Help with compiling with Java 1.3 in Windows 98

Using JDK 1.3 and Windows 98... here is my problem. If I create a class called EventSite.java and another class called eventsite.java (same name, different cases) and then compile them both...I only see the the first class compiled in the directory (they are both being compiled into the same directory).
i.e. I run 'javac EventSite.java' and when I look in the c:\jdk1_3\bin\ directory I see EventSite.class.
I then run 'javac eventsite.java' and when I look in the same directory I only see EventSite.class. Why???????
Where did eventsite.class go?
Note: both .java files compile without error.
Help please.

Yes it is very strange. Both .java files compile clean yet the second one does not seem to create a .class file. If you are using Windows 98 you can do a simple test to see this...
Create a class with a simple method in it.
Save the file as 'Test.java' (capital 'T').
Compile it into a directory (c:\jdk1.3\bin\).
Using Windows Explorer, check the directory and see 'Test.class' exists.
Now go into the code of the same class and just change the name of the class and save as 'test.java' (lower case 't').
Compile it into the same directory (c:\jdk1.3\bin\).
Using Windows Explorer, check the directory and see 'Test.class' still exists, 'test.class' does not.
Note. If you delete 'Test.class' from the directory and then recompile 'test.java', you will then see 'test.class' in the directory.
It's very wierd and it isn't an issue with a particular computer either. I am taking a class in Java currently and everyone in the clas is having this issue...even the professor hasnt seen this before which is why I figured I would ask on here.
Any thoughts???? Thanks

Similar Messages

Help for compiling first Java script

Friends,
I am a begginer java programmer. Iam trying to compile a java script using .bat file which contains
c:\j2sdk\bin\javac -classpath <c:\j2sdk\lib\dt.jar> . ReadOnlyMaker.java
But it comes back with error as below
>c:\j2sdk\bin\javac -classpath ReadOnlyMaker.java 0<c:\j2sdk\lib\dt.jar 1>.
Access is denied.
I have admin rights on this machine but the directory j2sdk , where java is installed, is always staying readonly even after changing permissions in properties tab.
Not sure what is going wrong , Any one can Pl. help ?
Thanks,

First of all you don't need to be in the ..\..\bin directory to execute the javac.exe, java.exe, etc pgms as commands. If not already set up correctly, you can just add this to your System PATH.
Next, start by executing from the directory your .java PGM is in.
Then, what is that <...> stuff?
Lastly, if it's a .java file, it's a pgm file and not a javascript. Javascript goes is only for web work, embedded in html.
~Bill

Help with Compiling with ant

Hi,
I have a build.xml like this in current directory:
<?xml version="1.0"?>

<project name="Ant test project" default="build" basedir=".">
<target name="build" >
<javac srcdir="src" destdir="build/src" debug="true"
includes="**/*.java"
/>
</target>
</project>
There are a ".\src\test1.java" and a ".\build\src\".
When I type
ant
I got this message:
Buildfile: build.xml
BUILD SUCCESSFUL
Total time 0 seconds
But no test1.class was generated in the destination dir.
What is wrong? Please help. Thank you in advance.
myao1

Delete the original *.class, stupid!

Connection pooling issue with compiling with jdk 1.5.0

A
javax.naming.NameNotFoundException: Name jdbc is not bound in this Context exception occurs when I run my web app in Tomcat 5 using jdk 1.5. However, I don't get this problem with I use jdk 1.6.0. The mysql connector version is 3.1.1.4 and my server.xml file has been configured correctly. Any suggestions as to why this exception is occurring - I'm assuming it's a version issue but not sure how to solve it!

Use "java:comp/env/jdbc/DbUser" instead of just "jdbc/DbUser" for datasource config
See http://www.tek-tips.com/viewthread.cfm?qid=431734
The mysql connector version is 3.1.1.4Use a more recent jdbc driver
http://dev.mysql.com/downloads/connector/j/5.0.html
http://dev.mysql.com/doc/refman/5.0/en/connector-j-versions.html
Message was edited by:
java_2006

Must not combine new AIRSDK with Compiler with FLEX SDK?

