HELP with Call Logging and Email Recording!!

My 8830 is
1) not keeping my calls logged even though I have set it to log all calls and
2) erasing my record of emails older than one week, even though I have set it to keep all my emails and messages for 5 months.
HELP!!
Kabir

You're facing memory constraints in your device. Perform the following steps -
Give a soft reset by removing the battery for 30sec.
Check how much memory is free in your device to Options -> Status -> Free Memory. To view all the database size go to Option -> Status -> click Menu button then select Database Sizes
Delete less frequently used application. To delete go to Options -> Advanced Options -> Applications -> highlight the application you want to delete -> click Menu and select Delete
If you stored your picture in device memory them move them to your media card
Check the below Knowledge Bases -
Call and SMS logs disappear when BlackBerry smartphone is low on memory
Email messages are deleted from the BlackBerry device
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

Problem with call log and email signature...

Hi, I have 2 little problem with my BB
First, the day won't appear in the call logs. It only displays the month like 08/dd.
Pic 1
Second, when I send emails, my signature gets all mixed up because of my french punctuation, any idea why ?
Pic 2
Message Edited by Jerg on 08-09-2009 11:29 AM
Message Edited by Jerg on 08-09-2009 11:31 AM

Wow, that's REALLY low. That number means there's only 6MB free. It's recommended to have AT LEAST 15MB free. Check under Options | Status, hit the menu button, then choose Database Sizes. What number is listed for Total Size at the top?
If the Content Store is really big then that means all of the media files (pictures, videos, etc) are being saved in the device memory rather than on a media card. Does your boss have a media card to store the media on?
Did you also change the Keep Appointments setting to something lower like you did with the Keep Messages setting?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Need help with our "log and transfer" workflow...

All,
Again, it's our first tapeless project so please keep having patience with us.
What should the workflow be for our project?
I bring in the Firestore and dump raw files to a hard drive. Should I then transfer all footage to QT files? OR should my editor start looking at footage and carving it up as he transfers those files to QT?
Our issue is that we have a lot of footage coming in and the new tower is slow when transferring footage from raw files to QT. It's driving us crazy.
Aside from buying a more powerful tower, is there a way for us to review and log the footage and transfer at a real time pace (for example, is there a way to log the footage and do a transfer to QT files at the end of session?).
Thanks.

David, thanks for the questions.
Yes, it's FS-100. And yes, we are shooting on a HVX200.
The settings we were given by our editing guru create MXF files rather than QT. If so, we should dump onto a hard drive and then bring into FCP, correct?
Is there a way to log a number of clips and then transfer them en masse? Or do I have log and transfer them one at a time?
Our issue is that the computer grinds to a virtual halt while transferring.
Thanks again. We look forward to your thoughts.

Help with calling perimeter and area

how do i get this program to call perimeter and area in main
public class Rectangle{
public static void main (String[]args){
Rectangle1 rectangle = new Rectangle1();
rectangle.setColor ("white");
rectangle.setHeight(1);
rectangle.setWidth(1);
System.out.println(rectangle.toString());
     class Rectangle1 {
     private String color = "red";
     private double height = 40;
     private double width = 4;
     private double area;
     private double perimeter;
Rectangle1 () {
     public double getHeight(){
     return height;
     public void setHeight(double height) {
     this.height = height;
     public double getWidth(){
     return width;
     public void setWidth(double width){
     this.width = width;
     public String getColor(){
     return color;
     public void setColor(String color){
     this.color = color;
     //area and perimeter
double getArea(){
return height * width;
double getPerimeter(){
return height* 2 + width* 2;
public String toString(){
return("the area is " + area + "\n" + "the perimeter is " + perimeter + "\n"
+ "color is " + color);
     }

     public class Rectangle{
public static void main (String[]args){
Rectangle1 rectangle = new Rectangle1();
rectangle.setColor ("white");
rectangle.setHeight(1);
rectangle.setWidth(1);
System.out.println(rectangle.toString());
rectangle.setArea();
rectangle.setPerimeter();
//area and perimeter
double getArea(){
return height * width;
public void setArea(double area){
this.area = area;
double getPerimeter(){
return height* 2 + width* 2;
public void setPerimeter(double perimeter){
this.perimeter = perimeter;
}this is what i did still coming up with zero

Need help with my contacts and email - used to have ipod touch

Hi all
I had an ipod touch in the past that I used to sync through the laptop i'm on now. However, I sold that quite some time ago and just got a new iphone the other day. when I hooked it up to my laptop to set up, my old touch account came up. This normally wouldn't be a problem but now it's syncing all my OLD contacts (thousands of them) and old email accounts...some of which are not in my windows live mail anymore.
How do I go about:
1) getting rid of all these contacts that were just loaded onto the phone
2) starting new to add only the contacts I have in my windows live contacts list?
I've tried deauthorizing the computer but that didn't do anything other than delete old apps I had on the touch.
Much appreciated!

Were you provided an option to transfer the backup from your Touch to your iPhone that you accepted?
Which supported application on your computer are you syncing contact info with?
With Vista, this can be with Outlook 2003 or 2007, or with the address book used by Windows Mail with Vista - which is the name change for Outlook Express with Vista. The address book is called Windows Contacts I believe and the sync option for contact info is selected under the Info tab for your iPhone sync preferences.

