Help with booleans and Buttons

Hi,
while ( repeat ) {
    tempValue = compMove.getRandomNumber();
    if ( nought.getUsedSquare(tempValue) ) {
        repeat = true;
    else if ( crosses.getUsedSquare(tempValue) ) {
        repeat = true;
    else {
        playButton[tempValue].setLabel("O");
        playButton[tempValue].setEnabled(false);
        nought.setSquareUsed(tempValue);
        repeat = false;
}getUsedSquare(tempValue) - Should return true if button is used
This code gets a random number in the range 0 to 8, and then uses this random number to check if a button has already been clicked and had its label changed using the getSquareUsed method. If the button has not been clicked then the label should be changed. Basically it is a Tic-Tac-Toe game.
The problem is that sometimes the code will change the label on a button that has already been clicked.
Why is this?
Thanks for any help you can give.

Alright:
if ( event.getSource() == playButton[0] ) {
    playButton[0].setLabel("X");
    crosses.setSquareUsed(0);
    if ( crosses.checkForWin() )
        System.out.println("Crosses Win!");
    while ( repeat ) {
        tempValue = compMove.getRandomNumber();
        if ( nought.getUsedSquare(tempValue) )
            repeat = true;
        else if ( crosses.getUsedSquare(tempValue) )
            repeat = true;
        else {
            playButton[tempValue].setLabel("O");
            playButton[tempValue].setEnabled(false);
            nought.setSquareUsed(tempValue);
            repeat = false;
    repeat = true;
    if ( nought.checkForWin() )
        System.out.println("Noughts Win!");
    playButton[0].setEnabled(false);
}That is the code i have for when the human player clicks on a button, the computer will make a random move, nothing intelligent about it (bit like me).
I changed my coding for the getSquareUsed method to:
public boolean getUsedSquare( int a ) {
   return squareUsed[a];
}I know that the button is set as being used in the setSquareUsed method, but still the computer player will overwrite an already used square.
Any ideas from this, or should i start again with something different?

Similar Messages

Help with images and buttons

I was wondering if anyone could recommend a tutorial or point me in the right direction. I've been trying to figure out how to use buttons to add images (been using png from photoshop with alphachannel) to a canvas. I don't have any problems skinning the buttons nor putting in a single image, nor text. As far as getting the images to layer when the buttons are clicked then I'm pretty lost. Not sure if an array is best or if adding and removing them as children in another container would be any easier..

I've been using flash builder beta 2. I was planning on embedding the images. I'm not sure if the help files and examples I am reading are not compatible or if I just have the syntax wrong. I haven't been able to find any examples that use embedded images and toggle visibility. I've used spark components. In design mode it puts the code in for a button when drag-dropped, then recommends using spark component instead. It seems that the only time that the images really do anything is when there's a spark component.
I've never used flex before would it be easier to use wordpad and try compiling it with something other than flash builder?

Working with XML and Button

Hi,
How are all of you. Well I am new to Flex. But I have started
building simple applications. One of the top most problem I am
facing is working with XML and Button. Can you please assist me in
this. I am explaining my problem:
I have an external XML file like this:
<Menu>
<button>
<idnt>0</idnt>
<label>General Health</label>
<text>General Health pages is currently under
construction</text>
</button>
<button>
<idnt>1</idnt>
<label>Mental Health</label>
<text>Mental Health pages is currently under
construction</text>
</button>
</Menu>
Now I want to generate Buttons Dynamically from this XML. And
the second thing which is the most problematic is that how I code
it so that when I press the Button labled "General Health", it will
show the same text as in the XML tag coresponding to tag
"<label>General Health</label>" ?
I badly need this. I am realy confused on this. Kindly help
me.
Regards
..::DeX

Let's assume that variable "node" contains one element of the
XML. For example,
<button>
<idnt>0</idnt>
<label>General Health</label>
<text>General Health pages is currently under
construction</text>
</button>
such that node.label would be "General Health", node.idnt
would be 0, etc.
You can build a Button like this:
var b:Button = new Button();
b.label = node.label;
b.data = node; // more on this later
b.width = 60;
b.height = 26;
addChild(b); // critical - adds the button to the display
list so you can see it
b.addEventHandler( MouseEvent.CLICK, handleClick );
You must set the button's width and height unless the button
will be in a container that will size its own children (like Tile).
Every Flex component has a data property. You can set it to
whatever you like. For your needs it makes sense to set each
Button's data property to the node it relates to.
Now suppose that code above is in a function, createButton:
private function createButton( node:XML ) : void {
// code from above
Here's how to make all the buttons where "menu" is a variable
that contains your XML:
for(var k:int=0; k < menu.button; k++) { // menu.button is
an XMLList
createButton( menu.button[k] );
Now to handle the event:
private function handleEvent( event:MouseEvent ) : void
var b:Button = event.currentTarget as Button;
trace( b.data.text);
When a button is picked, the description element will print
in the debug console. Replace the trace with whatever code you
need.