Hi Guys
I've found this whole SDK overlay business a mess and very confusing. I've found this document
- http://www.adobe.com/devnet/air/articles/ane-android-devices.html
which states
'The distribution of the AIR SDK with ASC 2.0 is for pure ActionScript development only. It should not be combined with an existing Flex SDK.
To support Flex application development with newer versions of the AIR SDK, an AIR SDK overlay distribution that does not include ASC 2.0 needs to be overlaid over the Flex SDK bundled with Flash Builder 4.7.'
So if you are doing pure AS3 development there is no longer any need to do any 'overlaying' of one SDK Folder onto another. You just need to get the latest AIR SDK with complier ( http://www.adobe.com/devnet/air/air-sdk-download.html )
You should then update the AIR SDK if using Flash Builder via ( http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html ) (Note it still uses the term 'overlay' but you are not really overlaying but replacing).
Can someone from Adobe confirm please ?
Thanks

You must use Flex 2.0.1 Hotfix 3. No later version of Flex works. This means you must use Flex Builder 3 (with Flex 2.0.1 runtime for your project) and you cannot use Flash Builder 4.5.
This holds true for their 2008 Xcelsius version and their new 4.0 Dashboard version. Wish they'd update their runtime already...

Java Plug-In on Windows XP

Hello
I quit new on this. I have download and install java 1_4_0
Normaly when I make java program I use the Dos-prompt to compile with this command.
"c:\>javac HelloWorld.java" but in Windows XP HE there seems to be no javac compiler, what do I do wrong? In the dir there are no file like 'javac'. How do I compile my program under WindowsXP??
Please help me out.
email me: [email protected]
Thanks in advance

you must set the classpath enviroment variable of your XP in the right way.This means that you have to add the full path to where you have installed the sdk.A tip that could help you compile a java file from everywhere is to also add the "." in the classpath too.

Problem with compilation of HelloWorld.java

hi,
getting problem with compilation of HelloWorld.java
CLASSPATH--- C:\java
PATH--- C:\j2sdk1.4.2_04\bin
HelloWorld.java source code in: C:\java
On cmd prompt:
C:\java>javac HelloWorld.java
error: cannot read: HelloWorld.java
1 error
pls help me with this
rgds,
sanlearns

What does this command yield?
dir HelloWorld.java

Help Needed compile, deploy Web Service with Annotations on Web Logic 9.2

Hi,
I am new web logic and need some help in compiling, creating deployment file i.e. war, ear on Web Logic 9.2. I have the following sample web service with annotations code code but need help in compiling, creating deployment file (war,ear), creating proxy for testing etc. How to compile and create deployment files in WebLogic 9.2. Any help is really appreciated.
package sample_ws;
import java.rmi.RemoteException;
import javax.jws.*;
import javax.jws.soap.SOAPBinding;
import org.w3c.dom.Document;
@WebService
@SOAPBinding(style = SOAPBinding.Style.DOCUMENT, use = SOAPBinding.Use.LITERAL,
             parameterStyle = SOAPBinding.ParameterStyle.BARE)
public class EchoService {
    public EchoService() {
    @WebMethod(action="echo")
    @WebResult(targetNamespace="http://exa.org", name="echoResult")
    public Document echo(@WebParam(targetNamespace = "http://exa.org",
                                   name = "echoMsg")
        Document doc) throws RemoteException{
        return doc;
}Thanks

