Unable to lookup the ServerLifeCycleRunTimemBean exception when try to start managed server
I have two domains, FRDomain and NewServer2. I can startup all servers on FRDomain, including newly created non-default servers. For xyzDomain, I can start up the admin server, but none of my other managed servers. When I try, I get
weblogic.management.scripting.ScriptException: Error occured while performing start : Unable to lookup the ServerLifeCycleRuntimeMBean for server NewServer2
Syntax:
nmConnect(.....)
nmStart('AdminServer')
connect(...)
start ('NewServer2','Server')
FYI: This is WIndows 2008 Server
Hi, the topology of th network ist the next:
ISP (DATACENTER) -> SRV1 (phisical) + SRV2 &SRV3 (virtual)
Every one of them have 2 NIC ( for server 2 and 3 - virtual too)
NIC1 - operates on private level - 192.168.1.1 dns, gate,dc (srv1)
NIC2 - real ip address, gate - gateway of ISP dns - 192.168.1.1
When set up NIC1 - everything is ok .
NIC2 - action is : set ip and mask - enable without gate - then it is in unidentified status and go in public state.
disable nic2, set up gateway - and dns - 192.168.1.1 and again enable - everything is ok
But after restart - nic2 - goes again in Domainauthenticated mode. :(
Additional:
On srv2 - i put RRAs role and smthing stange is that after enable rras service - all ports are shutted and machine pretendet to be invisible.
Similar Messages
-
Security exception when trying to start Managed Server
Hi all,
First I configured a Adminisistration server and started it. After that I added
a another server as ManagedServer.These two points to the same Weblogic server.
When I try to start Managed server by running the script, it gave me following
error.
<Jun 25, 2001 5:25:11 PM GMT+06:00> <Emergency> <Server> <Unable to initialize
the server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: java.security.acl.NotOwnerException
java.lang.IllegalAccessError: java.security.acl.NotOwnerException
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:36)
at weblogic.security.acl.Realm.authenticate(Realm.java:183)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:116)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushUser(WLInitialContextFactoryDelegate.java:444)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:287)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:259)
at weblogic.jndi.Environment.getContext(Environment.java:135)
at weblogic.jndi.Environment.getInitialContext(Environment.java:118)
at weblogic.management.Admin.initializeRemoteAdminHome(Admin.java:891)
at weblogic.management.Admin.start(Admin.java:305)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:331)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
I suspect reason for this might be weblogic.policy file. There you need to edit
some lines replacing the location of the directory in which you installed WebLogic
Server. I did this but still error occurs.
Do u have any idea why above error occurs and if it is due to the weblogic.policy
file entry please tell me how it correctly done.
I am using WL60(sp2)in Win NT,
My installed dir: E:\bea\wlserver6.0\
Thanks
NalikaI don't believe that you can use the same server definitions for both an admin server and a managed server. So, you'll need to create a second server that is your managed server with a different name or
just run with the admin server.
Paul
On 25 Jun 2001 04:43:22 -0800, "Nalika" <[email protected]> wrote:
>
Hi all,
First I configured a Adminisistration server and started it. After that I added
a another server as ManagedServer.These two points to the same Weblogic server.
When I try to start Managed server by running the script, it gave me following
error.
<Jun 25, 2001 5:25:11 PM GMT+06:00> <Emergency> <Server> <Unable to initialize
the server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: java.security.acl.NotOwnerException
java.lang.IllegalAccessError: java.security.acl.NotOwnerException
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:36)
at weblogic.security.acl.Realm.authenticate(Realm.java:183)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:116)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushUser(WLInitialContextFactoryDelegate.java:444)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:287)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:259)
at weblogic.jndi.Environment.getContext(Environment.java:135)
at weblogic.jndi.Environment.getInitialContext(Environment.java:118)
at weblogic.management.Admin.initializeRemoteAdminHome(Admin.java:891)
at weblogic.management.Admin.start(Admin.java:305)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:331)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
I suspect reason for this might be weblogic.policy file. There you need to edit
some lines replacing the location of the directory in which you installed WebLogic
Server. I did this but still error occurs.
Do u have any idea why above error occurs and if it is due to the weblogic.policy
file entry please tell me how it correctly done.
I am using WL60(sp2)in Win NT,
My installed dir: E:\bea\wlserver6.0\
Thanks
Nalika -
Error when trying to start managed server from node manager
I have a managed server which is authenticated through a WeblogicAuthenticProvider. When starting the managed server from command line I need to setup certain jars in the classpath in order to start it successfully. However when I try and start the managed server from a node manager, I receive the following error.
