other

SVS and EVS are Web Dynpro Java specific types of value help. They do not exist in Web Dynpro ABAP. In Web Dynpro ABAP we have Data Dictionary based Search Help, OVS, and Freely Programmed Value Help. In WDA 7.02 we have the slight variant on DDic Search Help called Suggest Values. It doesn't change the development model, just the runtime user experience.
You can read more about each of the types of WDA based value help in the online help:
http://help.sap.com/saphelp_nw73ehp1/helpdata/en/47/9b298c66eb3376e10000000a421937/frameset.htm

Need help with clickbios ii terminolgy and values. Z77A-GD65 / 3770k

Hello All
I recently purchased a Z77A-GD65 board and after searching I've found the differences in terminology between this and my previous Asus board but still have a couple of settings I cant find any info on.
System Specs:
motherboard: msi z77a-gd65
cpu: intel 3770k
ram: corsair vengeance 2133mhz 1.5v
psu: corsair 850w
First things first is I believe I am running in turbo oc mode. I've selected the oc genie tab on the center right of the bios screen and proceeded to change settings there. With cpu voltage on auto and vdroop set to 50% at 4.6ghz. (I'll try and get screenshots of bios settings soon)
The following are the terms I need help with:
In the my oc genie section;
1. Long duration power limit
2. Long duration maintained
3. Short duration power limit
In the main overclocking section;
4. Digital Compensation level (not in owners manual, options auto/high)
5. Cpu core ocp expander (enabled for overclock 4.5ghz+?)
In the CPU Features section;
6. long duration power limit w (does "w" stand for watts?)
7. long duration maintained s (does "s" stand for seconds?)
8. short duration power limit
9. primary plane current limit a (does "a" stand for amps?)
10. secondary plane current limit
11. primary plane turbo power limit
12. secondary plane turbo power
I know those are a lot of settings, but would appreciate any simple definitions as to what they do and recommended values for mild overclocking (4.5-4.80)
Also on my previous board (Asus P8P67 Pro) my 3770k was stable in prime95 for 18 hrs at 4.5ghz fixed 1.155v with only ram timings put in manually and LLC set to extreme.(or whatever max is called in asus bios) Voltage was fixed and everything else was defailts.

Well I'm back. Been digging around for a few days and found some answers to my questions.
First things first s that for some reason I could not adjust voltage values with the + or - symbols. Clearing cmos did not help this. I had to reflash the bios to get this functionality back as well as clearing cmos before and after the flash.
So I figured out the values in the oc genie section are the same as the normal section but only used when your using the oc genie. (numbers 1-3)
Digital compensation level and ocp expander should be set to high and enabled respectively when going for higher overclocks. (4 and 5)
Now for the rest of my questions ( 6 through 12) I have found suggested settings and some info after hours and hours of searching but still have a couple of questions about them.
Long/short duration power limit, and primary/secondary plane turbo limit. I see suggestion settings of 250 or 255. I take it this is simply max supplied watts to the chip? If so why the 250/255 values? Is that the highest the board will give? Is plane turbo limit related to the enhanced turbo stated and how much wattage can be drawn there while the other limit is for any non turbo frequencies?
Long duration maintained, I've seen 60 suggested a lot. Why is this?
There's not an over abundance of info on these boards as compared to asus so it seems info is a little less documented and video tutorials explaining things are next to none.
Any help would be appreciated. Thanks

I am a rookie and need help with max and min values

Hello all, i am into this intro to java class. my assignment is to write a program that prompts the user for two integers and then prints the sum, difference, average, product , distance (absolute value of the difference) Maximum(largest of the two) and Minimum(smallest fo the two) here is my code so far
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.lang.Math;
public class Sample4
   public static void main(String[] args) throws IOException
      try // attempt the following
{           // create the stream to read from
InputStreamReader istream = new InputStreamReader(System.in);   // create a buffer to hold the stream
BufferedReader console = new BufferedReader(istream);           // prompt the user
      System.out.println("Enter a number please");              // get input as a string
      String input = console.readLine();                        // convert to an integer
      int num1 = Integer.parseInt(input);
      System.out.println("Enter a number please");              // get input as a string
      String input2 = console.readLine();                       // convert to an integer
      int num2 = Integer.parseInt(input2);
      int sum = num1 + num2;                                    // get the sum of the two inputs
      int difference = num1 - num2;                             // get the difference of the two inputs
      int product = num1 * num2;                                // get the product of the two inputs
      int average = sum / 2;                                    // get the average of the two inputs
      int abs = Math.abs(difference);                           // get the absolute value of the two inputs
          // new section
             // display the number
      System.out.println("The total sum = " + sum);
      System.out.println("The total difference = " + difference);
       System.out.println("The total product = " + product);
       System.out.println("The total average = " + average);
       System.out.println("The total absolute value = " + abs);
} // if something breaks, catch the exception
catch (IOException e)
   System.out.println(e); // displays the exception
   System.exit(1); // quits the program
}what will be the right syntax or code to find the MAX and MIN values of two numbers a User Inputs, hope someone can help with this. thank you for your help.