Need help with account sharing and email

I'm an inexperienced Mac user with a G5, dual 2.0 processors and 1.5 meg ram. Just installed iLife 05 and having an iPhoto problem. My spouse and I have separate user accounts on the same pc. We'd like to share our photos with one another (they're actually the same photo's). On my account, iPhoto email is "mail", no problem. On hers it displays Entourage. I can't change it from preferences pane. Greyed out. On my account it shows America on line but the email icon is "mail" Can you help. We both want "mail"
What is the proper way to share this account? Do we check preferences and share or do we go to the User accounts and move the photo library? Please provide a basic explanation to one who is not really familiar with the workings of a Mac. That's why I went to a Mac in the first place. It just generally works.
Thanks in advance.
Al

The iPhoto sharing that was in the previous version doesn't seem to exist. There is now iCloud Photo Sharing.
http://support.apple.com/kb/HT5902
I don't know about the file sharing issue.

Need Help with Scheduling, Saving, and Emailing a Report From Apex

My ultimate goal is to schedule a report to be created in apex, save it to the database (in pdf), and then email it.
I can schedule the proc which underlies the report. I can send an email from the databse. But I don;t know how to do all three of these in an automated fashion via apex. Any help would be greatly appreciated.

Good afternoon,
I run this type of process in a complete Windows environment - the client was Windows XP and the Database & Application Server were both Windows Server 2003.
Typically, I would build a .BAT file within a Page Procedure that included a line to run the report, saving to a .PDF file and then generate a sql statement that would send an email to the user. In your case, you would want to email the .PDF as an attachment. My email was a notification that the report was ready for them to download and they would access their FTP folder.
You can then schedule the .BAT file to run using the Oracle Scheduler to have that process run as an executable. The scheduler allows you set the date/time the process should run. To do this, your user must have CREATE JOB and CREATE EXTERNAL JOB privileges to run external jobs. (see the Oracle DB Admin manual for further details).
Good luck,
Don.
You can reward this reply by marking it as either Helpful or Correct :)

Help with multiple accounts and email sharing

I am trying to setup a computer for a non-profit and all users need to have access to the same Entourage email account. Is there a way to set this up so each user still has their own OS X account but access the same Entourage email account?
Message was edited by: widowmaker

1. Is it possible to maintain more than one account on a single iPad?
Not at the same time.

Emails, Call Logs and BlackBerry Messenger messages deleted

Almost exactly 2 years from the date I got my BlackBerry Curve 8300, my emails, call logs and BlackBerry Messenger messages keeps getting deleted without notice. The BlackBerry then stalls until I remove the battery and I log on again. Can anyone help me idetify the problem and how I can resolve this?
Solved!
Go to Solution.

HI and Welcome to the Forums!
Wow -- 2 years without an issue on a computing device! A record! Excellent! Here are some KB's that might be helpful:
KB14213 Call logs, SMS text messages, and email messages are deleted on the BlackBerry smartphone
KB14320 How to maximize free space and battery power on the BlackBerry smartphone
KB15345 How to qualify low memory situations on the BlackBerry smartphone
http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...
http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...
Hopefully something there will be useful.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What's the phone number I should call for help with my iPhone and ihome dock?

What's the phone number I should call for help with my iPhone and ihome dock?

http://www.ihomeaudio.com/support/

Hi im having problems with my internet and email ive reset the network even with my wifi on ive also turned off and on airplane mode help please thank you

hi im having problems with my internet and email Ive reset the network even with my WiFi on Ive also turned off and on airplane mode help please thank you

hi Ive reset my network toggled the airplane on and off and turned off my carrier off then turned my phone off and turned my carrier back on but still problem persists

IPhone 5 vibrates with incoming call, message, and email but there is no ring tones.

Recently had to replace my IPhone. Repaced the SIM card and backed up on ITunes. Everything works fine but I get no ring or sounds when receiving calls, messages, and emails, etc. Phone does vibrate. Speaker is working with music. Volume is turned on in settings.

Check the mute switch near the external volume controls. If orange is showing it is muted.

My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Losing call logs and message logs unexpectinly.

Well to start off I've gone through numerous types of phones. I finally got the curve and haven't had any major problems until now. Last nite I got done looking on myspace and went to check my text messages and all except my emails were gone. Then I checked my call log and all the numbers were wiped out. I went to bed thinking it was a one time thing. However this morning it did it again and I don't even know if my weather alerts were delivered or not. My memory card shows I still have 1.7 space to use out of the 2.0. I'm wondering if it couldn't be my myspace since I just added it two nites ago. If anyone could help I would greatly appreciate it. I don't know where else to turn for help and I'm not that advanced with this kind of things. Thank you in advance.

Check out the memory threads. It sounds like you are maxed out on device memory. There are several threads on this subject. I hope this points you in the right direction.

Call logs and texts deleting

Hi all I have been having some problems with my blackberry as well keeps deleting all call logs and sms from my phone and I have no idea why also email is having the same problems this has just started a couple of days ago any idea's any help with be very much appreciated many thanks

Low memory on your device... very common if you don't a little maintenance on the memory now and then.
First thing? Check the File Free at Options > Status, what is the number at File Free? Now, remove the battery of your device, hold a minute, replace and reboot. What is the File Free now?
Read this: http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...
And this: http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...
Additional links to read:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15345&sliceId=SAL_Pub...
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB14320&sliceId=SAL_Pub...
http://www.blackberry.com/btsc/dynamickc.do?externalId=KB14213&sliceId=SAL_Public&command=show&forwa...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HELP with Call Logging and Email Recording!!

Similar Messages

Maybe you are looking for