Any ideas as to what is going on are appreciated. Is there any way to force Weblogic Node manager to invoke the actual startManagedWeblogic.cmd when bringing up the managed server
Thanks
<Jun 5, 2006 9:21:05 AM EDT> <Info> <NodeManager@*.*:5555> <Starting Server TweCluster::TaxwareServer1 ...>
<Jun 5, 2006 9:21:07 AM EDT> <Info> <NodeManager@*.*:5555> <Server TweCluster::TaxwareServer1 started, process id = 3,012>
<Jun 5, 2006 9:21:11 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120-20041118-1131-win-ia32 from BEA Systems, Inc.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://zeus3dev:7001 to check if there exists a running admin server at this URL.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://zeus3dev:7001 to retrieve the initial configuration.>
<Jun 5, 2006 9:21:16 AM EDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\bea8.1\weblogic81\common\nodemanager\TaxwareServer1\TaxwareServer1.log is opened. All server side log events will be written to this file.>
The WebLogic Server did not start up properly.
java.lang.NoClassDefFoundError: com/taxware/twe/util/crypto/CryptoUtil
at com.taxware.twe.auth.server.GenericPrincipalValidator.<init>()V(GenericPrincipalValidator.java:41)
at com.taxware.twe.auth.server.WeblogicPrincipalValidator.<init>()V(WeblogicPrincipalValidator.java:38)
at com.taxware.twe.auth.server.WeblogicAuthenticationProvider.getPrincipalValidator()Lweblogic.security.spi.PrincipalValidator;(WeblogicAuthenticationProvider.java:188)
at weblogic.security.service.PrincipalAuthenticator.initialize(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:154)
at weblogic.security.service.PrincipalAuthenticator.<init>(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:262)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(Ljava.lang.String;Lweblogic.management.security.RealmMBean;)Lweblogic.security.service.PrincipalAuthenticator;(SecurityServiceManagerDelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(Lweblogic.management.security.RealmMBean;Ljava.util.HashMap;)V(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(Ljava.lang.String;)V(SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms()V(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere()V(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize()V(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String;)I(T3Srvr.java:344)
at weblogic.Server.main([Ljava.lang.String;)V(Server.java:32)
Reason: com/taxware/twe/util/crypto/CryptoUtilFound a workaround:
Manually, add PATH (and probably the other environment variables also) to
${WLS_HOME}/common/bin/commEnv.sh. -
Fatal initialization exception occurs when starting Managed Server
Hi all,
First I configured a Adminisistration server and started it. After that I added
a another server as ManagedServer.These two points to the same Weblogic server.
When I try to start Managed server by running the script, it gave me following
error. _______________________________
<Jun 25, 2001 5:25:11 PM GMT+06:00> <Emergency> <Server> <Unable to initialize
the server: 'Fatal initialization exception Throwable: java.lang.IllegalAccessError:
java.security.acl.NotOwnerException java.lang.IllegalAccessError: java.security.acl.NotOwnerException
at weblogic.security.acl.Realm.getRealm(Realm.java:91) at weblogic.security.acl.Realm.getRealm(Realm.java:36)
at weblogic.security.acl.Realm.authenticate(Realm.java:183) at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:116) at
weblogic.jndi.WLInitialContextFactoryDelegate.pushUser(WLInitialContextFactoryDelegate.java:444)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:287)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:259)
at weblogic.jndi.Environment.getContext(Environment.java:135) at weblogic.jndi.Environment.getInitialContext(Environment.java:118)
at weblogic.management.Admin.initializeRemoteAdminHome(Admin.java:891) at weblogic.management.Admin.start(Admin.java:305)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:331) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35) ______________________________________________
I suspect reason for this might be weblogic.policy file. There you need to edit
some lines replacing the location of the directory in which you installed WebLogic
Server. I did this but still error occurs.
Do u have any idea why above error occurs and if it is due to the weblogic.policy
file entry please tell me how it correctly done.
I am using WL60(sp2)in Win NT,
My installed dir: E:\bea\wlserver6.0\
Thanks NalikaHi
(It was me and Berit that sent the original question).
After some experimentation we saw that the managed server did get
some configuration from the admin server, so the problem was in
there somewhere.