Thanks alot man, sheesh i do not know why my book
doesnt give me all the static methods. but i do really
appreciate your help. peaceA complete list of the java.lang.Math methods can be found at http://java.sun.com/j2se/1.4/docs/api/java/lang/Math.html
btw,
max(a, b) == (a > b) ? a : b
min(a, b) == (a < b) ? a : b

Trigger OVS Value Help by pushing a button?

Hello Experts,
I need to open a OVS value help when a button is pressed instead of prushing F4 in a regular input field.
Is this possible?
Thanks
Johannes

Hi Johannes Schnatz ,
you cant call a OVS search help in the button action ,
1. the instance attributes populated by system based on the context attribute which instantiate the OVS ,
2 .you cannot assig the ovs event to your button action method
3. if you try to call the OVS event handeler in your action method it will throw dump as
Parameter OVS_CALLBACK_OBJECT contains an invalid value
may be some expert can throw light if i am wrong ,
Regards
Chinnaiya P

Problem with OVS search help.. pls help..

Hi friends, I have a prblem with OVS component layout
can some tell me create another COPY button just under the search button on OVS.
Basically in my product search.. there is already an OVS component created.. in the Z component layout.. jus the result table is been designed. I dnt see any other UI elements availble in that layout. (like input field to accept vaules on OVS), .. so i was wondering how to create a new button.
this was developed by others;s so .. i m fighting with this and not able to get anything from sdn aswell.. pls help me.
And also when they enter values in input fields.. instead of clicking search.. they wanted to hit ENTER key on keyboard... and result shoud display.. how to achieve this..
sorry im very sorry but pls take out some time and help me out.
I want one more button COPY on OVS search help. just under the SEARCH button... and also the search shud start once i hit ENTER key on keyboard.
pls help on this.
Niraja

Hi Niraja,
As how discussed in the email we can get this additional push button as how desired by enhancing the standard component WDR_OVS. Just click on the "Enhance" (spiral kind of button) button present in the application toolbar & create an Enhancement Implementation for the component. Now within this standard component you have the corresponding layout present in the SEARCH view. So go to this view & make the necessary changes. From now on what all components which declare a component usage of the WDR_OVS would be getting this newly modified UI & functionality.
Regards,
Uday

F4 Help with OVS in WDR_SELECT_OPTIONS

Hi
I realized an OVS-F4-Help in WDR_SELECT_OPTIONS.
The Event on_ovs is raised and if I use table_multi_select = abap_false
      i_ovs_data-m_ovs_callback_object->set_configuration(
                label_texts = lt_label_texts
                column_texts = lt_column_texts
                group_header = lv_group_header
                window_title = lv_window_title
                table_header = lv_table_header
                col_count    = 2
                row_count    = 20
                table_multi_select = abap_false ).
I get the correct value in the select-option with the following code
    WHEN if_wd_ovs=>co_phase_3.
*   apply result
      IF i_ovs_data-m_ovs_callback_object->selection IS NOT BOUND.
******** TODO exception handling
      ENDIF.
      ASSIGN i_ovs_data-m_ovs_callback_object->selection->* TO <ls_selection>.
      IF <ls_selection> IS ASSIGNED.
          i_ovs_data-m_ovs_callback_object->context_element->set_attribute(
                                 name = i_ovs_data-m_ovs_callback_object->context_attribute
                                 value = <ls_selection>-kostl ).
      ENDIF.
I tried to use table_multi_select = abap_true, but then I have no idea how the code for     <b>WHEN if_wd_ovs=>co_phase_3.</b> must look like.
If anyone know the answer,give me the solution.
thanks in advance,
Marcus