I am using Oracle Jdeveloper as an IDE and created a war file and deployed on Oracle App. Server it works fine. Now if I deploy the same war on Web Logic it gives me the following error:
java.lang.IllegalStateException: could not find schema type named {{http}//exa.org}>>echoResult
Errors were encountered while performing this operation. Here is the code I have:
package webservice2 ;
import java.rmi.RemoteException;
import javax.jws.*;
import javax.jws.soap.SOAPBinding;
import org.w3c.dom.Document;
@WebService
@SOAPBinding(style = SOAPBinding.Style.DOCUMENT,
             use = SOAPBinding.Use.LITERAL,
             parameterStyle = SOAPBinding.ParameterStyle.BARE)
public class EchoService {
    public EchoService() {
    @WebMethod(action="echo")
    @WebResult(targetNamespace="http://exa.org", name="echoResult")
    public Document echo(@WebParam(targetNamespace = "http://exa.org",
                                   name = "echoMsg")
        Document doc) throws RemoteException{
        return doc;
}And here is the wsdl file I have:
<definitions
     name="EchoServiceService"
     targetNamespace="http://webservice2/"
     xmlns="http://schemas.xmlsoap.org/wsdl/"
     xmlns:tns="http://webservice2/"
     xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
     xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
     xmlns:ns1="http://exa.org"
     xmlns:xsd="http://www.w3.org/2001/XMLSchema"
     xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    >
    <types>
        <schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://exa.org" elementFormDefault="qualified"
             xmlns:tns="http://exa.org" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
             xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/">
            <element name="echoMsg" nillable="true">
                <complexType>
                    <sequence>
                        <any/>
                    </sequence>
                </complexType>
            </element>
            <element name="echoResult" nillable="true">
                <complexType>
                    <sequence>
                        <any/>
                    </sequence>
                </complexType>
            </element>
        </schema>
    </types>
    <message name="EchoServicePortType_echo">
        <part name="echoMsg" element="ns1:echoMsg"/>
    </message>
    <message name="EchoServicePortType_echoResponse">
        <part name="echoResult" element="ns1:echoResult"/>
    </message>
    <portType name="EchoService">
        <operation name="echo">
            <input message="tns:EchoServicePortType_echo"/>
            <output message="tns:EchoServicePortType_echoResponse"/>
        </operation>
    </portType>
    <binding name="EchoServiceSoapHttp" type="tns:EchoService">
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
        <operation name="echo">
            <soap:operation soapAction="echo"/>
            <input>
                <soap:body use="literal" parts="echoMsg"/>
            </input>
            <output>
                <soap:body use="literal" parts="echoResult"/>
            </output>
        </operation>
    </binding>
    <service name="EchoServiceService">
        <port name="EchoServiceSoapHttpPort" binding="tns:EchoServiceSoapHttp">
            <soap:address location="http://localhost:8888/EnableSrc-WebService2-context-root/EchoServiceSoapHttpPort"/>
        </port>
    </service>
</definitions>Any ideas what might be wrong.

Latest 32-bit Java 7 compiled with /LARGEADDRESSAWARE?

While searching around, I didn't have a whole lot of success getting a clear answer, thus I appeal to this forum...
A customer of ours wants to continue using the 32-bit Java 7 VM on 64-bit Windows 2008, but would like to use as large a heap as possible. Has the Windows 32-bit Java 7 VM been compiled with /LARGEADDRESSAWARE? Is there any documentation about this?
Thanks,
-- Jim C

The 32-bit JVM for Windows is not compiled with LARGEADDRESSAWARE, and based upon recent space optimizations with Java 7, is likely not to be anytime soon. In the past, some avoided the 64-bit JVM if they didn't need the extra heap space because it incurred significant memory overhead. That is not necessarily the case now. In fact Oracle recommends using the 64-bit JVM even if your heap requirements don't exceed 4GB. Why?
1. The 64-bit JVM will automatically use 32-bit references on the heap when its size is below 4GB. The command-line switch -XX:+|-UseCompressedOops, available in Java 7, enables/disables this mode and by default is on. Not all internal pointers will be 32-bit, but nonetheless your application running in 64-bit mode should be much smaller than previous 64-bit versions. For a technical description, check out this article:
https://wikis.oracle.com/display/HotSpotInternals/CompressedOops
2. The 64-bit JVM has access to more registers and hence more opportunities for performance optimizations. This helps generate faster code.