I had added an (empty) cluster and machine to the admin server, just
to test adding. When I removed them everything worked fine afterward.
So it was some kind of configuration error from our side, but we never
did find out what it was.
I guess the lesson is to only define things when you really need them :-)
Regards
Mikael
Timothy Fry wrote:
We're getting the same problem, but on Solaris 2.7.
Did you get a solution from bea yet?
Tim
"Berit Bylund" <[email protected]> wrote in message
news:[email protected]..
Hello
We are trying to start a managed server (under the examples
domain, NT 4.0, WLS 6.0 Beta 2)
We start the managed server with the parameter
-Dweblogic.management.server=http://127.0.0.1:7001 -
When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)
Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences. -
When opening Bridge I get this message: Bridge encountered a problem and is unable to read the cash. Please try purging the central cache in the cache preferences to correct this problem. I did this and still get this same message.Also now when deleting images they don't delete till I close and reopen Bridge. What can i do to fix this problem?
Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences. -
Unable to lookup the Deploy Service. java.lang.ClassCastException in NWDS
Hi All,
I am getting the following exception while deploying an application in NWDS.
Please help me in resolving this issue
Sep 6, 2007 10:24:32 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : bala
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/BALU/LOCALS1/Temp/temp64339RFCFlightList.ear
Result
=> deployment aborted : file:/C:/DOCUME1/BALU/LOCALS1/Temp/temp64339RFCFlightList.ear
Aborted: development component 'RFCFlightList'/'local'/'LOKAL'/'0.2007.09.06.22.24.23'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: Unable to lookup the Deploy Service. java.lang.ClassCastException
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment exception : The deployment of at least one item abortedHi Bala
Some of the services at your server are not running..ask your system admin to restart the SDN server and try to deploy once
Regards
Chaitanya.A -
Hello,
my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
Thanks in advance!
Sincerely,
hoho33"
Can you restore that JSON backup in a new profile?
Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
A JSON backup starts with: {"title":"","id":1,"dateAdded"
A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
You can try if you can restore that JSON backup in a new profile.
Create a new profile as a test to check if your current profile is causing the problems
See Basic Troubleshooting: Make a new profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
firefox support won't to help me to solve my problem!
If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
like HP, Dell , etc. give remote desktop support to their users!
Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
Greetzz -
I have searched the internet and this forum and have not found an answer...
I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005. I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'. I attempt to run the following script:
exec sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
@filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
The error message I get back is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write. I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist! They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
What do I have to do to install the AdventureWorkds database????Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day -
My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation
And did you then actually purge the cache?
Please realize that you have given ZERO details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I have master suite cs6. on mac osx. bridge has been quitting unexpectedly. Also, getting message at start up that states that "bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I have purged the cache several times and adjusted settings with no change. I also downloaded the entire suite and installed. Do I need to uninstall all of the programs before installing the suite? There is not an option to install only Bridge from the install package.
Maria,
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you. -
Bridge Freez: "Bridge encountered a problem and is unable to read the cache. Please try purgin...'
I've had the same issue for years. I finally found a solution by resetting bridge to factory settings. Here's an article explaining how to fix the bridge cache issue.
http://easttexashomestead.com/2014/08/adobe-bridge-cache-error-fixed-with-factory-reset/
How to fix: "Bridge encountered a problem and is unable to read the cache. Please try purging..."
I hope this helps! -
Bridge encountered a problem and is unable to read the cache. Please try specifying a new cache location in Cache Preferences to correct the situation.
I have do this again and again and again but Bridge ask me to this each time a start up ??Maria,
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you. -
hiiii.....when i try to start SAP server its not geting start.....
may be problem related with dialog work process....
i attached DEV_W0 log file please help mi out
thanks
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun Feb 05 19:01:08 2012
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\A12\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\A12\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\A12\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 2172
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2172) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12784 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 034E0040, size: 1977824)
M DpShMCreate: allocated sys_adm at 034E0040
M DpShMCreate: allocated wp_adm at 034E0560
M DpShMCreate: allocated tm_adm_list at 034E3750
M DpShMCreate: allocated tm_adm at 034E3778
M DpShMCreate: allocated wp_ca_adm at 03680438
M DpShMCreate: allocated appc_ca_adm at 03684A88
M DpShMCreate: allocated comm_adm_list at 036861F8
M DpShMCreate: allocated comm_adm at 03686210
M DpShMCreate: allocated ca_info at 036B5010
M DpShMCreate: allocated wall_adm at 036B5018
X
X Sun Feb 05 19:01:09 2012
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=F:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPA12's password
C Connecting as /@A12 on connection 0 ...