Hi Marcus,
You can find a copy&paste example in WDR_TEST_SELECT_OPTIONS in the method ON_OVS of the view MAIN_VIEW.
There you can find for SCARR in called method do_ovs_scarr:
method do_ovs_scarr.
data:
    lt_scarr type cl_wd_flight_model=>tt_scarr,
    scarr    type scarr.
field-symbols:
    <lt_ovs_result>     type cl_wd_flight_model=>tt_scarr,
    <scarr>             like line of <lt_ovs_result>,
    <lt_sel_opt_result> type standard table.
case i_ovs_data-m_ovs_callback_object->phase_indicator.
    when if_wd_ovs=>co_phase_0.
      i_ovs_data-m_ovs_callback_object->set_configuration( TABLE_MULTI_SELECT = abap_true ).
    when if_wd_ovs=>co_phase_1.
      i_ovs_data-m_ovs_callback_object->set_input_structure( input = scarr ).
    when if_wd_ovs=>co_phase_2.
      cl_wd_flight_model=>get_scarr( importing et_scarr = lt_scarr ).
      i_ovs_data-m_ovs_callback_object->set_output_table( output = lt_scarr ).
    when if_wd_ovs=>co_phase_3.
      assign i_ovs_data-m_ovs_callback_object->selection->* to <lt_ovs_result>.
      assign i_ovs_data-mt_selected_values->* to <lt_sel_opt_result>.
      loop at <lt_ovs_result> assigning <scarr>.
        insert <scarr>-carrid into table <lt_sel_opt_result>.
      endloop.
endcase.
endmethod.
Best regards,
Thomas

OVS Value Check

Hi,
I have implemented a F4-Help with OVS for a slecet-option with spezial values in e.g. (1,3,5,7). But if the user don't use the F4 he can write also 2 in the select-option.
Is there a possibility to use a value check automaticly with the values from the F4 help.
Best regards
Marcus

Hi,
you could add a value set to the context attribute,
which will throw error when filling something else
you can fill it like in this Web Dynpro ABAP
grtz,
Koen
[url=https://www.sdn.sap.com/irj/sdn/crphelp#posted]Wiki[/url]

Query Help with Parent, Child, Child's Child

Hi all,
Need some help with a query. I'm trying to create a stored procedure that is sort of like a Customer, Order, Order, Details. In my situation the tables are different but nevertheless, I want to grab all the fields from the Parent, Child,
and Childs' Child, where the Parent.ParentID = @Parameter. I tried this:
CREATE PROCEDURE [dbo].[spGetCompleteProjectXML]
@ProjectID int = 0
AS
SELECT *,
(SELECT *,
(SELECT *
FROM PageControls
WHERE (PageControls.ProjectPageID = ProjectPages.ProjectPageID))
FROM ProjectPages
WHERE (ProjectPages.ProjectID = @ProjectID))
FROM Projects
WHERE (ProjectID = @ProjectID)
FOR XML AUTO, ELEMENTS
RETURN 0
I think I'm close, but it was my best effort. Could someone help?
thanks in advance

Hi TPolo,
Regarding your description, are you looking for a sample like below?
CREATE TABLE customer(customerID INT, name VARCHAR(99))
INSERT INTO customer VALUES(1,'Eric')
INSERT INTO customer VALUES(2,'Nelson')
CREATE TABLE orders(orderID INT,customerID INT)
INSERT INTO orders VALUES(1,1);
INSERT INTO orders VALUES(2,1)
INSERT INTO orders VALUES(3,2)
INSERT INTO orders VALUES(4,2)
CREATE TABLE orderDetails(orderID INT,item VARCHAR(99))
INSERT INTO orderDetails VALUES(1,'APPLE1')
INSERT INTO orderDetails VALUES(1,'BANANA1')
INSERT INTO orderDetails VALUES(2,'APPLE2')
INSERT INTO orderDetails VALUES(2,'BANANA2')
INSERT INTO orderDetails VALUES(3,'APPLE3')
INSERT INTO orderDetails VALUES(3,'BANANA3')
INSERT INTO orderDetails VALUES(4,'APPLE4')
INSERT INTO orderDetails VALUES(4,'BANANA5')
SELECT customer.customerID,customer.name,
(SELECT orderId,
SELECT item FROM orderDetails WHERE orderID=orders.orderID FOR XML AUTO,TYPE,ELEMENTS
FROM orders Where customerID=customer.customerID FOR XML AUTO,TYPE,ELEMENTS)
FROM customer WHERE customerID=1
FOR XML AUTO,ELEMENTS
DROP TABLE customer,orderDetails,orders
If you have any feedback on our support, please click
here.
Eric Zhang
TechNet Community Support

OVS Value help with a preallocate value

Similar Messages

Maybe you are looking for