Example code for java compiler with a simple GUI

There is no question here (though discussion of the code is welcome).
/* Update 1 */
Now available as a stand alone or webstart app.! The STBC (see the web page*) has its own web page and has been improved to allow the user to browse to a tools.jar if one is not found on the runtime classpath, or in the JRE running the code.
* See [http://pscode.org/stbc/].
/* End: Update 1 */
This simple example of using the JavaCompiler made available in Java 1.6 might be of use to check that your SSCCE is actually what it claims to be!
If an SSCCE claims to display a runtime problem, it should compile cleanly when pasted into the text area above the Compile button. For a compilation problem, the code should show the same output errors seen in your own editor (at least until the last line of the output in the text area).
import java.awt.BorderLayout;
import java.awt.Font;
import java.awt.EventQueue;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JLabel;
import javax.swing.JTextArea;
import javax.swing.JTextField;
import javax.swing.JButton;
import javax.swing.SwingWorker;
import javax.swing.border.EmptyBorder;
import java.util.ArrayList;
import java.net.URI;
import java.io.ByteArrayOutputStream;
import java.io.OutputStreamWriter;
import javax.tools.ToolProvider;
import javax.tools.JavaCompiler;
import javax.tools.SimpleJavaFileObject;
/** A simple Java compiler with a GUI. Java 1.6+.
@author Andrew Thompson
@version 2008-06-13
public class GuiCompiler extends JPanel {
/** Instance of the compiler used for all compilations. */
JavaCompiler compiler;
/** The name of the public class. For 'HelloWorld.java',
this would be 'HelloWorld'. */
JTextField name;
/** The source code to be compiled. */
JTextArea sourceCode;
/** Errors and messages from the compiler. */
JTextArea output;
JButton compile;
static int pad = 5;
GuiCompiler() {
    super( new BorderLayout(pad,pad) );
    setBorder( new EmptyBorder(7,4,7,4) );
/** A worker to perform each compilation. Disables
the GUI input elements during the work. */
class SourceCompilation extends SwingWorker<String, Object> {
    @Override
    public String doInBackground() {
      return compileCode();
    @Override
    protected void done() {
      try {
        enableComponents(true);
      } catch (Exception ignore) {
/** Construct the GUI. */
public void initGui() {
    JPanel input = new JPanel( new BorderLayout(pad,pad) );
    Font outputFont = new Font("Monospaced",Font.PLAIN,12);
    sourceCode = new JTextArea("Paste code here..", 15, 60);
    sourceCode.setFont( outputFont );
    input.add( new JScrollPane( sourceCode ),
      BorderLayout.CENTER );
    sourceCode.select(0,sourceCode.getText().length());
    JPanel namePanel = new JPanel(new BorderLayout(pad,pad));
    name = new JTextField(15);
    name.setToolTipText("Name of the public class");
    namePanel.add( name, BorderLayout.CENTER );
    namePanel.add( new JLabel("Class name"), BorderLayout.WEST );
    input.add( namePanel, BorderLayout.NORTH );
    compile = new JButton( "Compile" );
    compile.addActionListener( new ActionListener() {
        public void actionPerformed(ActionEvent ae) {
          (new SourceCompilation()).execute();
    input.add( compile, BorderLayout.SOUTH );
    this.add( input, BorderLayout.CENTER );
    output = new JTextArea("", 5, 40);
    output.setFont( outputFont );
    output.setEditable(false);
    this.add( new JScrollPane( output ), BorderLayout.SOUTH );
/** Compile the code in the source input area. */
public String compileCode() {
    output.setText( "Compiling.." );
    enableComponents(false);
    String compResult = null;
    if (compiler==null) {
      compiler = ToolProvider.getSystemJavaCompiler();
    if ( compiler!=null ) {
      String code = sourceCode.getText();
      String sourceName = name.getText().trim();
      if ( sourceName.toLowerCase().endsWith(".java") ) {
        sourceName = sourceName.substring(
          0,sourceName.length()-5 );
      JavaSourceFromString javaString = new JavaSourceFromString(
        sourceName,
        code);
      ArrayList<JavaSourceFromString> al =
        new ArrayList<JavaSourceFromString>();
      al.add( javaString );
      ByteArrayOutputStream baos = new ByteArrayOutputStream();
      OutputStreamWriter osw = new OutputStreamWriter( baos );
      JavaCompiler.CompilationTask task = compiler.getTask(
        osw,
        null,
        null,
        null,
        null,
        al);
      boolean success = task.call();
      output.setText( baos.toString().replaceAll("\t", " ") );
      compResult = "Compiled without errors: " + success;
      output.append( compResult );
      output.setCaretPosition(0);
    } else {
      output.setText( "No compilation possible - sorry!" );
      JOptionPane.showMessageDialog(this,
        "No compiler is available to this runtime!",
        "Compiler not found",
        JOptionPane.ERROR_MESSAGE
      System.exit(-1);
    return compResult;
/** Set the main GUI input components enabled
according to the enable flag. */
public void enableComponents(boolean enable) {
    compile.setEnabled(enable);
    name.setEnabled(enable);
    sourceCode.setEnabled(enable);
public static void main(String[] args) throws Exception {
    Runnable r = new Runnable() {
      public void run() {
        JFrame f = new JFrame("SSCCE text based compiler");
        f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
        GuiCompiler compilerPane = new GuiCompiler();
        compilerPane.initGui();
        f.getContentPane().add(compilerPane);
        f.pack();
        f.setMinimumSize( f.getSize() );
        f.setLocationRelativeTo(null);
        f.setVisible(true);
    EventQueue.invokeLater(r);
* A file object used to represent source coming from a string.
* This example is from the JavaDocs for JavaCompiler.
class JavaSourceFromString extends SimpleJavaFileObject {
* The source code of this "file".
final String code;
* Constructs a new JavaSourceFromString.
* @param name the name of the compilation unit represented
    by this file object
* @param code the source code for the compilation unit
    represented by this file object
JavaSourceFromString(String name, String code) {
    super(URI.create(
      "string:///" +
      name.replace('.','/') +
      Kind.SOURCE.extension),
      Kind.SOURCE);
    this.code = code;
@Override
public CharSequence getCharContent(boolean ignoreEncodingErrors) {
    return code;
}Edit 1:
Added..
        f.setMinimumSize( f.getSize() );Edited by: AndrewThompson64 on Jun 13, 2008 12:24 PM
Edited by: AndrewThompson64 on Jun 23, 2008 5:54 AM