C Attaching to DB Server A12 (con_hdl=0,svchp=075513DC,svrhp=07553644)
C
C Sun Feb 05 19:01:19 2012
C Starting user session (con_hdl=0,svchp=075513DC,srvhp=07553644,usrhp=0755BE24)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
C Try to connect with default password
C Connecting as SAPA12/<pwd>@A12 on connection 0 ...
C Starting user session (con_hdl=0,svchp=075513DC,srvhp=07553644,usrhp=0755BE24)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 957] [dbsh 0957 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server wagh_A12_00 on host wagh (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun Feb 05 19:01:19 2012
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2172) [dpnttool.c 346]hiii guys,
My problem still not solve..now paste DEV_disp log file...here show work process died...plz look that n give mi solution..
trc file: "dev_disp", trc level: 1, release: "620"
Wed Feb 08 17:06:12 2012
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
Wed Feb 08 17:06:13 2012
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 2412
***LOG Q00=> DpSapEnvInit, DPStart (00 2412) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Wed Feb 08 17:06:17 2012
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 11280 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 034E0040, size: 1976320)
DpShMCreate: allocated sys_adm at 034E0040
DpShMCreate: allocated wp_adm at 034E0560
DpShMCreate: allocated tm_adm_list at 034E3170
DpShMCreate: allocated tm_adm at 034E3198
DpShMCreate: allocated wp_ca_adm at 0367FE58
DpShMCreate: allocated appc_ca_adm at 036844A8
DpShMCreate: allocated comm_adm_list at 03685C18
DpShMCreate: allocated comm_adm at 03685C30
DpShMCreate: allocated ca_info at 036B4A30
DpShMCreate: allocated wall_adm at 036B4A38
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1207 MB
<ES> 1206 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( wagh) [dpxxdisp.c 9115]
Wed Feb 08 17:06:18 2012
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Wed Feb 08 17:06:58 2012
ERROR => W5 (pid 2712) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W9 (pid 2744) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W11 (pid 2760) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
my types changed after wp death/restart 0xbf --> 0xbb
Wed Feb 08 17:07:18 2012
ERROR => W0 (pid 2672) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 2680) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 2696) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 2704) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W7 (pid 2728) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 2736) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W10 (pid 2752) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W12 (pid 2768) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 2776) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbb --> 0xa1
Wed Feb 08 17:07:38 2012
ERROR => W2 (pid 2688) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W6 (pid 2720) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W14 (pid 2784) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
my types changed after wp death/restart 0xa1 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Wed Feb 08 17:07:45 2012
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 2412) [dpxxdisp.c 7883] -
I've gotten an Error 150:30 message when try to start Elements 8.0 and asked to contact Adobe support. Trying to do that led me here.
Can I get some help here?
Thanks,
HarryThen try the solutions here:
https://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
I know it says Creative Suite, but PSE is based on the same code so a lot of the same fixes work for both.
Maybe you are looking for
-
How to query the condition value in VPRS
Hello all, we provide the sales price to customers based on the condition value in "VPRS" ,because I have thousands of goods need the price,so I 'd like to make a query to extract the condition value in "VPRS". which table is refer to this? https://m
-
When Exported in PDF reports displays HTML Tags
Hi All, Business Object XI R2 WebI Report I am Reporting on Oracle CLOBs. This CLOB contains Data with HTML Tags, Clearly this CLOB is the combination of DATA formatted in HTML tags. When I create a WebI Reports on this (CLOB) WebI displays correctly
-
SRWC 2.0 descriptor file and SUNWuttsc-kio not present
Dear Forum users, I have installed Solaris 10 11/06 OS in my SFV240 server. Also have installed the following: 1) Latest Solaris 10 patch bundle 2) SRSS 4.0 update 2 BETA. 3) SRWC 2.0_15 I read through the SRWC Installation and Admin guide under Kios
-
Hi gurus, I have designed and configured SOAP to file scenario. I have used http://xyz namespace in design time. I have created two business systems for this sceanrio. I have downloaded and installed soap client on my system. When I open this soap cl
-
How to export a finished video to mac user.
The video is saved as an MP4 format on my Lenovo computer. My daughters uses a Mac. She can't view it. Help.... Billy