Need help with Flash CS4 buttons/can't get buttons to control anything

Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.

Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
>

Full text Search Issue with Boolean AND Search in 2012 server

We are trying to use CONTAINSTABLE function with BOOLEAN AND search, but unable to get expected results in sql server 2012.
If use BOOLEAN OR search we get expected results.
Full text indexed table is having more than 10 millions of records. we checked index fragmentation level is 82%. then we done Rebuild. Even after rebuild, unable to fetch expected results with AND SEARCH.
The below query is used
SELECT ft.* FROM FT_ROWS ft
INNER JOIN CONTAINSTABLE(FT_ROWS, summary,
' "manifest" AND "version" ') AS key_tbl
ON ft.log_id = key_tbl.[key]
if we remove ( "manifest" AND ) from the search string, then getting some results but AND search is not returning expected results.
Please help any suggestion
kkprasad

The explanation that is closest at hand is that you have no documents with both of these words in them.
An alternate explanation is that you have accidently entered "manitest" into your stoplist.
Erland Sommarskog, SQL Server MVP, [email protected]

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Create Window with Textbox and Button For getting Input Value

Hi All,
I have create plugin application but i want to take input from user. Therefore i want to create window with textbox and button.
please may i get solution...

Or if that's all you need to do, just use JavaScript or a form.

Help with count and sum query

Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH    got_group_by_columns     AS
     SELECT a.empl_id
     ,     CASE
                    WHEN c.category = 'E'
              THEN 'Headcount Exempt'
                    ELSE 'Headcount Non-Exempt'
            END          AS accounts
     ,      CASE
                    WHEN a.company = 'ZEE'
                    THEN 'OH'
                    ELSE 'NA'
            END          AS market
     FROM              essbase.employee_pubinfo a
     LEFT OUTER JOIN mms_dist_copy             b ON   a.cost_ctr     = TRIM (b.bu)
     INNER JOIN       mms_gl_pay_groups        c ON   a.pay_group      = c.group_code
     WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
     AND        fiscal_year           = '2012'
     AND        fiscal_month          = 'MARCH'
SELECT    'ST'               AS ledger
,       accounts
,       market
,       'MARCH_12'          AS period
,       COUNT (empl_id)      AS head_count
FROM       got_group_by_columns
GROUP BY accounts
,            market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Ipod touch help with missing accept button for terms and conditions

I want to update my apps but when I try it tells me that i first have to accept the new terms and conditions, however, there is no accept button to click.
I have tried the other option to have it sent by e-mail but when I open the e-mail it's still the same with no accept button.
I went into settings and allowed cookies on safari.
I have an ipod touch 4th gen with ios 6.1.3. I am also not able to buy any apps, music , etc.
Someone PLEASE help!!!!

Under Safari settings I have also "cleared history" and "cleared cookies and data"
I have also given the i-pod both a restart, and a hard restart (holding the power and home buttons until the apple appears)
"private browsing" is set to off. "block pop-ups" is off too.

Reset while loop with time and button?

I am trying to get the while loop to stop and reset with a button or if time runs out. So when I switch the button it should stop the indicator; when I switch the button back on it should reset the time and start reading data again. Likewise, when time runs out it should stop the indicator and I want to flip the switch to start a new run and reset the time again. I have attached my vi for some clearification. If you have trouble understanding please let me know and Ill try and explain more. Thanks.
Attachments:
reseting_time_whlloop.vi ‏70 KB

Relient wrote:
I know my program is not efficient at all, Im inexperienced with labview and my company needs it soon so I'm trying to get it out quick. Attached is what I have so far. It is very messy!! However it is nearly working how we want. The producer/ consumer design is needed because I am implementing this into my other program and each loop has a different job than the other loops. This is just a mock version as I am trying to figure out the process.
The stop buttons aren't needed but the button labeled boolean should reset the time and stop the run. When the run is stopped I want to re-enter a 'test time' and hit the button again for a new run. I just need to be able to reset the original time... Is the producer/consumer the best way to connect while loops because it seems messy?
Again sorry if it is hard to follow and if its not the best way to go about it; I'm doing the best with what I know. Thanks for the help.
I realize you may need this soon but you will regret it later (or the next person to touch this code) when you need to touch it again. It is overly comnplicated, messy and not very well designed. Doing a bad job quickly is never the right answer. A little extra time spent up front to do it right can save tons more time later on.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Help with HTML and JAVA

Hi.
I'll have this question, and can't find the right answer...
Suppose is this site called xyz.com and you need to register to be a member
For simplicity member log-in page is simple...contains only login and password fields(Submit too) in HTML code:
<html>
<body>
<form name="input" action="html_form_action.asp" method="get">
User ID: <input type="text" name="ID" /><br />
Password: <input type="password" name="pwd" /><br />
<input type="submit" value="Submit" />
</form>
</body>
</html>Will I be able to build a Java application witch will:
1-Send me to this web-page
2-Place my chosen id and password in the right place
3-"Press" Submit button.
So I open this Java Swing application , and Go button will send me to the members page of my xyz.com page.
Thank you for the help.

altisw5 wrote:
Go button will send me to the members page of my xyz.com page.It depends on what you mean by "send me".
If you mean access data on the members page through your program, yes.
If you mean open a browser window to that page, I guess doable but might be tricky (with Robot and stuff).
If you mean physically send you on the internet, no.