kevjava wrote: Some things that I think would be useful:
Suggestions reordered to suit my reply..
kevjava wrote: 2. Line numbering, and/or a line counter so you can see how much scrolling you're going to be imposing on the forum readers.
Good idea, and since the line count is only a handful of lines of code to implement, I took that option. See the [line count|http://pscode.org/stbc/help.html#linecount] section of the (new) [STBC Help|http://pscode.org/stbc/help.html] page for more details. (Insert plaintiff whining about the arbitrary limits set - here).
I considered adding line length checking, but the [Text Width Checker|http://pscode.org/twc/] ('sold separately') already has that covered, and I would prefer to keep this tool more specific to compilation, which leads me to..
kevjava wrote: 1. A button to run the code, to see that it demonstrates the problem that you wish for the forum to solve...
Interesting idea, but I think that is better suited to a more full blown (but still relatively simple) GUId compiler. I am not fully decided that running a class is unsuited to STBC, but I am more likely to implement a clickable list of compilation errors, than a 'run' button.
On the other hand I am thinking the clickable error list is also better suited to an altogether more abled compiler, so don't hold your breath to see either in the STBC.
You might note I have not bothered to update the screenshots to show the line count label. That is because I am still considering error lists and running code, and open to further suggestion (not because I am just slack!). If the screenshots update to include the line count but nothing else, take that as a sign. ;-)
Thanks for your ideas. The line count alone is worth a few Dukes.

XI Mail Adapter: sending emails with attachment with help of java mapping

Hi ,
On trying out the scenerio mentioned in the blog, using the java mapping provided
"XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
The scenerio works just fine.
But the payload as the content of the attachment is not getting generated in proper XML format.
I suppose it's because of the replace special characters code part..
Can anyone help me state the modification required in the code.
Thanks!
Regards,
Faria Mithani

It might be a codepage issue. Is your original payload UTF-8?

Need help with mac and java

Hi, I'm trying to develop an application on a Machintosh OSX 10.2.8 machine.
I'm having a herrendous time trying to get quicktime to work on it.
I've somehow managed t oget 1.3.1 and QTJava.jar to work together but now i need encryption, however that requires 1.4+
Now 1.4.1 doesnt work with quicktime
I've downloaded the latest software upgrades but Ive got no idea how to set up quicktime to work with java 1.4.1
Now to add on top of that mac reports it can use AES encryption. this is from source code ripped striaght from this website.
But first and foremost can anyone, annyonee help me out with setting up 1.4.1 with quicktime?
Thank you

If you need encryption with Java 1.3.1, download the JCE from either Sun (http://java.sun.com/products/jce/) or Bouncy Castle (http://www.bouncycastle.org/).
Cheers,
--Arnout

Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, don´t work with UCCX 10.5

I have a Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, after upgrade it don´t work with UCCX 10.5
I get the error message: "Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL.; nested exception is: javax.xml.ws.WebServiceException: Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. (line: 1, col: 47)
Does anyone know about this ?

Did you ever find a resolution to this issue? I have a similar issue after upgrading from 7 to 10.5. I have loaded all provided certificates to the tomcat-trust store, restarted Tomcat Services and still get the same error
Thanks

Java 6u24 won't launch signed JNLP app with classes compiled with JDK 1.4.2

Anyone else having a problem launching a JNLP app compiled with Java 1.4 using Java 6u24 on the client? Anyone have a Java 1.4-compiled app that does launch with Java 6u24?
I am, and I have isolated the problem to some change in 6u24's java web start launching logic. The splash screen appears and then javaws just quits with no error. Trace shows it is not getting past checking of the first .jar. My JNLP app, fully signed with CA-issued certificate, when compiled with Java 1.4.2 will not launch on JRE 6u24 (or 6u25-b03). The same exact app launches perfectly fine when it is compiled with JDK 1.5 or 1.6. It is not a signing problem, though it is related to certificate checking logic or a concurrency flaw in javaws' AppPolicy and TrustDecider classes. It is not a host server or network problem as those have been varied with same results. It is not a specific .jar problem as I have varied what is the first .jar with same results. I have eliminated all other variables to find the only difference is what Java version the app is compiled with. Well, all but one other variable - I have not tried with apps other than mine.
My app is compiled with JDK 1.4.2 so I can still support older platforms. That requirement is going away soon but this is still a regression from 6u23 that is causing a big problem for at least this developer.

You can try to use the version of the jarsigner JDK 1.5 or later.
Has changed the management of files in META-INF.
So compile with 1.4 but sign with 1.5 or later

Help!Apache compiling with gcc in Solaris 10

Greetings
I am having problems with Apache 1.3.
When I am running the script ./src/Configure my output is:
#./Configure
Using config file: Configuration
Creating Makefile
+ configured for Solaris 2100 platform
+ setting C pre-processor to gcc -E
+ using "tr [a-z] [A-Z]" to uppercase
+ checking for system header files
+ adding selected modules
./helpers/TestCompile: make: not found
+ using builtin Expat
./Configure: make: not found
+ checking sizeof various data types
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
+ doing sanity check on compiler and options
./helpers/TestCompile: make: not found
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
./helpers/TestCompile: make: not found
============= End of Error Report =============
Aborting!
I am root, my PATH is
/usr/bin:/usr/ucb:/etc:/usr/local/bin:/opt/netscape:/usr/css/bin/:/bin:/usr/openwin/bin:/usr/sbin:/
I am missing something stupid, I know but I can't find it!!!!Help please I am a newbie.
I am curious. Has anyone been able to compile succesfully apache server with gcc in Solaris 10?
Thanks,

Thanks,
It was only that.!!!
But now I have the following problem, I can't create executables when I type make. The output is:
when I am in the src/folder
#make
===> regex
<=== regex
===> os/unix
gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED os.c
In file included from /usr/include/sys/wait.h:24,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1096,
from os.c:21:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `os.o'
Current working directory /web-download/apache_1.3.33/src/os/unix
*** Error code 1
The following command caused the error:
for i in regex os/unix ap main lib modules; do \
echo "===> $i"; \
case ".Solaris 2100" in \
.OS390 | .TPF) ( cd $i && make SDP='' OPTIM='') || exit 1;; \
*) ( cd $i && make SDP='' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED ' RANLIB='ranlib' OPTIM='') || exit 1;; \
esac; \
echo "<=== $i"; \
done
make: Fatal error: Command failed for target `subdirs'
but when I am typing one step up is.
===> src
===> src/regex
<=== src/regex
===> src/os/unix
gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED os.c
In file included from /usr/include/sys/wait.h:24,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1096,
from os.c:21:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `os.o'
Current working directory /web-download/apache_1.3.33/src/os/unix
*** Error code 1
The following command caused the error:
for i in regex os/unix ap main lib modules; do \
echo "===> src/$i"; \
case ".Solaris 2100" in \
.OS390 | .TPF) ( cd $i && make SDP='src/' OPTIM='') || exit 1;; \
*) ( cd $i && make SDP='src/' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED ' RANLIB='ranlib' OPTIM='') || exit 1;; \
esac; \
echo "<=== src/$i"; \
done
make: Fatal error: Command failed for target `subdirs'
Current working directory /web-download/apache_1.3.33/src
*** Error code 1
The following command caused the error:
case "xi86pc-sun-solaris2.2100" in \
x*390*) C89STEPS="0xffffffff"; export C89STEPS;; \
esac; \
cd ./src; make SDP=src/ all
make: Fatal error: Command failed for target `build-std'
Current working directory /web-download/apache_1.3.33
*** Error code 1
The following command caused the error:
make -f ./Makefile root= build-std
make: Fatal error: Command failed for target `build'
I am newbie with Solaris and gcc so I have no so much idea what is missing there.
Thanks,
Juan

Help with compiling with Java 1.3 in Windows 98

Similar Messages

Maybe you are looking for