Help With Scrolling Menu / Button Rollovers

First thank you to anyone who can answer and help with this
question.
http://paragon.sortismarketing.com
- at this link I have created a site with a simple scrolling menu.
Now what I want to happen is when you rollOver the buttons on the
scrolling menu they get larger and then smaller again after you
roll off them.
I know how to do this with tweening in a non moving
environment, by making them a movie clip instead of button. But for
some reason when I did this in this case it screwed the menu all up
and made it go crazy. Is there a way to do this with action script
that isn't going to screw up the underlying code for the
scrolling?

You can use the below code also. As your mouse pointer goes
over the down, it will scroll down.
on(rollOver){
scrolltext.scroll -= 1;

Help with Find / Replace button title tag contents (text)

Hi there,
I designed my site with Sitegrinder (Medialab) –
Currently all the title tags generated for buttons are the same as
the actual html page name.
The problem with this is that the tooltip which appears in
browsers when you hover over the button with the mouse gives you
the page name. Instead I want to use these tooltips to give the
user an indication of what the function of the button is.
An example: A zoom button above an image: Currenty the
tootlip says “zoom imagename pagename” – Instead
it should say “click here to zoom”.
I need help to get the Dreamweaver Find and Replace tool to
batch replace these tags for me for about a 100 pages.
Here is an example of the code:
<body>
<div id="id1zoomimpastooilweddingbutton"><a
href="zoomimpastooilwedding.html"
title="zoomimpastooilwedding"></a></div>
I only want to replace the text in the title tag - Since the
text “zoom” appears several times in the body, I
can’t get the Find tool to pick up and Replace the occurrence
of “zoom” in the title only…….
Options I’ve tried:
Search Current document: Search for: “specific
tag”: “title”, “containing”:
“text” = zoom (I’ve tried this with
“zoomimpastooilwedding” and zoom[^”]* with no
results
I’ve also tried: Search for: “specific
tag”: “body”, “containing”:
“specific tag” “title”
“containing”: “text” = zoom
etc……………..
I need help with what parameters to enter in order to find
and replace all the text within the title tag with my own text
Thanks very much!
Anton

You have ~ 100 pages, each of which has images with title
attributes (not
tags), all of which BEGIN with the letters "zoom"?
What do you want to replace that text with? Wouldn't it be
different for
each button? Or do you mean that you would do multiple
sitewide searches,
one for each button? This illustrates how wrong it is to not
use DW
Templates or server-side includes to simplify the management
of your
navigation elements....
Did you ask Medialabs if it would be possible to specify this
before
generating the HTML?
How did you like working with SiteGrinder? It looks like a
nice product to
me, although I'm not fond of the final results code-wise....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"unison123" <[email protected]> wrote in
message
news:[email protected]...
> Hi there,
>
> I designed my site with Sitegrinder (Medialab) ?
Currently all the title
> tags
> generated for buttons are the same as the actual html
page name.
>
> The problem with this is that the tooltip which appears
in browsers when
> you
> hover over the button with the mouse gives you the page
name. Instead I
> want to
> use these tooltips to give the user an indication of
what the function of
> the
> button is.
>
> An example: A zoom button above an image: Currenty the
tootlip says ?zoom
> imagename pagename? ? Instead it should say ?click here
to zoom?.
>
> I need help to get the Dreamweaver Find and Replace tool
to batch replace
> these tags for me for about a 100 pages.
>
> Here is an example of the code:
>
> <body>
> <div id="id1zoomimpastooilweddingbutton"><a
> href="zoomimpastooilwedding.html"
> title="zoomimpastooilwedding"></a></div>
>
> I only want to replace the text in the title tag - Since
the text ?zoom?
> appears several times in the body, I can?t get the Find
tool to pick up
> and
> Replace the occurrence of ?zoom? in the title only??.
>
> Options I?ve tried:
>
> Search Current document: Search for: ?specific tag?:
?title?,
> ?containing?:
> ?text? = zoom (I?ve tried this with
?zoomimpastooilwedding? and zoom[^?]*
> with
> no results
>
> I?ve also tried: Search for: ?specific tag?: ?body?,
?containing?:
> ?specific
> tag? ?title? ?containing?: ?text? = zoom etc?????..
>
> I need help with what parameters to enter in order to
find and replace all
> the
> text within the title tag with my own text
>
> Thanks very much!
>
> Anton
>
>

Help with booleans and Buttons

Similar Messages

Maybe you are looking for